c-tec product catalog
Post on 02-Apr-2018
220 Views
Preview:
TRANSCRIPT
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 1/49
Corporate Ofce PH: 866-622-CTEC(2832)
Chicago, Illinois www.c-tecinc.comINDUSTRIES, INC.
Waste Management Systems & Service
TEC
C-TEC Industries, INC.
Product Catalog
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 2/49
Table of Contents
Mission Statement.......................................................................................2
Compactors..............................................................................................3-8
Chutes and Chute Doors.......................................................................9-10
Balers....................................................................................................11-15
Odor Control Systems..........................................................................17-19
Containers............................................................................................21-28
Lifts.......................................................................................................29-33
2-Wheel Carts.......................................................................................35-38
Waste Watchers.....................................................................................39-41
Service & Repair..................................................................................43-44
Preventative Maintenance...................................................................45-46
Warranty....................................................................................................47
Purchasing................................................................................................48
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 3/49
“To provide the highest quality service and repair to waste equipment offering exceptional benets that extends the lifecycle of waste equipment
and reduces unnecessary repair and maintenance costs. Our company
and our people are rewarded for superior performance and continuous
improvement. We conduct our business ethically within an atmosphere of
trust and respect for one another and our environment.”
By combining superior products with unsurpassed service
Fostering continuous improvement and Total Quality Management
Providing education and information related to the benets of preventative maintenance and
safety
Providing industry information, product training, and education
To continually identify Service to our Customer as the fundamental reason for our existence
Providing the Highest Quality/Best Value to our Customers
By continuously maintaining high growth and fair prots and sustaining the expectations of our
Customers and Employees and Shareholders.
C-Tec Industries was founded on the basic principle of doing “right things right”. Our organizationbelieves that companies can dramatically reduce unnecessary waste equipment service costsin addition to prolonging the life of their existing equipment and potentially reducing the risk of personal employee injury by properly maintaining their waste equipment.
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 4/49
UL Listed
Apartment Compactor
C-TEC’s apartment compactors gives
big service in a small area. Available for chute or ground loading and packs into afront load or rear load receiver container.Requires less than 12.5’ in length for bothcompactor and container. UL approvedand ANSI compliant.
COMPACTOR SPECIFICATIONS CONTAINER SPECIFICATIONS
MFG Rating CU/YDWastec Rating CU/YDClear Top Opening (L” x W”)Ram Face (H’ x W’)Ground heightCapacity per Hour
PERFORMANCE
Cycle Time (Seconds)
Normal Force lbs.Maximum Force lbs.Normal Ram face Pressure PSIMaximum Ram Face Pressure PSIRam Penetration
HYDRAULIC / ELECTRICAL
Motor HPControl VoltagePump GPMNormal System Pressure PSIMaximum System Pressure PSICylinder Bore / Rod DiameterStrokeSingle Cylinder
Hydraulic Tank-Capacity gallons
CONSTRUCTION
Charge Box SidesExterior Vertical / Horizontal Formed VCharge Box FloorRam FaceRam BottomRam TopBreaker Bar Structural angleWeightOther
Overall LengthOverall WidthOverall HeightCapacityWeightSidesFloorLidsPockets
Trunnion BarPocket HeightTrunnion Bar HeightTrunnion Bar Length
Swivel Casters
Rigid Casters
Charge Door Opening
0.390.3321” x 31 1/8”19 7/8’ x 30 7/8’8”70
15
14.43216.90624.128.26”
5120 VAC5.21,7002,0004” / 2”24”Yes
7
1/4”No3/8”1/2”1/4”1/4”3.5” x 3.5” x 1/2”1,400Double Side Release
Rear Load 77 1/2”41 1/2”58” Ref*2 cu. yds.670 lbs.10 gauge10 gauge14 gauge-
1 1/2” dia.-48” (to top)77 1/2” (or specify)
(2) - 6”Polyurethane / Steel(2) - 6”Polyurethane / Steel
33” W x 26” H
Compactors
C-TEC’s Apartment Compactor
is big on performance.
INDUSTRIES, INC.
Waste Management Systems & Service TECCorporate Ofce PH: 866-622-CTEC (2832) Chicago, Illinois www.c-tecinc.com
INDUSTRIES, INC.
WasteManagementSystems&Service
T EC
Model: AP 001
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 5/49
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 6/49
Compactors
Self-Contained
Compactor / Containers
SCS Model Compactors
Designed or Wet Waste Applications
Their leak-proof construction makes
these units ideal for:
Malls I Hotels I Restaurants I Supermarkets
Food processing Plants I Medical Facilities
Standard FeaturesKey-Lock Start Switch
Red Mushroom-Head Stop Button
Power Unit Factory Ready or 208-230-460
Volt 3 Phase
Solid State Motor Starter Overload –
Adjustable 13-50 Amp
Automatic Motor Starter Reset
NEMA 12/13 Panel Box
Double End Pickup
Full 360 Degree Rear Door Seal
Power Unit Weather Cover
I N D U S T R I E
S, I N C.
W a s t e M a n ag e m
e n t S y s t e m s & S
e r v i c e T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 7/49
Compactors
SPECIFICATIONS
Mfr. Rating:Industry Rating:Clear Top Opening:Hydraulic Cylinders:Ram Penetration:Packing Force:
Ram Face PSI:
Hydraulic Pressure:
Ram Face Dimensions:
0.390.3324” x 31.5”19 3/4’ x 31’8 3/4”701514.43216.90624.128.2
QUALITY
By implementing the highest quality
steel fabrication and welding techniques,
C-TEC’s self-contained compactors are
designed and engineered to efciently
and economically handle maximum loads
and stresses in commercial and medium
industrial situations.
SAFETY
C-TEC models feature industrial grade
electrical and hydraulic systems and
conforms to all ANSI codes and safety
requirements.
OPTIONAL FEATURES
Compactors can be built for your specic
needs with custom-tted side or rear load
hoppers, security chutes, decks and other
optional equipment.
INDUSTRY EXPERTISE
Specializing exclusively in the
manufacturing of refuse equipment, C-TEC
provides many years of experience in the
industry. C-TEC provides quality equipmentwith cost-saving benets.
Pictures are for illustration only. Specications are subject to change without notice to accommodate design changes.
All compactors comply with ANSI standards, OSHA standards, and all electrical components are UL certied.
DIMENSIONS
2 cubic yards1.52 cubic yards58” x 40 1/2”(2) 4” bore x 2 1/2” rod6”Normal: 46,500 lbs.Maximum Pack-Out: 49,000lbsNormal: 25.8 PSIMaximum: 27.2 PSINormal: 1850 PSIMaximum: 1950 PSI30” x 60”
Cycle Time:Motor:Pump:Frame Floor:Frame Sides:Breaker Bar:Ram Face:Ram Floor:Ram Top:Ram Sides:Ram Guides:
ModelSCS1826SCS2030SCS2234SCS2439
Capacity26 cu. yds30 cu. yds34 cu. yds39 cu. yds
A51”51”51”51”
B40”40”40”40”
C66 1/2”66 1/2”66 1/2”66 1/2”
D19’ 0”21’ 0”23’ 0”25’ 0”
E8’ 9”8’ 9”8’ 9”8’ 9”
I N D U S T R I
E S, I N C.
W a st e M a n ag e m
e n t S y s t e m s & S
e r v ic e T E C
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 8/49
Compactors
Stationary
Compactors
Standard FeaturesNEMA Remote Control Station on 13 t Seal-Tite
Key-Lock Start Switch
Red Mushroom-Head Stop Button
Solid State Motor Starter Overload – Adjustable 13-50 Amp
NEMA 12/13 Panel BoxSide Mounted Power Unit
Power Unit Weather Cover
Power Unit Factory Ready or 208-230-460 Volt 3 Phase
Automatic Motor Starter Reset
I N D U S T R I E S , IN C .
W a s t e M a n a g e m e n t S y s t e m s & S e r v i c e
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 9/49
Compactors
QUALITY
By implementing the highest quality
steel fabrication and welding
techniques, C-TEC’s self-contained
compactors are designed and
engineered to efciently and
economically handle maximum
loads and stresses in commercial
and medium industrial situations.
SAFETY
C-TEC models feature industrial
grade electrical and hydraulic
systems and conforms to all ANSI
codes and safety requirements.
OPTIONAL FEATURES
Compactors can be built for your
specic needs with custom-tted
side or rear load hoppers, security
chutes, decks and other optionalequipment.
INDUSTRY EXPERTISE
Specializing exclusively in the
manufacturing of refuse equipment,
C-TEC provides many years of
experience in the industry. C-TEC
provides quality equipment with
cost-saving benets.
Pictures are for illustration only. Specications are subject to change without notice to accommodate design changes.
All compactors comply with ANSI standards, OSHA standards, and all electrical components are UL certied.
DIMENSIONS
IN D U S T R IE S ,I N C .
W a s t e M a n a g e m e n t S y st e m s & S e r v i c e
T E C
SPECIFICATIONS
Mfr. Rating:Industry Rating:Clear Top Opening:Hydraulic Cylinders:Ram Penetration:Packing Force:
Ram Face PSI:
Hydraulic Pressure:
Ram Face Dimensions:Cycle Time:Motor:Pump:Weight:Frame Floor:Frame Sides:Breaker Bar:Ram Face:Ram Floor:Ram Top:Ram Sides:Ram Guides:
2 cubic yards1.58 cubic yards58” x 42”6” bore x 54” stroke x 4 1/2” rod
11”Normal: 46,700 lbs.
Maximum Pack-Out: 55,100lbs
Normal: 27.3 PSIMaximum: 32.2 PSINormal: 1650 PSIMaximum: 1950 PSI
28.5” x 60”50 seconds10 H.P. TEFC11.5 GPM vane4,600 lbs.3/8” plate3/16” plate8” x 6” x 3/4” angle3/4” plate3/8” T1 plate1/4” plate1/4” plateUHMWPE
119 1/2”45 1/2”74”38 1/4”48”
C-TEC 200 C-TEC 300 C-TEC 400
3 cubic yards2.55 cubic yards58” x 67.5”6” bore x 78” stroke x 4 1/2” rod
10”Normal: 46,700 lbs.
Maximum Pack-Out: 55,100lbs
Normal: 27.3 PSIMaximum: 32.2 PSINormal: 1650 PSIMaximum: 1950 PSI
28.5” x 60”47 seconds15 H.P. TEFC17.5 GPM vane5,850 lbs.3/8” plate3/16” plate8” x 6” x 3/4” angle3/4” plate3/8” T1 plate1/4” plate1/4” plateUHMWPE
173 3/4”71”102 3/4”38 1/4”48”
4 cubic yards2.95 cubic yards58” x 67.5”6” bore x 78” stroke x 4 1/2” rod
10”Normal: 48,100 lbs.
Maximum Pack-Out: 56,500lbs
Normal: 24.7 PSIMaximum: 29 PSINormal: 1700 PSIMaximum: 2000 PSI
32.5” x 60”47 seconds15 H.P. TEFC17.5 GPM vane6,350 lbs.1/2” plate1/4” plate8” x 6” x 3/4” angle3/4” plate3/8” T1 plate1/4” plate1/4” plateUHMWPE
173 3/4”71”102 3/4”43 1/4”53”
ABCDE
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 10/49
Chutes & Chute Doors
Chutes Shaft
Our Trash and Linen Chutes are manufactured to comply with the latest N.F. P.A. 82 and nationalbuilding codes. Fully factory assembled with all vertical seams lapped and welded. The horizontalseams are slip joined. All chutes have a ush interior and are assembled without bolts, rivets, or
clips protruding into the chute opening. No other projections are inside the chute to snag the ow
of material. We provide steel angle frames at all oors. The adjustable intake door and frame are
securely fastened to the intake throat. At off-sets the chute will be reinforced and supported if required.
Our Warranty
We Guarantee our chutes against defective workmanship for a period of one year, providing allcomponents are properly used and maintained.
Trash & Linen Chutes
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 11/49
Chutes & Chute Doors
Trash & Linen ChutesIntake Doors* Ask about our ADA Pneumatic Doors. Intake doors are self-closing, with a positive latching system.
* The front is fabricated of polished stainless steel with aluminized steel backs.* Steel angle frame with 3-1/2” steel extensions.* Integral polished stainless steel trim, with top side embossed, designating the use of the chute. (English and Braille)* Pivot type hinge welded to the door frame.* Door equipped with chrome plated key locking “T” handle latching assembly, re rated locking (with two keys).* (ADA) Automatic push button door can be also provided if required
SizesStandard chute size is 24” per NFPA recommendations. Chutes are available in 36”,30”, and 20” diameters.
Material C-TEC chutes are constructed of 16 gauge standard aluminized steel, or can beconstructed with stainless steel or galvanized steel if required.
Fire Sprinkler SystemOur chutes have a 1/2” ushing spray head, a 165 degree automatic brass sprinkler above the top intake door. Complete with a tting for connection by re protectionor plumber. Sprinklers will be located at the top oor and on every other oor depending on local re codes.
Venting Vents are made the same diameter as the chute and extend4 ft. above roof of the building per NFPA. Vents include a topexplosion cap with a bird screen and roof ashing ange.
Discharge Doors1. Standard sliding discharge door for chutes is springloaded and held open with a 155° U.L. approved fusible link.
2. “B” construction type discharge door for linen chutes.3. Hopper-top hinged discharge door for linen chutes used
when a 90 degree offset is required.4. When a door is not required, the chute is connected
directly into a compactor by a transition.
Chute Cleaning A ushing head is provided for disinfecting and sanitizing. Disinfectant-sanitizer/access door unit can be added to the ush head at the top oor to periodically clean the chute with the proper solution. All Flushing unitsrequire 15” x 15” high side-hinged stainless steel access door bearing
a U.L. “B” label. The “B” label can be provided by C-TEC if required bycontractor. Complete with a tting for connection by plumber.
Optional Accessories* Sound Insulation: Factory spray coated with sound dampening
material and oor frame isolators.* Thru the Wall Door/Sleeve: to offer service away from the chute shaft.* Rubber or Steel Back Draft Bafes: To minimize the back drafting out
of the chute door.
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 12/49
THE SAFETY OF THE USER IS OF PRIMARYIMPORTANCE IN THE DESIGN OF ALL PTRHYDRAULIC BALERS. A HEAVY DUTY MAGNETIC FIELDPROXIMITY SWITCH at a high, partiallyconcealed location reduces the risk of misuse or open-gate operation. Theswitch senses that the counter-weightinside the gate support is raised whenthe gate is lowered, and allowsautomatic operation.
SIDE WHEEL LOCK releases the pressureslowly before the door is opened for thesafety of the operator.MANUAL SAFETY GATE must be closedbefore the baler can be operated. If thegate is raised during operation, theplaten will stop.PROTECTED PUSH BUTTONS reduce thepossibility of mis-operation.SAFETY SIGNS advise the operator onproper use and caution against unsafepractices.
THE PLATEN has been engineered toeliminate all stress on the connection pinbetween the cylinder and the platen,reducing the possibility of failure andinjury.HEAVY DUTY CONSTRUCTION, certied
welding, plant testing, and rigid QualityControl inspection provide unsurpassedQUALITY, STRENGTH, and DURABllITY.
CONCEALED PROXIMITY safety switch prevents automaticoperation unless the gate is fully closed, and reduces
operator inuence.
HEAVY DUTY CYLINDER with specially designed seals for quiet performance and long life.
HIGH-EFFICIENCY TEFC MOTOR combined with ashockless valve and a high pressure gear pump for quiet,efcient operation.
ENCLOSED ROLLER CHAINS AND SPROCKETS withoil-tight bearings provide positive tracking for easier gateoperation.
RAM GUIDES prevent platen from cocking when thechamber is unevenly loaded.
RECESSED ELECTRICAL CONTROLS with protectedpush-buttons.
SAFETY SWITCH prevents automatic baler operation unlessthe door is fully closed and locked.
HEAVY-DUTY LARGE WHEEL LOCK for operator safetyand gradual release of door pressure.
FRONT AND REAR RETAINER DOG SYSTEM .
SPLINED CONNECTIONS on shafts and couplings for longer life, more durability and easier maintenance.
BALE EJECTION SYSTEM with automatic ejector release.
NYLATRON WEAR PADS eliminating all metal-on-metalcontact areas.
EXTERNAL RESET PUSH-BUTTON for motor starter overload eliminates personel from having to open the controlbox.
OPTIONAL “GATE-SECURE” LOCKING SYSTEM FORTOTAL FEED GATE SAFETY MANAGEMENT!
Balers
Vertical BalersMODEL 3400 HDHIGH-DENSITYBALER
THE EMPHASIS IS ON SAFETY
INDUST RIE S, INC.
W ast e M anag ement Sy st ems & Ser v ice
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 13/49
INDUS TRIES,INC.
Waste Ma nageme ntS ystems &Se r vice
T EC
A MODEL FOR EVERY BALING REQUIREMENT:
Balers
C-TEC offers several baler models to meet any recycling or wasteapplication. Each baler is manufactured for superior strength, safety,reliable performance, and durability.
MODELS 324, 360 & 420: The Model 324 (24”) & 360 (36”) are designedfor use in areas with very tight space requirements. Our newest model, the420 (42”), provides a heavier bale while tting within a limited space.
MODELS 1800 HD & 3600 HDlP: These low prole balers are ideal for applications with limited space or low clearance. The 3600 HDlP can tunder an 8’ ceiling.
MODEL 2300 HD: A standard/high density baler constructed with heavy-duty structural steel and jig-xtured components. The 2300 HD canproduce bales up to 1,100 Ibs.
MODEL 3400 HD: C-TEC’s most popular high density baler, producing1,000 to 1,300 lb. bales of corrugated material. It is ideal for supermarkets,
chain stores, department stores, drug stores, and other commercialapplications. The Model 3400 HD will produce dense, heavy bales whichwill reduce the cost of storage space, handling, and transportation whilemaximizing recycling revenue.
MODEL 5000 HD: This extremely rugged, high density baler is constructedof heavy-duty structural steel components combined with a large industrialstrength motor for superior performance in heavy-duty industrial or recycling applications.
MODEL 7200 HD: C-TEC’s largest & most powerful baler, providingbale weights of up to 1,800 Ibs. The 7200 HD is ideal for warehouses,distribution centers, and recycling operations.
Model 324* 360* 420* 1800 HD 2300 HD* 3400 HD* 3600 HDLP 5000 HD 7230* 7200HD
A
B
C
D
E
F
G
H
I
J
K
L
M
NWidth (in)
Depth (in)
Height (in)
Bale Weight (lbs)
Cylinder (bore)
Pump (gpm)
Hinge
Motor HP
System Press (psi)
Platen Press (lbs)
Cycle Time (sec)
Control Volt (v)
Bale Ties
Electrical
Finish
C
l e a r a n c e s
B a l e S i z e
D i m e n s i o n s
7’ – 10”
3’ – 8”
2’ – 8”
5’ – 1”
6’ – 9”
3’ – 3”
1’ – 8”
2’ – 3”
2’ – 0”
5’ – 0”
3’ – 5”
0’ – 5”
1’ – 6”
1’ – 6”20
24
30
50 to 125
3 x 32
3.7
LH
3
1600
14,800
30
120
2 (14 ga., 9’)
7’ – 11”
4’ – 2”
2’ – 10”
5’ – 3”
6’ – 8”
3’ – 9”
1’ – 10”
2’ – 8”
1’ – 7”
5’ – 6”
3’ – 6”
0’ – 5”
1’ – 6”
1’ – 6”36
24
30
100 to 250
3 x 32
3.7
LH
3
1600
14,800
30
120
2 (14 ga., 9’)
7’ – 11”
4’ – 10”
2’ – 10”
5’ – 4”
7’ – 2”
4’ – 5”
2’ – 2”
2’ – 8”
1’ – 7”
6’ – 2”
4’ – 0”
0’ – 5”
1’ – 6”
1’ – 6”42
22
30
200 to 400
3 x 32
3.7
LH
3
1600
14,800
30
120
4 (14 ga., 9’)
11’ – 6”
5’ – 7”
3’ – 7”
7’ – 4”
9’ – 7”
5’ – 1”
2’ – 6”
3’ – 7”
2’ – 1”
7’ – 8”
4’ – 11”
0’ – 5”
1’ – 6”
1’ – 6”48
30
36
400 to 600
6 x 48
10.5
LH
10
1700
65,000
50
120
4 (14 ga., 14’)
12’ – 6”
6’ – 3”
3’ – 9”
8’ – 8”
10’ – 9”
5’ – 8”
3’ – 5”
4’ – 8”
2’ – 3”
8’ – 5”
5’ – 9”
0’ – 7”
1’ – 6”
1’ – 6”60
30
48
850 to 1100
6 x 48
10.5
LH/RH
10
2000
70,000
50
120
5 (14 ga., 14’)
12’ – 6”
6’ – 5”
3’ – 10”
8’ – 7”
10’ – 8”
5’ – 10”
3’ – 5”
4’ – 6”
2’ – 3”
8’ – 9”
5’ – 9”
0’ – 7”
1’ – 6”
1’ – 6”60
30
48
1000 to 1300
6 x 48
10.5
LH/RH
10 H.T.
2400
84,700
50
120
5 (14 ga., 14’)
7’ – 11”
6’ – 9”
4’ – 5”
6’ – 2”
7’ – 11”
5’ – 11”
3’ – 5”
2’ – 9”
1’ – 7”
9’ – 1”
5’ – 10”
0’ – 7”
1’ – 6”
1’ – 6”60
36
30
600 to 800
6 x 27
10.5
LH/RH
10 H.T.
2400
84,700
32
120
5 (14 ga., 14’)
12’ – 6”
6’ – 5”
3’ – 11”
8’ – 7”
10’ – 11”
5’ – 11”
3’ – 5”
4’ – 5”
2’ – 2”
9’ – 1”
5’ – 9”
0’ – 7”
1’ – 6”
1’ – 6”60
30
48
1100 to 2000
7 x 48
15
LH
20 H.D.
2100
102,000
53
120
5 (12 ga., 16’)
12’ – 6”
7’ – 3”
3’ – 2”
8’ – 6”
10’ – 8”
6’ – 8”
3’ – 6”
4’ – 6”
2’ – 2”
10’ – 8”
6’ – 6”
0’ – 7”
1’ – 6”
1’ – 6”72
30
48
1100 to 1500
6 x 48
10
LH
10 H.T.
2400
70,650
53
120
5 (14 ga., 16’)
12’ – 6”
7’ – 3”
4’ – 10”
8’ – 7”
10’ – 11”
6’ – 9”
3’ – 5”
4’ – 5”
2’ – 2”
10’ – 8”
6’ – 6”
0’ – 7”
1’ – 6”
1’ – 6”72
42
48
1500 to 1800
7 x 48
15
LH
20 H.D.
2500
115,000
53
120
5 (12 ga., 16’
Ind. Heavy-Duty Low Profle Ind. Heavy-Duty
High Intensity
Ind. Heavy-Duty
High Intensity
208 - 230/460 volt, 3 Phase, NEMA 12
Semi Gloss Machinery Green
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 14/49
THE BEST BALER IN THE BUSINESS
C-TEC is a recognized source of high-quality products
manufactured for safety and long life. From our rst 60”
downstroke, high-density baler capable of producing balesof over 1,000 Ibs. to our current line of Hydraulic Balers,
C-TEC represents years of developmental design, testing,
and quality control.
When you order a C-TEC Baler for any type of recycling
requirement, the benets of our experience will be
immediately apparent. Many advanced design features
combine to make operation easy without sacricing
safety. Our balers can handle your toughest requirements
with routine efciency at a low maintenance cost for
many, many years.
Balers
STANDARD FEATURES (TOTAL U.L. APPROVAL)
• Key-Operated ON/OFF Switch
• Soft Shift Shockless Hydraulic System
• Safety Interlocks on Baler Door & Safety Gate
• Motor Overload Protection
• Factory Wired for Easy Installation
• Factory Testing and Engineering Inspection
• Extended Warranty on any Major Components• Comprehensive Maintenance and Safety Manual
• Installation Hardware and Accessories
• 24 hour 1-800 Customer Service Hotline
• Safety/Training Videotape Supplied with each Baler
• Starter Bundle of Baling Wire & Poker Bar
OPTIONAL EXTRAS
• Automatic Bale Sizer with Full Bale Light
• Outdoor Protective Finish
• Outdoor Rain Shields for Power & Electrical Controls
• Oil Heater for Outdoor Service
• Leaf-Type Ejection Chain with Double Chain Pins
• Wall Brackets for Bale Tie Storage
• 550 Volt Motor
• Side-Mounted Power Pack
• Automatic Ejection System
• Wire Tie Guides
INDUS TRIES,I NC.
Waste Management Systems& Service
T EC
INDUSTRIES, INC.
WasteManagementSystems& Service
T EC
INDUST RIE S, INC .W ast eM a na g ement Syst ems &Ser v ice
T E C
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 15/49
The safety gate operates with a minimum of operator effort, due to the enclosed roller chainmounted on sprockets with oil-tight bearings.Our concealed safety switch preventsoperation in the automatic mode unless the gatis fully closed. A pressure gauge is mountedprominently on the baler, allowingthe operator to check periodically to ensureproper operating pressure.The pressure canbe adjusted, if necessary. A dual set of retainer
dogs prevents corrugated material frombouncing back up into the loading chamber.Retractable dogs at the upper level of the door are standard on our rugged Model5000 HD and 7200 HD.The side wheel-lock gradually releases the pressure for theoperator’s safety, preventing the door fromopening suddenly. The protected position of theelectrical controls minimizes the risk of damage
A metal plate detailing the operator instructionson: the proper use of the baler, the wiring, andejection of the bale, The plate is fastened ontoevery control box with tamper-proof screws. Inaccordance with ANSI standards, the controlbox is labeled with the proper warnings and akeyed on/ off switch is utilized.
Balers
RUGGED CONSTRUCTION
High-quality welding is an important contributor to extendedbaler life. C-TEC has worked closely with the nation’s leadingwelding experts to develop balers with the highest qualityand strength in the welds. Baler frames and componentsare positioned to ensure maximum penetration. Certied
welders follow a special process to weld the critical inner core of the platen.
Every baler is thoroughly factory tested to ensure that thesafety devices, cylinder, door lock, gate, power pack, andframe meet C-TEC’s high-quality standard.
At C-TEC, we take every step necessary to ensure deliveryof the nest balers possible. After testing, each unit is
inspected by a member of our Quality Control Departmentto verify performance and appearance.
DESIGN FEATURES
The platen is the most critical area of design andconstruction in a high-density baler. C-TEC’s Balers featureheavy duty platens of structural steel design, engineeredto eliminate all stress on the connection pin between thecylinder and the platen during compression. This minimizesthe possibility of pin failure and an operator injury.
In our high-density models, stress is reduced by replaceablewear pads and the close-tolerance t of the platen inside
the baler chamber. This protectsthe structure, platen, andcylinder from the effects of stress and allows longer,low-maintenanceperformance.Energy savings are realizedby the unique combination of our hydraulic system, hightorque motor, and other design
factors which use half the power of other high-density balers. Thisincrease in efciency will result in signicant
savings year after year. The cyIinder is a key componentin good baler performance. The engineered combination of seals, pistons, and gland provide superior bearing quality inour cylinders. The door cylinders are designed to compensatefor side Ioads and are furnished with a thick steel cap toeliminate exing under pressure.These features combine to
provide many years of quiet, efcient performance.
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 16/49
Balers
203 AND 72 SERIES
Horizontal Auto Tie Balers
POWERFUL HIGH DENSITY BALERS FOR THE MOST DEMANDING APPLICATIONS
Industry leaders
or more than 40 years
C-TEC is the gold standard or powerul, reliable,
and durable balers. C-TEC 203 and 72 series balersprovide ast, efcient baling with versatility.
Versatile to suit your application• Completely unattended operation
• Wide range of bale cross-sections and in-feed
hopper sizes available
• Advanced Automatic Tying (no hydraulics)
• Variable-length baling to meet storage and
shipping requirements
• Manufactured with brand name components
• Full range of options available for all models
• Available as a stand alone unit, or as part of a
complete baling system (pneumatic scrap system,
conveyor feed or cart tipper)
Big On Power.
Engineered with Innovation.
Built to Last.
INDUSTRIES,INC.
WasteManagementSystems&Service
T EC
The Horizontal Auto Tie Baler
is ideal for:
Box Manufacturing • Plants • Printers • Breweries
Paper Converters • Tissue and Paper Mills
Distribution Centers • Manufacturing Plants
Documentation Destruction Centers
Virtually any scrap material!
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 17/49
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 18/49
Odor Control Systems
Odor Neutralizers
C-TEC’s Odor Neutralizers are industrial ozone generators.
Ozone control systems produce ozone electronically from oxygen in the air. Ozone is an activated form of oxygen that oxidizes odor molecules and reduces them to odorless compounds. These systems are used in
numerous applications to control and destroy organic odors. All of C-TEC’s models have an adjustable ozoneoutput level to allow maximum output for short treatments, or lower levels for longer treatments or continuous
use. These models are designed for use in uninhabited locations, unless used with control methods to limit theozone level to OSHA to EPA limits. There are many uses for C-TEC’s Odor Control Neutralizers.
Please contact us for applications and selections in other cases, to meet your requirements.
Optional Items:PVC Flex Hose•
Alum. Y Fittings•SS Hose Clamps•Wall Mounting Kit•
Alum. Flanges•PVC Elbows•Weatherproong•Ozone Sensors•24 Hour Timers•
(Programmable)
IND UST RIE S, INC .W a st e M a na g ement Sy st ems & Ser v ice
T E C
I N D U S T R I E S , I N C .
W a s t e M a n a g e m e n t S y s t e m s & S e r v i c e
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 19/49
Odor Control Systems
Odor Neutralizers
Use the chart below to select C-TEC’s Odor Neutralizer model that ts your needs.
For more information or technical information, please contact us by phone or fax.
115A
IND UST RIE S, INC .W a steM a na g ement Sy stems&Serv ice
T E C
330A
IND UST RIE S, INC .W a st eM a na g ement Sy st ems& Ser v ice
T E C
630A
I N D U S T R I E S , I N C .
W a s t e M a na g e me nt S y s t e ms & S e r v i c e
T E C
Table of Sizes
Model 115A 330A 630A
8 to 306 to 233240 to 12,15092 to 34424 x 24 x 14610 x 610 x 356
6027.3
125W
6086
30 to 5023 to 3812,150 to 20,250344 to 57436 x 24 x 14914 x 610 x 356
9040.9
260W
100141
0 to 80 to 6405 to 324011 to 9222-1/4 x 24 x 9-1/4565 x 610 x 235
3415.5
70W
6086
Compactor/Container SizeApproximate Volume
Garbage Room VolumeApproximate Volume (varies with odor load)
Dimensions
Weight
Wattage
115VAC 50/60 cycle AC only single phase (220 – 240 VAC optional)Blower Air Volume @ 0” SP
@ 60hz@ 50hz
(cu. yds.)(cu. m.)(cu. ft.)(cu. m.)(in.)(mm.)
(lbs.)(kg.)
(cfm)(cu m/hr)
E q u i p m e n t S p e c i f c a t i o n s
A p p l i c a t i o n s
C a
b i n e t
Odor Neutralizer Features:
Destroys odor molecules electronically•& prevents pest attracting odorsUses no chemicals•
Unitized Construction•Installs in minutes•Plugs into standard 115 V outlet•(220 V, 50Hz optional)Simple dial operation to match odor •levelQuick connection/disconnection from•compactor/container Provides cooling to compactor/•container Completely sanitary•Low operating cost•
C-TEC’s Odor Neutralizers
are industrial ozone
generators and are to beutilized in uninhabited areas
or in volumes limited by
OSHA regulations.
Optional ozone limiting
controls are available.
3 Models Available
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 20/49
Odor Neutralizers
The odor neutralizer
can be used in a largevariety of systems and
in conjunction withother products.
ODOR CONTROL IN A
GARBAGE OR WASTE
COLLECTION ROOM
All of C-TEC’s models can be provided
with an optional ozone sensor thatautomatically controls the ozone levelto a maximum of 01 ppm (OSHAworking environment level). Exhaust to Outdoors
Chute fromUpper Floors
Compactors
Container
C-TEC’s Models Work on Both Stationary
and Self-Contained Compactors
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 21/49
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 22/49
Containers
TAPERED TUB-STYLE ROLL-OFF
Containers
Tapered front and sidesare designed for easier unloading. This feature alsoallows more containers tobe stacked per load.
Our tapered front serves
two distinctive purposes.The rst is ease of dumping
and the second is for easyaccess to the loading hook.
I N D U S T R I E S , I N C .W a st e M a na g e me nt Sy st e ms &Se r v ic e
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 23/49
Containers
TAPERED TUB-STYLE ROLL-OFF
ContainersCombine heavy-duty hinges withour no-hassle latch door lockingsystem and you have the perfectcombination prefered by our customers.
This Door is tough!Featuring 10 gauge steel
standard and structural tubing of 3” x 3”.
Our System stacks up for economical transport!
*4 40-yard Containers per Load
*8 30-yard Containers per Load
*10 20-yard Containers per Load
SpecicationsFeatureFloorsFloor ChannelChannel SpacingSides, Front and Door
Nose ConesRails
Top RailDoor FrameFront Corner GussetsTarp Bar & Ladders
Ask one of our sales representatives about some of our popular options.
Standard3/16”3” Structural 4.1# per ft.16” - 18” centers10 gauge
Solid6” x 2” x 1/4” structural tubing4” x 4” structural tubing3” x 3” structural tubingInside & Outside1/4” x 1” Flat Bar
I N D U S T R I E S , IN C .W a st e M an a ge me nt Sy st e ms&Se rv ic e
T E C
Heavy Duty1/4”3” 4.1# per ft.12” centers3/16”
Solid6” x 2” x 1/4” structural tubing4” x 4” structural tubing3” x 3” structural tubing
Inside & Outside1/4” x 1” Flat Bar
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 24/49
Containers
RECTANGULAR ROLL-OFF
ContainersSERVING YOUR ROLL-OFF NEEDS
30 Cubic Yard Open Top
Rugged Design Features
Latch Door Locking System
Prefered by Customers with
No-Hassle Locking Handle
Let C-TEC make it’s mark on your bottom line. Reducing your rubbish
costs means more dollars in your pocket at the end of the month.
INDUSTRIES,INC.
Waste ManagementSystems& Service
T EC
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 25/49
Containers
Structural Tubing Door
Frame and heavy Duty
Hinge Ensure Extended
Life and Easy Open/Close
Operation
RECTANGULAR ROLL-OFF
ContainersSERVING YOUR ROLL-OFF NEEDS
SpecicationsFeatureFloorsFloor ChannelChannel SpacingSides, Front and DoorSide Post Spacing
Nose ConesRailsTop RailDoor FrameFront Corner GussetsTarp Bar & Ladders
Standard3/16”3” Structural 4.1# per ft.16” - 18” centers
12 gauge30” CentersSolid6” x 2” x 1/4” structural tubing3” x 3” x 1/8”structural tubing3” x 3” x 1/8”structural tubingInside & Outside1/4” x 1” Flat Bar
Heavy Duty1/4”3” 4.1# per ft.16” - 18” centers3/16”30” CentersSolid
6” x 2” x 1/4” structural tubing3” x 3” x 1/8”structural tubing3” x 3” x 1/8”structural tubingInside & Outside1/4” x 1” Flat Bar
Floor Channel on 12” Centers•
Side Posts on 24” Centers•
Angle Around the Top of the•
Container 2” x 2” x 1/4”
Weather strips 1/2” x 2” Flat bar •
on Rails
4 Wheels•
Cam Lock System•
Popular Options:
INDUSTRIES,INC.
Waste ManagementSystems& Service
T EC
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 26/49
Containers
COMPACTION RECEIVER
Containers
Available in 21 cu. yd. thru 50 cu. yd. capacities
and from 14’ to 26’ lengths.
C-TEC’s closed Receiver Containers are engineered and constructed to
withstand the repeated high pressure of today’s compactors. They are
designed to provide long-lasting dependable service for high volume
refuse accounts. Each container is built by our trained and experienced
personnel to t most major brands of roll-off hoist.
All containers are inspected by our quality control department and must pass our rigid test procedures.
Whatever the need, C-TEC can supply you with the compaction
container to satisfy your refuse needs. C-TEC represents many years of
experience in the manufacturing of refuse containers.
INDUS TRIES, INC.
Waste Manageme nt S ys tems &Ser vice
T EC
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 27/49
Containers
COMPACTION RECEIVER
ContainersStandard features
1. Heavy duty rear hinges
with grease ttings
2. Compatible with
most major roll-off hoist
systems.
3. Primed and nish
painted in the color of your
choice.
4. Door openings for most
major brand stationary
compactors.
C-TEC is continually striving to improve their products through new and improved techniques
and knowledge. C-TEC reserves the right to make any changes at any time without notice.
Inside Dimensions
Model Number A B C D Capacity
PR 1490
PR 1690
PR 1890
PR 2090
PR 2290
PR 2490
PR 1484
PR 1684
PR 1884
PR 2084
PR 2284
PR 2484
PR 1472
PR 1672PR 1872
PR 2072
PR 2272
PR 2472
PR 2690
14’
16’
18’
20’
22’
24’
14’
16’
18’
20’
22’
24’
14’
16’18’
20’
22’
24’
26”
87”
87”
87”
87”
87”
87”
87”
87”
87”
87”
87”
87”
87”
87”87”
87”
87”
87”
87”
90”
90”
90”
90”
90”
90”
84”
84”
84”
84”
84”
84”
72”
72”72”
72”
72”
72”
90”
81”
81”
81”
81”
81”
81”
81”
81”
81”
81”
81”
81”
81”
81”81”
81”
81”
81”
81”
28 Cu Yd
32 Cu Yd
35 Cu Yd
40 Cu Yd
42 Cu Yd
46 Cu Yd
25 Cu Yd
28 Cu Yd
32 Cu Yd
36 Cu Yd
40 Cu Yd
44 Cu Yd
21 Cu Yd
24 Cu Yd27 Cu Yd
30 Cu Yd
33 Cu Yd
36 Cu Yd
50 Cu Yd
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 28/49
Containers
C-TEC has combined many years of development, eld testing, and
customer input into a new generation of Front Load containers for the
waste handling industry. Available in 2 through 10 cubic yard capacities,
C-TEC Front Load containers are constructed of quality AISI grade steel,
built to exacting specications, and designed for years of dependable
rugged service. Plus, each container meets or exceeds all industry
standards and carries a full one year warranty.
FRONT LOADING
ContainersINDUSTRIES,INC.
WasteManagementSystems&Service
T EC
INDUST RIE S, INC.W ast eM anag ement Systems & Serv ice
T E C
INDUSTRIES, INC.WasteM anagementSystems& Ser vice
T E C
INDUST RIES,INC.W asteM anag ement Sy st ems&Serv ice
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 29/49
Containers
FRONT LOADING
Containers
FEL 2 FEL 3 FEL 4 FEL 4 FEL 6 FEL 6 FEL 8 FEL 8 FEL 10
Model LOW P. STD SLANT STD SLANT
Minimum Capacity Cubic Yds.
Front Loading Height (A)
Side Loading Height (B)
Interior Height (C)
Interior Depth (D)
Interior Width
Lid Size 2 Each
Side Door Size 2 each H x W
2
39
N/A
41
36
72
36 x 42
N/A
3
48
N/A
48
48
72
36 x 58
N/A
4
51
N/A
60
53
72
36 x 58
N/A
4
45.5
N/A
47
55
72
36 x 58
N/A
6
63
31
64
66
72
36 x 58
30 x 30
6
51
N/A
60
72
72
36 x 58
N/A
8
75
44
76
72
72
36 x 58
30 x 30
8
51
N/A
73.5
80
72
36 x 58
N/A
10
82
45
80
75
72
36 x 58
37 x 32
Heavy duty 7 ga. fork sleeves with full length totally •
enclosed gussets
7 ga. fork sleeve back up plates with integral extended •
bumpers
7 ga. fork entry guides•
7 ga. top edge reinforcement channels•
7 ga. full length bottom reinforcement channels•
12 ga. side walls•
Side walls reinforced with pressed V-ribs on four •
through eight cubic yard containers
Double wall plastic lids•
Two coats of zinc chromate primer applied inside and •
out
Two exterior nish coats of high gloss industrial •
enamel
Standard Features:
Steel lids•
Casters: 2 rigid, 2 swivel • Heavy duty 7 ga. bottom•
Steel side doors 6 and 8 cu.yd.•
containers
Optional Features:
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 30/49
Lifts
C/I Taskmaster Series
Hook DriveMechanism SecuresCart During Dump
Cycle
Strong 1/4” WallStructural Steel
Tubing
Stationary or Mobile(optional locking
casters for mobileapplications shown)
41 - 61” Dump-over Height•
Up to 500 lbs. Lift Capacity•
6-8 Second Cycle Time•
1800 psi Working Pressure•
40 • o Dump Angle
Specications:
Easy to use Pendant Contro(Standard on all C/ITaskmaster Series)
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
I N D U S T R IE S
, IN C.
W a s t e M a n ag e m
e n t S y s t e m s& S e rv i c e
T E C
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 31/49
Lifts
C/I Taskmaster Series
The C/I Taskmaster Series offers an economical and safety-
conscious solution for a wide variety of material-handling
applications. Taskmaster lifts are also ideal for use with
balers and compactors.
All ANSI Z245.60-1996 Type B•
Containers (standard 2-bar)
Ameri-Kart 1/2 cu. yd. to 1 cu. yd.•
Tilt Trucks with ANSI Standard 2-bar
Conguration
Rubbermaid 1/2 cu. yd. Tilt Trucks•
(with bolt-on adapter)
Cart Compatability:
INDUS TRIES, INC.
Was te Ma nage me n t S ys te ms&Se rv ice
T EC
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 32/49
Lifts
C/I Taskmaster Series
• 12V DC Battery with Box (Charger Included)
• Audible Alarm
• Audible Alarm with Light
• Battery Percentage Meter
• Castors
• Custom Chute
• Drum Adapter
• Expanded Metal Cage
• Expanded Metal Cage withDoors (Electrical Interlocks)
• Priority Flow Control Unit
• Hand-Held Push Button
Pendant Control
• Heavy-Duty Deep CycleBattery
• Hydraulic Hand-Operated Directional Valve
• Machine Mounts
• On/Off Keyed Switch
• Rubbermaid Adapter
• Single Point Locking Mechanism(Mobile Unit Only)
• Strobe Light
• Tap-In Kit
Options:
Ameri-Kart •
Bomac •
Cascade•
Otto Industries•
Rehrig Pacic Company •
Rotonics•
Rubbermaid •
Techstar Plastics•
Toter •
Ultracart •
Zarn•
These products will work
with the following additonal
manufacturers:
INDUST RIE S, INC.W ast e M anag ement Sy stems& Ser v ice
T E C
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 33/49
Lifts
Compact Lifter
Versatile Design•
Deep Dumping Action•
Simple Operation•
Reliable Service History•
Proven design has become a staple tothe waste haulers across the country.
The Compact lifter series is second only to Tuck-away Lifter
in popularity throughout the refuse industry. These lifters
offer a rugged design with a thin prole that works well in a
wide range of applications.
Whether mounted to a front load carry-can, rear-loader, or side-loader, these models are
workhorses that lift carts high and deep for maximum dumping performance. The 20K helical rotary
actuator offers a smooth dump motion and a dependability that puts the competition to shame.
Rubber coated upper saddle and
lower stops, combined with a
spring-loaded lower latch protect
your cart investment, while the
maintenance requirements are
simple and straight-forward.
Models D6070-20k & D6071-20k
INDUST RIE S, INC.W asteM anagement Sy st ems & Ser vice
T E C
INDUSTRIES, INC.
Waste Management Systems & Service TECCorporate Ofce PH: 866-622-CTEC (2832) Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 34/49
Lifts
Compact LifterSPECIFICATIONS
This prole is perfect for carry-•
ons and sideloadersWeight capacity: 350lbs@•
1950 PSIFull compatibility to 60-95•
gallon plastic US-style carts6-8 second cycle time @ 2.5•
GPMSplined ends on Actuator •
shaft for maximum torquetransmission and long life
PVC-coated upper hook and•
lower stop20k Helical Rotary Actuator •
rated @ 3,000 PSI maxSteep 45 degree dump•
angle1/2” A36 HRS driver and•
adler arms1/2” A36 HRS rear mounting•
plate for easy servicing2-year limited warranty•
A B C
39 1/2”
43 1/2”
D6070-20K
D6071-20K
8 1/4”
9 1/2”
43 3/4”
52 1/4”
INDUSTRIES, INC.W asteM anagement Systems& Service
T E C
INDUST RIES, INC.
W asteManagement Systems& Service
T EC
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 35/49
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 36/49
2-Wheel Carts
2-Wheel Carts
C-TEC MSD - “MULTI-SYSTEM DESIGN”
32, 68, 95, 95M
C-TEC offers a wide variety of MSD carts for use in residential, commercial,
and industrial environments. Backed by C-TEC, plus years of industry
experience. MSD carts are built with superior injection molded bodies and
extra thick walls to withstand extremes in temperature and handling. Detail
design features allow carts to be picked up by semi and fully automated
lift mechanisms and all MSD carts can be tted with C-TEC’s optional
accessories to accomadate program specic refuse and recyclable material
collection applications.
IND U ST R IE S, INC .W a st eM a na g ement Sy stems&Ser v ice
T E C
I N D U S T R I E S , I N C .
W a s t e M a n a g e m e n t S y s t e m s & S e r v i c e
T E C
I N D U S T R I E S , I N C .
W a s t e M a n a g e m e n t S y s t e m s & S e r v i c e
T E C
I N D U S T R I E S , I N C .
W a s t e M a n a g e m e n t S y s t e m s & S e r v i c e
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 37/49
2-Wheel Carts
2-Wheel Carts
SPECIFICATIONS AND ACCESSORIES
Recycling Lid Rings Dome Lids Security Lock System
Cart Accessories
C-TEC now offers its 95 and
95M gallon MSD cart with
a freely rotating steel lower lift bar designed for fast,
easy assembly and long life.
The new bar is available
as an option to our valued
customers who prefer this
design feature.
C-TEC’s service team offers to repair any damaged plastic
container from whatever brands either on your premises or in
one of our centrally located repair shops.
Cart welding will extend the life of your damaged containers
reducing capital expenditures. The process used is state of
the art welding technology that allows for color matching and
smooth surfaces for a perfect seamless repair.
Cart Welding Service
In-mold
Labeling
Technology
MSD-32 MSD-68 MSD-95 MSD-95M (32 GAL) (68 GAL) (95 GAL) (95 GAL)
Weight
Capacity
Overall
Height
Overall
Width
Overall
Depth
Assembly
Weight
Base Wall
Thickness
Lid WallThickness
150 lb.
68 kg.
38.50”
977.90 mm
18.88”
479.55 mm
22.50”
571.50 mm
27 lb.
12.2 kg.
0.145”
3.68 mm
0.130”3.30 mm
238 lb.
107.9 kg.
42.12”
1069.85 mm
25.25”
641.35 mm
26.38”
670.05 mm
42 lb.
19.1 kg.
0.175”
4.45 mm
0.130”3.30 mm
335 lb.
151.9 kg.
46.50”
1181.10 mm
26.38”
670.05 mm
33.62”
853.95 mm
49 lb.
22.2 kg.
0.175”
4.45 mm
0.130”3.30 mm
335 lb.
151.9 kg.
40.75”
1035.05 mm
29.4”
746.76 mm
33.9”
861.06 mm
44.2 lb.
20 kg.
0.156”
3.9624 mm
0.130”3.30 mm
Before
After
Water tight lid designliminates leakingnd reduces odors.
Standard “CushionTread” injection-molded wheels are
100% recyclable.
Blow-moldednap-on wheels
with integrated axlepacers are availablepon request.
One-piece lid requiresno assembly.
Cart details availablefor use with all lifters.
Super strong wellsincrease cart durabilityand wind stability - up
to 40 mph when empty.
68 and 95 gallon MSD
Carts can be orderedwith integrally moldedplastic or metal lower
lift bar.
Dual reinforcedwear strip designfor extended cart
bottom life.
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 38/49
2-Wheel Carts
NEW
BEAR-RESISTANTCART
BearMinder
Available in 32, 68 and 95•
gallon sizes
Simple one nger •
unlatching
Snap, shut lid, no manual•
latching
Reinforced cart body•
Durable injection molded•
construction
Equally suited for trash or •recycling
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 39/49
2-Wheel Carts
Bear Minder
I N D U S T R IE S,
IN C.
W a st e M a n ag e m e n
t S y s te m s & S er v ic
e T E C
The new C-TEC BearMinder cart is the solution for residential regions where bears or wildlife are a problem in container intrusion. These carts have been Grizzly bear tested in Montanato keep animals out and refuse in.
Designed specically for manual and semi-automated collectionsystems, the unique push-to-close latching system is easy toopen with one nger. And the snap-shut lid doesn’t leave it up tothe homeowner to remember to re-latch the container.
With installations from coast to coast including YosemiteNational Park and great Smokey Mountains, these carts provideyears of dependable service.
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 40/49
Waste Director
C O M P A C T O R
Waste Director100 MONITOR SYSTEMOptions:
Automated pick-up request sent to a•fax machine in addition to a PC
Automated pick-up request sent to a•pager in addition to a PC
On-site Advisory light conrms that a•successful pick-up request has beenmadePhone line splitter systems enable•a single phone line to communicatewith 2 or up to 9 separate compactor monitors
Wasteview/Internet based monitoring•enables viewing of fullness levels,compactor pressure settings, andhas contact’s phone numbers for any compactor, via the web. Can beaccessed on any computer, any time,any where. Allows for compactor pick-up via notication via e-mail.
WinEdge PC SoftwareProgram and Equipment:
Links Waste Director compactor •Monitor to a designated PC.Communicates with 1 or 1000’s of monitors
On-demand and automatic reports•provide a variety of valuable andtimely management information,including pick-up dates for invoice
justication.
Request a fullness level status report•on any compactor at any time.
Programmable “full” pick-up level for •each compactor. Allows for differencesin compactors and in hauler’sresponse time.
Can be programmed to eliminate•week-end or holiday pick-ups.
Standard Operation and Conguration:
A Waste Director 100 Fullness is•required for each compactor. To beinstalled at the waste compactor site.
The monitor operates in conjunction•with the Waste Watcher Systemsoftware program
The Monitor automatically sends a•
“Full” and “Empty” containers statusreports to a computer.
Standard system features:
A Waste Director Model 100•Fullness Monitor / Enclosure
Digital pressure transducer with•snubber.Built-in board level modem•
Built-in RS232 port for on-site•communication.
Power lter with surge protection•
On-board LED status lights•
Non-volatile memory prevents•data loss during loss during power interruption or extended power loss.
Automatically reinitializes after a•power failure.
Communication and Equipment Requirements:
Computer – for use with•
Waste Watcher software.
Pentium class computer •running Windows 95, 98, NTME, or XP.
Phone:•Standard phone line
Specications
Power Requirements:120 volt AC 60 Hz 20 watt 4 amp
Operation Temperature:-40o to + 140oF
Enclosures / DimensionsNEMA weatherproof, 14 gaugesteel. Hasp for locking.W 11” x H 13-1/2” x D 5”Designed for indoor or outdoor use
INDUST RIE S, INC.W a st eM a na g ement Sy stems & Ser v ice
T E C
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 41/49
Waste Director
C O M P A C T O R
Waste Director100 MONITOR SYSTEMThe Waste Director 100 Monitor System provides the ultimate in control and reduction of
waste compactor pick-up frequency. The result is cost reduction.
Waste Director 100 accurately determines when a compactor container is ready for pick-
up. The System automatically sends a pick-up request to a PC, utilizing WinEdge Software.
Management reports are generated automatically and/or manually, as needed.
The system is retro-ttable to most new or existing compactors.
Features / Benets
Using a patented process of electronically•
monitoring a compactor’s container activity,WASTE DIRECTOR automatically reportscontainer fullness levels to a PC or directly to the
internet.
Eliminates pick-ups of partially lled containers.•
Can reduce the number of pick-ups by an averageof 40%.
No employee involvement in checking and•
reporting on container fullness levels and callinghauler.
Reports can be used for justication of hauler’s•
billings.
The unique System intelligence eliminates•
false “full” readings caused by jams and other temporary pressure surges.
Redial feature make sure call gets through.•
Changes in compactor usage due to•
seasonal activity and Holidays are nolonger a concern.System can be programmed to•
eliminate week-end or Holiday pick-up.
Timely pick-ups assure a cleaner, safer•
work environment.
Timely pick-ups eliminate over-weight•
containers.
INDUST RIES, INC.W asteM anagement Sy st ems & Ser v ice
T E C
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 42/49
Waste Director
A Waste Director Feature
The “Planner” is an exciting feature which is included with waste director Fullness monitors.
This feature provides the capability to plan ahead for one day or up to a full year to cover situations which may require earlier or timelier pick-ups to avoid week-end or holiday pick-ups, overow or packing –out. With the Planner, haulers and
facilities will be prepared in advance to handle these special situations.
The “Planner”
These anticipated pick-ups can be accommodated in the programmed setting so
that the Fullness monitor will automatically call-out for special pick-ups, basedon an adjusted setting for 1 or up to 365 specic dates. The Planner provides
haulers with ample lead time to do an efcient job of taking care of a customer’s
special needs.
This unique, patented feature is just another reason why Waste Director
products are #1 in the monitoring industry.
For more information on what the Planner will do, contact your sales agent.
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 43/49
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 44/49
Waste Equipment Service & Repair
Our maintenance programs are specically designed to prolong the life of your
equipment, and prevent possible safety hazards in addition to reducing unnecessary
maintenance and repair costs. Our service department is available 24-hours a day,365 days a year, with several shops offering an average response time of 2 hours and
facilitating the highest standards in customer service and satisfaction.
C-Tec’s Certied Technicians specialize in the following areas:
• REPAIR & MAINTENANCE OF WASTE EQUIPMENT & OPTIONS• WASTE EQUIPMENT ELECTRICAL SYSTEMS & OPTIONS
• HYDRAULIC SYSTEMS & CYLINDERS
• WASTE EQUIPMENT RELOCATION AND INSTALLATION
• RETRO-FIT AND FABRICATION• HOPPERS AND FIRE CHUTE DOORS
• DECKS AND RAILINGS
• ODOR CONTROL SYSTEMS
• WASTE MONITORING SYSTEMS
C-Tec represents and warrants that only qualied, trained, careful and efcient employees in strict
conformance with the highest industry practices and standards shall perform the Services. C-Tec shall beresponsible for initiating, maintaining and supervising all safety precautions and programs in connectionwith the performance of a Maintenance Agreement.
AT COSTS YOU CAN AFFORD
We can often save you more than the cost of our service alone. So why not call today?
Service & Repair
CUSTOMER SERVICE DEPARTMENT
C-Tec Industries has become the “Go To Company” for waste reduction and recycling equipmentservice and repair.
“We are continually reminding our customers that they are the very existence of our being”.Our Service Technicians are manufacturer certied in troubleshooting and repair of waste reduction
and recycling equipment.Our Fabrication Shops & Vehicles are fully equipped with the necessary equipment, tools and
common parts for waste reduction and recycling equipment.
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 45/49
Save on Service Costs with Pro-Active Measures
C-Tec Industries, Inc. believes that we can save our customers money by introducing them to aservice we call Pro-Active Preventative Maintenance.
Preventative Maintenance involves a PRO-ACTIVE APPROACH that includes detailed equipmentinspections that will extend the service life of your equipment.
A detailed list of WHAT we do and WHY we do it are as follows:
1. Change Hydraulic Oil A Minimum of Once Per Year
Reason: Extends the life of hydraulic cylinders and pumps with the use of the highest qualit
hydraulic oil blends
2. Grease Ram Guides and Pivot Points
Reason: Signicantly extends the life of ram guides and cylinders
3. Up to 37 Point Inspections - Maintenance Records
Reasons:
Reduces Repair Costs - Thousands of dollars are saved over the lifeof the equipment. Typical repairs to hydraulic cylinders and pumpsthat may exceed $1,000.00 may be avoided with proper maintenancerecords scheduling routine maintenance.
Safety- OSHA Regulations / ANSI Standards - Meet or exceedrequired equipment owner responsibility which supports companysafety guidelines. Reduces the potential for workman’s compensationclaims.
Employee/Company Productivity - Operational controls and functionsof equipment will be working properly reducing downtime.Malfunctions of controls or equipment down time may affectproductivity of maintenance staff.
Building & Equipment Esthetics - Enhances company care image.Recommendations documented may alert staff of potential buildingcode violations regarding prior installation of equipment.
Service & Repair
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 46/49
C-Tec is proud to offer you exiblePreventative Maintenance Programs
to meet your needs today!
SILVER PROGRAM
Includes: up to (37) point on site inspection and lubrication of waste equipment
per the manufactures recommendation and in compliance with ANSI Standardsand 10% discount on all additional service work
GOLD PROGRAM
Includes: up to (37) point on site inspection and lubrication of waste equipmentper the manufactures recommendation and in compliance with ANSI Standardsand one (1) annual oil change with Dextron III and 10% discount on alladditional service work
GOLD PLUS PROGRAM Includes: up to (37) point on site inspection and lubrication of waste equipmentand odor control system per the manufactures recommendation and incompliance with ANSI Standards and one (1) annual oil change with Dextron IIIand 10% discount on all additional service work
PLATINUM PROGRAM
Includes: up to (37) point on site inspection and lubrication of equipment per the
manufactures recommendation and in compliance with ANSI Standards and alllabor (excluding parts) within normal business hours for additional service
Preventative Maintenance
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 47/49
Value and Benets of Preventative Maintenance
Preventative Maintenance is based on a pro-active approach that includes detailed wasteequipment inspections, and regular scheduled maintenance, and lubrication, and regular oilchanges that increase the life of waste equipment. Preventative Maintenance will dramaticallyreduce unnecessary service costs, equipment down-time, and potential unsafe conditionsthrough customer awareness and scheduled maintenance.
Asset Management & Productivity
Detailed and accurate (37) point inspection records will potentially prevent unnecessaryservice costs and equipment down-time through customer awareness coupled with a pro-active approach.
Oil and Lubrication
C-Tec Industries uses the highest quality hydraulic oil blends and lubrication; extending the lifeof waste equipment and reducing unnecessary service costs. Typical repair costs can exceedthousands of dollars related to replacing and/or rebuilding hydraulic cylinders and pumps from
lack of preventative maintenance.
OSHA & ANSI Standards
Meet or exceed the required owner responsibility which supports company safety guidelines,reducing the potential for workman’s compensation claims.
Building & Equipment Esthetics
Enhances “Company Care Image” and controls rodent populations in addition to enhancingfacility and equipment security solutions.
Preventative Maintenance
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 48/49
LIMITED WARRANTY
Compactors: C-TEC warrants its Compactors to be free from defects in parts, materials and workmanship• under normal use and service for a period of one (1) year from the date of delivery to the rst purchaser.
This warranty covers all Compactors shipped after January 1, 2006.
Vertical Baler: C-TEC warrants its Vertical Baler products to be free from defects in parts, materials and•
workmanship under normal use and service for a period of one (1) year from the date of delivery to the rst
purchaser. This warranty covers all Vertical Balers shipped after January 1,2006.
Odor Neutralizer: C-TEC warrants its Odor Neutralizer products to be free from defects in parts, materials•
and workmanship under normal use and service for a period of one (1) year from the date of delivery to therst purchaser. This warranty covers all Odor Neutralizer products shipped afterJanuary 1, 2006.
Containers: C-TEC warrants its Containers to be free from defects in parts, materials and workmanship•under normal use and service for a period of one (1) year from the date of delivery to the rst purchaser.
This warranty covers all Containers shipped after January 1, 2006.
Lifts: C-TEC warrants its Rotary Lifts to be free from defects in parts, materials and workmanship under •
normal use and service for a period of two (2) years from the date of delivery to the rst purchaser. This
warranty covers all Rotary Lifts shipped after January 1, 2006.
Totes / 2-Wheel Carts: C-TEC offers no warranty on Totes whether expressed or implied, whether for •
merchantability or tness for a particular purpose, or otherwise, other than those required by law.
Waste Watcher: C-TEC warrants its Waste Watcher products to be free from defects in parts, materials and•
workmanship under normal use and service for a period of one (1) year from the date of delivery to the rst
purchaser. This warranty covers all Waste Watcher products shipped afterJanuary 1, 2006.
C-TEC warrants its Service & Repairs to be free from defects in parts, materials and workmanship under normal use and service for a period of ninety (90) days from the date of completion. This warranty covers all Service & Repairs completed after January 1, 2006.This warranty is expressly limited to the repair or replacement of any component or part of any Service & Repairs completed by C-TECwhich is proven to C-TEC’s satisfaction to have been defective in material or workmanship. This warranty shall not apply to a productupon which repairs or alterations have been made unless authorized in writing by C-TEC. Any improper use, negligence , accident,substitution of parts not approved by C-TEC, and/or modications other than those done by C-TEC or as authorized in writing by C-TEC
shall void this warranty. C-TEC assumes no liability for any incidental, consequential, direct or indirect damages, losses or delaysincluding, but not limited to, loss of prots, product or time. C-TEC, whose policy is one of continuous improvement, reserves the right to
improve its products through changes in design or materials as it may deem desirable without obligation to incorporate such changes inproducts of prior manufacture.The above limited warranty supersedes and is in lieu of all other express or implied warranties, including,but not limited to, any implied warranties of merchantability or tness. No employee or any other representative of C-TEC is authorizedto change this limited warranty or to grant any other warranty.
For specic warranties per model, please consult our website www.c-tecinc.com
or your customer service representative.
Warranty
INDUSTRIES, INC.
Waste Management Systems & Service
TECCorporate Ofce PH: 866-622-CTEC (2832)
Chicago, Illinois www.c-tecinc.com
7/27/2019 C-Tec Product Catalog
http://slidepdf.com/reader/full/c-tec-product-catalog 49/49
Purchasing
There are many options
for acquiring our products.
Leasing w/ Option to Buy •
Renting •
Cash Purchase•
We accept Discover, American•
Express, Visa and Mastercard
top related