chapter fifteen - ntut.edu.twchpro/chem/chap15.pdf · acid and corresponding conjugate base. added...

1

Chapter Fifteen:

APPLICATIONS OF AQUEOUSEQUILIBRIA

2

Contentsp680

3

15-1 Solution of Acids or BasesContaining a Common Ion

p681

Le Chatelier’s Principle

Common ion effect

4

The equilibrium concentration of OH- ionsis reduced by the common ion effect.

p682

The position of ammonia-waterequilibrium is shifted to the left.

Ex 15.1 Acidic Solutions ContainingCommon Ions

p682

Calculate [H+] and the percent of HF in a solution

containing 1.0 M HF (Ka = 7.2 x 10-4) and 1.0 M NaF.

Solution:

1.0 M HF [H+] = 2.7 x 10 –2 M

The percent dissociation of 1.0 M HF is

2.7% ( 2.7 x 10-2/1.0)

6

15-2 Buffered Solutionsp684

The most important application of acid-base solutions

containing a common ion is for buffering. A buffered

solution is one that resists a change in its pH when either

hydroxide ions pr protons are added. The most important

practical example of a buffered solution is our blood, which

can absorb the acids and bases produced in biologic reactions

without changing its pH. A constant pH for blood is vital

because cells can survive only in a very narrow pH range.

Ex 15.2 The pH of a Buffered Solution I

Solution:

p684

The major species in the the solution are

HC2H3O2, Na+, C2H3O2-, and H2O

A buffered solution contains 0.50 M Acetic acid (HC2H3O2,

Ka = 1.8 x 10-5) and 0.050 M sodium acetate (NaC2H3O2).

Calculate the pH of this solution.

weak neither base very weakacid acid nor (conjugate baseor

base of HC2H3O2)base

8

p684

9

Solving Problems with Buffered Solutions

p687

10

Buffering: How Does It Work?p687

11

Buffering: How Does It Work? p688

12

Ex 15.4 The pH of a Buffered Solution II p689

Calculate the pH of a solution containing 0.75 M lacticacid (ka = 1.4 x 10-4) and 0.25 M sodium lactate. Lacticacid ) HC3H5O3) is a common constituent of biologicsystem. For example, it is found in milk and is presentin human muscle tissue during exertion.Solution:

13

Buffers contain relatively large amounts of weakacid and corresponding conjugate base.

Added H+ reacts to completion with theconjugate base.

Added OH- reacts to completion with the weakacid.

The pH is determined by the ratio of theconcentrations of the weak acid and conjugatebase.

p692Summary of the Most ImportantCharacteristic of Buffered Solutions

14

15-3 Buffering Capacityp693

The capacity of a buffered solution isdetermined by the magnitudes of [HA] and [A-]

Ex15.7 Adding strong Acid to a BufferedSolution II

Solution:

For A:

Initial:

For B:

The optimal buffering system has a

pKa value close to the desired pH.

p696

16

15-4 Titrations and pH Curves p696

Strong acid-Strong Base Titrations

A. No NaOH has been added.

[H+] = 0.200 M pH = 0.699

B. 10.0 mL of 0.100 M has been added.

H+(aq) + OH-

(aq) → H2O(l)

pH = - log(0.15) = 0.82

17Na+, NO3-, H2O

C. 20.0 mL (total) of 0.100 M NaOH has been added.

pH = 0.942

D. 50.0 mL (total ) of 0.100 mL M NaOH has been added.

Preceding exactly as for points B and C, the pH is foundto be 1.301.

Enough OH- has been added to react exactly with H+

from the nitric acid. This is the stoichiometric point, orequivalence point, of the titration. At this point the majorspecies in solution are

18

Titration p696

F. 150.0 mL (total) of 0.100 M NaOH has been added.

pH = 12.40

Proceeding as for point F,the pH is found to be 12.60

G. 200.0 mL (total) of0.100 M NaOH hasbeen added.

19

Titration curve p699

Figure 15.1The pH curve for the titration of 50.0 mL of 0.200

M HNO3 with 0.100 M NaOH. Note that the equivalence

point occurs at 100.0 mL of NaOH added, the point where

exactly enough OH- has been added to react with all the H+

originally present. The pH of 7 at the equivalence point is

characteristic of a strong acid-base titration.

20

Neutralization of a Strong Acid with a Strong Base

21

The pH Curve for the Titration of 50.0 mL of0.200 M HNO3 with 0.100 M NaOH

p699

22

Figure 15.2 The pH Curve for the Titrationof 100.0 mL of 0.50 M NaOH with 1.0 M HCI.

p699

23

Figure 15.3 The pH Curve for the Titrationof 50.0 mL of 0.100 M HC2H3O2 with 0.100M NaOH.

Titrations of Weak Acids with Strong Basesp704

The shapes of the strong and weak acid

curves are the same after the equivalence

points because excess OH- controls the pH in

this region in both cases.

p705

25

Figure 15.4 The pH Curves for the Titrationsof 50.0-mL Samples of 0.10 M Acids withVarious Ka Values with 0.10 M NaOH.

The pH curves for the titrations ofsamples with various Ka

p707

26

Weak Acid - Strong Base Titration

Step 1: A stoichiometry problem (reaction is

assumed to run to completion) then

determine remaining species.

Step 2: An equilibrium problem (determine

position of weak acid equilibrium and

calculate pH).

27

Figure 15.5 The pH Curve for the Titrations of100.0mL of 0.050 M NH3 with 0.10 M HCl.

p711

28

15-5 Acid-Base Indicators

Marks the end point of a titration by changing color.

The equivalence point is not necessarily the same

as the end point.

indicator

p711

29

The acid and base forms of the indicatorphenolphthalein. The indicatorphenolphthalein is colorless in acidicsolution and pink in basic solution.

Figure 15.6

Relative Solubilities

p721

CuI(s)

CaSO4(s)

16105.1 spK

12100.5 spK

5101.6 spK

AgI(s)

15.6 Solubility Equilibria andthe Solubility Product

31

Common Ion Effect p722

Ex 15.15 Solubility and Common IonsCalculate the solubility of solid CaF2 (Ksp = 4.0 x 10-11) in a

0.025 M NaF solution.Solution:

Thus mol solid CaF2 dissolves per liter of the0.025 M NaF solution.

We will now see what happen the water containsan ion in common with the dissolving salt.

8104.6

15-7 Precipitation and QualitativeAnalysis

p725

Ex 15.16 Determining Precipitation ConditionsA solution is prepares by adding 750.0 mL of 4.00 x 10-3

M Ce(NO3)3 to 300.0 mL of 2.00 x 10-2 M KIO3. Will

Ce(IO3)3 (Ksp = 1.9 x 10-10) precipitate from this solution?

Solution:

Ex 15.18 Selective Precipitation p728

A solution contains 1.0 x 10-4 M Cu+ and 2.0 x 10-3 MPb2+. If a source of I- is added gradually to thissolution, will PbI2 (Ksp = 1.4 x 10-8) or CuI ( Ksp = 5.3 x10-12) precipitate first? Specify the concentration of I-necessary to begin precipitation of each salt.Solution:

As I- is added to the mixed solution, CuI willprecipitate first, since the [I-] required is less.

15-8 Equilibria Involving Complex Ions

]][NH)[Ag(NH])[Ag(NH

102.833

2332

K

mL)(200.0)mL)(2.0(100.0

][NH 03M

p731

Ag+ + 2NH3 → Ag(NH3)2+

Before reaction: 5.0 x 10-4 M 1.0 M 0 M

After reaction: 0 1.0-2(5.0 x 10-4) = 1.0 M 5.0 x 10-4 M

mL)(200.0)10mL)(1.0(100.0

][Ag3

0M

35

Complex Ion Equilibria p731

36

Nickel(II) Complexes

37

Ex 15.19 Complex Ions

8132

232 104.7)OAg(SOSAg K

Calculate the concentrations of Ag+, Ag(S2O3)-, and

Ag(S2O3)3- in a solution prepared by mixing 150.0 mL of

1.00 x 10-3 M AgNO3 with 200.0 mL of 5.00 M Na2S2O3.

The stepwise formation equilibria are:

42

3232

23232 109.3)OAg(SOS)OAg(S K

p733

Solution:

p733

39

Complex Ions and Solubility p734

The solubility in pure water is

40

Separation Scheme