bouncing kangaroo pattern - ranger rick · 3. color and cut out the kangaroo drawing. 4. tape 3...
Post on 16-Aug-2020
3 Views
Preview:
TRANSCRIPT
Bouncing Kangaroo
© 2010 RANGER RICK JR. and its logo are trademarks of the NATIONAL WILDLIFE FEDERATION. All rights reserved.
Instructions:1. Roll a piece of brown construction paper into a cone shape.2. Trim the cone so that it is about 6˝ tall, with the opening at the bo�om about 1˝ in diameter. The opening at the top should be about 5˝ in diameter.3. Color and cut out the kangaroo drawing.4. Tape 3 craft sticks together to make a stick that is about 12˝ long.5. Tape the kangaroo to the top of the stick.6. Put the stick inside the cone.7. Move the stick up and down to make the kangaroo bounce.
NATIONAL WILDLIFE FEDERATION®
top related