automation and drives breathtakingly powerful
Post on 09-Apr-2022
4 Views
Preview:
TRANSCRIPT
GG-Kennungoder Produktname
Automation and Drives
Breathtakingly powerful –Drive solutions in their element
ow-voltage motors
L
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 2e
Low-voltage motors
Power range: 60 W to 1000 kW
Voltage: Up to 1000 V
Frame sizes: 56M ... 450
Concentrated power without limitsMotors which will certainly move you
Energy-saving motorsfor the European and US markets,in compliance with EPACT(US legislation, October 97)
Standard motors with NEMAdimensions Rugged gray cast iron frames
Explosion-protected motors“increased safety” and “flameproof enclosure”
Single-phase motorsfor industrial applications
Customer-specific motors
Certified smoke extraction motors
Type-approved motors for marine applicationsfor operation below deck
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 3e
Low-voltage motors
Energy-saving motorsMove for your benefit
IEC energy-saving motorsFor Europe with EU efficiencyClasses EFF1 and EFF2For North America in compliancewith EPACT certification CC032Aand optionally CSA-E
Advantages of EFF1 /EPACT motors at a glance:
Noticeably lower operating costsOne motor for Europe and the USLonger motor lifetime and greaselifetime as a result of lower motortemperaturesHigh overload reserve SF 1.15in continuous operationWide variety of optionsInverter-proof up to 500V - alternatively 690V
Power range: 60 W to 1000 kW
Voltage: Up to 1000 V
Frame sizes: 56M ... 450
Energy costs represent 97% of the costs of a motor - only 3% for the actual motor and installation
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 4e
Low-voltage motors
Explosion-protected motorsFull-line supplier for the most frequently encountered hazardous areas
Increased safety – Zone 1II 2G EEx e IITemperature Classes: T1-T3
Frame:Aluminum or gray cast iron
Flameproof enclosure – Zone 1 II 2G EEx de IIC
Temperature Classes: T1-T4Inverter-proof up to 500V - 690Von request
All versions are certified for:
50Hz and 60Hz for all of the usual voltages
Power range: EEx e: 0.12 to 165 kWEEx de: 0.25 to 900 kW
Frame sizes: EEx e: 63M to 315LEEx de: 71M - 450
ATEX
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 5e
Low-voltage motors
Explosion-protected motors Maximum safety with the highest efficiency
Non-Sparking – Zone 2II 3G EEx nA II T3 (EN 50021)and Ex nA II T3 (IEC 60079-15)
Dust-explosion proofZone 21: II 2D IP65 T125°CZone 22: II 3D IP55 T125°C
Certified for:50Hz and 60Hz for allof the usual voltages
As energy-saving motorsEFF1 / EPACT and EFF2Aluminum or cast iron frame
ATEX
Power range: (E)Ex n: 120 W to 1000 kWDust Ex: 60 W to 200 kW
Frame sizes: (E)Ex n: 63M ... 450Dust Ex: 56 M to 315L
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 6e
Low-voltage motors
Motors according to the NEMA StandardPowerful, rugged, reliable
Range of typesGeneral Purpose, Severe Duty,Explosion-Proof motorsRugged versions for use in industry,the trades and domestic applications
Efficiency versionsEPAct EfficiencyIEEE 841 EfficiencyNEMA Premium Efficiency
Degree of protection/coolingTEFCOpen Drip Proof (ODP)
Explosion-proof versionsMulti-label (Class 1 Group D,Class 2 Group F&GSingle-label (Class 1 Group C&D)
Low-voltage industrial motors acc. to the NEMA Standardfor NAFTA
Frame sizes: NEMA 56 ... 449Power range: 0.25 ... 500 hp
3-phase and single phase
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 7e
Low-voltage motors
Modular mounting conceptThe modular system for all requirements
Module 1: Rotary pulse encoderVariable-speed drives can be simplyimplemented - also as retrofitIn either an HTL or TTL version
Module 2: Forced ventilationConstant cooling performanceAbsolutely necessary at low speedsHigh degree of utilizationfor drive inverter operation
Module 3: Mechanical brakeSpring-operated brake, mountedin the factoryOptional mechanical manual releaseand/or non-standard brake voltagesBraking torque: 5-1600 Nm
Rotary pulse encoderand forced ventilationMotor frame sizes: 100L to 315L
Mechanical brakeMotor frame sizes: 63M to 315L
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 8e
Low-voltage motors
Motors for specific industry sectorsThe optimum motor for every application
Roller-table motors:Used in reversing rolling millsTransversely ribbed frame out ofspheroid cast ironInverter-proof up to 500V –optionally up to 690V
Smoke-extraction motors:According to EN12101-3/June 2002certified motors for fire ClassesF200/F300 and F400Motor series universally acceptedfor all axial and radial fansAssignment of standard powersis unchanged!
Roller-table motorsPower range: 4 kW to 66 kWFrame sizes: 132M to 400
Smoke-extraction motorsPower range: 0.55 kW to 200 kWFrame sizes: 80M to 315L
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 9e
Low-voltage motors
Motors for specific industry sectorsThe optimum motor for every requirement
Marine motors for operationbelow deck
Type-approved in compliance withleading international ClassificationSocieties
Bureau Veritas (BV)Germanischer Lloyd (GL)Lloyds Register of Shipping (LR)Det Norske Veritas (DNV)
Energy-saving motors and explosion-protected motors, Classesof protection EExe II T1-T3and EExdeIIC T1-T4are type-approved
The motors can be equipped with allof the options to implement individualdrive tasks
Frame sizes: 56M to 315LPower range: 0.06 kW to 200 kW
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 10e
Low-voltage motors
Customer-specific motorsSpecial solutions
Examples of motor versions which havealready been implemented:
High-speed motors for textile machinesand compressors
Motors with increased power density
Liquid-cooled motors
Synchronous generators for line supply back-up
Motors for woodworking machines
Build-in motors for refrigeration compressors
Pump motors - e.g. with special shafts
Single-phase motors for industrial applications
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 11e
Low-voltage motors
ToolsEnergy-saving program (CD-ROM)
Additional Internet version:www.siemens.de/energiesparprogrammwww.siemens.com/energysavingprogram
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 12e
Low-voltage motors
ToolsSD Configurator
Simplified selection and Technical Reference Manual (program help)
Automation and Drives
A&D SDStandard Drives
Standard Drives – Driving to the future A&D SD, 13e
Low-voltage motors
ToolsSD Configurator
Extensive documentation
Operating Instructions, certificates... Dimension drawing generator (DXF / BMP)for motors
Starting calculation Data sheet generator for motors
top related