ch - 6.3 additional devicesxxx

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 1/25

Additional devices

Lamp HolderCeiling Rose

Soket Alur KeluarSuis

Penyambung dan PenggandingKotak sambungan

PenyesuaiKabel

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 2/25

Definition – devices that is use in electrical wiring but not using current such as ;ros ceiling rose,lamp holder,box connection,outlet socket,penyesuai,connector,pengganding,cct breaker,palam

except lamp, motor, fan etc.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 3/25

1. Ceiling Rose

•. Definition – The place forending

point

•. i.e. flexible cable connected tothe load; lamp & fan.

•. 3 types – 2 plat, 3 plat & 4plat

Made of plastic @ bakelit.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 4/25

Click to edit Master text stylesSecond level

● Third level● Fourth level

●

Fifth level

Click to edit Master text stylesSecond level

● Third level● Fourth level

●

Fifth level

2

Click to edit Master text stylesSecond level

● Third level● Fourth level

● Fifth level

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 5/25

Click to edit Master text stylesSecond level

● Third level● Fourth level

● Fifth level

IEE Regulation :-1.553-19 Ros siling tidak dibenarkan utk kegunaan di

pemasangan yg lebih drpd 250V.2. 553-20 Bersama2 dgn ros siling tak boleh dipsngkan

lebih drpd satu keluaran kord mudah lentur kecuali

kalau ros siling itu dibuat khas utk berbilang keluaran.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 6/25

Lamp Holder

Definition – Hold the lamp whichmade easy installation of lampto the power supply.

4 types of lamp holder :-

a. Pangkal kilas, skru Edison,skru Goliath & pin.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 7/25

Click to edit Master text stylesSecond level

● Third level● Fourth level

●

Fifth level

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 8/25

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 9/25

IEE Regulation :-1. 553-15 Lamp holder berfilamen hanya digunakan utklitar yg dibekalkan oleh voltan tidak lebih 250V.

2. 553-14 Lamp holder tidak boleh disambung kemana2litar yg mempunyai nilai kadaran pelindung arus lebih ygmelebihi nilai yg terdapat dlm Jadual.

3. 533.18 Pd sentuhan tengah samada lamp holder Skru

Edison type @ pangkal kilas yg disambung ke bekalan ygmempunyai litar sistem TN @ TT, sentuhan luar @sentuhan berskru itu hendaklah disambungkan kepengalir neutral.

4. 471-38 Di bilik yg mempunyai kolah tetap @ airpancut, bhgn pemegang lampu hendaklah berada pd

jarak 2.5m dr kolah @ air pancut itu iaitu diselebungkandgn bhn penebat. Jenis pangkal kilas (B22) hendaklahdipasangbersama pelindung pengadang mengikut BS5042. Sbg pilihan lampu yg berpenutup sepenuhnya boleh

juga digunakan.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 10/25

Click to edit Master text stylesSecond level

● Third level● Fourth level

● Fifth level

Click to edit Master text stylesSecond level

● Third level● Fourth level

● Fifth level

Pemeganglampu

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 11/25

Outlet Socket (Soket Alur Keluar)

Female connection point that is assemble tothe fix intallation.Outlet socket able to receive AC Cordconnect to equipment.

Outlet rate based on British Standard (BS) –2A, 5A,13A, 15A & 30A (common use) & 16A,32A, 63A ( industry).

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 12/25

Structure

Outlet socket base are made off tembikar,

kaca bakelit, plastik @ strong insulatedmaterial.Socket gives 2, 3 & 4 connection point.

Types of O/S (BS) Nominal CurrentBS 1363 13ABS 546 2A, 5A, 15A, 30ABS196 5A, 15A, 30ABS 1778 15ABS 4343 16A, 32A, 63A,

125A

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 13/25

Click to edit Master text stylesSecond level

● Third level● Fourth level

● Fifth level

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 14/25

SwitchMechanical control (Open & close) for electrical

circuit in mechanical method either direct contact@ via intermediate rope @ tombol pemetik @tangkai at the nominal current cct.

Should be able to operate in abnormal conSuisjuga hendaklah mampu menahan keadaantertentu misalnya arus lebih akibat beban ygberlebihan @ litar pintas.

Terdpt berbagai2 bentuk & ragam suis antaranyatermasuklah suis satu hala, perantaraan, 2kutub, suis 2 kutub 2 hala & suis 3 kutub. Suis2ini dibuat dlm pelbagai rupa & kadaran arusmengikut kehendak penggunaannya.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 15/25

Switch Types

Based on :-

i. Pemetik @ tangkai

ii. Internal operation

iii. Function

iv. Installation @ construction

a. Tangkai @ Pemetik

i. Tangkai togol – D.C. current

ii. Bertali – For lamp control @ equipment that aredanger to operate in direct way @ too far for user toreach.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 16/25

iii. Button switch – For immediateoperation. i.e. motor control, bus bell ring

iv. Tombol – operate in rotating way i.e.

fan speed controller.

vi. Key – security; car @ to avoidinterruption in electrical installation work.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 17/25

b. Function – basic; open & close cct.

Click to edit Master text stylesSecond level

●

Third level● Fourth level● Fifth level

To control 1 @ more lamp in lamp final cct @

regulator ceiling fan. Switch connected to Life.To control lamp @ load that in 2 separated location.Optional switch for 2 cct path.

To control lamp @ load from 3 @ more location.

To open 2 pole supply cct. i.e main switch for user control.

To give cct track selection ability.

Same as no. 4. The different – have 2 switch.

To open 3 pole supply cct. i.e. open supply cct for 3 phase motor.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 18/25

c. Internal Operation

- The switch connection method; fast, slow, direct etc.

- Operating different determine the supply type & load that can be

use by the switch.1. A.C. Switch

- For lamp control cct, it use fast connection & slow breaker type.

- The switch gap - small.

- Slow breaker…small gap…??? Avoid spark.

- Cth : Suis celah mikro (6 mm – gap)

Click to edit Master text styles

Second level● Third level

● Fourth level● Fifth level

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 19/25

2. D.C. Switch

- A.C. switch & D.C. switch – different – why??

- Switch operate in mechanical way between fix & movingconnector (using spring)

- D.C. – constant – receive max.current.

- A.C. – not constant; current increase follow the freq.

- Need to use fast connection & fast breaker

switch type.

- Example : Suis Bilah Pisau

- Nowadays, it’s use only in lab for battery @ low AC voltage.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 20/25

3. Load Inductance Switch

- Same requirement with A.C. - fast

connection & slow breaker type.- If use fast breaker – high self inductance

voltage occur because of decrease of flux &

pemotongan flux when the switch is break infast way.

- To avoid tindak balas aruhan diri that willfeed back in user load cct.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 21/25

Installation @ construction

- Made in variety structure depend to the

location of installation location.i.e surface switch for surface wiring.

half surface switch for surface wiring.

water resistance switch

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 22/25

Selection Switch

Arus ketahanan suis hendaklah sekurang2nya sama

dgn arus litar.Jika suis biasa hendak digunakan sbg suis pengawallampu nyahcas, suis itu mesti mempunyai kadar 2kali ganda arus biasa yg diguna bagi litar itu.

Suis hendaklah sesuai dgn tempat, pendawaian & keadaan suhu sekeliling ia hendak dipasang.

Suis hendaklah sesuai utk menjalankan sesuatu

fungsi & bentuk kawalan yg dikehendaki.

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 23/25

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 24/25

Connector & coupling for cable

Connection box – cable connection box.

Use when cct to be divided into branch.i.e. Electrical power base from one house to theothers.

Click to edit Master text stylesSecond level

● Third level● Fourth level

● Fifth level

8/14/2019 Ch - 6.3 Additional Devicesxxx

http://slidepdf.com/reader/full/ch-63-additional-devicesxxx 25/25

Adjuster

Power output to lamp @ outlet socket.

It’s consist of 2,3,4 @ 5 outlet depand to the type & structure.

Click to edit Master text styles

Second level● Third level

● Fourth level● Fifth level