atomization and sprays
Post on 23-Nov-2014
976 Views
Preview:
TRANSCRIPT
ATOMIZATION & SPRAYS
http://www.begellhouse.com/journals/6a7c7e10642258cc.html
Volume 13, Numbers 4 (2003)• A TECHNIQUE FOR DROP SIZE CONTROL DURING THROTTLING OF A ROCKET ENGINEN. Jayan, B. N. Raghunandan
• BREAKUP OF LIQUID DROPLETS IN ACCELERATED GAS FLOWSF. Schmelz, P. Walzel
• TRANSIENT MULTIDIMENSIONAL MODELING OF AIR-BLAST ATOMIZERSDavid P. Schmidt, Louis M. Chiappetta, Graham M. Goldin, Ravi K. Madabhushi
• ULTRASOUND-MODULATED TWO-FLUID ATOMIZATION OF VISCOUS NEWTONIAN LIQUIDSMaha Yamak, Shirley C. Tsai, Ken Law
• A MODEL FOR NUMERICAL SIMULATION OF BREAKUP OF A LIQUID JET IN CROSSFLOWRavi K. Madabhushi
Volume 13, Numbers 2&3 (2003)
• A DISCRETE MULTICOMPONENT FUEL MODELD. J. Torres, P. J. O'Rourke, A. A. Amsden
• ELECTROHYDRODYNAMICS OF CHARGE INJECTION ATOMIZATION: REGIMES AND FUNDAMENTAL LIMITSJ. S. Shrimpton, Andrew J. Yule
• SHEET ATOMIZATION OF NON-NEWTONIAN LIQUIDSThomas J. Hartranft, Gary S. Settles
• EXPERIMENTAL INVESTIGATIONS OF SPRAY/WALL IMPINGEMENTW. S. Mathews, C. F. Lee, J. E. Peters
• DROPLET EVAPORATION CORRECTIONS FOR AERIAL SPRAY DRIFT MODELING I: THEORETICALCONSIDERATIONSMilton E. Teske, Andrew E. Kaufman, Harold W. Thistle, Andrew J. Hewitt, David L. Valcore
• DEVELOPMENT AND ASSESSMENT OF A HYBRID DROPLET COLLISION MODEL FOR TWO IMPINGING SPRAYSGwon Hyun Ko, Seong Hyuk Lee, Hong Sun Ryou, Young Ki Choi
• A METHOD TO ESTIMATE GAS-DROPLET VELOCITY CROSS-CORRELATIONS IN SPRAYSY. Hardalupas, S. Horender
• EFFECTS OF A SMALL STEP IN AN ORIFICE ON LIQUID JET BREAKUPThomas J. Hoverman, David Ong, Che-Ping Yeh, Steven H. Collicott
• ON QUANTIFYING INTERFACIAL THERMAL RESISTANCE AND SURFACE ENERGY DURING MOLTENMICRODROPLET SURFACE DEPOSITIOND. Attinger, D. Poulikakos
• EFFECT OF SOLID PARTICLE CHARACTERISTICS ON SUSPENSION ATOMIZATIONBasel Mulhem, Udo Fritsching, Gunther Schulte, Klaus Bauckhage
Volume 12, Numbers 5&6 (2002)
• DYNAMICS OF EVAPORATING CAPILLARY JETSF. Mashayek, J. D. Zeda
• A PARAMETRIC STUDY OF WATER COLUMN DEFORMATION RESULTING FROM SHOCK WAVE LOADINGD. Igra, T. Ogawa, K. Takayama
• SPRAYING ANGLE AND SPRAY POLYDISPERSITY IN MODELING OF THE AERODYNAMIC CHARACTERISTICS OFFGD TOWERSJacek A. Michalski
• SECONDARY DROP BREAKUP IN SWIRL ATOMIZERSYuriy Khavkin
• DROPLET SIZE DISTRIBUTION IN SWIRL ATOMIZERSYuriy Khavkin
• CONTROLLING DROPLET SIZE DISTRIBUTION IN SWIRL ATOMIZERSYuriy Khavkin
• INVESTIGATION OF BREAKUP OF TURBULENT CRYOGENIC VARIABLE-DENSITY JETSW. Mayer, J. Telaar
• A ONE-DIMENSIONAL BREAKUP MODEL FOR LOW-SPEED JETSRolf D. Reitz, Yong Yi
• SPRAY MODELING USING LAGRANGIAN DROPLET TRACKING IN A HOMOGENEOUS FLOW MODELS. D. Heister, T. L. Pham
• SMALL WAVES ON THE JET "INTACT LENGTH:" RESULTS USING A NEW EXPERIMENTAL TECHNIQUEFrancisco Ruiz
• DIRECT INTERFACE TRACKING OF DROPLET DEFORMATIONMeizhong Dai, J. Blair Perot, David P. Schmidt, Haoshu Wang
• DIESEL SPRAY IMPINGING ON A FLAT WALL, PART I: CHARACTERISTICS OF ADHERED FUEL FILM IN ANIMPINGEMENT DIESEL SPRAYMasataka Arai, Kyungnam Ko
• DIESEL SPRAY IMPINGING ON A FLAT WALL. PART II: VOLUME AND AVERAGE AIR-FUEL RATIO OF ANIMPINGEMENT DIESEL SPRAYMasataka Arai, Kyungnam Ko
• NUMERICAL STUDY OF THE COANDA EFFECT IN A ROTATING SPRAY PAINT ATOMIZERPh. Marty, P. Olivas
Volume 12, Numbers 4 (2002)
• APPLICATION OF ARTIFICIAL NEURAL NETWORKS MODELING TO SPRAYS AND SPRAY IMPINGEMENT HEATTRANSFERM. A. Aamir, M. M. Awais, A. P. Watkins
• IMPROVED TAB MODEL FOR PREDICTION OF SPRAY DROPLET DEFORMATION AND BREAKUPSang-Soon Hwang, Jong-Hoon Park, Youngbin Yoon
• THE CHARACTERISTICS OF POSTIMPINGEMENT DIESEL SPRAY, PART I: PENETRATION AND VOLUMEMasataka Arai, Kyungnam Ko
• THE CHARACTERISTICS OF POSTIMPINGEMENT DIESEL SPRAY, PART II: EMPIRICAL EQUATION OFPENETRATIONMasataka Arai, Kyungnam Ko
• CHARACTERISTICS OF INTERIMPINGEMENT DIESEL SPRAYKenji Amagai, Masataka Arai, Takayuki Chiba, Masahiro Saito
• APPLICATION OF HOUGH TRANSFORM TO IMAGE PROCESSING OF HEAVILY OVERLAPPED PARTICLES WITHSPHERICAL SHAPESYu Dong Kim, Sang Yong Lee
• NUMERICAL STUDIES OF AIR-ASSISTED SPRAYSDar-Lon Chang, Chia-fon F. Lee
• BREAKUP TRANSITIONS WITHIN DENSE SPRAYSJean-Pierre Delplanque, Derek Dunn-Rankin, Corinne S. Lengsfeld
• EXTENDING THE DYNAMIC RANGE OF PHASE DOPPLER INTERFEROMETRY MEASUREMENTSStefan D. Leigh, Cary Presser, John F. Widmann
• DYNAMIC STRUCTURE OF DIRECT-INJECTION GASOLINE ENGINE SPRAYS: AIR FLOW AND DENSITY EFFECTSC. Arcoumanis, J. T. Kashdan, J. S. Shrimpton
Volume 12, Numbers 1-3 (2002)• MODELING OF GASOLINE SPRAY IMPINGEMENTC. X. Bai, H. Rusche, A. D. Gosman
• BRACHIAL BURNING AND GASIFICATION SPLIT OF A CONVECTING TWO-DROPLET SYSTEMWei-Hsin Chen
• BREAKUP AND ATOMIZATION OF A KEROSENE JET IN CROSSFLOWAT ELEVATED PRESSUREJulian Becker, Christoph Hassa
• CHARACTERIZATION OF A RESIDENTIAL FIRE SPRINKLER USING PHASE DOPPLER INTERFEROMETRYJohn F. Widmann
• SPREADING ANGLE AND CENTERLINE VARIATION OF DENSITY OF SUPERCRITICAL NITROGEN JETSM. Oschwald, Michael M. Micci
• EXPERIMENTAL STUDY AND NEURAL NETWORK MODELING OF THE LIGAMENT DISINTEGRATION IN ROTARYATOMIZATIONStephan Sternowsky, Gunther Schulte, Roberto Guardani, Claudio A. 0. Nascimento
• STABILITY BOUNDARIES OF LAMINAR PREMIXED POLYDISPERSE SPRAY FLAMESJ. B. Greenberg
• SPRAY EVAPORATIONMilan Marcic
• A PREFERENTIAL VAPORIZATION MODEL FOR MULTICOMPONENT DROPLETS AND SPRAYSYangbing Zeng, Chia-fon F. Lee
• THE SPRAY-INDUCED FLOW AND ITS EFFECT ON THE TURBULENT CHARACTERISTIC COMBUSTION TIME IN DlDIESEL ENGINESFranz X. Tanner, Rolf D. Reitz
• EFFECT OF INJECTION GAS DENSITY ON COAXIAL LIQUID JET ATOMIZATIONE. Porcheron, J. L. Carreau, L. Prevost, D. Le Visage, F. Roger
• A COMPARISON OF SPRAY CHARACTERISTICS BETWEEN AN AIR-ASSISTED FUEL INJECTOR AND A HIGH-PRESSURE SWIRL INJECTOR FOR GASOLINE DIRECT-INJECTION ENGINE APPLICATIONC. Jang, S. Choi
• NUMERICAL SIMULATION OF DROPLET FORMATION FROM COAXIAL TWIN-FLUID ATOMIZERTakao Inamura, Masatoshi Daikoku
• CONVERSION OF DROPLET SIZE DISTRIBUTIONS FROM PMS OPTICAL ARRAY PROBE TO MALVERN LASERDIFFRACTIONMilton E. Teske, Harold W. Thistle, Andrew J. Hewitt, I. W. Kirk
• TWO-STEP START TRANSIENTS WITH LONG FEEDLINES DISCHARGING LIQUID THROUGH SHARP-EDGEDCYLINDRICAL NOZZLESK. Ramamurthi, K. Nandakumar, R. Patnaik
• THE INFLUENCE OF VISCOELAST1C FLUID PROPERTIES ON SPRAY FORMATION FROM FLAT-FAN ANDPRESSURE-SWIRL ATOMIZERSM. Stelter, G. Brenn, F. Durst
•THEORETICAL INVESTIGATION ON VARIABLE-DENSITY SPRAYSA. de Risi, T. Donateo, D. Laforgia
Volume 11, Numbers 6 (2001)
• PREDICTING DROP SIZE DISTRIBUTIONS FROM FIRST PRINCIPLES FOR NON-NEWTONIANFLUIDSE. Babinsky, P. E. Sojka
• DEVELOPMENT OF A EULERIAN MODEL FOR THE “ATOMIZATION” OF A LIQUID JETR. Borghi, A. A. Burluka, A. Vallet
• ANALYSIS OF A SEA SPRAY: EFFECT OF SIMULTANEOUS GROWTH AND FRAGMENTATION ONDROPLET/PARTICLE SIZE DISTRIBUTION OF A MULTICOMPONENT AEROSOLDavid Katoshevski
• MOLECULAR DYNAMICS SIMULATIONS OF MICROMETER-SCALE DROPLET VAPORIZATIONTeresa L. Kaltz, Lyle N. Long, Michael M. Micci
• FLUX MEASUREMENTS IN SPRAYS USING PHASE DOPPLER TECHNIQUESIlia V. Roisman, Cam Tropea
• PULSED SPRAYS FROM OVERSIZED ORIFICES FOR INCREASED MOMENTUM AND KINETICENERGY IN DEPOSITING AGRICULTURAL SPRAYSP. G. Andersen, D. K. Giles, M. Nilars
• IDENTIFYING BURST SPLITTING EVENTS IN PHASE DOPPLER INTERFEROMETRYMEASUREMENTSStefan D. Leigh, Cary Presser, John F. Widmann
• DEPENDENCE OF SPRAYING PERFORMANCE ON THE INTERNAL FLOW PATTERN INEFFERVESCENT ATOMIZERSJoo Youn Kim, Sang Yong Lee
• ABOUT SWIRL ATOMIZER MEAN DROPLET SIZEYuriy Khavkin
• EXPERIMENTS ON AIR-ASSIST SPRAY AND SPRAY FLAMESDong Il Kim, Sang Heun Oh, Min Su Paek
Volume 11, Numbers 5 (2001)
Absolute and Convective Instability of Annular Viscous Liquid Jets in Gas StreamsJihua Shen & Xianguo Li
The Stochastic Lagrangian Model of Drop Breakup in the Computation of Liquid SpraysM. Gorokhovski
Development of an Eulerian Model for the Atomization of a Liquid JetA. Vallet, A. A. Burluka, & R. Borghi
In Situ Observation of Microexplosion of Emulsion Droplets in Spray FlamesYukio Mizutani, Manabu Fuchihata, & Masaaki Muraoka
Liquid and Vapor Spray Structure in High Pressure Common Rail Diesel InjectionGilles Bruneaux
Experiments on Annular Liquid Jet BreakupXianguo Li & Jihua Shen
Physical Processes Influencing Effervescent Atomizer Performance in the Slug and AnnularFlow RegimesClive A. Catlin & Jim Swithenbank
Volume 11, Numbers 4 (2001)
Spray Evolution of a Coflowing Round Liquid Jet in High-Speed Air FlowA. P. Johnston and K. M. Isaac
Determination of In-Focus Criteria and Depth of Field in Image Processing of Spray Particles
Kwang Uoong Koh, Joo Youn Kim, and Sang Yong Lee
On the Influence of Internal Flow Structure on Performance of Plain-Orifice AtomizersChanghai Xu, R. A. Bunnell, and S. D. Heister
Molecular Dynamics Simulations of Atomization and Spray PhenomenaMichael M. Micci, Teresa L. Kaltz, and Lyle N. Long
Atomization, Combustion, and Control of Charged Hydrocarbon SpraysJ. S. Shrimpton and A. J. Yule
Simulating Droplet Impact on a Substrate of Arbitrary ShapeM. Pasandideh-Fard, M. Bussmann, S. Chandra, and J. Mostaghimi
Toward a Control Model for Manipulating the Breakup of a Liquid JetB. A. Strayer and D. Dunn-Rankin
Experimental Study of the Transition to the Fully Developed Regime in a Spray From a Plain JetAtomizerT. Boëdec, J. L. Marié, and J. C. Champoussin
On the Prediction and Structures of Wide-Angle Full-Cone Liquid SpraysS. J. Walmsley, A. P. Watkins, and A. J. Yule
Quantitative Measurements of Diesel Fuel Spray Characteristics in the Near-Nozzle RegionUsing X-Ray AbsorptionYong Yue, Christopher F. Powell, Ramesh Poola, Jin Wang, and Johannes K. Schaller
Volume 11, Numbers 3 (2001)
Measurement of Breakup Length of Cylindrical Liquid Jets. Application to Low-Pressure CarInjectorChristophe Dumouchel
Experimental Investigation of the Drop Size Distribution of Sprays Produced by a Low-VelocityNewtonian Cylindrical Liquid JetHélène Malot and Christophe Dumouchel
An Approach for Determining Confidence Intervals for Common Spray StatisticsR. M. Wagner and J. A. Drallmeier
Droplet Formation and Size Distributions from an Immiscible Interface Impinged with a VerticalNegatively Buoyant JetP. D. Friedman, A. L. Winthrop, and J. Katz
The Kinetic-Sectional Approach for Noncolliding Evaporating SpraysKomla Domelevo
Volume 11, Numbers 2 (2001)
Detailed Investigation of the Influence of Fluid Viscosity on the Performance Characteristics ofPlain-Orifice Effervescent AtomizersM. E. Ferreira, J. C. F. Teixeira, C. J. Bates, and P. J. Bowen
Enhancement of the Atomization of a Liquid Jet by Cavitation in a Nozzle HoleN. Tamaki, M. Shimizu, and Hiro Hiroyasu
Linear Instability Analysis of the Viscous Longitudinal Perturbation on an Air-Blasted LiquidSheetFélix Barreras, Antonio Lozano, and César Dopazo
Outcomes From a Drop Impact on Solid SurfacesR. Rioboo, C. Tropea, and M. Marengo
Investigation of Aerodynamic Breakup of a Cylindrical Water DropletD. Igra and K. Takayama
Numerical Investigation of a Steady Nonevaporating Hollow-Cone Spray Interacting with anAnnular Air JetWoo Tae Kim, Kang Y. Huh, Jacob A. Friedman, and Metin Renksizbulut
Volume 11, Numbers 1 (2001)
Effect of Liquid Properties on the Breakup Mechanism of High-Speed Liquid DropsChang Sik Lee and Rolf D. Reitz
The Influence of Eccentricity on the Performance of a Coaxial Prefilming Air-Assist AtomizerAndreas Glathe, Günter Wozniak, and Thomas Richter
Spray Structure and Characteristics of High-Pressure Gasoline Injectors for Direct-InjectionEngine ApplicationsChang Sik Lee, Ki Hyung Lee, Mun Soo Chon, and Dae Sik Kim
Three-Dimensional Temporal Instability of Non-Newtonian Liquid SheetsGünter Brenn, Zhengbai Liu, and Franz Durst
Development of a New Model and Heat Transfer Analysis of Impinging Diesel Sprays on a WallSeong Hyuk Lee and Hong Sun Ryou
Volume 10, Numbers 6 (2000)
Considerations on the Gas-Phase Velocity Field in a Nonevaporating Diesel SprayM. L. Sanchez, F. Castro, F. V. Tinaut, and A. Melgar
Visualization of Internal Flow in a Cavitating Slot OrificeMark E. Henry and Steven H. Collicott
Mutual Electrostatic Interactions Between Closely Spaced Charged SolderDroplets Qingbin Liu, Changzheng Huang, and Melissa Orme
Prediction of Drop Size Distributions from First Principles: Joint PDF EffectsSandeep D. Sovani, Paul E. Sojka, and Yudaya R. Sivathanu
Mean Structure and Droplet Behavior in a Coaxial Airblast Atomized Spray: Self-Similarity andVelocity Decay Functions M. de Vega,P. Rodriguez, and A. Lecuona
The Performance Characteristics of Solid-Cone-Spray Pressure-Swirl AtomizersA.J. Yule, R. A. Sharief, J. R. Jeong, G. G. Nasr, and D. D. James
Volume 10, Numbers 3-5 (2000)
Spray and Combustion Modeling in Gasoline Direct-Injection EnginesLi Fan and Rolf D. Reitz
Fifty Years of Gas Turbine Fuel InjectionArthur Lefebvre
Generalized Lorenz-Mie Theories, From Past to FutureG. Gouesbet and G. Gréhan
Toward a Comprehensive Theory of Dense Spray FlowsC.F. Edwards
Views on the Structure of Transient Diesel SpraysGregory J. Smallwood and Ömer L. Gülder
Modeling of Spray Impact on Solid SurfacesC. Tropea and I. V. Roisman
Perspectives on Large Eddy Simulations for Sprays: Issues and SolutionsJosette Bellan
Fuel Atomization for Next-Generation Gas Turbine CombustorsM.A. Benjamin
Spray Diagnostics for the Twenty-First CenturyW.D. Bachalo
Improving Droplet Breakup and Vaporization Models by Including HighPressure and Turbulence EffectsI. Gökalp, C. Chauveau, C. Morin, B. Vielle, M. Birouk
Spray Breakup Mechanism From the Hole-Type Nozzle and Its ApplicationsHiro Hiroyasu
Volume 10, Number 2 (2000)
Development of Droplet Size Distribution in FGD Spray TowersJacek A. Michalski
The Internal Flow and Exit Conditions of Pressure Swirl AtomizersA.J. Yule and J.J. Chinn
Droplet Size Scaling of Agricultural Spray Material by Dimensional AnalysisMilton E. Teske and Harold W. Thistle
Characterization of Prototype High-Pressure Swirl Injector Nozzles, Part I:Prototype Development and Initial Characterization of SpraysChangsoo Jang, Choongsik Bae, and Sangmin Choi
Characterization of Prototype High-Pressure Swirl Injector Nozzles, Part II:CFD Evaluation of Internal FlowChangsoo Jang, Choongsik Bae, and Sangmin Choi
An Experimental and Analytical Study of the Spray Characteristics of anIntermittant Air-Assisted Fuel InjectorChangsoo Jang, Sungsoo Kim, and Sangmin Choi
Volume 10, Number 1 (2000)
Atomization Quality in the Cylinder of a Port-Injected Spark-Ignition EngineP.L. Kelly-Zion, J.P. Styron, C.F. Lee, R.P. Lucht, J.E. Peters, and R.A. White
Gas Flow Effects on Twin-Fluid Atomization of Liquid MetalsUlrich Heck, Udo Fritsching, and Klaus Bauckhage
Euler/Lagrange Calculations of Turbulent Sprays: The Effect of Droplet Collisions andCoalescenceM. Rüger, S. Hohmann, M. Sommerfeld, and G. Kohnen
Air Flow and Droplet Motions Produced by the Interaction of Flat-Fan Sprays and Cross FlowsJ.C. Phillips, P.C.H. Miller, and N.H. Thomas
Volume 9, Number 6 (1999)
Valve-Covered Orifice (VCO) Fuel Injection Nozzle Delivery AnalysisEdward D. Klomp
Atomizers for Molten Metals: Macroscopic Phenomena and Engineering AspectsL.A. Núñez, T. Lobel, and R. Palma
Production of Highly Uniform Solder Spheres Using a Digital Integral Control SchemeJuan C. Rocha and Jung-Hoon Chun
Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid ModelJennifer C. Beale and Rolf D. Reitz
Effervescent Atomization at Injection Pressures in the MPa RangeRobert A. Wade, Jennifer M. Weerts, Paul E. Sojka, Jay P. Gore, and W.A. Eckerle
Volume 9, Number 5 (1999)
Cavitating Injector Flows: Validation of Numerical Models andSimulatinos of Pressure AtomizersR.A. Bunnell, S.D. Heister, C. Yen, and S.H. Collicott
Transient 3D Analysis of a DI Gasoline Injector SprayM.A. Comer, P.J. Bowen, C.J. Bates, S.M. Sapsford, and R.J.R. Johns
Uniformity of Swirled Sprays Formed with Nozzles of Varying Surface RoughnessK. Ramamurthi and R. Patnaik
Modeling the Effects of Gas Density on the Drop Trajectory andBreakup Size of High-Speed Liquid DropsC.H. Lee and Rolf D. Reitz
Linear Spatial Stability Analysis of Slurry Sheets Subjected to Gas FlowR.N. Parthasarathy
Volume 9, Number 4 (1999)
Detection of Aerodynamic Effects in Liquid Jet Breakup and Droplet FormationMichael P. Moses, Steven H. Collicott, and Stephen D. Heister
Imaging Measurement of the Structure of a Twin Overlapping Spray for Ice-Slurry MakingJongsoo Jurng, Chan Woo Park, and Chan Bum Park
A Theory on Excess-Energy EnthalpyShuhn-Shyurng Hou and Ta-Hui Lin
High-Energy-Density Fuel Blending Strategies and Drop Dispersion forFuel Cost Reduction and Soot Propensity ControlJ. Bellan and K. Harstad
Dilute Emulsions and Their Effect on the Breakup of the Liquid SheetProduced Produced by Flat-Fan Spray NozzlesM.C. Butler Ellis, C.R. Tuck, and P.C.H. Miller
Atomization Characteristics of Jet-to-Jet and Spray-to-Spray Impingement SystemsMasataka Arai and Masahiro Saito
Turbulence Under Quasi-cavitating Conditions: A New Species?Francisco Ruiz and Lu He
Numerical Studies of Sprays Impacting Normally on an Infinite PlateK. Su and S.C. Yao
Volume 9, Number 3 (1999)
A Drop-Shattering Collision Model for Multidimensional Spray ComputationsThierry L. Georjon and Rolf D. Reitz
A Fully Compressible, Two-Dimensional Model of Small, High-Speed, Cavitating NozzlesDavid P. Schmidt, Christopher J. Rutland, and M.L. Corradini
Characterstic Study on the Like-Doubled Impinging Jets AtomizationW.H. Lai, W. Huang, and T.L. Jiang
Primary Breakup of Nonturbulent Round Liquid Jets in Gas CrossflowsJ. Mazallon, Z. Dai, G.M. Faeth
Improvement of Pattern Recognition Algorithm for Drop Size MeasurementJoo Youn Kim, Jeong Ho Cho, and Sang Yong Lee
Volume 9, Number 2 (1999)
Scaling of Spray Penetration with EvaporationYuepeng Wan and Norbert Peters
Prediction of Drop Size Distributions from First Principles: The Influence ofFluctuations in Relative Velocity and Liquid Physical PropertiesS.D. Sovani, P.E. Sojka, and Y.R. Sivathanu
Air Dilution Effects on Tetradecane Spray Autoignition in Transcritical and Supercritical RegimesM. de Joannon, A. Cavaliere, and R. Ragucci
Air-Assist Pressure-Swirl AtomizationU.T. Schmidt and P.E. Sojka
An Experiment on Flow Distribution and Mixing in Impinging Jet SpraysC.H. Lee, Y.H. Jung, and S.H. Chung
Drop Dynamics in the Port of a Spark Ignition EngineL.M. Nemecek, R.M. Wagner, and J.A. Drallmeier
Volume 9, Number 1 (1999)
Simple Description of the Combustion Structures in theStabilization Stage of a Spray Jet FlameA. Cessou, P. Goix, and D. Stepowski
A Predictive Model for Droplet Size Distribution in SpraysSushanta K. Mitra and Xianguo Li
The Effect of Manifold Cross-Flow on the DischargeCoefficient of Sharp-Edged OrificesP.A. Strakey and D.G. Talley
Evaporation of a Salt Water Drop with CrystallizationIzumi Taniguchi, Tsuguo Inoue, and Koichi Asano
Unsteadiness in Effervescent SpraysJohn T.K. Luong and Paul E. Sojka
Volume 8, Number 6 (1998)
Dispersion (Electrostatic/Mechanical) and Fuel Properties Effects onSoot Propensity in Clusters of DropsJ. Bellan and K. Harstad
On the Modeling of Liquid Sprays Impinging on SurfacesChr. Mundo, M. Sommerfeld, and C. Tropea
Spray Formation of a Hydraulic Flat Fan Nozzle with anInternally Disturbed FlowQ. Zhou, P.C.H. Miller, P.J. Walklate, and N.H. Thomas
Interacting-Sprays Injection: A New Concept for NOx and SmokeReduction in Diesel EnginesB. Chehroudi, K.M. Sinko, W.J. Minkowycz, and S. Shih
Volume 8, Number 5 (1998)
Effect of Piezoelectric Transducer Modulation on Liquid Sheet DisintegrationI-Ping Chung, Cary Presser, and John L. Dresser
Effect of Coal Particle Size on Coal-Water Slurry (CWS) AtomizationS.Y. Son and K.D. Kihm
Phase Doppler Anemometry in Inert and Liquid Gas AtomizationJ. Domnick, J. Raimann, K. Schutte, and G. Wolf
Role of Geometric Parameters on the Drop Size Characteristics ofLiquid-Liquid Coaxial Swirl AtomizersD. Sivakumar and B.N. Raghunandan
A Comparative Study of Room-Temperature and Combusting Fuel SpraysNear the Injector Tip Using Infrared Laser DiagnosticsT.E. Parker, L.R. Rainaldi, and W.T. Rawlins
Volume 8, Number 4 (1998)
Methodology for Model Discrimination and Criticism for Liquid Atomization DataDonald W. Stanton, Peter K. Senecal, Calvin C. Hung, Christopher J. Rutland, and Rolf D. Reitz
Effects of Nozzle Pressure Waveforms on Intermittant SpraysV.F. Cook and S.P. Lin
Micromachined Silicon Fuel Atomizers for Gas Turbine EnginesAngad Singh, Mehran Mehregany, Stephen M. Phillips, Rex J. Harvey, and Michael Benjamin
The Interaction of Well-Characterized, Longitudinal Acoustic Waves with a Nonreacting SprayM.Q. McQuay and R.K. Dubey
Difficulties in Measuring Liquid Droplet Size Distributions Using Laser Diffraction TechniqueSohail H. Zaidi
Diesel Spray Atomization Model Considering Nozzle Exit Turbulence ConditionsKang Y. Huh, Eunju Lee, and Ja-Ye Koo
Evaporation Rates of Agricultural Spray Material at Low Relative Wind SpeedsMilton E. Teske, Clarence G. Hermansky, and Christopher M. Riley
Volume 8, Number 3 (1998)
Temperature Effects on Atomization by Flat-Fan Nozzles: Implications for DriftManagement and Evidence for Surfactant Concentration GradientsRoger A. Downer, Franklin R. Hall, Rebecca S. Thompson, and Andrew C. Chapple
Spray Formation by Flashing of a Binary Mixture: A Parametric StudyMichal Zeigerson-Katz and Eran Sher
Empirical Calculation Model of the Atomization of a Liquid Sheet and a Round LiquidJet in a Gaseous Flow FieldNoboyuki Yatsuyanagi, Hiroshi Sakamoto, and Kazuo Sato
Fast Video Study of Surfactant Effects on Fuel Atomization in a Transparent EngineM. Golombok, V. Blanchard, P.J. Cooney, D.G. Latimer, V. Morin, and D.A.R. Jones
Linking Nozzle Flow with Spray Characteristics in a Diesel Fuel Injection SystemC. Arcoumanis and M. Gavaises
Bimodal Drop Size Distribution Behavior in Plain-Jet Airblast Atomizer SpraysRonen Harari and Eran Sher
Volume 8, Number 2 (1998)
Numerical Analysis of the Influence of the Jet Breakup Model Formulation onDiesel Engine Combustion ComputationsP. Belardini, C. Bertoli, and M.C. Cameretti
Nonlinear Simulation of a High-Speed, Viscous Liquid JetJ.H. Hilbing and S.D. Heister
Effects of Cavitation and Internal Flow on Atomization of a Liquid JetN. Tamaki, M. Shimizu, K. Nishida, and H. Hiroyasu
A Study of Two-Phase Injector Performance for Direct-Injection Stratified-Charge EnginesYong-Pyo Lee, Sung-Soo Kim, and Sangmin Choi
Ultrasonic Atomization of Liquids: Stability Analysis of the Viscous Liquid Film Free SurfaceDaniel Sindayihebura and Léon Bolle
On the Stability of Liquid Sheets in Hot AtmospheresN. Dombrowski and E.A. Fourney
Volume 8, Number 1 (1998)
The Effects of the Hartman Cavity on the Performance of the USGANozzle Used for Aluminum Spray FormingAdel Mansour, Norman Chigier, Tom I-P. Shih, and R.L Kozarek
Low-Temperature Vaporization of JP-4 and JP-8 Fuel DropletsT. Runge, M. Teske, and C.E. Polymeropoulos
Absolute and Convective Instability of Cylindrical Liquid Jets in Co-Flowing Gas StreamsXianguo Li and Jihua Shen
Numerical Study of the Effects of Gas Temperature Fluctuation on a Turbulent EvaporatingSprayX.-Q. Chen and J.C.F. Pereira
Characterization of High-Injection-Pressure Diesel Sprays with Relation toParticulate and NOx EmissionsT.F. Su and Patrick V. Farrell
Atomization Characteristics of Bitumen Crude-Water EmulsionM. Romano, C. Allouis, F. Beretta, and A. D'Alessio
Volume 7, Number 6 (1997)
The Structure of an Acoustically Forced, Droplet-Laden JetTait R. Swanson and Cill D. Richards
Application of the RNG k-e Model to the Analysis of Flows and Spray CharacteristicsH.C. Yang, H.S. Ryou, K.B. Hong, H.S. Kim, and S.K. Park
Analytical Prediction of the Exit Flow of Cavitating OrificesDavid P. Schmidt and M.L. Corradini
Possibility of Reduction of NOx Emission by Shaping the Microstructure of Atomized OilR. Wilk and A. Szlek
Fuel Delivery in a Port Fuel Injected Spark Ignition EngineR.M. Wagner, L.M. Nemecek, and J.A. Drallmeier
Microbubble Medium: Production and Hydrodynamic PropertiesIgor V. Chernyshev
Modeling Atomization Processes of Pressure-Swirl Hollow-Cone Fuel SpraysZhiyu Han, Scott Parrish, Patrick V. Farrell, and Rolf D. Reitz
Volume 7, Number 5 (1997)
Drop Size Modification in Black Liquor Sprays from Commercial Nozzles Using Pulsed FlowH. Jeff Empie, Steven J. Lien, and Wenrui Yang
Experimental Characterization of Shear Coaxial Injectors Using Liquid/Gaseous NitrogenC. Puissant, M.J. Glogowski, and M.M. Micci
Multistate Behavior of a Droplet in Dilute SpraysJiunn-Shyan Huang and Huei-Huang Chiu
Disintegration of Liquid Jets from a Coaxial Dual Nozzle, Part I: Observation of BreakupPhenomenaMasataka Arai, Kenji Amagai, and Soo-Young No
Disintegration of Liquid Jets from a Coaxial Dual Nozzle, Part II: Surface Wave and ItsFrequency AnalysisKenji Amagai, Masataka Arai, and Soo-Young No
Atomization of Thin Liquid Films by Droplet ImpactMarwan Al-Roub and Patrick V. Farrell
Prediction of Jet Breakup Length in Liquid-Liquid Systems Using the Rayleigh-TomotikaAnalysisTapas K. Das
Volume 7, Number 4 (1997)
Influence of Operating Variables on Average Droplet Size During Linear AtomizationYizhang Zhou, Steven Lee, Vincent G. McDonell, Scott Samuelson, Robert Kozarek, andEnrique J. Lavernia
Deformation and Breakup of an Annular Liquid Sheet in a Gas StreamSatoyuki Kawano, Hiroyuki Hashimoto, Hidenori Togari, Akio Ihara, Takashi Suzuki, andToshikazu Harada
The Nonaerosol Haircare Business: A Growing Need for Atomization TechnologyAndrew Gaynor
Ligament-Controlled Effervescent AtomizationJ.J. Sutherland, P.E. Sojka, and M.W. Plesniak
Droplet Formation with Single and Multiple Nodes from a Liquid Jet in Immiscible LiquidsTapas K. Das
Theoretical Investigation of the Spray from a Pressurized Metered-Dose InhalerC.A. Dunbar, A.P. Watkins, and J.F. Miller
Gasoline Injection Against Surfaces and FilmsC. Arcoumanis, D.S. Whitelaw, and J.H. Whitelaw
Volume 7, Number 3 (1997)
Droplet Size and Agricultural Spraying, Part 1: Atomization, Spray Transport, Deposition, Drift,and Droplet Size Measurement TechniquesAndrew Hewitt
Atomization Characteristics of Airblast Fuel Injection inside a Venturi TubeH. Sun, T.-H. Chue, M.-C. Lai, and R.R. Tacina
Modeling of Multiple Vaporizing Droplet Streams in Close Spacing ConfigurationsJun Xin and Constantine M. Megaridis
Characterization of a Spray from an Ultrasonically Modulated NozzleI.P. Chung, D. Dunn-Rankin, and A. Ganji
Experimental Study of Pure and Multicomponent Fuel Droplet Evaporation in a Heated Air FlowG. Chen, S.K. Aggarwal, T.A. Jackson, and G.L. Switzer
Volume 7, Number 2 (1997)
Letter from the EditorNorman Chigier
Holographic Investigation of the Effect of Elevated Ambient Temperature on the AtomizationCharacteristics ofImpinging Jet SpraysY. Shen, C. Mitts, and D. Poulikakos
Sensitivity of the Mode of Combustion of Partially Premixed Spray Flames to Flow, Transportand Evaporation EffectsJ.B. Greenberg and N. Sarig
Independent Control of Liquid Flow Rate and Spray Droplet Size from Hydraulic AtomizersD. Ken Giles
Tomographic Reconstruction of Asymmetric Sprays from a Twin-Hole Air Shroud InjectorC.H. Lee and S.H. Chung
Group Combustion Behavior of Droplets in a Premixed-Spray FlameFumiteru Akamatsu, Yukio Mizutani, Masashi Katsuki, Shohji Tsushima, Yong Dae Cho, andKazuyoshi Nakabe
A System for Determining Dynamic Surface Tension Using the Oscillating Jet TechniqueD.L. Reichard, J.A. Cooper, S.E. Bechtel, and R.D. Fox
Volume 7, Number 1 (1997)
Theory of Droplets (II): States, Structures, and Laws of Interacting DropletsH.H. Chiu and S.P. Su
Analysis of High-Pressure Diesel Spray Formation in the Early Stage of InjectionH. Takahashi, H. Yanagisawa, S. Shiga, T. Karasawa, and H. Nakamura
Methods and Tools for Advanced Fuel Spray Production and InvestigationG. Brenn, F. Durst, D. Trimis, and M. Weclas
Structure of a Nonevaporating Swirl Injector SprayD.A. Feikema, R. Eskridge, and J.J. Hutt
Optimization of a Plain-Jet Airblast AtomizerR. Harari and E. Sher
Spray Synthesis of Superplastic Materials for Near-Net-Shape ManufacturingY. Wu and E.J. Lavernia
Book ReviewNorman Chigier
Volume 6, Number 6 (1996)
The Stability Curve of Newtonian Liquid JetsS. Leroux, C. Dumouchel, and M. Ledoux
Three-Dimensional Instability of Viscous Liquid SheetsE.A. Ibrahim and E.T. Akpan
Deformation and Breakup of Drops by Aerodynamic ForcesA.A. Shraiber, A.M. Podvysotsky, and V.V. Dubrovsky
Entrained Air and Droplet Velocities Produced by Agricultural Flat-Fan NozzlesP.C.H. Miller, M.C. Butler Ellis, and C.R. Tuck
Modeling Cavitating Flows in Diesel InjectorsYongliang Chen and S.D. Heister
Volume 6, Number 5 (1996)
Single-Point Statistics of Ideal Sprays, Part I: Fundamental Descriptions and Derived QuantitiesC.F. Edwards and K.D. Marx
Pulsed-Fuel-Spray Vapor-Phase CharacterizationP.D. Jennings and J.A. Drallmeier
Effect of Viscosity on the Linear Instability of a Flat Liquid SheetJ. Cousin and C. Dumouchel
Turbulence Characteristics of a Twin-Fluid AtomizerT. Sakai, D.Q. Zhao, M. Iijima, M. Saito, and M. Sato
Coupling of Classical Linear Theory and Maximum Entropy Formalism for Prediction of DropSize Distribution in Sprays:Application to Pressure-Swirl AtomizersJ. Cousin, S.J. Yoon, and C. Dumouchel
Volume 6, Number 4 (1996)
Drop Size Measurements in Heavy Oil Sprays from Pressure-Swirl NozzlesJ.M. Ballester and C. Dopazo
Mean Behavior of a Coaxial Air-Blast Atomized Spray in a Co-Flowing Air StreamJean-Jacques Karl, Daniel Huilier, and Henri Burnage
Autoignition Characteristics of Diesel Sprays under Different Injection ConditionsR. Ragucci, A. Cavaliere, and C. Noviello
Spray Formation by Flashing of a Binary Mixture: An Energy Balance ApproachEran Sher and Michal Zeigerson-Katz
Atomization Characteristics of Pressure-Modulated Automotive Port Injector SpraysFu-Quan Zhao, Ming-Chia Lai, Amer Ahmad Amer, and John L. Dressler
Droplet Stream Dynamics at High Ambient PressureC.S. Connon and D. Dunn-Rankin
Volume 6, Number 3 (1996)
Breakup of Droplets of Newtonian and Non-Newtonian FluidsC. Arcoumanis, D.S. Whitelaw, and J.H. Whitelaw
Spray Visualization and Hydraulic Characterization of the Holes of a Five-Hole, Valve-Covered-Orifice Nozzle of anElectronically Controlled Diesel InjectorR. Campanella, V. Damiani, and D. Laforgia
Comparative Study of Twin-Fluid Atomization Using Sonic or Supersonic Gas JetsB.K. Park, J.S. Lee, and K.D. Kihm
Precision Droplet-Based Manufacturing and Material Synthesis: Fluid Dynamics and ThermalControl IssuesMelissa E. Orme, Changzheng Huang, and Jon Courter
Measurement of the Evaporation Rates of Closely Spaced Flowing Droplets by Optical CavityResonancesJ. Christian Swindal, Gang Chen, Karl Scheschak, Richard K. Chang, and Thomas Jackson
Breakup Mechanisms and Drag Coefficients of High-Speed Vaporizing Liquid DropsS.S. Hwang, Z. Liu, and R.D. Reitz
Volume 6, Number 2 (1996)
Unsteady and Quasi-Steady Vaporization of Spherical Droplet CloudsMuh Hsiung Yang and Martin Sichel
Anatomy of an Isothermal and a Burning Hollow-Cone SprayB. Chehroudi and M. Ghaffarpour
Measurement of Extensional Viscosity of Polymer Solutions and Its Effects on Atomization froma Spray NozzleR.W. Dexter
Study of Atomization Mechanism of Gas/Liquid Mixtures Flowing through Y-Jet AtomizersSi Hong Song and Sang Yong Lee
Limitations of the Stochastic Approach in Two-Phase Turbulent Flow CalculationsKeh-Chin Chang, Wen-Jing Wu, and Muh-Rong Wang
Shear Coaxial Injector Atomization Phenomena for Combusting and Non-CombustingConditionsS. Pal, M.D. Moser, H.M. Ryan, M.J. Foust, and R.J. Santoro
Volume 6, Number 1 (1996)
Multiple-State Phenomena and Hysteresis of a Combusting Isolated DropletH.H. Chiu and J.S. Huang
Droplet Transport in Simplex and Air-Assisted SpraysW.H. Lai, K.H. Yang, C.H. Hong, and M.R. Wang
Effects of Flow Nonuniformity and Relative Acceleration on Droplet DynamicsF. Peng and S.K. Aggarwal
Experimental and Numerical Study of the Atomization of a Planar Liquid SheetAntonio Lozano, Charles J. Call, César Dopazo, and Antonio García-Olivares
Spray Characteristics in a Direct-Injection Diesel EngineH.C. Yang, H.S. Ryou, Y.T. Jeong, and Y.K. Choi
Liquid Core Structure of Pressure-Atomized Sprays via Laser Tomographic ImagingT.-W. Lee and A. Mitrovic
Volume 5, Number 6 (1995)
Fractal Dimensions of Liquid Jet Interface under BreakupUri Shavit and Norman Chigier
Refractive Index Measurements Using the Phase-Doppler TechniqueG. Brenn and F. Durst
Effect of Cavitation on Flow and Turbulence in Plain Orifices for High-Speed AtomizationLu He and Francisco Ruiz
Assessment of a Fourier-Transform Doppler Signal Analyzer and Comparisons with a Time-Domain Counter ProcessorJ.Y. Zhu, E.J. Bachalo, R.C. Rudoff, W.D. Bachalo, and V.G. McDonell
Comparisons between Experiments and Predictions Based on Maximum Entropy for theBreakup of a Cylindrical Liquid JetL.P. Chin, P.C. Hsing, R.S. Tankin, and T. Jackson
A Boundary-Element Method for Atomization of a Finite Liquid JetJ.H. Hilbing, S.D. Heister, and C.A. Spangler
Volume 5, Numbers 4&5 (1995)
Asymptotic Analysis of Droplet Coalescence Effects on Spray Diffusion Flames in aUnidirectional Shear Layer FlowY. Tambour and D. Katoshevski
Holography Experiments in the Breakup Region of a Liquid Sheet Formed by Two ImpingingJetsB.S. Kang, Y.B. Shen, and D. Poulikakos
Streaked Particle Imaging Velocimetry and Sizing in a SprayD.C. Herpfer, S. Jeng, and S.M. Jeng
Atomization of Cross-Injecting Sprays into Convective Air StreamK.D. Kihm, G.M. Lyn, and S.Y. Son
Multipoint Statistical Structure of the Ideal Spray, Part I: Fundamental Concepts and theRealization DensityC.F. Edwards and K.D. Marx
Multipoint Statistical Structure of the Ideal Spray, Part II: Evaluating Steadiness Using theInterparticle Time DistributionC.F. Edwards and K.D. Marx
Transient Behavior in the Evolution of Laminar Multisize Spray Diffusion FlamesJ.B. Greenberg and I. Shpilberg
Volume 5, Number 3 (1995)
(Out of print.)
Control of Mean Droplet Diameter Issued from Y-Jet-Type Airblast Atomizer by Using FluidAmplifierTakao Inamura and Nobuki Nagai
Viscosity and Surface Tension Effects in Pressure Swirl AtomizationV. Dorfner, J. Domnick, F. Durst, and R. Köhler
Turbulent Sprays in Stagnation FlowsS.C. Li, P.A. Libby, and F.A. Williams
Measurements of U'gi U'gi in Mixing-Layer Flow with Droplet LoadingM.R. Wang and D.Y. Huang
Effects of Drop Loading on Turbulent Diffusivity in a Two-Phase Mixing-Layer FlowM.R. Wang and D.Y. Huang
Fluid Velocity and Shear in Elliptic-Orifice Spray NozzlesH. Zhu, R.D. Brazee, D.L Reichard, R.D. Fox, C.R. Krause, and A.C. Chapple
Volume 5, Number 2 (1995)
Ducted Air Flow Induced by Multiple Spray NozzlesN. Dombrowski and J. Singh
A Holographic Investigation of the Near-Nozzle Structure of an Effervescent Atomizer-ProducedSprayPhilip J. Santangelo and Paul E. Sojka
The Breakup Zone of a Diesel Spray: Part 1, Length of Zone and Volume of Unatomized LiquidA.J. Yule and D.G. Salters
Effects of Initial Flow Conditions on Primary Breakup of Nonturbulent and Turbulent RoundLiquid JetsP.-K. Wu, R.F. Miranda, and G.M. Faeth
Multidimensional, Nonhomogeneous, Dense Spray Contributions to Diffraction-BasedParticle Size Distribution MeasurementsChristine M. Woodall, James E. Peters, and Richard O. Buckius
Modeling Heat Transfer to Impinging Fuel Sprays in Direct-Injection EnginesJoel E. Eckhause and Rolf D. Reitz
Volume 5, Number 1 (1995)
(Out of print.)
Steady Injection of Identical Clusters of Evaporating Drops Embedded in Jet VorticesJ. Bellan and K. Harstad
Unsteady Injection of Sequences of Drop Clusters in Vortices Depicting Portions of a SprayJ. Bellan and K. Harstad
Spray Sizing by Tomographic ImagingC. Oberlé and N. Ashgriz
Dense Spray Corrections for Diffraction-Based Particle Size Distribution MeasurementsChristine M. Woodall, James E. Peters, and Richard O. Buckius
Mechanism of Atomization of a Liquid JetXianguo Li
Near-Nozzle Characteristics of a Transient Fuel SprayJa Ye Koo and Jay K. Martin
Volume 4, Number 6 (1994)
On the Energy Partition of Liquid Drops in Spraying and AtomizationY. Zimmels
Atomization of Detergent SlurriesC.A. Sudlow and C.J. Mumford
Combustion of a Polydisperse Nonuniform Cloud of Fuel Droplets in a Confined Flow SystemY. Tambour, J.B. Greenberg, and D. Elkaim
Vaporization of Miscible Binary Fuel Droplets under Laminar and Turbulent ConvectiveConditionsI. Gökalp, C. Chauveau, H. Berrekam, and N.A. Ramos-Arroyo
Radial Distribution of Drop Size in Steady Full-Cone SpraysJ.M. MacInnes and F.V. Bracco
Volume 4, Number 5 (1994)
Observation of Droplet Group Combustion in Terms of Simultaneous Measurement of MieScattering andSpectral Luminosity from Spray FlamesKazuyoshi Nakabe, Yukio Mizutani, Fumiteru Akamatsu, and Hiroyuki Fujioka
Spray Characteristics of an Air-Assisted Fuel Injector for Two-Stroke Direct-Injection GasolineEnginesKi Seong Kim and Sung Soo Kim
Droplet Vaporization in Expansible Dense Sprays at Sub- and Supercritical ConditionsTsung Leo Jiang and Wei-Tang Chiang
Disintegration of Liquid Jets from Sharp-Edged NozzlesK. Ramamurthi and K. Nandakumar
Effects of Initial Multisize Droplet Distributions on Polydisperse Spray Jet Far-Field DiffusionFlamesY. Tambour, I. Silverman, and J.B. Greenberg
Effect of Turbulence on the Stability of Liquid Jets and the Resulting Droplet Size DistributionsAdel Mansour and Norman Chigier
Volume 4, Number 4 (1994)
Numerical Investigation of Micropore Formation during Substrate Impact of MoltenDroplets in Plasma Spray ProcessesHuimin Liu, Enrique J. Lavernia, and Roger H. Rangel
Numerical Simulation of Actual Delivered Density of Sprinkler Spray through Fire PlumesSoonil Nam
The Cause and Effects of Perforations in a Liquid Sheet from a Splash-Plate Spray NozzleThomas M. Spielbauer and Cyrus K. Aidun
Application of Phase Doppler Anemometry in Paint SpraysJ. Domnick, A. Lindenthal, C. Tropea, and T.-H. Xu
Atomization Characteristics of Liquid Jets Injected into a High-Velocity Flow FieldNobuyuki Yatsuyanagi, Horishi Sakamoto, and Kazuo Sato
Drop Size Scaling Analysis of Non-Newtonian FluidsMilton E. Teske and Alan J. Bilanin
Volume 4, Number 3 (1994)
Atomization Behavior of Fuel Containing Dissolved GasHuang Zhen, Shao Yiming, Seiichi Shiga, Hisao Nakamura, Takao Karasawa, and TamotsuNagasaka
Sprays from Nozzles and Rotary AtomizersAnders Hallström and Jeffrey B. Danner
Discharge Coefficients for Plain-Orifice Effervescent AtomizersS. Kevin Chen and Arthur H. Lefebvre
Spray Cone Angles of Effervescent AtomizersS. Kevin Chen and Arthur H. Lefebvre
Two-Phase Flow Calculation of Reacting and Nonreacting, Nonswirling, Air-Assisted MethanolSpraysAnil K. Tolpadi
Boundary-Layer Stripping Effects on Droplet Transcritical Convective VaporizationJean-Pierre Delplanque and William A. Sirignano
Discharge Coefficient and Spray Angle Measurements for Small Pressure-Swirl NozzlesJavier Ballester and César Dopazo
Volume 4, Number 2 (1994)
The Orifice Flow Pattern, Pressure Characteristics, and Their Effects on the Atomization of FuelContaining Dissolved GasHuang Zhen, Shao Yiming, Seiichi Shiga, Hisao Nakamura, and Takao Karasawa
Liquid- and Vapor-Phase Dynamics of a Solid-Cone Pressure Swirl AtomizerJ.A. Drallmeier and J.E. Peters
An Experimental Investigation of the Flash Atomization MechanismByung Suh Park and Sang Yong Lee
Vaporization of a Polydisperse Spray in an Isothermal Invompressible Flow Field in theVicinity of a Rotating Infinite Disk: Similarity SolutionsQing-Hong Zhu and Yoram Tambour
Effect of Dodecanol Content on the Combustion of Methanol Spray FlamesC. Presser, A.K. Gupta, C.T. Avedisian, and H.G. Semerjian
Effect of Stokes Number on Particle DispersionS.K. Aggarwal, Y. Xiao, and J. Uthuppan
Spray Characteristics of a Pintle-Type Injector in a Low-Pressure Gas EnvironmentJiro Senda, Masashi Yamaguchi, Tokihiro Tsukamoto, and Hajime Fujimoto
Volume 4, Number 1 (1994)
Limitations of the Ideal Phase-Doppler System: Extension to Sptially and TemporallyInhomogeneous Particle FlowsK.D. Marx, C.F. Edwards, and W.K. Chin
A Conductivity Probe Technique for Investigating the Breakup of Diesel SpraysA.J. Yule and D.G. Salters
Drop Sizing and Depth-of-Field Correction in TV ImagingKi Seong Kim and Sung Soo Kim
Analysis of Evaporation and Combustion of Random Clusters of Droplets by a ModifiedMethod of Expansion into Irreducible MultipolesT. Elperin and B. Krasovitov
A Detailed Assesment of the Infrared Extinction Technique for Hydrocarbon VaporMeasurements in a Controlled Two-Phase FlowT.P. Billings and J.A. Drallmeier
Volume 3, Number 4 (1993)
An Assessment of Spray Technology - EditorialNorman Chigier
Spray Characterization of Liquid/Gas Coaxial Injectors with the Center Liquid SwirledDonald J. Hautman
Structure of Reating and Nonreacting, Nonswirling, Air-Assisted Sprays, Part I: Gas-PhasePropertiesV.G. McDonnell, M. Adachi, and G.S. Samuelsen
Structure of Reating and Nonreacting, Nonswirling, Air-Assisted Sprays, Part II: Drop BehaviorV.G. McDonnell, M. Adachi, and G.S. Samuelsen
Lewis Number and Vaporization Effects in Spray Diffusion FlamesJ.B. Greenberg and I. Shpilberg
Flow Patterns in Internal-Mixing, Twin-Fluid AtomizersJ.S. Chin and A.H. Lefebvre
A Description of the Droplet Spectra Produced by a Flat-Fan NozzleAndrew C. Chapple and Franklin R. Hall
Volume 3, Number 3 (1993)
The Effect of Vaporization and Gas Compressibility on Liquid Jet AtomizationZ.W. Lian and R.D. Reitz
Aerodynamic Effects on Primary Breakup of Turbulent LiquidsP.-K. Wu and G.M. Faeth
A Simplified Maximum-Entropy-Based Drop Size DistributionM. Ahmadi and R.W. Sellens
Multiple Scattering and Size Distribution Effects on the Performance of a Laser DiffractionParticle SizerT. Paloposki and A. Kankkunen
Structure of Vaporizing Pressure Atomized SpraysV.G. McDonell and G.S. Samuelsen
Volume 3, Number 2 (1993)
(Out of print.)
Spark-Ignited Spherical Flames Propagating in a Suspended Droplet CloudYukio Mizutani, Kazuyoshi Nakabe, Manabu Fuchihata, Fumiteru Akamatsu,Masataka Zaizen, and Salah Hassan El-Emam
Effervescent Atomizer Operation and Spray CharacteristicsJ.D. Whitlow and A.H. Lefebvre
Effervescent Atomization of High-Viscosity Fluids: Part II. Non-Newtonian FluidsHarry N. Buckner and Paul E. Sojka
Presolidification Liquid Metal Droplet Cooling under Convective ConditionsConstantine M. Megaridis
Holographic Investigation of Microexplosion in an Emulsified Diesel Oil SprayH. Xu, C.G. Zhu, Y.B. Shen, and D. Poulikakos
Spray Group Combustion in a Cylindrical Nonpremixed CombustorTsung Leo Jiang and Huei-Huang Chiu
New Closed-Form Analytical Solutions of the Discrete Coagulation Equation with SimultaneousEvaporation and Their Use for Validation of Sectional SolutionsS. Khosid and Y. Tambour
Volume 3, Number 1 (1993)
Mathematical Modeling of Densely Loaded, Particle-Laden Turbulent FlowsMostafa A. Rizk
The Large-Scale Fragmentation of the Intact Liquid Core of a Spray JetM.J. Andrews
Mechanisms of Air-Assisted Liquid AtomizationA.B. Liu and R.D. Reitz
Effervescent Atomization at Low Mass Flow Rates. Part I: The Influence of Surface TensionM.T. Lund, P.E. Sojka, and A.H. Lefebvre
Axisymmetric Calculations of Three-Droplet InteractionsC.H. Chiang and W.A. Sirignano
The Three-Parameter Log-Hyperbolic Distribution and its Application to Particle SizingT.-H. Xu, F. Durst, and C. Tropea
Volume 2, Number 4 (1992)
Phase-Shift Doppler Anemometer Measurements of Diesel Spray Behavior in Open CombustionChambersM.M. ElKotb, O.M.F. Elbahar, T.I. Sabry, and S.A. Wilson
Accounting for Depth of Field in Sizing Spherical Particles by ImagingD.G. Talley and M. Hassani
Effect of Nozzle Configuration on the Atomization of a Steady SprayTakao Karasawa, Masaki Tanaka, Kazuhiro Abe, Seiichi Shiga, and Toshio Kurabayashi
Numerical Prediction of Nonevaporating and Evaporating Fuel Sprays under NonreactiveConditionsX.Q. Chen and J.C.F. Pereira
Measurements and Predictions of a Liquid Spray from an Air-Assist NozzleDaniel L. Bulzan, Yeshayahou Levy, Suresh K. Aggarwal, and Susheel Chitre
Atomization, Charge, and Deposition Characteristics of Bipolarly Charged Aircraft SpraysK.D. Kihm, B.H. Kim, and A.R. McFarland
Volume 2, Number 3 (1992)
Solutions of Polydisperse Spray Sectional Equations via a Multiple-Scale Approach:An Analysis of a Premixed Polydisperse Spray FlameI. Silverman, J.B. Greenberg, and Y. Tambour
Boundary-Layer Characteristics of a Swirl AtomizerC. Dumouchel, M.I.G. Bloor, N. Dombrowski, D.B. Ingham, and M. Ledoux
A One-Dimensional Numerical Model of Capillary InstabilityR.W. Sellens
Atomization of Alloy PowdersE.J. Lavernia, T.S. Srivatsan, and R.H. Rangel
Spatial Distortion of Spray Diffusion FlamesJ.B. Greenberg and R. Cohen
Primary Breakup in Gas/Liquid Mixing Layers for Turbulent LiquidsP.-K. Wu, L.-K. Tseng, and G.M. Faeth
Analysis of the Ideal Phase-Doppler System: Limitations Imposed by the Single-ParticleConstraintC.F. Edwards and K.D. Marx
Volume 2, Number 2 (1992)
Correcting Malvern Particle Size Measurements for Phase DistortionR.W. Pietsch, P.E. Sojka, and G.B. King
Atomization Characteristics of a High-Speed Rotary-Bell Paint ApplicatorP.L. Corbeels, D.W. Senser, and A.H. Lefebvre
Twin-Fluid Atomization: Factors Influencing Mean Drop SizeArthur H. Lefebvre
Wave Characteristics of Liquid Sheets with Impinging Air JetsHasan Eroglu and Norman Chigier
Morphological Classification of Disintegration of Round Liquid Jets in a Coaxial Air StreamZoltan Farago and Norman Chigier
Drop Distribution Effects on Planar Laser Imaging of SpraysH.M. Ryan, S. Pal, W. Lee, and R.J. Santoro
Number Distribution Function of Drop Size and Velocity in Water SpraysAkira Moriyama and Tatsuya Yamada
Volume 2, Number 1 (1992)
Interpreting Mean Drop Diameters Using Distribution MomentsW.A. Sowa
Flat-Sheet Twin-Fluid Atomization of High-Viscosity Fluids. Part I: Newtonian LiquidsKeith E. Knoll and Paul E. Sojka
Formation of Monosized Droplets by a Vibrating Liquid-Liquid JetT.K. Das
Design and Characteristics of Twin-Fluid Y-Jet AtomizersP. Andreussi, L. Tognotti, G. De Michele, and M. Graziadio
Atomization of Highly Viscous Liquids by a Spinning DiskYoshiro Kitamura and Teruo Takahashi
Volume 1, Number 4 (1991)
Wave Characteristics of Liquid Jets from Airblast Coaxial AtomizersH. Eroglu and N. Chigier
A Model of the Evaporation of Binary-Fuel Clusters of DropsK. Harstad and J. Bellan
Gray Level Factors Used in Image Processing of Two-Dimensional Drop ImagesSang Yong Lee, Byung Suh Park, and In Goo Kim
Atomization and Evaporation of Diesel Sprays in High-Pressure and High-TemperatureEnvironmentsA. Cavaliere, R. Ragucci, A. D'Alessio, and C. Noviello
Primary Breakup in Liquid-Gas Mixing LayersP.-K. Wu, G.A. Ruff, and G.M. Faeth
Measurement and Modeling of Diesel SpraysA.J. Yule and A.P. Watkins
Volume 1, Number 3 (1991)
Effervescent Atomization of High-Viscosity Fluids: Part I. Newtonian LiquidsHarry N. Buckner and Paul E. Sojka
Geometric Effects on Spray Cone Angle for Plain Orifice AtomizersT.R. Ohrn, D.W. Senser, and A.H. Lefebvre
Operation, Calibration, and Accuracy of the Forward Scattering Spectrometer Probe in an IcingEnvironmentEdward A. Hovenac
Impinging Diesel Spray DynamicsJ.R. Zurlo and N. Chigier
Spray Behavior in Nonswirling and Swirling Annular Air FlowsXianguo Li and Richard S. Tankin
Analysis of Pre-Ignition Mechanisms in a Diesel Combustion Engine with the Aid of ImageProcessingA. Cavaliere, S. Pintus, L. Tognotti, and S. Zanelli
Volume 1, Number 2 (1991)
Geometrical Effects on Discharge Coefficients for Plain-Orifice AtomizersT.R. Ohrn, D.W. Senser, and A.H. Lefebvre
Liquid Sheet Disintegration by Impinging Air StreamsJ.E. Beck, A.H. Lefebvre, and T.R. Koblish
Production of Uniformly Sized Dual Concentric Droplets from Coaxial Smooth Jet under AppliedAC Electric FieldTakashi Sakai, Masayoshi Sadakata, Masayuki Sato, Kiyoshi Kimura
Mechanism of Spray Formation from Liquid SheetsB. Creighton and S.P. Lin
Application of Image Processing in Spray Diagnostics: High-Velocity JetsL. Azzarelli, M. Chimenti, O. Salvetti, and L. Tognotti
Analysis of Pressure Swirl and Pure Airblast AtomizationChien-Pei Mao, S.G. Chuech, and A.J. Przekwas
Book Review: Atomization and Sprays, by Arthur H. Lefebvre
Volume 1, Number 1 (1991)
Editorial
Influence of Liquid Viscosity on Pressure-swirl Atomizer PerformanceS.K. Chen, A.H. Lefebvre, and J. Rollbuhler
Parametric Experiments on Liquid Jet Atomization Spray AngleFrancisco Ruiz and Norman Chigier
Interaction between Two Thin Liquid Jets with Disintegration by Gas FlowH. Hashimoto, T. Suzuki, and T. Matsuya
Experimental Investigation of Fuel Spray Vapor Phase CharacterizationJ.A. Drallmeier and J.E. Peters
2-D Laser Sheet Visualization of a Pulsed Hollow Cone Spray: Stagnant and Simulated Two-stroke Engine EnvironmentsD.G. Talley, Y.C. Lin, and M. Morris
Effect of Shock Waves on Liquid Atomization of a Two-dimensional Airblast AtomizerK.D. Kihm and N. Chigier
top related