avsu module - ptl – medical gas system · avsu modules are wall mounted units that ......

Post on 09-Sep-2018

225 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

AVSU

MODULE

All rights reserved PTL Technology Sdn. Bhd. 2003

Address : 19, Jalan TS 6/4,Taman Industri Subang, 47510 Subang Jaya, Selangor, Malaysia

Telephone : 00603-56318826 Fax : 00603-56318831 E-mail : ptl88@tm.net.my

�������������������������������������������������������� ��������������������������������������������

� � �

Description

Service Module

AVSU Modules are wall mounted units that

may include a maximum of five area valve

service units , pressure sensors and an area

alarm panel.

It offers the hospital planning staff

opportunity to specify at time of order

the type, quantity and placement of

AVSU’s to suit individual requirements.

The complete assembly is housed in a

patented mounting system to minimize

installation time and provides project

cost savings.

AVSU’s are available for oxygen, nitrous

oxide, entonox, medical air, surgical air

and medical vacuum.

The emergency release mechanism on

each AVSU is easily operated with no

risk of injury to personnel.

Gas specific NIST connectors are

incorporated into each AVSU for the

connection of an emergency supply or for

purging, testing and gas sampling.

Alarm System

Line pressure sensors are connected to the downstream side of the AVSU’s and wired to an

integral area alarm panel to provide local monitoring of the pipeline pressures.

AVSU Modules are supplied with pre-piped & pre-wired.

All rights reserved PTL Technology Sdn. Bhd. 2003

Address : 19, Jalan TS 6/4,Taman Industri Subang, 47510 Subang Jaya, Selangor, Malaysia

Telephone : 00603-56318826 Fax : 00603-56318831 E-mail : ptl88@tm.net.my

������������������������������������

�� ��� ����������

Designed to meet the requirements of ;

• HTM 2022 Medical Gas Pipeline Systems.

• C11 NHS Model Engineering Specification – Medical Gases.

• BS EN 737-3 Pipelines for compressed medical gases and vacuum.

• BS EN 739 Low pressure hose assemblies for use with medical gases.

• BS EN 475 Medical devices – Electrically generated alarm signals.

top related