autocad 2010 gamtek 1
Post on 18-Feb-2016
249 Views
Preview:
TRANSCRIPT
Opening an AutoCAD 2010 format file.
Regenerating model.
AutoCAD menu utilities loaded.
Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application
or Autodesk licensed application.
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Enter name list of layer(s) for color 32 <PINTU>: PINTU
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: *Cancel*
Command: Specify opposite corner:
Command: _chprop
2 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <varies>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: Zero length line created at (114184.0284,
53286.5240, 0.0000)
Specify next point or [Close/Undo]: *Cancel*
Command:
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: Zero length line created at (114334.0284,
53286.5240, 0.0000)
Specify next point or [Close/Undo]: *Cancel*
Command: Specify opposite corner:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner: *Cancel*
Command:
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: Zero length line created at (114184.0261,
51343.6289, 0.0000)
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: Zero length line created at (114334.0261,
51343.6286, 0.0000)
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: Specify opposite corner:
Command: *Cancel*
Command: Specify opposite corner:
Command: '_.-LAYER
Current layer: "PINTU"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _COLOR
New color [Truecolor/COlorbook] : 32
Enter name list of layer(s) for color 32 <PINTU>: PINTU
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: _chprop
8 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: Specify opposite corner:
Command: _chprop
9 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <varies>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: Specify opposite corner:
Command: _chprop
14 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <varies>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command: Specify opposite corner:
Command: *Cancel*
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command: _chprop
1 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command: Specify opposite corner:
Command: _chprop
1 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: _chprop
1 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command:
Command: _chprop
1 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: _u
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: *Cancel*
Command: Specify opposite corner: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: '_.-LAYER
Current layer: "PINTU"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _COLOR
New color [Truecolor/COlorbook] : 32
Enter name list of layer(s) for color 32 <PINTU>: PINTU
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: *Cancel*
Command: Specify opposite corner:
Command: _chprop
18 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command: LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _pasteclip Specify insertion point: *Cancel*
Command: *Cancel*
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: _u
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: _u LINE GROUP
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: Zero length line created at (113749.5458,
58033.5232, 0.0000)
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _u LINE
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 420
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u DIMLINEAR
Command: dimlinerar
Unknown command "DIMLINERAR". Press F1 for help.
Command: dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 420
Command:
Command: *Cancel*
Command:
Command:
Pick a point in the drawing: <Ortho off>
Command: _u INTELLIZOOM
Command: _u PPGETACADINPUT
Command: Specify opposite corner:
Command: <Osnap off>
Command:
Pick a point in the drawing:
Command:
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Pick a point in the drawing:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: *Cancel*
Command: dimlinear
Specify first extension line origin or <select object>: <Osnap on>
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 1337.72
Command:
Command:
Command: '_.properties
Command:
Command: *Cancel*
Command:
Command:
Pick a point in the drawing:
Command: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <420.0000>: 1400
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Command: Specify opposite corner:
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command: *Cancel*
Command: 0ffset
Unknown command "0FFSET". Press F1 for help.
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <1400.0000>: 260
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command: _cutclip 1 found
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command: Specify opposite corner:
Command: _.erase 1 found
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Automatic save to C:\Users\YUDI\appdata\local\temp\YESSS_1_1_8467.sv$ ...
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: Specify opposite corner:
Command: <Osnap off>
Command: <Ortho on>
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: <Osnap on>
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: <Osnap off>
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: <Osnap on>
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 1400
Command: Specify opposite corner:
Command: *Cancel*
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 7 found
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command:
Command:
Command: _qsave
Command:
Command: Specify opposite corner:
Command: _.erase 6 found
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command: _u ERASE
Command: Specify opposite corner:
Command: _.erase 5 found
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <260.0000>: 8740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command:
Command: _qsave
Command:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _chprop
15 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <0>: PINTU
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command:
Command:
Command:
Command: _copyclip 1 found
Command: Specify opposite corner: *Cancel*
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _qsave
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
*Cancel*
Specify insertion point:
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: *Cancel*
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Command: Specify opposite corner:
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: *Cancel*
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <20.0000>: Specify second
point: 110
Requires numeric distance, two points, or option keyword.
Specify second point: *Cancel*
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <20.0000>: 110
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner: *Cancel*
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command: _.erase 1 found
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: _u INTELLIZOOM
Command: _u QSAVE GROUP Regenerating model.
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _u
Command: _u INTELLIZOOM
Command: _u Grip Edit
Command:
Command: Specify opposite corner: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: Specify opposite corner:
Command: _chprop
2 found
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: _layer
Enter new layer name <PINTU>: 0
Enter property to change
[Color/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:
Command: *Cancel*
Command:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Hatch boundary associativity removed.
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Hatch boundary associativity removed.
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command:
Command: _properties
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command:
Command: BHATCH
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]:
Command: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner: *Cancel*
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Command: *Cancel*
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: Specify opposite corner:
Invalid window specification.
Specify opposite corner: Specify opposite corner: *Cancel*
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Layout1>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Model>
Restoring cached viewports.
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: _.erase 907 found
4 were on a locked layer.
Command: Specify opposite corner:
Command: _.erase 385 found
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Command: Specify opposite corner:
Command: _.erase 39 found
Command: Specify opposite corner:
Command: _.erase 10 found
Command: Specify opposite corner:
Command: _.erase 71 found
Command: Specify opposite corner:
Command: _.erase 76 found
Command: Specify opposite corner:
Command: _.erase 1 found
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <20.0000>: 4740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4740.0000>: Specify second
point: 0
Requires numeric distance, two points, or option keyword.
Specify second point: *Cancel*
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4740.0000>: 6740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 6 found
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Dimension disassociated.
Hatch boundary associativity removed.
Hatch boundary associativity removed.
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <6740.0000>: 4740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Hatch boundary associativity removed.
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4740.0000>: 3340
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Dimension disassociated.
Command: Specify opposite corner:
Command: _.erase 212 found
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _mtext Current text style: "Standard" Text height: 2.5 Annotative:
No
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Command: Specify opposite corner:
Command: *Cancel*
Command: Specify opposite corner:
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command:
Command: *Cancel*
Command:
Command:
Command: _mtext Current text style: "Standard" Text height: 2.5 Annotative:
No
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _ai_selall Selecting objects...done.
Command: regen
Regenerating model.
Command: Specify opposite corner:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 850
Command:
Command: _.erase 1 found
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 2313.53
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Pick a point in the drawing:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Pick a point in the drawing:
Command: <Ortho off>
Command:
Pick a point in the drawing:
Command: *Cancel*
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _mtedit
Command: _u MTEDIT GROUP
Command: _u Grip Edit
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command: *Cancel*
Command: Specify opposite corner: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: _u INTELLIZOOM
Command: Specify opposite corner:
Command:
Command: *Cancel*
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: _.erase 1 found
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: K
Unknown command "K". Press F1 for help.
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command: Specify opposite corner:
Command: _.erase 2 found
Command: _u ERASE
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 1 found
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 3 found
Hatch boundary associativity removed.
Command: _u ERASE
Command:
Command: *Cancel*
Command:
Command:
Command: _.erase 1 found
Command:
Command: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 2 found
Hatch boundary associativity removed.
Command:
Command: _.erase 1 found
Command: Specify opposite corner:
Command: _.erase 1 found
Command:
Automatic save to C:\Users\YUDI\appdata\local\temp\YESSS_1_1_1923.sv$ ...
Command:
Command: Specify opposite corner:
Command: _.erase 2 found
Command: *Cancel*
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <3340.0000>: 4740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4740.0000>: 6740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <6740.0000>: 4740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4740.0000>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command: _.erase 1 found
Command: *Cancel*
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <4740.0000>: 3340
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Hatch boundary associativity removed.
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _u INTELLIZOOM
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: <Ortho on>
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: _.erase 1 found
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <3340.0000>: 20
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Command: Specify opposite corner: *Cancel*
Command:
Command:
Command: _qsave
Command: XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]:
Specify through point:
Specify through point:
Specify through point: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _u
Command: _u
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u DROPGEOM GROUP
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Select objects: 1 found (1 duplicate), 2 total
Select objects: 1 found (1 duplicate), 2 total
Select objects: 1 found (1 duplicate), 2 total
Select objects: 1 found (1 duplicate), 2 total
Select objects: *Cancel*
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=Extend
Select cutting edges ...
Select objects or <select all>: 1 found
Select objects: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=Extend
Select cutting edges ... 1 found
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=Extend
Select cutting edges ... 1 found
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Layout1>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Model>
Restoring cached viewports.
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Layout1>
Restoring cached viewports - Regenerating layout.
Command: _.MSPACE
Command: Specify opposite corner:
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Model>
Restoring cached viewports.
Command: Specify opposite corner:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: _.erase 1 found
Command: *Cancel*
Command: OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <3340.0000>: 8740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Layout1>
Restoring cached viewports - Regenerating layout.
Regenerating 19 modified entities.
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: Specify opposite corner: *Cancel*
Command: *Cancel*
Command: _.PSPACE
Command: Specify opposite corner:
Command: _.erase 2 found
2 were on a locked layer.
Select objects: *Cancel*
Command: Specify opposite corner:
Command: _.erase 2 found
2 were on a locked layer.
Select objects: *Cancel*
Command: Specify opposite corner:
Command:
Command:
Command: Specify opposite corner:
Command:
Command: _.vpmax Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: _u INTELLIZOOM
Command: _u VPMAX Regenerating layout.
Regenerating model - caching viewports.
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: 0
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: BATH TUBE
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: JENDELA
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: kayu jendela
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: PINTU
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: SHOWER
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: TOILET
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: WARDROBE
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Current layer: "Defpoints"
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]: _UNLOCK
Enter name list of layer(s) to unlock or <select objects>: WASTAFEL
Enter an option
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/LOck
/Unlock/stAte/Description/rEconcile]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command: _.erase 1 found
Command: Specify opposite corner:
Command: *Cancel*
Command: L
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: CP
COPY 1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Specify second point
or <use first point as displacement>: 100
Invalid point.
Specify second point or <use first point as displacement>: 100
Specify second point or [Exit/Undo] <Exit>:
Command: VPORTS
Specify first corner or [Fit] <Fit>:
Specify opposite corner: Regenerating layout.
Regenerating model.
Command: *Cancel*
Command: Specify opposite corner:
Command: _.erase 2 found
Command:
Command: CP
COPY 1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>: Specify second point
or <use first point as displacement>: 100
Specify second point or [Exit/Undo] <Exit>:
Command: VPORTS
Specify first corner or [Fit] <Fit>:
Specify opposite corner: Regenerating layout.
Regenerating model.
Command: _.MSPACE
Command: _.PSPACE
Command: _.MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE, or . for none <"1:100">: 1:100
Command: _SCALELISTEDIT
Command: _CANNOSCALE
Enter new value for CANNOSCALE, or . for none <"1:100">: 1:150
Command:
Command:
Command: _qsave
Command: _CANNOSCALE
Enter new value for CANNOSCALE, or . for none <"1:150">: 1:150
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
top related