bone cement for vertebroplasty & kyphoplasty
Post on 26-Dec-2021
19 Views
Preview:
TRANSCRIPT
Bone Cement for Vertebroplasty & Kyphoplasty
PHYSICO-CHEMICAL COMPOSITION PMMA bone cement made of polymer powder containing HA particles and liquid monome.r
BIOCOMPATIBLE5% hydroxylapatite particles in Opacity+® provides a biocompatible surface. EASY INJECTIONThe initial low viscosity makes easier the mixing and filling of the injection system
The Opacity+® is injectable through a small gauge needle.
PHYSICO-CHEMICAL COMPOSITION PMMA bone cement made of polymer powder containing HA particles and liquid monome.r
BIOCOMPATIBLE5% hydroxylapatite particles in Opacity+® provides a biocompatible surface. EASY INJECTIONThe initial low viscosity makes easier the mixing and filling of the injection system
The Opacity+® is injectable through a small gauge needle.
Proper t ies
Specificat ion of use
Ind icat ions
The OPACITY+® is indicated for the fixation of
pathological fractures of the vertebral body using vertebroplasty or kyphoplasty procedures. Painful vertebral compression fractures of the vertebral body may result from osteoporosis, benign lesions (hemangioma), or malignant lesions (metastatic cancers, myeloma).
The viscosity of Opacity+®, specifically design for vertebroplasty offers out outstanding advantages:
The well adapted rheology allows optimal injection time giving peace of mind to the clinician.
When following the recommended application phase, the implantation of Opacity+® within its pasty phase will offer :
• A good penetration into spongious tissues without leakage
• An optimal distribution of the volume of cement into the vertebra.
The OPACITY+® is indicated for the fixation of
pathological fractures of the vertebral body using vertebroplasty or kyphoplasty procedures. Painful vertebral compression fractures of the vertebral body may result from osteoporosis, benign lesions (hemangioma), or malignant lesions (metastatic cancers, myeloma).
The viscosity of Opacity+®, specifically design for vertebroplasty offers out outstanding advantages:
The well adapted rheology allows optimal injection time giving peace of mind to the clinician.
When following the recommended application phase, the implantation of Opacity+® within its pasty phase will offer :
• A good penetration into spongious tissues without leakage
• An optimal distribution of the volume of cement into the vertebra.
OPACITY+® is a self-curing and ready to use low viscosity bone cement with a very high content of radiopaque agent for a perfect and safety visualizationIts composition has been optimized to get the most suitable handling properties for vertebroplasty & kyphoplasty.
INJECTION TIME 13MN
SYNTHETIC
HIGH RADIO-OPACITY
VISCOSITY
The Opacity+® is low viscosity, providing more homogenous bone filling with minimizing leakage potential.
RADIO OPACITYOpacity+® has an increased radiopacity agent (50%) for maximum visibility and control. Better contrast allows improved continuous real time view of the flow of cement, reducing risk of leakage. Can be used either under fluoroscopy or CT scan.
VISCOSITY
The Opacity+® is low viscosity, providing more homogenous bone filling with minimizing leakage potential.
RADIO OPACITYOpacity+® has an increased radiopacity agent (50%) for maximum visibility and control. Better contrast allows improved continuous real time view of the flow of cement, reducing risk of leakage. Can be used either under fluoroscopy or CT scan.
LOW VISCOSITY
EASY & SAFE INJECTION
Technica l data & c l in ica l cases :
SPINE
0 5 10 15 20 25 30
1000
100
10
1
Visc
osity
(Pa.
s)
Time (min.)
OSTEOPOROTIC FRACTURE AFTER VERTEBROPLASTY
The high radio-opacity offers a confortable visual control during cement application.
The viscosity of Opacity+® allows a simple filling
of bone and is recommended in all cases.
0 5 10 15 20 25 30
18
20
23
Time (min)
Tem
pera
ture
(°C)
Influence Of Temperature On HandlingTimes :: +/- 1 min
Mixing Filling and waiting Injection* hardening**
Storage
Products
T040320ZOpacity+®
DESIGNATION REFERENCE
The cement is to be stored in its original, unopened packaging, in a dry, clean place, away from light and at a temperature of 25°C max.
Each dose of Opacity+® contains two sterile components. A pouch of powder and a ampoule of liquid monomer.Single use only. For any further information, please refer to the IFU.
ADDITIONAL ITEMS APART
T060410 T060409T060406Contact us
S5 KIT EASY KITMINI-MALAX Mixing & injection systemTEKNIMED NEEDLES
Cré
dits
pho
tos
: ©
Tek
nim
ed -
TF4
3104
Z/In
d 6
- 10
2/20
20
Radiopaque Bone Cement
Distributed byDistributed by
Manufactured by
Head offices:8, rue du Corps Franc-Pommiès 65500 VIC en BIGORRE (France)Tél (33) 5 62 96 88 38Fax (33) 5 62 96 28 72
Administration and supply-chain offices:Z.I de la Herray65500 VIC en BIGORRE (France)Tél (33) 5 62 96 88 38Fax (33) 5 62 96 28 72
Sales and engineering departments:Z.I. de Montredon - 12, rue Apollo31240 L'UNION (France)Tél (33) 5 34 25 10 60 Fax (33) 5 34 25 27 39
Classe IIB
top related