birck nanotechnology center - purdue university

BNC 105:Orientation & Welcome

Birck Nanotechnology Center

Course Overview• Introductions• Facility Overview• General Lab Safety• BNC Specific policies

• Right-To-Know (RTK)

“New User” informationAs a new user, you can use this link to find

information for Birck.

http://www.nano.purdue.edu

Facility• 21,296 square feet of laboratory

– Heavy Equipment Labs (MBE, CVD, Optics, High Accuracy)

– Light General Labs (Biological, Chemical, Characterization)

– 88 laboratory modules

• 25,252 square feet of cleanroom– Semiconductor Fabrication Cleanroom– Pharmaceutical-Grade Cleanroom– ISO Class 3, 4, 5 (Class 1, 10, 100)– Bay-Chase Design

Scale of Things10-2 m

10-3 m

10-4 m

10-5 m

10-6 m

10-7 m

10-8 m

10-9 m

10-10 m

1 cm

1 mm

100 µm

10 µm

1 µm

100 nm

10 nm

1 nm

0.1 nm

Natural World Manmade World

Mod

ified

from

DO

E fi

le h

ttp://

ww

w.e

r.doe

.gov

/bes

/sca

le_o

f_th

ings

.htm

l

microscale

nanoscale

ISO 14644-1

Class

FED-STD-209E Class

8 100,000

7 10,000

6 1,000

5 100

4 10

3 1

What is a Cleanroom?

0.5µm particles

per meter cubed

0.5µ particles per foot cubed

3,520,000 100,000

352,000 10,000

35,200 1,000

3,520 100

352 10

35 1

• Administrative• Faculty• Laboratory and Cleanroom engineers

– Emergency response team• Physical facilities• Housekeeping• Users (students, post docs, visiting scientists)• Visitors

The Birck Team

Laboratory OrientationLabs on the First Floor

Laboratory OrientationLabs on the Second Floor

ID Card Coding Process1. Complete safety training

• BNC 105 -- General Orientation• BNC 150 -- Safety Fume Hood Training • Special Hazard Training (only when needed)

2. Email from F.I.C. (Faculty in Charge) of lab to Mary Jo Totten (tottenm@purdue.edu) that you are authorized to enter lab and your card will be activated.

3. Make appointment with Mary Jo to meet in BRK 1220 for ID Card creation

Access to labs

ALL other training sessions are requested by contacting individual staff members.

New User Process PresentationCleanroom Processes

• All new processes will be reviewed by the Birck engineering staff

• New users schedule time with the staff to present and discuss their process prior to requesting training on new equipment

• Contact Kenny Schwartz, kfschwar@purdue.edu, to schedule a meeting

13

14

Birck Wiki – Wealth of Infohttps://wiki.itap.purdue.edu/display/BNCWiki/BNCWiki+Home

15

Birck iLabshttps://purdue.ilabsolutions.com/homepage

16

iLabs – CHA Schedule Example

Our biggest concern is your safety!!!

Evacuation Procedures:1. When the alarm sounds leave the building immediately through the nearest exit.2. Alert others to the emergency and ask if they will need help in evacuation.3. Do not use elevators unless instructed to do so by emergency personnel.

• Proceed to the Southeast entrance of Burton Morgan Center• If the Burton Morgan Center is closed (after-hours) then

proceed to the police station lobby.

Safety and Emergency Response Procedures

Laboratory Orientation

BNC Fire Alarm• IMMEDIATELY evacuate the building using

the nearest exit– Do not use the elevators– Ask others in your area if they need assistance

BNC Toxic Gas Alarm• IMMEDIATELY evacuate the building• Use the North, South, and East exits

– Do NOT exit by the gas rooms

• Do not use the elevators

1st Floor Evacuation Routes

2nd Floor Evacuation Routes

Evacuation Meeting PointState Street

Jischze DriveBirck

NanotechnologyCenter

BindleyBiosciences

Center

BurtonMorgan

Housing

parking lot

Purdue Police Station(use in the event Burton MorganIs closed – after hours)

1

2

Tornado/Take Cover Alarm

• Move to a designated storm safe area

• Stay away from windows• Do not call 911 unless you

require emergency assistance

Laboratory OrientationSafety and Emergency Response Procedures

Tornado Shelter Areas

Laboratory SpillsAll spills in the laboratory must be reported to a

Laboratory Staff member immediately to remediate the spill as quickly as possible.

This includes biological materials.

Safety and Emergency Response Procedures

Laboratory Orientation

Bodily Fluid SpillsDo not try to clean this up. Follow the Purdue University

Blood-borne Pathogen procedures.Medical Emergency

1. Call 911 or use the Emergency Call Box to report the incident.2. Don’t move the victim unless safety dictates.

Safety and Emergency Response Procedures

Laboratory Orientation

Policies• Building Emergency Plan can be found at:

– https://www.purdue.edu/discoverypark/birck/operations/safety.php and click on the Building Emergency Plan link under “Helpful Safety Links” at the bottom of the page.

• Lab access– Training is required for escorted access to the labs.– Visitors are allowed

• Lab visitors must be accompanied at all times by a certified lab user.

– Visitors may not handle Hazardous Materials or Equipment

All personnel entering the Birck Nanofabrication Laboratories are required to wear:

• Fully enclosed shoes• Full leg covering – long pants & skirts• Safety glasses (in labs marked as required)

– Personnel entering the Nanofabrication Laboratories must not wear contact lenses.

• Working with chemicals and in fume hoods require additional PPE

Policies

• Pouring chemicals– Splash proof goggles, face shield, chemical resistant apron and

gloves• Chemicals (fume hoods)

– There are two types of fume hoods, acid and solvent.

Policies

NEVER PUT SOLVENTS DOWN DRAINS

Policies

Electronic Ordering & Lab Supplies Ariba

– All chemical orders MUST have an up to date SDS attached to the order for approval by Steve Jurss (BNC Safety Officer)

– All orders must be made using the University’s new electronic ordering system

Lab Supplies delivered daily – give at least 24 hours– Request supplies through Lorraine Fox

foxl@purdue.edu– CR stocked in AM, Labs stocked in PM

Ordering Chemicals• If you need to arrange training to place orders in

Ariba, please contact the BNC Business Office or Secretarial Staff. If there is enough interest in this training, they can arrange to have a class given on site.

• If you have questions in regard to the pre-approved chemical list, please contact Stephen Jurss. If you have questions related to the ordering process, please contact the BNC Business Office or Secretarial Staff.

32

Gas Cylinders

• Gas cylinders must be changed by designated, trained staff personnel.

• DO NOT attempt to change a gas cylinder.– Contact staff before weekend run to verify gas level.

• NO hazardous process gas will be placed in a laboratory

Laboratory OrientationGas and Chemical Delivery Procedures

Gloves are for your protection and the protection of the equipment or process

• Gloves may not be used to:– Open doors– Answer Phones

Laboratory OrientationGloves

• Laser Laboratories– The foremost concern is the danger to one’s eyes and

exposed skin. The user must be trained and certified on working the laser and wear the appropriate eyewear protection.

– Contact REM for laser safety training.• Biology Laboratories

– For biological hazards, special training is necessary.– Contact REM for biological safety training.

• X-Ray sources– Contact REM for X-ray safety training

Special Hazards

Policies

• No food or drinks in labs, galley or subfab.• No Smoking anywhere in the building.• PPE requirements are for all times

Citizenship Violations - Equipment• The Birck disciplinary committee is comprised of two faculty

members, a staff scientist, a student representative, and the engineering manager. Policy and safety violations are first discussed between the engineering manager and the violator(s), after which the level of discipline is recommended to the committee, who determines the final disposition of the issue. The committee can decide penalties from restricted access to suspension, depending on severity.

• All users are responsible for cleaning up after themselves and for leaving their work areas ready for use by others.

• If any user is observed leaving a mess in a hood or near equipment, or leaving an unattended tote not in its proper storage location, they will be subjected to mandatory participation in 4 hours of weekly staff support duties, or a one-week suspension of all cleanroom privileges. This means denied access to the cleanroom for one week.

39

Citizenship Violations – Safety & Housekeeping

Questions?

Laboratory Orientation

RTK TRAINING

• The Purpose of this training is:– Provide employees with knowledge to understand the

hazards of the chemicals they work with– Provide a safer and healthier workplace for all employees– Ensure regulatory compliance with the State and Federal

Right-To-Know Law, 29 CFR 1910.1200

RTK TRAINING• Who is covered under the RTK or Hazard

Communication Program (HCP or HazCom)– Support Service Employees:

• Physical Facilities• Transportation• Printing Services• Airport Operations• Intercollegiate Athletics• Housing and Food Services• Clerical

– Academic Employees:• Support Services (i.e... departmental shops)• Laboratory with non-laboratory use of chemicals

– An Employee is• Anyone who receives a paycheck from

Purdue University• Full-time, Part-time, Temporary, or

Student

RTK TRAINING

• To be informed about the known health and physical hazards in your work area

• To be trained to use proper safety techniques and hygiene practices

• To inform your DTI about accidents or hazardous situations in your work area without fear of repercussions from your supervisor or the University

• To file a formal complaint with IOSHA – Indiana Department of Labor Indiana

State Government Center South, Indianapolis, Indiana 46204-2287 317.232.2655

• To use the available information and to stay informed about the hazards in your work area

• To use the safety techniques and hygiene practices as a routine part of your daily activities

• To attend the training sessions conducted by your DTI

Employee Rights Employee Responsibilities

RTK TRAINING• OVERVIEW

– Hazardous Chemicals Used In This Work Area:

• are listed on the chemical inventory

• training may be done product by product or by chemical class

– Chemical classes include but is not limited to:

» acid» base» solvent

Job Specific Information

RTK TRAINING• Chemical Hazards In This Work Area:

– Solvents• defatting of the skin• eczema, severe dry and cracking skin• examples: Actone, Methanol, Toluene, Dichlorobenzene

– Acids, pH < 7• burns and blisters the skin• lung irritation if inhaled• flush skin with tepid water for 15-20 minutes• examples: Sulfuric, Nitric, Hydrochloric, Hydrofluoric, Acetic

– Bases, pH > 7• burns skin, damage area can penetrate to the bone if not neutralized • eye damage• seek medical attention• examples: Sodium Hydroxide, Tetramethylammonium Hydroxide

– Others• Cryogens• Pyrophorics• Latex

RTK TRAINING• Physical Hazards Of Products in the Work Area

– flammable– corrosive– reactive– explosive– cryogens

• Examples From This Work Area:– Acetone, Hydrogen, Silane- Hydrofluoric Acid, Buffered Oxide Etch (BOE), Nitric, Sulfuric, Hydrochloric, etc acids- Acetic acid– Liquid Nitrogen– Nitrogen gas

Second-Degree Burn From Liquid Nitrogen (LN2)

Severe Contact Allergic Dermatitis

RTK TRAININGGHS – Global Harmonization System

• What an SDS contains: – Product Name– Health Hazards– Flammability– Hazard Ratings– What to do in an emergency– What is the odor and appearance– Other information appropriate for the

work area– Exposure control and PERSONAL

PROTECTIVE EQUIPMENTSafety

Data Sheet (SDS)

• Labels– Incoming containers must be labeled by manufacturer or

distributor• Required minimum information

– Product name– Manufacturer/distributor– Address– Hazard information

– Labels must be intact and attached to the container– Prominently displayed on the container and at least written in

English– Never remove or deface labels unless container is empty– Inspect containers on a regular basis to ensure labels are

secure and still legible• If label is partially coming off, reattach with adhesive or clear

packing tape• If label is becoming illegible, use an approved University

secondary container label to re-label the container

– If you transfer a chemical to a new container, it must labeled with:

Required minimum information

–Full Chemical name

–Date

–Your name

RTK TRAININGGHS – Global Harmonization System

• NFPA Hazard Rating System– diamond divided into 4 smaller

diamonds• start at the left diamond move clockwise to

read the hazard information• may or may not be color coded• information will always be in the same location

– health– fire– reactivity– special hazard

• numbers will be 0-4– 0 = minimal hazard– 4 = severe hazard– refer to pages 41-43 of the written compliance

manual for complete definitions

• special hazard information includes oxidizer, corrosive, acid, base, etc...

Labels, Continued

0-4

0-4

0-4

RTK TRAININGGHS – Global Harmonization System

Some old familiar labelsand numbering systemswill become less used

Some new classifications, new numbering systems, and new “label elements” and labels will become what we teach and learn

MSDSs will be called SDSs Section 2 will provide Classifications Label elements▪ Pictograms▪ Signal word▪ Precautionary statement▪ Hazard statements

Danger, or Warning, or no word

Teaching and learning the meanings of the GHS: Classifications Label elements▪ Pictograms▪ Signal word▪ Precautionary statement▪ Hazard statements

P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.

H225: Highly flammable liquid and vapor.

RTK TRAINING• Control Methods

– ways to reduce exposure to chemical products

• personal protective equipment– gloves– goggles– respirators– other

• engineering– local exhaust ventilation– remote handling of materials

• administrative– limit work time – rotate work groups– break areas separate from work areas– no smoking, eating, drinking, or applying

cosmetics in work area

Effectiveness of PPE

RTK TRAINING• LOCAL

– Involves one site in the body, usually the point of contact

• Skin irritation or burns• Eye irritation or burns• Upper respiratory tract irritation

• SYSTEMIC– Involves more than one part of the body,

not just the point of contact• Central nervous system:

– headaches, dizziness, nausea, etc.• Organ damage: liver, lungs, etc.• Cancer

Star City9-1 Window Cleaner

RTK TRAINING• SUMMARY

– The written compliance manual, SDSs, and chemical inventory are located at: Cleanroom entrance, Subfab, each lab galley.

– All containers must be labeled

– Secondary labels available from DTI

– The DTIs for your work area are: Steve, Tim, Dave, Ron

– **Ask questions if you’re not sure**

BirckOrientationTraining

Successfully Completed