bsa features
Post on 28-Apr-2015
340 Views
Preview:
DESCRIPTION
TRANSCRIPT
Corporate Headquarters
TenXc Wireless™ Inc.
11 Hines Road, Suite 200
Ottawa, Ontario, Canada K2K 2X1
Email: info@tenxc.com
Technical Support: (001) 613-591-6696
Fax: (001) 613-591-6637
www.tenxc.com
Product specifications and information in this document is subject to change without notice. Contact us at info@tenxc.com or visit us at tenxc.com for more application information.
© Copyright 2011, TenXc Wireless Inc. All Rights Reserved.
TenXc Wireless, the logo, and Bi-Sector are registered trademarks of TenXc Wireless Inc. TenXc Bi-Sector Array antenna products are covered by patents granted and pending.
For CDMA and W-CDMA systems, adding carriers when spectrum is available may often seem to be the most logical way of addressing capacity hot spots.
However, as the carrier count increases, adding carriers becomes less and less effective as a way of adding capacity. Going from 1 to 2 carriers, for example, will double the DL capacity, whereas going from 2 to 3 carriers results in an increase of only 33%. Moreover, in CDMA and W-CDMA systems, soft handover mechanisms do not work between carriers on different frequencies and mobiles need to perform in compressed mode. This results in increased output power and interference levels in a cell and ultimately reduces capacity.
TenXc’s Bi-Sector Arrays provide a more elegant solution. They have been extensively deployed in CDMA and W-CDMA systems and shown to offer capacity gains in the DL of between 2 and 2.3 times capacity of a standard 3-sector deployment. The gains from the Bi-Sector Array have also been shown to be higher than even the ideal sectorization gains of 2 times—indeed, improved lined budget, interference control and optimized softer-handover losses all contribute to a greater than 2 times gain.
Sectorization with the TenXc Bi-Sector Arrays will always create more capacity than carrier addition, particularly as sectorization gains are independent of the carrier counts. Another critical advantage of Bi-sector Arrays is that they allow an operator to boost capacity by converting only those sites—or even sectors—with serious capacity constraints. By avoiding the issues of hard handover, Bi-Sector Arrays allow capacity to be deployed without a reduction in coverage.
Higher sectorization of a site may require some investment in terms of the Bi-Sector Arrays and additional feeders. For those operators willing to accept the reduction of coverage from hard handover boundaries and deploy new carriers on a sector-by-sector basis, carrier addition before sectorization may be more cost effective. However, for operators who plan to deploy new carriers as layers, and who are concerned with reducing performance impacts, sectorization offers a clear financial and performance advantage.
TenXc’s advanced antenna solutions provide operators with a proven means to significantly improve their service offering to end-users and to evolve their wireless networks efficiently and profitably.
Addressing Cellular Network Capacity:Sectorization with Bi-Sector Array or Carrier Add?
www.tenxc.com
Multi Band Bi-Sector™ Array Base Station Antenna Solution for Next Generation Wireless Applications
ENHANCED NETWORK CAPACITY
THE SHAPED BEAM ADVANTAGE
Single antenna solution, with dual asymmetric shaped beams
BI-SECTOR ARRAY™
MINIMAL WASTEDCOVERAGE
MINIMAL LOW GAIN AREA
MINIMAL OVERLAP
SECTOR 1 SECTOR 2
TX/RX TX/RX
TX/RX TX/RX
RX RX
RX RX
SECTOR 3 SECTOR 4
LTE eNB700 MHz
UTMS Node-B1900 MHz
TX/RX
In our ongoing pursuit of innovative antenna solutions to address the exponential growth in cellular capacity demand, TenXc has developed the industry-first Multi Band Bi-Sector Array antenna.
With patented phase-array architecture, the Multi Band Bi-Sector Array fully supports multi-technology and multi-frequency band wireless networks. This interspersed-elements design delivers outstanding performance, reliability and customer value.
TenXc Bi-Sector Array Advantages
• Innovative technology significantly boosts cellular capacity
• Fully compatible with existing LTE, WIMAX, UMTS/HSPA+, EVDO, IDEN, GSM radio equipment
• Quick and simple installation
• Cost-effective alternative to Multiple Carrier Adds
• Supports gradual 4, 5 or 6 sector conversions
• Reduces “other cell” interference and dropped calls
• Provides perfect balance between efficiency and performance
TenXc BI-SECTOR™ ARRAY FEATURES
The Multi Band Bi-Sector Array is a second-generation product, evolving from TenXc’s industry proven Dual Band Bi-Sector Array technology.
The features of this advanced technology include:
• Asymmetrical dual beams optimized to match existing cloverleaf (65°) patterns.
• Dual cross-polarization (±45°) for Left and Right beams optimizes performance.
• Independent adjustable sub-beams provide unmatched optimization flexibility.
• Rugged, weather resistant architecture and highly reliable internal design.
• Single panel design which offers the opportunity to reduce antenna count and avoids costly leasing and zoning changes.
MULTI BAND BI-SECTOR ARRAYFREQUENCY BANDS SUPPORTED
AWS1755 2110 21551710
DCS 18001785 1805 18801710
PCS 19001910 1930 19901850
UMTS1980 2110 21701920
2170 MHz1710 MHz
700 MHz745 745 794698
Cellular 850849 869 894824
SMR 800 MHz824 852 869806
800 MHz
894 MHz698 MHz
820 832 862790
Mechanical Specifications Dimensions (LxWxD) 1828 x 726 x 240 mm (72.0 x 28.6 x 9.4 inches)
Survival Wind Speed > 193 km/hr (> 120 mph)
Front Wind Load 1953 N (439 lbs) @ 161 kph (100 mph)
Side Wind Load 764 N (172 lbs) @ 161 kph (100 mph)
Equivalent Flat Plate Area 1.6 m2 (17.0 ft2 )
Weight (without Mounting) 39 kg (86.0 lbs)
Connector 8 connectors; 7-16 DIN female
Mounting Pole 5 – 12cm (2-5 inches)
RET (Remote Electrical Tilt) AISG 2.0
BSA-M65 Bi-Sector™ Array
Electrical Specifications Frequency Range 698-824 MHz 824-894 MHz 1710-1920 MHz 1920–2170 MHz
Azimuth Beamwidth (-3dB) 34° Asymmetric 30° Asymmetric 33° Asymmetric 30° Asymmetric
Elevation Beamwidth (-3dB) 11.5° 11.0° 6.0° 5.5°
Elevation Sidelobes (1st Upper) < -17dB < -17dB < -17dB < -17dB
Gain 16 dBi (13.85dBd) 17 dBi (14.85dBd) 18 dBi (15.75dBd) 19 dBi (16.75dBd)
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
VSWR < 1.5:1 <1.5:1 <1.5:1 <1.5:1
Front-to-Back Ratio @ 180° > 27dB > 27dB > 30dB > 30dB
Isolation1 > 30dB > 30dB > 30dB > 30dB
Electrical Downtilt 0° to 10° 0° to 10° 0° to 8° 0° to 8°
Input Impedance 50 Ohms 50 Ohms 50 Ohms 50 Ohms
Input Power >250Watts CW >250Watts CW >250Watts CW >250Watts CW
Passive Intermodulation (2x20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Lightning Protection DC Ground DC Ground DC Ground DC Ground
1. Cross-Polar Port-to-Port Isolation
Technology Agnostic Multi Band Bi-Sector™ Array:Anticipating and Addressing Customer Needs
Industry-First Multi-Beam Split-Sector Antenna covering both the 700 MHz and AWS Bands
Expand Your Cellular Network Capacity for Next Generation Wireless Services with TenXc’s New Multi Band Bi-Sector™ Array
MULTI BAND BI-SECTOR™ ARRAYANTENNA CONFIGURATIONS
MULTI BAND BI-SECTOR™ ARRAY FEATURES
• Industry-first Multi-Beam Split-Sector antenna covering both the 700 MHz and AWS bands.
• Provides functionality equivalent to 4 antennas.
• Supports multiple wireless technologies, including LTE, UMTS/HSPA+, IDEN, WIMAX, EVDO, GSM across multiple frequency bands: 700 MHz, SMR 800 MHz, Cellular 850 MHz, PCS 1900 MHz, AWS 1710/2100 MHz.
• Enables efficient evolution of wireless networks.
• M x N interspersed-element design delivers compact size and superior performance across the entire frequency range.
° Low Elevation Sidelobes (1st Upper) minimizes inter sector interference.
° Optimal Gain to Height Ratio ensures maximum coverage in a 1.8m (6ft) package.
° Improved Front-to-Back ratio and Isolation across the operating frequency range.
• Slim and low weight single panel supporting four beams without mount changes.
• 8 separate Low-band and High-band connection ports, Left and Right beams, support 4 sub-sectors.
• Supports simultaneous Multi Band applications with external diplexers.
• Available with variable and remote electrical tilt capability options.
Applications• Upgrade of data-throughput or capacity-constrained sites
• Spectrum-limited markets
• CDMA or W-CDMA carrier add deferrals
• Spectrum clearing and re-farming
• Multi Band applications with external diplexers
TenXc Quality With thousands of Bi-Sector™ arrays deployed worldwide, TenXc continues to revolutionize wireless access networks with robust and highly efficient antenna products and solutions. Over the past five years since our innovative products were first commercialized, there have been no field returns due to performance, quality or reliability concerns. Any installation issues are quickly resolved in the field by our dedicated team of highly qualified professionals.
All TenXc antenna products are manufactured under ISO 14000 and undergo a series of rigorous quality inspection processes in order to ensure unsurpassed reliability and performance. As an ISO 9001:2008 and RoHS-compliant organization, we are dedicated to quality assurance activities and continual system improvements.
Our principal objectives at TenXc are to anticipate and address customer needs and expectations and to enhance our market position through technology leadership and operational excellence.
www.tenxc.com
The robust TenXc RET system is AISG 2.0 compliant, factory installed and pre-configured, and interoperable with multiple base stations and portable controllers.
With thousands of Bi-Sector™
arrays deployed worldwide,TenXc continues to revolutionizewireless access networks withrobust and highly efficientantenna products and solutions.
L+ L-HIGH BAND LOW BAND
R+ R- L+ L- R+ R-
MULTI BAND BI-SECTOR ARRAY(REAR VIEW)
MULTI BAND CONFIGURATION
L+ L-HIGH BAND LOW BAND
R+ R- L+ L- R+ R-
DUAL BAND CONFIGURATION
Ordering InformationProduct Codes Description
BSA-M65-19R010-02 Multi Band Bi-Sector Array with factory installed RET System
BSA-M65-19V010-02 Multi Band Bi-Sector Array with Variable Electrical Tilt
BSA-M02 Mounting bracket for use on M65 antennas with 0 to 10 degree DT
TX/RXRX
DIPLEXER DIPLEXER
TX/RXRX
DIPLEXERDIPLEXER DIPLEXERDIPLEXERDIPLEXER DIPLEXER
SECTOR 3 SECTOR 4
UTMS Node-B1900 MHz
SECTOR 1 SECTOR 2
LTE eNB2170 MHz
RXTX/RX
RX
SECTOR 5 SECTOR 6
GSM BTS850 MHz
SECTOR 7 SECTOR 8
LTE eNB700 MHz
MULTI BAND BI-SECTOR ARRAY(REAR VIEW)
SECTOR 1 SECTOR 2
TX/RX TX/RX
TX/RX TX/RX
RX RX
RX RX
SECTOR 3 SECTOR 4
LTE eNB700 MHz
UTMS Node-B1900 MHz
TX/RX
In our ongoing pursuit of innovative antenna solutions to address the exponential growth in cellular capacity demand, TenXc has developed the industry-first Multi Band Bi-Sector Array antenna.
With patented phase-array architecture, the Multi Band Bi-Sector Array fully supports multi-technology and multi-frequency band wireless networks. This interspersed-elements design delivers outstanding performance, reliability and customer value.
TenXc Bi-Sector Array Advantages
• Innovative technology significantly boosts cellular capacity
• Fully compatible with existing LTE, WIMAX, UMTS/HSPA+, EVDO, IDEN, GSM radio equipment
• Quick and simple installation
• Cost-effective alternative to Multiple Carrier Adds
• Supports gradual 4, 5 or 6 sector conversions
• Reduces “other cell” interference and dropped calls
• Provides perfect balance between efficiency and performance
TenXc BI-SECTOR™ ARRAY FEATURES
The Multi Band Bi-Sector Array is a second-generation product, evolving from TenXc’s industry proven Dual Band Bi-Sector Array technology.
The features of this advanced technology include:
• Asymmetrical dual beams optimized to match existing cloverleaf (65°) patterns.
• Dual cross-polarization (±45°) for Left and Right beams optimizes performance.
• Independent adjustable sub-beams provide unmatched optimization flexibility.
• Rugged, weather resistant architecture and highly reliable internal design.
• Single panel design which offers the opportunity to reduce antenna count and avoids costly leasing and zoning changes.
MULTI BAND BI-SECTOR ARRAYFREQUENCY BANDS SUPPORTED
AWS1755 2110 21551710
DCS 18001785 1805 18801710
PCS 19001910 1930 19901850
UMTS1980 2110 21701920
2170 MHz1710 MHz
700 MHz745 745 794698
Cellular 850849 869 894824
SMR 800 MHz824 852 869806
800 MHz
894 MHz698 MHz
820 832 862790
Mechanical Specifications Dimensions (LxWxD) 1828 x 726 x 240 mm (72.0 x 28.6 x 9.4 inches)
Survival Wind Speed > 193 km/hr (> 120 mph)
Front Wind Load 1953 N (439 lbs) @ 161 kph (100 mph)
Side Wind Load 764 N (172 lbs) @ 161 kph (100 mph)
Equivalent Flat Plate Area 1.6 m2 (17.0 ft2 )
Weight (without Mounting) 39 kg (86.0 lbs)
Connector 8 connectors; 7-16 DIN female
Mounting Pole 5 – 12cm (2-5 inches)
RET (Remote Electrical Tilt) AISG 2.0
BSA-M65 Bi-Sector™ Array
Electrical Specifications Frequency Range 698-824 MHz 824-894 MHz 1710-1920 MHz 1920–2170 MHz
Azimuth Beamwidth (-3dB) 34° Asymmetric 30° Asymmetric 33° Asymmetric 30° Asymmetric
Elevation Beamwidth (-3dB) 11.5° 11.0° 6.0° 5.5°
Elevation Sidelobes (1st Upper) < -17dB < -17dB < -17dB < -17dB
Gain 16 dBi (13.85dBd) 17 dBi (14.85dBd) 18 dBi (15.75dBd) 19 dBi (16.75dBd)
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
VSWR < 1.5:1 <1.5:1 <1.5:1 <1.5:1
Front-to-Back Ratio @ 180° > 27dB > 27dB > 30dB > 30dB
Isolation1 > 30dB > 30dB > 30dB > 30dB
Electrical Downtilt 0° to 10° 0° to 10° 0° to 8° 0° to 8°
Input Impedance 50 Ohms 50 Ohms 50 Ohms 50 Ohms
Input Power >250Watts CW >250Watts CW >250Watts CW >250Watts CW
Passive Intermodulation (2x20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Lightning Protection DC Ground DC Ground DC Ground DC Ground
1. Cross-Polar Port-to-Port Isolation
Technology Agnostic Multi Band Bi-Sector™ Array:Anticipating and Addressing Customer Needs
Industry-First Multi-Beam Split-Sector Antenna covering both the 700 MHz and AWS Bands
Expand Your Cellular Network Capacity for Next Generation Wireless Services with TenXc’s New Multi Band Bi-Sector™ Array
MULTI BAND BI-SECTOR™ ARRAYANTENNA CONFIGURATIONS
MULTI BAND BI-SECTOR™ ARRAY FEATURES
• Industry-first Multi-Beam Split-Sector antenna covering both the 700 MHz and AWS bands.
• Provides functionality equivalent to 4 antennas.
• Supports multiple wireless technologies, including LTE, UMTS/HSPA+, IDEN, WIMAX, EVDO, GSM across multiple frequency bands: 700 MHz, SMR 800 MHz, Cellular 850 MHz, PCS 1900 MHz, AWS 1710/2100 MHz.
• Enables efficient evolution of wireless networks.
• M x N interspersed-element design delivers compact size and superior performance across the entire frequency range.
° Low Elevation Sidelobes (1st Upper) minimizes inter sector interference.
° Optimal Gain to Height Ratio ensures maximum coverage in a 1.8m (6ft) package.
° Improved Front-to-Back ratio and Isolation across the operating frequency range.
• Slim and low weight single panel supporting four beams without mount changes.
• 8 separate Low-band and High-band connection ports, Left and Right beams, support 4 sub-sectors.
• Supports simultaneous Multi Band applications with external diplexers.
• Available with variable and remote electrical tilt capability options.
Applications• Upgrade of data-throughput or capacity-constrained sites
• Spectrum-limited markets
• CDMA or W-CDMA carrier add deferrals
• Spectrum clearing and re-farming
• Multi Band applications with external diplexers
TenXc Quality With thousands of Bi-Sector™ arrays deployed worldwide, TenXc continues to revolutionize wireless access networks with robust and highly efficient antenna products and solutions. Over the past five years since our innovative products were first commercialized, there have been no field returns due to performance, quality or reliability concerns. Any installation issues are quickly resolved in the field by our dedicated team of highly qualified professionals.
All TenXc antenna products are manufactured under ISO 14000 and undergo a series of rigorous quality inspection processes in order to ensure unsurpassed reliability and performance. As an ISO 9001:2008 and RoHS-compliant organization, we are dedicated to quality assurance activities and continual system improvements.
Our principal objectives at TenXc are to anticipate and address customer needs and expectations and to enhance our market position through technology leadership and operational excellence.
www.tenxc.com
The robust TenXc RET system is AISG 2.0 compliant, factory installed and pre-configured, and interoperable with multiple base stations and portable controllers.
With thousands of Bi-Sector™
arrays deployed worldwide,TenXc continues to revolutionizewireless access networks withrobust and highly efficientantenna products and solutions.
L+ L-HIGH BAND LOW BAND
R+ R- L+ L- R+ R-
MULTI BAND BI-SECTOR ARRAY(REAR VIEW)
MULTI BAND CONFIGURATION
L+ L-HIGH BAND LOW BAND
R+ R- L+ L- R+ R-
DUAL BAND CONFIGURATION
Ordering InformationProduct Codes Description
BSA-M65-19R010-02 Multi Band Bi-Sector Array with factory installed RET System
BSA-M65-19V010-02 Multi Band Bi-Sector Array with Variable Electrical Tilt
BSA-M02 Mounting bracket for use on M65 antennas with 0 to 10 degree DT
TX/RXRX
DIPLEXER DIPLEXER
TX/RXRX
DIPLEXERDIPLEXER DIPLEXERDIPLEXERDIPLEXER DIPLEXER
SECTOR 3 SECTOR 4
UTMS Node-B1900 MHz
SECTOR 1 SECTOR 2
LTE eNB2170 MHz
RXTX/RX
RX
SECTOR 5 SECTOR 6
GSM BTS850 MHz
SECTOR 7 SECTOR 8
LTE eNB700 MHz
MULTI BAND BI-SECTOR ARRAY(REAR VIEW)
SECTOR 1 SECTOR 2
TX/RX TX/RX
TX/RX TX/RX
RX RX
RX RX
SECTOR 3 SECTOR 4
LTE eNB700 MHz
UTMS Node-B1900 MHz
TX/RX
In our ongoing pursuit of innovative antenna solutions to address the exponential growth in cellular capacity demand, TenXc has developed the industry-first Multi Band Bi-Sector Array antenna.
With patented phase-array architecture, the Multi Band Bi-Sector Array fully supports multi-technology and multi-frequency band wireless networks. This interspersed-elements design delivers outstanding performance, reliability and customer value.
TenXc Bi-Sector Array Advantages
• Innovative technology significantly boosts cellular capacity
• Fully compatible with existing LTE, WIMAX, UMTS/HSPA+, EVDO, IDEN, GSM radio equipment
• Quick and simple installation
• Cost-effective alternative to Multiple Carrier Adds
• Supports gradual 4, 5 or 6 sector conversions
• Reduces “other cell” interference and dropped calls
• Provides perfect balance between efficiency and performance
TenXc BI-SECTOR™ ARRAY FEATURES
The Multi Band Bi-Sector Array is a second-generation product, evolving from TenXc’s industry proven Dual Band Bi-Sector Array technology.
The features of this advanced technology include:
• Asymmetrical dual beams optimized to match existing cloverleaf (65°) patterns.
• Dual cross-polarization (±45°) for Left and Right beams optimizes performance.
• Independent adjustable sub-beams provide unmatched optimization flexibility.
• Rugged, weather resistant architecture and highly reliable internal design.
• Single panel design which offers the opportunity to reduce antenna count and avoids costly leasing and zoning changes.
MULTI BAND BI-SECTOR ARRAYFREQUENCY BANDS SUPPORTED
AWS1755 2110 21551710
DCS 18001785 1805 18801710
PCS 19001910 1930 19901850
UMTS1980 2110 21701920
2170 MHz1710 MHz
700 MHz745 745 794698
Cellular 850849 869 894824
SMR 800 MHz824 852 869806
800 MHz
894 MHz698 MHz
820 832 862790
Mechanical Specifications Dimensions (LxWxD) 1828 x 726 x 240 mm (72.0 x 28.6 x 9.4 inches)
Survival Wind Speed > 193 km/hr (> 120 mph)
Front Wind Load 1953 N (439 lbs) @ 161 kph (100 mph)
Side Wind Load 764 N (172 lbs) @ 161 kph (100 mph)
Equivalent Flat Plate Area 1.6 m2 (17.0 ft2 )
Weight (without Mounting) 39 kg (86.0 lbs)
Connector 8 connectors; 7-16 DIN female
Mounting Pole 5 – 12cm (2-5 inches)
RET (Remote Electrical Tilt) AISG 2.0
BSA-M65 Bi-Sector™ Array
Electrical Specifications Frequency Range 698-824 MHz 824-894 MHz 1710-1920 MHz 1920–2170 MHz
Azimuth Beamwidth (-3dB) 34° Asymmetric 30° Asymmetric 33° Asymmetric 30° Asymmetric
Elevation Beamwidth (-3dB) 11.5° 11.0° 6.0° 5.5°
Elevation Sidelobes (1st Upper) < -17dB < -17dB < -17dB < -17dB
Gain 16 dBi (13.85dBd) 17 dBi (14.85dBd) 18 dBi (15.75dBd) 19 dBi (16.75dBd)
Polarization Dual Linear 45° Dual Linear 45° Dual Linear 45° Dual Linear 45°
VSWR < 1.5:1 <1.5:1 <1.5:1 <1.5:1
Front-to-Back Ratio @ 180° > 27dB > 27dB > 30dB > 30dB
Isolation1 > 30dB > 30dB > 30dB > 30dB
Electrical Downtilt 0° to 10° 0° to 10° 0° to 8° 0° to 8°
Input Impedance 50 Ohms 50 Ohms 50 Ohms 50 Ohms
Input Power >250Watts CW >250Watts CW >250Watts CW >250Watts CW
Passive Intermodulation (2x20W) ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc ≤ -150 dBc
Lightning Protection DC Ground DC Ground DC Ground DC Ground
1. Cross-Polar Port-to-Port Isolation
Technology Agnostic Multi Band Bi-Sector™ Array:Anticipating and Addressing Customer Needs
Industry-First Multi-Beam Split-Sector Antenna covering both the 700 MHz and AWS Bands
Expand Your Cellular Network Capacity for Next Generation Wireless Services with TenXc’s New Multi Band Bi-Sector™ Array
MULTI BAND BI-SECTOR™ ARRAYANTENNA CONFIGURATIONS
MULTI BAND BI-SECTOR™ ARRAY FEATURES
• Industry-first Multi-Beam Split-Sector antenna covering both the 700 MHz and AWS bands.
• Provides functionality equivalent to 4 antennas.
• Supports multiple wireless technologies, including LTE, UMTS/HSPA+, IDEN, WIMAX, EVDO, GSM across multiple frequency bands: 700 MHz, SMR 800 MHz, Cellular 850 MHz, PCS 1900 MHz, AWS 1710/2100 MHz.
• Enables efficient evolution of wireless networks.
• M x N interspersed-element design delivers compact size and superior performance across the entire frequency range.
° Low Elevation Sidelobes (1st Upper) minimizes inter sector interference.
° Optimal Gain to Height Ratio ensures maximum coverage in a 1.8m (6ft) package.
° Improved Front-to-Back ratio and Isolation across the operating frequency range.
• Slim and low weight single panel supporting four beams without mount changes.
• 8 separate Low-band and High-band connection ports, Left and Right beams, support 4 sub-sectors.
• Supports simultaneous Multi Band applications with external diplexers.
• Available with variable and remote electrical tilt capability options.
Applications• Upgrade of data-throughput or capacity-constrained sites
• Spectrum-limited markets
• CDMA or W-CDMA carrier add deferrals
• Spectrum clearing and re-farming
• Multi Band applications with external diplexers
TenXc Quality With thousands of Bi-Sector™ arrays deployed worldwide, TenXc continues to revolutionize wireless access networks with robust and highly efficient antenna products and solutions. Over the past five years since our innovative products were first commercialized, there have been no field returns due to performance, quality or reliability concerns. Any installation issues are quickly resolved in the field by our dedicated team of highly qualified professionals.
All TenXc antenna products are manufactured under ISO 14000 and undergo a series of rigorous quality inspection processes in order to ensure unsurpassed reliability and performance. As an ISO 9001:2008 and RoHS-compliant organization, we are dedicated to quality assurance activities and continual system improvements.
Our principal objectives at TenXc are to anticipate and address customer needs and expectations and to enhance our market position through technology leadership and operational excellence.
www.tenxc.com
The robust TenXc RET system is AISG 2.0 compliant, factory installed and pre-configured, and interoperable with multiple base stations and portable controllers.
With thousands of Bi-Sector™
arrays deployed worldwide,TenXc continues to revolutionizewireless access networks withrobust and highly efficientantenna products and solutions.
L+ L-HIGH BAND LOW BAND
R+ R- L+ L- R+ R-
MULTI BAND BI-SECTOR ARRAY(REAR VIEW)
MULTI BAND CONFIGURATION
L+ L-HIGH BAND LOW BAND
R+ R- L+ L- R+ R-
DUAL BAND CONFIGURATION
Ordering InformationProduct Codes Description
BSA-M65-19R010-02 Multi Band Bi-Sector Array with factory installed RET System
BSA-M65-19V010-02 Multi Band Bi-Sector Array with Variable Electrical Tilt
BSA-M02 Mounting bracket for use on M65 antennas with 0 to 10 degree DT
TX/RXRX
DIPLEXER DIPLEXER
TX/RXRX
DIPLEXERDIPLEXER DIPLEXERDIPLEXERDIPLEXER DIPLEXER
SECTOR 3 SECTOR 4
UTMS Node-B1900 MHz
SECTOR 1 SECTOR 2
LTE eNB2170 MHz
RXTX/RX
RX
SECTOR 5 SECTOR 6
GSM BTS850 MHz
SECTOR 7 SECTOR 8
LTE eNB700 MHz
MULTI BAND BI-SECTOR ARRAY(REAR VIEW)
Corporate Headquarters
TenXc Wireless™ Inc.
11 Hines Road, Suite 200
Ottawa, Ontario, Canada K2K 2X1
Email: info@tenxc.com
Technical Support: (001) 613-591-6696
Fax: (001) 613-591-6637
www.tenxc.com
Product specifications and information in this document is subject to change without notice. Contact us at info@tenxc.com or visit us at tenxc.com for more application information.
© Copyright 2011, TenXc Wireless Inc. All Rights Reserved.
TenXc Wireless, the logo, and Bi-Sector are registered trademarks of TenXc Wireless Inc. TenXc Bi-Sector Array antenna products are covered by patents granted and pending.
For CDMA and W-CDMA systems, adding carriers when spectrum is available may often seem to be the most logical way of addressing capacity hot spots.
However, as the carrier count increases, adding carriers becomes less and less effective as a way of adding capacity. Going from 1 to 2 carriers, for example, will double the DL capacity, whereas going from 2 to 3 carriers results in an increase of only 33%. Moreover, in CDMA and W-CDMA systems, soft handover mechanisms do not work between carriers on different frequencies and mobiles need to perform in compressed mode. This results in increased output power and interference levels in a cell and ultimately reduces capacity.
TenXc’s Bi-Sector Arrays provide a more elegant solution. They have been extensively deployed in CDMA and W-CDMA systems and shown to offer capacity gains in the DL of between 2 and 2.3 times capacity of a standard 3-sector deployment. The gains from the Bi-Sector Array have also been shown to be higher than even the ideal sectorization gains of 2 times—indeed, improved lined budget, interference control and optimized softer-handover losses all contribute to a greater than 2 times gain.
Sectorization with the TenXc Bi-Sector Arrays will always create more capacity than carrier addition, particularly as sectorization gains are independent of the carrier counts. Another critical advantage of Bi-sector Arrays is that they allow an operator to boost capacity by converting only those sites—or even sectors—with serious capacity constraints. By avoiding the issues of hard handover, Bi-Sector Arrays allow capacity to be deployed without a reduction in coverage.
Higher sectorization of a site may require some investment in terms of the Bi-Sector Arrays and additional feeders. For those operators willing to accept the reduction of coverage from hard handover boundaries and deploy new carriers on a sector-by-sector basis, carrier addition before sectorization may be more cost effective. However, for operators who plan to deploy new carriers as layers, and who are concerned with reducing performance impacts, sectorization offers a clear financial and performance advantage.
TenXc’s advanced antenna solutions provide operators with a proven means to significantly improve their service offering to end-users and to evolve their wireless networks efficiently and profitably.
Addressing Cellular Network Capacity:Sectorization with Bi-Sector Array or Carrier Add?
www.tenxc.com
Multi Band Bi-Sector™ Array Base Station Antenna Solution for Next Generation Wireless Applications
ENHANCED NETWORK CAPACITY
THE SHAPED BEAM ADVANTAGE
Single antenna solution, with dual asymmetric shaped beams
BI-SECTOR ARRAY™
MINIMAL WASTEDCOVERAGE
MINIMAL LOW GAIN AREA
MINIMAL OVERLAP
Corporate Headquarters
TenXc Wireless™ Inc.
11 Hines Road, Suite 200
Ottawa, Ontario, Canada K2K 2X1
Email: info@tenxc.com
Technical Support: (001) 613-591-6696
Fax: (001) 613-591-6637
www.tenxc.com
Product specifications and information in this document is subject to change without notice. Contact us at info@tenxc.com or visit us at tenxc.com for more application information.
© Copyright 2011, TenXc Wireless Inc. All Rights Reserved.
TenXc Wireless, the logo, and Bi-Sector are registered trademarks of TenXc Wireless Inc. TenXc Bi-Sector Array antenna products are covered by patents granted and pending.
For CDMA and W-CDMA systems, adding carriers when spectrum is available may often seem to be the most logical way of addressing capacity hot spots.
However, as the carrier count increases, adding carriers becomes less and less effective as a way of adding capacity. Going from 1 to 2 carriers, for example, will double the DL capacity, whereas going from 2 to 3 carriers results in an increase of only 33%. Moreover, in CDMA and W-CDMA systems, soft handover mechanisms do not work between carriers on different frequencies and mobiles need to perform in compressed mode. This results in increased output power and interference levels in a cell and ultimately reduces capacity.
TenXc’s Bi-Sector Arrays provide a more elegant solution. They have been extensively deployed in CDMA and W-CDMA systems and shown to offer capacity gains in the DL of between 2 and 2.3 times capacity of a standard 3-sector deployment. The gains from the Bi-Sector Array have also been shown to be higher than even the ideal sectorization gains of 2 times—indeed, improved lined budget, interference control and optimized softer-handover losses all contribute to a greater than 2 times gain.
Sectorization with the TenXc Bi-Sector Arrays will always create more capacity than carrier addition, particularly as sectorization gains are independent of the carrier counts. Another critical advantage of Bi-sector Arrays is that they allow an operator to boost capacity by converting only those sites—or even sectors—with serious capacity constraints. By avoiding the issues of hard handover, Bi-Sector Arrays allow capacity to be deployed without a reduction in coverage.
Higher sectorization of a site may require some investment in terms of the Bi-Sector Arrays and additional feeders. For those operators willing to accept the reduction of coverage from hard handover boundaries and deploy new carriers on a sector-by-sector basis, carrier addition before sectorization may be more cost effective. However, for operators who plan to deploy new carriers as layers, and who are concerned with reducing performance impacts, sectorization offers a clear financial and performance advantage.
TenXc’s advanced antenna solutions provide operators with a proven means to significantly improve their service offering to end-users and to evolve their wireless networks efficiently and profitably.
Addressing Cellular Network Capacity:Sectorization with Bi-Sector Array or Carrier Add?
www.tenxc.com
Multi Band Bi-Sector™ Array Base Station Antenna Solution for Next Generation Wireless Applications
ENHANCED NETWORK CAPACITY
THE SHAPED BEAM ADVANTAGE
Single antenna solution, with dual asymmetric shaped beams
BI-SECTOR ARRAY™
MINIMAL WASTEDCOVERAGE
MINIMAL LOW GAIN AREA
MINIMAL OVERLAP
top related