bell nozzles
Post on 18-Oct-2015
5 Views
Preview:
DESCRIPTION
TRANSCRIPT
Slide 1
IntroductionTruncated nozzle designed for PR=1030 with 87.72in length. Unstructured grids with 1,80,000 cells.No inflation at wall boundaries.RNG K-e turbulence model is used with enhanced wall treatment.Investigated and compared for two casesChen Nozzle contour(from coordinates)MOC contour for same design conditions.Investigated for two cases (BC at edges):Pressure Far-field Pressure-outlet
Chen geometry@5bar-PFConvergedNet mass flow rate =0.8190kg/sQualitatively acceptable
Chen geometry@10bar-PFIssuesAbsolute pressure limited to 1e0 PaTemp. limited to 1e0kIncorrect Physical results
K-e chen@5bar-POReversed flow is observed.
MOC@5bar-PFIssuesAbsolute pressure limited to 1e0 PaTemp. limited to 1e0kIncorrect Physical resultsTime step reduced due to excessive temp changes
MOC@5bar-POQualitatively acceptibleObserved for only 5000 iterations.Residuals are observed to be still decreasing.Net mdot = -499.323kg/s.(PO)
MOC@15bar-POReversed flow is observed at PO boundaries.Net mdot =-623.11kg/sResiduals-almost constant
MOC@25bar-POReversed flow is observed at PO boundaries.Net mdot =-1750.1653kg/sResiduals-almost constantStill iterations has to be done
top related