catalyst baskets - snap-tite...tel: +82 2 559 0400 parkerkr@parker.com kz – kazakhstan, almaty...

Parker Autoclave Engineers has two catalyst baskets available for their Mini-Reactors, the GLS and GGS.

The spinning Dispersimax™ catalyst basket impeller is designed for gas/liquid/solid (GLS) phases where the catalyst cannot be suspended or the researcher wants the catalyst in a basket. If the process is gas/gas/solid (GGS) work, then use the GGS basket impeller attached to a solid shaft with no Dispersimax™ features.

The Dispersimax™-GLS spinning catalyst basket impeller, apart from being a catalyst basket, works exactly as a standard Dispersimax™, allowing gas to be drawn down the hollow shaft and to promote a positive flow through the hole in the impeller for dispersion. This will allow the catalyst contained to have a positive flow of gas over it, or entrained. It also offers the effect of re-circulating the gas again down the shaft. This spinning basket developed for the Mini-reactor, has a mesh size as small as 8 micron and a volume between 1-1.5 ml. However, Parker Autoclave Engineers can custom design this to make it available for any reactor that uses a Dispersimax ™ impeller. This feature allows the researcher to screw a new basket into the MagneDrive® shaft to replace the existing impeller, very easy and attractive option for any research where a catalyst cannot be suspended or is too fine.

The Gas/Gas/Solid (GGS) spinning catalyst basket impeller is designed only for single phase applications or gases, is to be used with a solid shaft, and screws directly onto the MagneDrive® shank. The profile of the basket has a small annulus or space between the mesh of 1-2 mm from either 8 micron up to 20 micron or larger mesh sizes. The cover has holes which allow the gases to be drawn into the basket area and force a positive flow over the catalyst area suspended within the annulus. This effective motion realizes activation of the gases by the catalyst and any gas is re-drawn and entrained due to the flow path and features of the basket impeller.

Parker Autoclave Engineers has been at the forefront of development of reactors and products to support the development of new catalyst and processes through tried and tested systems, catalyst baskets and other associated equipment and approaches to support the researcher’s needs.

For more information, please contact Parker Autoclave Engineers on the web at www.AutoclaveEngineers.com or by phone at 814 860-5700.

Catalyst BasketsGas/Liquid/Solid (GLS)Gas/Gas/Solid (GGS)

Gas/Liquid/Solid (GLS)

Gas/Gas/Solid (GGS)

Parker Worldwide

AE – UAE, DubaiTel: +971 4 8875600parker.me@parker.com

AR – Argentina, Buenos AiresTel: +54 3327 44 4129falecom@parker.com

AT – Austria, Wiener NeustadtTel: +43 (0)2622 23501-0parker.austria@parker.com

AT – Eastern Europe, Wiener NeustadtTel: +43 (0)2622 23501 970parker.easteurope@parker.com

AU – Australia, DandenongTel: +61 (0)3 9768 5555customer.service.au@parker.com

AZ – Azerbaijan, BakuTel: +994 50 2233 458parker.azerbaijan@parker.com

BE/LX – Belgium, NivellesTel: +32 (0)67 280 900parker.belgium@parker.com

BR – Brazil, Sao Jose dos CamposTel: +55 12 4009 3504falecom@parker.com

BY – Belarus, MinskTel: +375 17 209 9399parker.belarus@parker.com

CA – Canada, Grimsby, Ontario Tel +1 905-945-2274ipd_canada@parker.com

CH – Switzerland, EtoyTel: +41 (0) 21 821 02 30parker.switzerland@parker.com

CL – Chile, SantiagoTel: +56 (0) 2 2303 9640falecom@parker.com

CN – China, ShanghaiTel: +86 21 2899 5000INGtechnical.china@parker.com

CZ – Czech Republic, KlecanyTel: +420 284 083 111parker.czechrepublic@parker.com

DE – Germany, KaarstTel: +49 (0)2131 4016 0parker.germany@parker.com

DK – Denmark, BallerupTel: +45 43 56 04 00parker.denmark@parker.com

ES – Spain, MadridTel: +34 902 33 00 01parker.spain@parker.com

FI – Finland, VantaaTel: +358 (0)20 753 2500parker.finland@parker.com

FR – France, Contamine s/ArveTel: +33 (0)4 50 25 80 25parker.france@parker.com

GR – Greece, AthensTel: +30 210 933 6450parker.greece@parker.com

HU – Hungary, BudapestTel: +36 1 220 4155parker.hungary@parker.com

ID – Indonesia, TangerangTel: +62 (0)21 7588 1906parker.id@parker.com

IE – Ireland, DublinTel: +353 (0)1 466 6370parker.ireland@parker.com

IN – India, MumbaiTel: +91 22 6513 7081-85

IT – Italy, Corsico (Ml)Tel: +39 02 45 19 21parker.italy@parker.com

JP – Japan, TokyoTel: +(81) 3 6408 3900infophj@parker.com

KR – South Korea, SeoulTel: +82 2 559 0400parkerkr@parker.com

KZ – Kazakhstan, AlmatyTel: +7 7272 505 800parker.easteurope@parker.com

LV – Latvia, RigaTel: +371 6 745 2601parker.latvia@parker.com

MX – Mexico, TolucaTel: +52 722 275 4200contacto@parker.com

MY – Malaysia, SelangorTel: +603 784 90 800parkermy@parker.com

NL – The Netherlands, OldenzaalTel: +31 (0)541 585 000parker.nl@parker.com

NO – Norway, StavangerTel: +47 (0)51 826 300parker.norway@parker.com

NZ – New Zealand, Mt WellingtonTel: +64 9 574 1744

PL – Poland, WarsawTel: +48 (0)22 573 24 00parker.poland@parker.com

PT – Portugal, Leca da PalmeiraTel: +351 22 999 7360parker.portugal@parker.com

RO – Romania, BucharestTel: +40 21 252 1382parker.romania@parker.com

RU – Russia, MoscowTel: +7 495 645-2156parker.russia@parker.com

SE – Sweden, SpångaTel: +46 (0)8 59 79 50 00parker.sweden@parker.com

SG – Singapore,Tel: +65 6887 6300parkersg@parker.com

SK – Slovakia, Banská BystricaTel: +421 484 162 252parker.slovakia@parker.com

SL – Slovenia, Novo MestoTel: +386 7 337 6650parker.slovenia@parker.com

TH – Thailand, BangkokTel: +66 2 186 7000phthailand@parker.com

TR – Turkey, IstanbulTel: +90 216 4997081parker.turkey@parker.com

06-1189BE May2014© 2014 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation

WARNINGFAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,

PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection

of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of SaleThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be

governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request).

ISO-9001 Certified

Caution! Do not mix or interchange parts or tubing with those of other manufacturers. Doing so is unsafe and will void warranty. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are not designed to work with common commercial instrument tubing and will only work with tubing built to Parker Autoclave Engineers AES Specifications. Failure to do so will void warranty.

Instrumentation Products DivisionAutoclave Engineers Operation8325 Hessinger DriveErie, PA 16509-4679Tel: 814 860 5700Fax: 814 860 5811www.AutoclaveEngineers.com

Parker Hannifin Manufacturing Ltd.Instrumentation Products Division, EuropeIndustrial Estate WhitemillWexford, Republic of IrelandTel: 353 53 914 1566Fax: 353 53 914 1582

Instrumentation Products DivisionAutoclave Engineers Operation, Houston15340 Vantage Parkway, EastHouston, TX 77032Tel: 281 987 3828Fax: 281 987 2318

Parker Hannifin Manufacturing Ltd.Instrumentation Products Division, EuropeRiverside Road, Pottington Business ParkBarnstaple, UK, EX31 1NP, UKTel: 44 1271 313131Fax: 44 1271 373636

TW – Taiwan, TaipeiTel: +886 2 2298 8987enquiry.taiwan@parker.com

UA – Ukraine, KievTel: +380 44 494 2731parker.ukraine@parker.com

UK – United Kingdom, WarwickTel: +44 (0)1926 317878parker.uk@parker.com

USA – IPD, HuntsvilleTel: +1 256 881 2040ipdcct@parker.com

USA – Autoclave Engineers, ErieTel: +1 814 860 5700ipdaecct@parker.com

VN – Vietnam, Hochi Minh City Tel: +84 (0)8337 546 51parker_viet@parker.com

ZA – South Africa, Kempton ParkTel: +27 (0)11 961 0700parker.southafrica@parker.com