black and decker ps1800 case replacement · black and decker ps1800 case replacement this guide...
Post on 22-Jun-2018
218 Views
Preview:
TRANSCRIPT
Black and Decker PS1800 Case ReplacementThis guide will illustrate how to open the outer case of the Black and Decker PS1800.
Written By: Christian Aldrich
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4
INTRODUCTION
This guide will illustrate how to open the outer case of the Black and Decker PS1800.
TOOLS:Phillips #00 Screwdriver (1)
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4
Step 1 — Open the Outer Drill Case
Lay drill on its side, assuring that the drill-holes are facing upwards.
Use a Phillips-head screwdriver (#00) to remove all seven screws (12mm).
Step 2
After the screws are removed,separate the clam-shell (outer drillcase) in order to reveal the drill'sinner components.
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2018-03-23 06:25:28 AM.
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 4
top related