bios setup - 404 - file or directory not...

BIOS Setup

User’s GuideRev.1.0

Copyright© 2016 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademarks mentioned in this manual are legally registered to their respective owners.

DisclaimerInformation in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.

Documentation ClassificationsIn order to assist in the use of this product, GIGABYTE provides the following types of documentations: For detailed product information, carefully read the User's Manual.

For more information, visit our website at:

http://b2b.gigabyte.com

You are a professional? Get an access to our complete source of sales, marketing & technical materials at:

http://reseller.b2b.gigabyte.com

- 3 -

Table of Contents

Chapter 1 BIOS Setup ....................................................................................................41-1 The Main Menu ................................................................................................ 61-2 Advanced Menu ............................................................................................... 8

1-2-1 CPUConfiguration ....................................................................................................91-2-2 SATAConfiguration.................................................................................................131-2-3 S5RTCWakeSettings ...........................................................................................141-2-4 PCISubsystemSettings .........................................................................................161-2-4-1 SlotConfiguration ...................................................................................................172-2-5 Hardware Monitor ...................................................................................................181-2-6 SerialPortConsoleRedirection .............................................................................191-2-7 Network Stack ........................................................................................................231-2-8 TrustedComputing .................................................................................................241-2-9 IntelTXTInformation ..............................................................................................251-2-10 CSMConfiguration .................................................................................................261-2-11 Intel (R) Thunderbolt ...............................................................................................281-2-12 NVMeConfiguration ...............................................................................................291-2-13 AMTConfiguration ..................................................................................................301-2-14 Intel(R)BIOSGuardTechnology ............................................................................321-2-15 Main Board Function ..............................................................................................331-2-16 Intel(R)I210GigabitNetworkConnection .............................................................341-2-17 Driver Health ...........................................................................................................36

1-3 ChipsetMenu ................................................................................................. 371-3-1 SystemAgent(SA)Configuration ............................................................................381-3-1-1 GraphicConfiguration .............................................................................................391-3-1-2 PEGPortConfiguration ..........................................................................................401-3-2-3 MemoryConfiguration ............................................................................................421-3-2 PowerPolicy ...........................................................................................................44

1-4 EventLogsMenu ........................................................................................... 461-4-1 ChangeSmbiosEventLogSettings .......................................................................471-4-2 ViewSmbiosEventLog ..........................................................................................49

1-5 SecurityMenu ................................................................................................ 501-5-1 SecureBootmenu .................................................................................................511-5-1-1 KeyManagement .................................................................................................52

1-6 Boot Menu ...................................................................................................... 531-7 Exit Menu ....................................................................................................... 541-8 BIOSBeepCodes .......................................................................................... 551-9 BIOSRecoveryInstruction ............................................................................. 56

BIOS Setup - 4 -

BIOS (Basic Input andOutputSystem) recordshardwareparameters of the system in theEFI on themotherboard.Itsmajorfunctions includeconductingthePower-OnSelf-Test(POST)duringsystemstartup,saving systemparameters and loadingoperating system,etc.BIOS includesaBIOSSetupprogram that allowstheusertomodifybasicsystemconfigurationsettingsortoactivatecertainsystemfeatures.Whenthepoweristurnedoff,thebatteryonthemotherboardsuppliesthenecessarypowertotheCMOStokeeptheconfigurationvaluesintheCMOS.

ToaccesstheBIOSSetupprogram,presstheDEL>keyduringthePOSTwhenthepoweristurnedon.

Chapter 1 BIOS Setup

• BIOSflashing is potentially risky, if youdonot encounter problemsof using the currentBIOSversion, it isrecommendedthatyoudon'tflashtheBIOS.ToflashtheBIOS,do itwithcaution.InadequateBIOSflashingmayresultinsystemmalfunction.

• Itisrecommendedthatyounotalterthedefaultsettings(unlessyouneedto)topreventsysteminstabilityorotherunexpectedresults. Inadequatelyaltering thesettingsmayresult insystem'sfailuretoboot.Ifthisoccurs,trytocleartheCMOSvaluesandresettheboardtodefaultvalues.(Refer to the Exitsectioninthischapterorintroductionsofthebattery/clearingCMOSjumperinChapter1forhowtocleartheCMOSvalues.)

BIOS Setup Program Function Keys <f><g> Movetheselectionbartoselectthescreen <h><i> Movetheselectionbartoselectanitem <+> Increasethenumericvalueormakechanges <-> Decreasethenumericvalueormakechanges <Enter> Executecommandorenterthesubmenu <Esc> MainMenu:ExittheBIOSSetupprogram Submenus:Exitcurrentsubmenu <F1> Showdescriptionsofgeneralhelp <F3> RestorethepreviousBIOSsettingsforthecurrentsubmenus <F9> LoadtheOptimizedBIOSdefaultsettingsforthecurrentsubmenus <F10> SaveallthechangesandexittheBIOSSetupprogram

- 5 - BIOS Setup

Main ThissetuppageincludesalltheitemsinstandardcompatibleBIOS. Advanced ThissetuppageincludesalltheitemsofAMIBIOSspecialenhancedfeatures. (ex:Autodetectfanandtemperaturestatus,automaticallyconfigureharddiskparameters.) Chipset ThissetuppageincludesallthesubmenuoptionsforconfiguringthefunctionofNorthBridgeandSouth

Bridge. (ex:Autodetectfanandtemperaturestatus,automaticallyconfigureharddiskparameters.) Security Change,set,ordisablesupervisoranduserpassword.Configurationsupervisorpasswordallowsyouto

restrictaccesstothesystemandBIOSSetup. AsupervisorpasswordallowsyoutomakechangesinBIOSSetup. AuserpasswordonlyallowsyoutoviewtheBIOSsettingsbutnottomakechanges. Event Log ThissetuppageprovidesprovidesitemstoviewtheBIOSeventlogandtheBMCsystemeventlog. Boot Thissetuppageprovidesitemsforconfigurationofbootsequence. Exit Saveall thechangesmade in theBIOSSetupprogramto theCMOSandexitBIOSSetup.(Pressing

<F10>canalsocarryoutthistask.) Abandonall changesand theprevious settings remain in effect.Pressing<Y> to the confirmation

messagewillexitBIOSSetup.(Pressing<Esc>canalsocarryoutthistask.)

BIOS Setup - 6 -

1-1 The Main MenuOnceyouentertheBIOSSetupprogram,theMainMenu(asshownbelow)appearsonthescreen.Usearrowkeystomoveamongtheitemsandpress<Enter>toacceptorenterothersub-menu.Main Menu HelpTheon-screendescriptionofahighlightedsetupoptionisdisplayedonthebottomlineoftheMainMenu.Submenu HelpWhile inasubmenu,press<F1>todisplayahelpscreen(GeneralHelp)of functionkeysavailable for themenu.Press<Esc>toexitthehelpscreen.HelpforeachitemisintheItemHelpblockontherightsideofthesubmenu.

• Whenthesystemisnotstableasusual,selecttheRestore Defaultsitemtosetyoursystemtoitsdefaults.

• TheBIOSSetupmenusdescribedinthischapterareforreferenceonlyandmaydifferbyBIOSversion.

- 7 - BIOS Setup

BIOS Information Porject Name (Note)

Displaytheprojectnameinformation. Porject Version

DisplayversionnumberoftheBIOSsetuputility. BIOS Build Date and Time

DisplaysthedateandtimewhentheBIOSsetuputilitywascreated. NVMe Mode(Note)

DisplaystheNVMemodeinformation Onboard LAN Information LAN MAC Address(Note)

DisplaystheLANMACaddressinformation. Memory Information Total Memory

Displaythetotalmemorysizeoftheinstalledmemory. System Date

Setthedatefollowingtheweekday-month-day-yearformat. System Time

Setthesystemtimefollowingthehour-minute-secondformat.

(Note) Thisparameterwillbedifferbaseontheproductwhichyoupurchased.

BIOS Setup - 8 -

1-2 Advanced MenuTheAdvancedmenudisplaysubmenuoptionsforconfiguringthefunctionofvarioushardwarecomponents.Selectasubmenuitem,thenpressEntertoaccesstherelatedsubmenuscreen.

- 9 - BIOS Setup

1-2-1 CPUConfiguration

BIOS Setup - 10 -

CPUConfiguration CPU Type/Signature/Microcode Patch/Max CPU Speed/ Min CPU Speed/CPU Speed/

Processor Cores/Intel HT Technology/Intel VT-x Technology/Intel SMX Technology Displaysthetechnicalspecificationsfortheinstalledprocessor.

64-bit DisplaythesupportedinformationofinstalledCPU.

EIST Technology DisplayIntelEISTTechnologyfunctionsupportinformation.

CPU C3 state DisplaythesupportinformationofCPUC3statefeature.

CPU C6 state DisplaythesupportinformationofCPUC6statefeature.

CPU C7 state DisplaythesupportinformationofCPUC7statefeature.

Cache Information L1 Data Cache/L1 Code Cache/L2 Cache/L3 Cache/L4 Cache

Displaysthetechnicalspecificationsfortheinstalledprocessor. Hyper-threading

TheIntelHyperThreadingTechnologyallowsasingleprocessortoexecutetwoormoreseparate threadsconcurrently.Whenhyper-threadingisenabled,multi-threadedsoftwareapplicationscan executetheirthreads,therebyimprovingperformance. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

- 11 - BIOS Setup

(Note) ThisitemispresentonlyifyouinstallaCPUthatsupportsthisfeature.Formoreinformationabout IntelCPUs'uniquefeatures,pleasevisitIntel'swebsite.

Active Processor Cores (Note)

AllowsyoutodeterminewhethertoenableallCPUcores. Optionsavailable:All/1/2/3.DefaultsettingisAll.

Overclocking lock Enable/DisableOverclockinglock. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Intel Virtualization Technology SelectwhethertoenabletheIntelVirtualizationTechnologyfunction.VTallowsasingleplatformtorun multipleoperatingsystemsinindependentpartitions. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Hardware Prefetcher Selectwhethertoenablethespeculativeprefetchunitoftheprocessor. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Adjacent Cache Line Prefetch Whenenabled,cachelinesarefetchedinpairs.Whendisabled,onlytherequiredcachelineisfetched. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

CPU AES Enable/DisableCPUAdvancedEncryptionStandardinstructions. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Boot performance mode ConfiguretheBootperformancemode. Optionsavailable:TurboPerformance/MaxNon-TurboPerformance/Maxbettery/TurboPerformance.

DefaultsettingisTurbo Performance. Hardware P State

Enable/DisableHardwarePStatefeature. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Intel (R) SpeedStep(tm) (Enhanced Intel SpeedStep Technology) ConventionalIntelSpeedStepTechnologyswitchesbothvoltageandfrequencyintandembetweenhigh andlowlevelsinresponsetoprocessorload. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Turbo Mode Whenthisitemisenabled,tjeprocessorwillautomaticallyrampuptheclockspeedof1-2ofits processingcorestoimproveitsperformance. Whenthisitemisdisabled,theprocessorwillnotoverclockanyofitscore. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Package Power Limit MSR Lock Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Power Limit 1 Lock Override Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Power Limit 2 Lock Override Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

BIOS Setup - 12 -

Power Limit 2 Pressnumerickeystodefinethedesiredvalues.

1-Core/2-Core/3-Core/4-Core Ratio Limit Override (Note)

Pressnumerickeystodefinethedesiredvalues. Platform PL1 Enable

Enable/DisablePlatformpowerlimit1programming.Ifthisoptionisdisabled,itactivatesthePlatform PowerLimit1valuetobeusedbytheprocessortolimittheaveragepowerofgiventimewindow. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Platform PL2 Enable Enable/DisablePlatformpowerlimit2programming.Ifthisoptionisdisabled,BIOSwillprogramthe defaultvaluesforPlatformPowerLimit2. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

CPU C State Enable/DisableCPUCStatefeature. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Enhanced C-state Enable/DisableC1EStatefeature. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

C-State Auto Demotion ConfigurestatefortheC-Stateautodemotion. Optionsavailable:Disabled/C1/C3/C1andC3.DefaultsettingisC1 and C3.

C-State Un-demotion ConfigurestatefortheC-Stateundemotion. Optionsavailable:Disabled/C1/C3/C1andC3.DefaultsettingisC1 and C3.

Package C state demotion ConfigurestatefortheC-Statepackagedemotion. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Package C state undemotion ConfigurestatefortheC-Statepackageundemotion. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

CFG lock Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Package C State Limit ConfigurestatefortheC-Statepackagelimit. Optionsavailable:C0/C1/C3/C6/C7/C7s/C8/C9/C10/Auto.DefaultsettingisAuto.

CFG Enable/DisableCFGlockfunction. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

(Note) ThisitemispresentonlyifyouinstallaCPUthatsupportsthisfeature.Formoreinformationabout IntelCPUs'uniquefeatures,pleasevisitIntel'swebsite.

- 13 - BIOS Setup

1-2-2 SATAConfiguration

SATA Mode Selection RAIDMode:WhensettoRAID,theSATAcontrollerenablesbothitsRAIDandAHCIfunctions.Youwill

beallowsaccesstheRAIDsetuputilityatboottime. ACHIMode:When set toAHCI,theSATAcontroller enables itsAHCI functionality.Then theRAID

functionisdisabledandcannotbeaccesstheRAIDsetuputilityatboottime. Optionsavailable:RAID/ACHI/Disabled.DefaultsettingisACHI Mode.

Serial Port/M.2 Port(Note)

Enable/DisableSerialATAPort0/1/2/3/4/5. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Hot Plug (for Serial SATA Port/M.2 Port)(Note)

Enable/DisableHotPlugsupportforSerialATAPort0/1/2/3/4/5. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

(Note) Thisparameterwillbedifferbaseontheproductwhichyoupurchased.

BIOS Setup - 14 -

1-2-3 S5 RTC Wake SettingsWake system from S5 is set to Fixed time

Wake system from S5 is set to Dynamic time

- 15 - BIOS Setup

Wake system from S5 EnableordisableSystemwakeonalarmevent.Whenenabled,Systemwillwakeonthehr:min:sec specified.DefaultsettingisDisabled.

Wake up hour(Note1)

Press<+>and<->todefinethewakeuphour. Wake up minute(Note1)

Press<+>and<->todefinethewakeupminute. Wake up second(Note1)

Press<+>and<->todefinethewakeupsecond. Wake up minute(Note2)

Pressthenumerickeytodefinethewakeupminute.

(Note1) ThisitemappearswhenWake system from S5issettoFixed time.(Note2) ThisitemappearswhenWake system from S5issettoDynamic time.

BIOS Setup - 16 -

1-2-4 PCI Subsystem Settings

Slotconfiguration Press[Enter]forconfigurationofadvanceditems.

PCI Device Common Settings: PCI Latency Timer

ValuetobeprogrammedintoPCILatencyTimerRegister. Optionsavailable:32PCIBusClocks/64PCIBusClocks/96PCIBusClocks/128PCIBusClocks/160

PCIBusClocks/192PCIBusClocks/224PCIBusClocks/248PCIBusClocks/. Defaultsettingis32 PCI Bus Clocks.

VGA Palette Snoop Enable/DisableVGAPaletteTegistersSnooping. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Above 4G MMIO Enable/DisableAbove4GMemoryMappedInput/Output. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

- 17 - BIOS Setup

PCI Express Slot I/O ROM(Note) Whenenabled,ThissettingwillinitializethedeviceexpansionROMfortherelatedPCI-Eslot. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Onboard LAN Controller ConfigureonboardLANdevices. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Onboard LAN I/O ROM Enable/DisableonboardLANdevicesandinitializedeviceexpansionROM. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

1-2-4-1SlotConfiguration

(Note) Thisparameterwillbedifferbaseontheproductwhichyoupurchased.

BIOS Setup - 18 -

2-2-5 Hardware MonitorPressEnter to view theHardwareMonitor screenwhichdisplaysa real-time recordof theCPU/systemtemperature,andfanspeed,Itemsonthiswindowarenon-configurable.

- 19 - BIOS Setup

1-2-6 Serial Port Console Redirection

BIOS Setup - 20 -

- 21 - BIOS Setup(Note) Advanceditemspromptwhenthisitemisdefined.

COM1/COM2/Serial Port for Out-of Band Management/Windows Emergency Management Service (EMS)

Console Redirection (Note) Selectwhethertoenableconsoleredirectionforspecifieddevice.Consoleredirectionenablesusersto

managethesystemfromaremotelocation. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Legacy Console Redirection Settings Press[Enter]forconfigurationofadvanceditems.

Legacy Serial Redirection Port Optionsavailable:COM1/COM2/SerialOverLAN.

Console Redirection Settings (for COM1/COM2 & serial Over LAN) Terminal Type

Selectaterminaltypetobeusedforconsoleredirection. Optionsavailable:VT100/VT100+/ANSI/VT-UTF8.

Bits per second Selectthebaudrateforconsoleredirection. Optionsavailable:9600/19200/57600/115200.

Data Bits Selectthedatabitsforconsoleredirection. Optionsavailable:7/8

Parity Aparitybitcanbesentwiththedatabitstodetectsometransmissionerrors. Even:paritybiis0ifthenumof1'sinthedatabitsiseven. Odd:paritybitis0ifnumof1'sthedatabitsisodd. Mark:paritybitisalways1.Space:Paritybitisalways0. MarkandSpaceParitydonotallowforerrordetection. Optionsavailable:None/Even/Odd/Mark/Space.

Stop Bits Stopbitsindicatetheendofaserialdatapacket.(Astartbitindicatesthebeginning).Thestandard settingis1stopbit.Communicationwithslowdevicesmayrequiremorethan1stopbit. Optionsavailable:1/2.

Flow Control Flowcontrolcanpreventdatalossfrombufferoverflow.Whensendingdata,ifthereceivingbuffersare

full,a'stop'signalcanbesenttostopthedataflow.Oncethebuffersareempty,a'start'signalcanbesenttore-starttheflow.Hardwareflowcontrolusestwowirestosendstart/stopsignals.

Optionsavailable:None/HardwareRTS/CTS. VT-UTF8 Combo Key Support (Note)

Enable/DisableVT-UTF8ComboKeySupport. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Recorder Mode (Note) Whenthismodeenabled,onlytextwillbesend.ThisistocaptureTerminaldata. Optionsavailable:Enabled/Disabled.

BIOS Setup - 22 -

Resolution 100x31 (Note) Enablesordisablesextendedterminalresolution. Optionsavailable:Enabled/Disabled.

Legacy OS Redirection Resolution (Note) OnLegacyOS,thenumberofRowsandColumnssupportedredirection. Optionsavailable:80x24/80X25.

Putty KeyPad (Note) SelectfunctionFunctionKeyandKeyPadonPutty. Optionsavailable:VT100/LINUX/XTERMR6/SCO/ESCN/VT400.

Redirection After BIOS POST (Note) ThisoptionallowsusertoenableconsoleredirectionafterO.Shasloaded. Optionsavailable:AlwaysEnable/BootLoader.DefaultsettingisAlways Enable.

Out-of-Bnad Mgmt Port MicrosoftWindowsEmerencyManagementService(EMS)allowsforremotemanagementofaWindows

ServerOSthroughaserialport. Optionsavailable:COM1/COM2.

(Note) Advanceditemspromptwhenthisitemisdefined.

- 23 - BIOS Setup

1-2-7 Network Stack

Network stack Enable/DisableUEFInetworkstack. Optionsavailable:Enabled/DIsabled.DefaultsettingisEnabled.

Ipv4 PXE Suppor Enable/DisableIpv4PXEfeature. Optionsavailable:Enabled/DIsabled.DefaultsettingisDisabled.

Ipv6 PXE Support Enable/DisableIpv6PXEfeature. Optionsavailable:Enabled/DIsabled.DefaultsettingisDisabled.

PXE boot wait time Pressnumerickeystodefinethedesiredvalues.

Media detect count Pressnumerickeystodefinethedesiredvalues.

BIOS Setup - 24 -

1-2-8 Trusted Computing

Configuration Security Device Support

SelectEnabledtoactivateTPMsupportfeature. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Current Status Information DisplaycurrentTPMstatusinformation.

- 25 - BIOS Setup

1-2-9 Intel TXT Information

IntelTXTConfiguration Chipset/BiosAcm/Chipset Txt/ Cpu Txt/Error Code/Clasee Code/Major Code/

Minor Code DisplaysthetechnicalspecificationsfortheIntelTXTinformation.

BIOS Setup - 26 -

1-2-10 CSMConfiguration

CompatibilitySupportModuleConfiguration CSM Support

Enable/DisableCompatibilitySupportModule(CSM)support. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

CSM16 Module Version DisplayCSMModuleversioninformation.

Gate20 Active UponRequest:GA20canbedisabledusingBIOSservices. Always:DonotallowdisablingGA20;thisoptionisusefulwhenanyRTcodeisexecutedabove1MB. Optionsavailable:UponRequest/Always.DefaultsettingisUpon Request.

Option ROM Messages OptionROMMessages. Optionsavailable:ForceBIOS/KeepCurrent.DefaultsettingisForce BIOS.

INT19 Endless Retry Enabled:Allowedheadlessretryboot Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Bootoptionfilter Determineswhichdevicessystemwillbootto. Optionsavailable:UEFIandLegacy/Legacyonly/UEFIonly.DefaultsettingisUEFI and Legacy.

- 27 - BIOS Setup

Option ROM execution Network

ControlstheexecutionUEFIandLegacyPXEOpROM. Optionsavailable:Donotlaunch/UEFIonly/Legacy.DefaultsettingisLegacy.

Storage ControlstheexecutionUEFIandLegacyStorageOpROM. Optionsavailable:Donotlaunch/UEFIonly/Legacy.DefaultsettingisLegacy.

Video ControlstheexecutionUEFIandLegacyVideoOpROM. Optionsavailable:Donotlaunch/UEFIonly/Legacy.DefaultsettingisLegacy.

Other PCI devices DeterminesOpROMexecutionpolicyfordevicesotherthannetwork,Storage,orVideo. Optionsavailable:UEFI/Legacy.DefaultsettingisLegacy.

BIOS Setup - 28 -

1-2-11 Intel (R) Thunderbolt

Intel(R)ThunderboltConfiguration Displaysthetechnicalspecificationsforthethunderbolt.

Intel Thunderbolt Technology(Note)

Enable/DIsableThunderboltfunction. Optionsavailable:FullyDisabled/Enabled/Disabled.DefaultsettingisFully Disabled.

(Note) Thisparameterwillbedifferbaseontheproductwhichyoupurchased.

- 29 - BIOS Setup

1-2-12 NVMeConfiguration

NVMe controller and Drive information DisplaysNVMecontrollerandDriveinformation.

BIOS Setup - 30 -

1-2-13 AMTConfiguration

Intel AMT Enable/DisableIntelActiveManagmentTechnologyBIOSExtension. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

BIOS Hotkey Pressed Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

MEBx Selection Screen Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

HideUn-ConfigureMEConfiguration Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

MEBx Debug Message Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Un-ConfigureME Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Amt Wait Timer Pressthenumerickeytodefinethewaittime.

ASF Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Active Remote Assistance Process Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

USBConfigure Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

- 31 - BIOS Setup

PET Progress Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

AMT CIRA Timeout Pressthenumerickeytodefinethetimer.

WatchDog Enable/DisableWatchDogfunction. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

OS Timer/BIOS Timer Pressthenumerickeytodefinethetimer. PleasenotethatthisitemisconfigurablewhenWatchDogissettoEnabled.

BIOS Setup - 32 -

1-2-14 Intel(R) BIOS Guard Technology

Intel BIOS Guard Support Enable/DisableIntelBIOSGuardSupport. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

- 33 - BIOS Setup

1-2-15 Main Board Function

PCIE Runtime Error Enable/DisableRuntimeErrorsettings. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Chassis Opened Warning Configurechassisopeningintrusionalertfunction. Optionsavailable:Enabled/Disabled/Clear.DefaultsettingisDisabled.

SATA Signal Mode SelectSATARx/iEMT. Optionsavailable:iEMTMode/RxMode.DefaultsettingisiEMT Mode.

BIOS Setup - 34 -

1-2-16 Intel (R) I210 Gigabit Network Connection

- 35 - BIOS Setup

PORT CONFIGURATION MENU NICConfiguration

Press[Enter]forconfigurationofadvanceditems. Blink LEDs (range 0-15 seconds)

BlinkLEDsforthespecifiedduration(upto15seconds). Pressthenumberickeystoinputthedesiredvalue.

PORT CONFIGURATION INFORMATION UEFI Driver

DisplaytheUEFIdriverinformation. Adapter PBA

DisplaytheAdapterPBAinformation. Chip Type

DisplaytheChiptype. PCI Device ID

DisplaythePCIdeviceID. Bus:Device:Function

DisplaythenumberofBus/Device/Function Link Status

Displaythelinkstatus. MAC Address

DisplaytheFactoryMACaddressinformation. Virtual MAC Address

DisplaythevirtualMACaddressinformation. NICConfiguration Link Speed

Changelinkspeedduplexforcurrentport. Optionsavailable:AutoNeg/10MbpsHalf/10MbpsHalf/10MbpsHalf/100MbpsFull. DefaultsettingisAutoNeg.

Wake On LAN Enable/DisableWakeOnLANfeature. Optionsavailable:Enabled/DIsabled.DefaultsettingisEnabled.

BIOS Setup - 36 -

1-2-17 Driver Health

Driver Health Displaythedriverhealthstatus.Press[Enter]toviewtheadvanceditems.

- 37 - BIOS Setup

1-3 Chipset Menu

Onboard Audio(Note1)

Enable/Disableonboardaudiodevice. Optionsavailable:Enabled/DIsabled.DefaultsettingisEnabled.

VT-d Enable/DisableIntelVirtualizationTechnologyforDirectedI/O(VT-d)feature. Optionsavailable:Enabled/DIsabled.DefaultsettingisEnabled.

xDCI Support Enable/DisablexDCI(USBOTGDevice) Optionsavailable:Enabled/DIsabled.DefaultsettingisDisabled.

Restore on AC Power Loss (Note2) DefinesthepowerstatetoresumetoafterasystemshutdownthatisduetoaninterruptioninACpower.

WhensettoLastState,thesystemwillreturntotheactivepowerstatepriortoshutdown.WhensettoStayOff,thesystemremainsoffafterpowershutdown.

Optionsavailable:LastState/StayOff/PowerOn.ThedefaultsettingdependsontheBMCsetting. ERR Support

Enable/DisableDeepSleepfunction. Optionsavailable:Enabled/DIsabled.DefaultsettingisDisabled.

System Agent (SA) Name Press[Enter]forconfigurationofadvanceditems.

Power Policy Press[Enter]forconfigurationofadvanceditems.

(Note1) Thisparameterwillbedifferbaseontheproductwhichyoupurchased.(Note2) WhenthepowerpolicyiscontrolledbyBMC,pleasewaitfor15-20secondsforBMCtosavethe lastpowerstate.

BIOS Setup - 38 -

1-3-1 SystemAgent(SA)Configuration

CRID Support Enable/DisableCRIDsupport. Optionsavailable:Enabled/DIsabled.DefaultsettingisDisabled.

GraphicsConfiguration Press[Enter]forconfigurationofadvanceditems.

PEGPortConfiguration Press[Enter]forconfigurationofadvanceditems.

MemoryConfiguration Press[Enter]forconfigurationofadvanceditems.

- 39 - BIOS Setup

1-3-1-1GraphicConfiguration

GraphicConfiguration Skip Scanning External Gfx Card

Optionsavailable:Enabled/Disabled. DefaultsettingisDisabled.

Primary PEG ConfigurethePrimarydisplaydevice. Optionsavailable:Auto. DefaultsettingisAuto.

BIOS Setup - 40 -

1-3-1-2PEGPortConfiguration

PEG 0:1:0 Displaytheconfigurationinformation.

Enable Root Port Optionsavailable:Auto/Enabled/Disabled.DefaultsettingisAuto.

Max Link Speed Optionsavailable:Auto/Gen1/Gen2/Gen3.DefaultsettingisAuto.

De-emphasis Control ConfiguretheDe-emphasiscontrolonPEG. Optionsavailable:-6dB/-3.5dB.Defaultsettingis-3.5 dB. Optionsavailable:Auto/Gen1/Gen2/Gen3.DefaultsettingisAuto.

ASPM ControlASPMsupportforthePEGDevice.ThishasnoeffectifPEGisnotthecurrentlyactivedevice. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

PEG 0:1:1 Displaytheconfigurationinformation.

Enable Root Port Optionsavailable:Auto/Enabled/Disabled.DefaultsettingisAuto.

Max Link Speed Optionsavailable:Auto/Gen1/Gen2/Gen3.DefaultsettingisAuto.

- 41 - BIOS Setup

De-emphasis Control ConfiguretheDe-emphasiscontrolonPEG. Optionsavailable:-6dB/-3.5dB.Defaultsettingis-3.5 dB. Optionsavailable:Auto/Gen1/Gen2/Gen3.DefaultsettingisAuto.

ASPM ControlASPMsupportforthePEGDevice.ThishasnoeffectifPEGisnotthecurrentlyactivedevice. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

PEG 0:1:2 Displaytheconfigurationinformation.

Enable Root Port Optionsavailable:Auto/Enabled/Disabled.DefaultsettingisAuto.

Max Link Speed Optionsavailable:Auto/Gen1/Gen2/Gen3.DefaultsettingisAuto.

Program PCIe ASPM after OpROM Enable/DisableProgramPCIeASPMafterOpROM. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

BIOS Setup - 42 -

1-3-2-3MemoryConfiguration

Memory Information Memory Frequency

Displaythefrequencyinformationofinstalledmemory. Total Memory

DetermineshowmuchtotalmemoryispresentduringthePOST. DIMMProfile

Optionsavailable:DefaultDIMMprofile.DefaultsettingisDefaultDIMMprofile. DIMM Information(Note) Install DIMMs Status

ThesizeofmemoryinstalledoneachoftheDDR4slots. Maximum Memory Frequency

Configurememoryfrequency. DefaultsettingisAuto.

ECC Support Optionsavailable:Auto/Disabled/Enabled.DefaultsettingisEnabled.

Max TOLUD MaximumValueofTOLUD.DynamicassignmentwouldadjustTOLUDautomaticallybasedonlargest MMIOlengthofinstalledgraphiccontroller. Optionsavailable:Dynamic/3.5GB/3.25GB/3GB/2.75GB/2.5GB/2.25GB/2GB/1.75GB/1.5GB/ 1.25GB/1GB.DefaultsettingisDynamic.

(Note) Thisparameterwillbedifferbaseontheproductwhichyoupurchased.

- 43 - BIOS Setup

Memory Scrambler Enable/DisableMemoryScramblersupport. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Channel A DIMM Control Enable/DisableDIMMsonChannelA. Optionsavailable:EnablebothDIMMs/DisableDIMM0/DisableDIMM1/DisablebothDIMMs. Defaultsettingis Enable both DIMMs.

Channel B DIMM Control Enable/DisableDIMMsonChannelB. Optionsavailable:EnablebothDIMMs/DisableDIMM0/DisableDIMM1/DisablebothDIMMs. Defaultsettingis Enable both DIMMs.

Memory Remap Enable/Disablememoryremapabove4GB. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

REFRESH_2X_MODE Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Fast Boot Enable/Disablefastbootfunction. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

BIOS Setup - 44 -

1-3-2 Power Policy

Power Policy Power Policy Quick Settings

Optionsavailable:Standard/BestPerformance/EnergyEfficient.DefaultsettingisStandard. Intel (R) SpeedStep(tm) (Enhanced Intel SpeedStep Technology)

ConventionalIntelSpeedStepTechnologyswitchesbothvoltageandfrequencyintandembetweenhigh andlowlevelsinresponsetoprocessorload. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Package C State Limit ConfigurestatefortheC-Statepackagelimit. Optionsavailable:C0/C1/C2/C3/C6/C7/C7s/Auto.DefaultsettingisAuto.

Hyper-threading TheIntelHyperThreadingTechnologyallowsasingleprocessortoexecutetwoormoreseparate threadsconcurrently.Whenhyper-threadingisenabled,multi-threadedsoftwareapplicationscan executetheirthreads,therebyimprovingperformance. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Hardware Prefetcher Selectwhethertoenablethespeculativeprefetchunitoftheprocessor. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Adjacent Cache Line Prefetch Whenenabled,cachelinesarefetchedinpairs.Whendisabled,onlytherequiredcachelineisfetched. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

- 45 - BIOS Setup

Turbo Mode Whenthisitemisenabled,tjeprocessorwillautomaticallyrampuptheclockspeedof1-2ofits processingcorestoimproveitsperformance. Whenthisitemisdisabled,theprocessorwillnotoverclockanyofitscore. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Closed Loop Therm Manage Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

VT-d Enable/DisableIntelVirtualizationTechnologyforDirectedI/O(VT-d)feature. Optionsavailable:Enabled/DIsabled.DefaultsettingisEnabled.

BIOS Setup - 46 -

1-4 Event Logs Menu

Change Smbios Event Log Settings Press[Enter]forconfigurationofadvanceditems.

View Smbios Event Log Press[Enter]forconfigurationofadvanceditems.

- 47 - BIOS Setup

1-4-1 Change Smbios Event Log Settings

Enabling/Disabling Options Smbios Event Log

ChooseoptionstoEnable/DisableloggingofSystembootevent. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Erasing Settings Erasing Event Log

Chooseoptions for erasingSmbiosEvent LogErasing is doneprior to any loggingactivationduringreset.

Optionsavailable:No/Yes,Onnextreset/Yes,Oneveryreset.DefaultsettingisNo. When Log is Full

ChooseoptionsforreactionstoafullSmbiosEventLog. Optionsavailable:DoNothing/EraseImmediately.DefaultsettingisDo Nothing.

Smbios Event Log Standard Settings Log System Boot Event

ChooseoptionstoEnable/DsiableloggingofSystembootevent. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

MECI MultipleEventCountIncrement:Thenumberofoccurrencesofaduplicateeventthatmustpaassbefore

themulti-event counter associatedwith the logentry is updated, specifiedasnumberic value in therange1to33.Press<+>/<->keystoincreaseordecreasethedesiredvalues.

BIOS Setup - 48 -

METW MultipleEventTimeWindow:Thenumberofminuteswhichmust passbetweenduplicate logentries

whichutilizeamultiple-eventcounter.Thevaluerangesfrom0to99minutes.Press<+>/<->keystoincreaseordecreasethedesiredvalues.

Custom Options Log OEM Codes

Enable/DisabletheloggingofEFIStatusCodesasOEMCodes. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Convert OEM Codes Enable/DisabletheconvertingofEFIStatusCodestoStandardSmbiosType. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

- 49 - BIOS Setup

1-4-2 View Smbios Event LogTheSmbiosEventLog isadisplaypageofSmbiosEventLog information. Itemson thiswindowarenon-configurable.PressEntertoViewSmbiosEventLog

BIOS Setup - 50 -

Therearetwotypesofpasswordsthatyoucanset:• AdministratorPassword EnteringthispasswordwillallowtheusertoaccessandchangeallsettingsintheSetupUtility andentertheoperatingsystem.• UserPassword Enteringthispasswordwillrestrictauser’saccesstotheSetupmenus.Toenableordisable thisfield,aAdministratorPasswordmustfirstbeset.

Administrator Password PressEntertoconfiguretheAdministratorpassword.

User Password PressEntertoconfiguretheuserpassword.

Secure Boot menu Press[Enter]forconfigurationofadvanceditems.

1-5 Security MenuTheSecuritymenuallows you to safeguardandprotect the system fromunauthorizeduseby settingupaccesspasswords.

- 51 - BIOS Setup

1-5-1 Secure Boot menu TheSecureBootMenuisapplicablewhenyourdeviceisinstalledtheWindows®8operatinsystem.

System Mode DisplaytheSystemModeState.

Secure Boot DisplaythestatusofSecureBoot.

Vendor Keys Displaystheinstalledvendorkeyinformation.

Secure Boot Enable/DisableSecureBootfunction. Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Secure Boot Mode SecureBootrequiresall theapplications thatarerunningduringthebootingprocesstobepre-signed

withvaliddigital certificates.Thisway, thesystemknowsall thefilesbeing loadedbeforeWindows8loadsandgetstotheloginscreenhavenotbeentamperedwith.

WhensettoStandard,itwillautomaticallyloadtheSecureBootkeysformtheBIOSdatabases. WhensettoCustom,youcancustomizetheSecureBootsettingsandmanuallyloaditskeysfromthe

BIOSdatabase. Optionsavailable:Standard/Custom.DefaultsettingisStandard.

Key Management(Note)

Press[Enter]forconfigurationofadvanceditems.

(Note) AdvanceditemspromptwhenthisitemissettoCutom.

BIOS Setup - 52 -

1-5-1-1 Key Management

Provision Factory Default Keys ForcethesystemtoSetupMode.ThiswillclearallSecureBootVariablessuchasPlatformKey(PK),

Key-exchangeKey(KEK),AuthorizedSignatureDatabase(db),andForbiddenSignauresDatabase(dbx). Optionsavailable:Enabled/Disabled.DefaultsettingisDisabled.

Enroll All Factory Default Keys Press[Enter]toinstallallfactorydefaultkeys.

Save All Secure Boot Variables Press[Enter]tosaveallSecureBootVariables.

Platform Key (PK) PressEntertoconfiguretheadvanceditems.

Key Exchange Key PressEntertoconfiguretheadvanceditems.

Authorized Signature PressEntertoconfiguretheadvanceditems.

Forbidden Signature PressEntertoconfiguretheadvanceditems.

Authorized TimeStamps PressEntertoconfiguretheadvanceditems.

- 53 - BIOS Setup

1-6 Boot MenuTheBootmenuallowsyoutoset thedrivepriorityduringsystemboot-up.BIOSsetupwilldisplayanerrormessageifthelegacydrive(s)specifiedisnotbootable.

BootConfiguration Bootup NumLock State

EnableorDisableBootupNumLockfunction. Optionsavailable:On/Off.DefaultsettingisOn.

Full Screen LOGO Show EnablesordisablesshowingthelogoduringPOST. Optionsavailable:Enabled/Disabled.DefaultsettingisEnabled.

Boot Priority Order Boot Option #1/#2/#3/#4/#5/#6

PressEntertoconfigurethebootpriority.Bydefault,theserversearchesforbootdevicesinthefollowingsecquence:

1. UEFI device.2. Removabledevice.3. Hard drive.4. Network device.

Network Device BBS Priorities PressEntertoconfigurethebootpriority.

Hard Drive BBS Priorities PressEntertoconfigurethebootpriority.

BIOS Setup - 54 -

1-7 Exit MenuTheExitmenudisplaysthevariousoptionstoquitfromtheBIOSsetup.HighlightanyoftheexitoptionsthenpressEnter.

Save Options Save Changes and Reset

Saveschangesmadeandresetthesystem. Optionsavailable:Yes/No.

Discard Changes and Reset Discardschangesmadeandresetthesystem. Optionsavailable:Yes/No.

Default Options Restore Defaults

LoadsthedefaultsettingsforallBIOSsetupparameters.SetupDefaultsarequitedemandingintermsofresourcesconsumption.Ifyouareusinglow-speedmemorychipsorotherkindsoflow-performancecomponentsandyouchoosetoloadthesesettings,thesystemmightnotfunctionproperly.

Optionsavailable:Yes/No. Boot Override

PressEntertoconfigurethedeviceastheboot-updrive. UEFI: Built-in in EFI Shell

Press<Enter>onthisitemtoLaunchEFIShellfromfilesystemdevice.

- 55 - BIOS Setup

1-8 BIOS Beep Codes# of Beeps Description

1 Invalidpassword2 Recoverystarted4 S3Resumefailed4 DXEIPLwasnotfound5 NoConsoleInput/OutputDevicesarefound6 Flashupdateisfailed

BIOS Setup - 56 -

1-9 BIOS Recovery InstructionThesystemhasanembeddedrecoverytechnique.IntheeventthattheBIOSbecomescorruptthebootblockcanbeusedtorestoretheBIOStoaworkingstate.TorestoreyourBIOS,pleasefollowtheinstructionslistedbelow:

Recovery Instruction:

1. Changexxx.ROMtoamiboot.rom.2. Copyamiboot.romandAFUDOS.exetoUSBdiskette.3. SettingBIOSRecoveryjumptoenabledstatus.4. BootintoBIOSrecovery.5. RunProceedwithflashupdate.6. BIOS update.