best ways to prevent deposit in engine

Best Ways To Prevent Deposit In Engine

The combustion process helps the engine to generate energy to drive the vehicle smoothly which provides a

trouble-free journey to the user.

But on the other hand, combustion process also causes the deposit of grim or dirt in the engine that lowers down the

engine productivity day by day.

The engine deposit gradually causes more serious problems like hesitation and stalling if they are left unattended in the first

stage.

Different Ways To Remove Engine Deposit :-

Removing engine deposit in general involves pouring additive to the gas tank.

But the cleaning process is different for different areas of engine .

The use of additive in engine can clean out areas like fuel injector, intake valve, combustion chamber etc, and the other parts are

cleaned manually.

The manual cleaning deals with the deposits in throttle body which can be removed by using a cleaning spray.

How Engine Deposits Are Formed?

As per Castrol Oil company, there are some top reasons that helps to increase the engine deposit.

:- Long time idling with short trips prevents the oil from full combustion.

:- The increase in the environmental contaminants in the

engine fasten the deposit.

:- Excess condensation which creates contaminants in the oil with moisture.

:- If the engine oil is contaminated, then it can distribute the contaminants throughout the

engine in the combustion process.

The deposit is comprised of partially burned fuel, metal fragments or dirt from engine components etc.

Once the blockage established, the new contaminants settle on the top rather than flowing with oil and block the oil

flow.

What Are The Outcomes Of The Build Up And How To Prevent It?

:- The deposit inside the injector can cause the engine to run lean, lean misfire, rough idle, hesitation, poor fuel economy etc.

:- The injector build up is caused by frequent short trips, the shorter the trip the faster the build up.

:- The continuous build up in throttle body reduces the air flow inside the engine and that caused by fuel vapor.

:- The throttle build up can affect the idling quality and smoothness of drive if not taken care in the first stage.

:- The deposit in intake valve can cause loss of energy and soak the fuel spray instantly.

:- This build up disturbs the air-fuel ratio and cause lean fuel, hesitation and decrease performance of the vehicle.

:- Deposit of debris in combustion chamber on the top of the piston affects the compression ratio of engine and increases the

need of octane-rich fuel for vehicle.

:- Too much deposit can damage head gasket, piston rings and road bearings if unattended in first stage of build up.