beths pencil box

BETHS PENCIL BOX

This is a pictures of my 250 mm piece of wood

This is my piece of wood cut half way and I am about to chisel it!

This is me when I was using the routing machine

and this is what it turned out like!!!

THIS IS WHEN MY BOX WAS CLAMPED TOGETHER

This is my box finished all it needs now is a coat of vanish

Here it is varnished

THESE ARE THE TOOLS I USED

This is the marking gauge I used to mark where I wanted to chisel up to .

This is the saw that I used to cut with.

These are the goggles I used to protect my eyes.

These are the ear muffs I used to protect my ear drums.

These are the clamps I used so that my box would glue together.

This is the mallet I used to chisel with.

This is the putty I used to fill the holes with.

This is the varnish I used to make my box shiny

This is the pyro pen I used to burn patterns on my box

THE HAMMER AND NAILS I USED

This is the sand paper I used to make

my box smooth.

This is the chisel I used.

This is the disc sander I used to make my box smooth and

to round off the edges.

This is the plane I use to cut of edges.

This is the nail punch I used so the nails didn’t stick out.

BY BETH PRATT