build the best dueling lightsaber
Post on 16-Feb-2015
233 Views
Preview:
TRANSCRIPT
Building the best lightsaber for combat
is ultimately a subjective experience
due to preferences in length, weight,
and the feel of the saber in your hands.
While the style, color, and sound
increase a lightsaber’s aesthetic appeal,
dueling is primarily a function of the
hilt, and its feel and maneuverability in
the hand. A combat-ready saber should
always be paired with a heavy grade
dueling blade. The following presents
various hilts that when paired with a
selection of blade colors and sounds
will create the best dueling lightsaber.
The Dark Prophecy v3 is a stunt saber made
from aircraft grade aluminum and comes
with a full sized blade, brass retainers,
removable pommel, and a custom machined
aluminum covertec wheel specifically crafted
for this saber. Tactile feedback and control
were primary considerations when designing
the grips. The switch is recessed into the hilt
for optimum performance and durability.
Specs: 11” in length, 1.45” maximum width
Sound capable: Yes
Like every Ultra Saber, the Overlord is ready for
combat. It is made from aircraft grade aluminum
and can handle rigorous use over and over again.
With its low profile removable knurled pommel
and removable emitter, this saber is sleek. It has
a lack of decorative buttons, which is beneficial
in that nothing gets in the way for dueling. As a
stylistic feature, there are windows in the
emitter to give the saber a unique accent when
the blade is illuminated.
This saber is also available in an RGB version,
which allows for 7 different colors in one hilt.
Specs: Standard 12 ¼” in length
Sound capable: Yes
Specs: RGB 13 ½” in length
Sound capable: Yes
The Manticore is one of the most
streamlined sabers and is made from
aircraft grade aluminum. It has a
pronounced flanged emitter with windows
that let light shine through, along with an
aesthetically pleasing groove pattern on
the grips. It is a durable, three-piece
design that will stand rigorous use over
time and is considered ideal for both one
and two-handed combat.
Specs: 11” in length
(12” - high profile pommel)
Sound capable: Yes
The Graflex CE is the Original Lightsaber design and a classic favorite. It has great grip,
a covertec wheel, a removable pommel, and a switch activation box to the electrical
pins. It will not only make for an excellent collectible piece, but it is also sturdy enough
for dueling. You’ll be ready for combat right out of the box as this saber comes
completely assembled.
Specs: 11.125” in length,
1.55” maximum width
Sound capable: Yes
The Archon v2.1 is a combat-ready
saber that is built with high quality
aircraft aluminum. It is a durable, five-
piece design with a highly pronounced
flanged emitter with a classic skinny
neck. There are deep groove patterns
on the grips, and the pommel is wide
with deep landings, which makes for a
sturdy feel in the hand.
Specs: 12” in length (12.375” including the neck)
Sound capable: Yes
The Dark Liberator battle saber has a
unique and elegant appeal. This well-
balanced saber is both lightweight and
durable. The pommel gives it balance
because it is counter-weighted to bring
the balance towards the hilt. The hilt is
concaved in the middle to increase
comfort when holding the saber.
Specs: 11.625” in length, 1.42”
maximum width
Sound capable: Yes
The Dominix LE v3 has two
choke points on the hilt to
make it great for both one
and two-handed combat. It
can be used as a main hand
or off hand weapon. The
ability to remove the
pommel is new to this
version of the Dominix.
Specs: 12.25” in length, 1.45” maximum width
Sound capable: Yes
Ultrasabers offers the finest selection of custom lightsabers.
A high quality standard is applied to all sabers and each
design is tested multiple times before production to ensure
that each piece is crafted perfectly. Ultrasabers offers a
warranty for peace of mind in the rare case of a defect.
Website: http://www.ultrasabers.com/
Phone: (408) 644-2910
Sources
http://www.ultrasabers.com/product-p/stunt-darkprophecy-v3.htm http://www.ultrasabers.com/product-p/stunt-overlord.htm http://www.ultrasabers.com/product-p/stunt-manticore.htm http://www.ultrasabers.com/product-p/stunt-graflexce.htm http://www.ultrasabers.com/product-p/stunt-archon.htm http://www.ultrasabers.com/Dark-Liberator-v3-p/stunt-darkliberatorv3.htm http://www.ultrasabers.com/product-p/stunt-dominixv3le.htm
Summary
Not all lightsabers are crafted for use in a duel. While there are many considerations to take in building a dueling saber, the hilt is the base from which to build upon, along with a heavy grade blade. From there, any number of styles, blade colors, and sound can be added to finalize the full effect of the saber.
top related