cimt methods brochure 6-2-12 - sgs 台灣/media/global/documents/brochures/sgs-cimt-m… · surface...
Post on 08-Mar-2018
238 Views
Preview:
TRANSCRIPT
Safety and quality are among the demands placed on modern materials used in the automotive industry. Continuous improvements in the products and components are the declared objectives of all car manufacturers and a justified desire of end consumers. These require continuous control during the development of parts and system components, beginning with the raw material right through to the end product itself. The close collaboration between qualified, independent testing laboratories and automotive component suppliers guarantees that the car manufacturers' requirements in terms of initial sample testing and serial sample testing are fulfilled.
Qualified solutions are our business
With many years of experience in the field of analytics behind it, SGS guarantees you security and reliability so that you can focus on your core business. SGS has clustered many different functional competencies for the automotive industry in CTS Automotive. Functional and methodological expertise in several functional disciplines is necessary to offer solutions from one source - no matter how complex the problem is.
SGS CTS Automotive has a flexible accreditation - suited to every new method that is introduced.
We are accepted by major automotive OEMs, which is reflected in our numerous approvals and recommendations.
CAR INTERIOR MATERIAL TESTING METHODS
DESCRIPTION
Chrome-Plated Surfaces; Determination of Potential differences and Layer Thickness of Nickel Coatings
Vehicle Parts Testing of Resistance to Environmental Cycle Test (+80/-40) °C
Body and Add-on Parts; Corrosion Test
Surface Paint, Varnishes; Resistance to Stone Impact (VDA Method)
PVC and PVC Mixed Polymer; Thermal Stability Test
Non-Metallic Materials Exposure Test of Passenger Compartment Components
Non-Metallic Materials Exposure Test for Determining the Tackiness of Polypropylene Parts
Non-Metallic Materials; UV Radiation on Thermoplastic Material, Outside, in Sun
Clear Coat for Dual-Layer Metallic Paint Coatings; Testing for Resistance to Cracking
Fahrzeugteile; Prüfung der Klimawechselfestigkeit
Non-Metallic Planar Materials; Floating Roller Peel Test
Non-Metallic Materials for Interior Trim Determining Condensable Constituents (G)
Elastomer-Bauteile; Plastische und elastische Verformbarkeit
Non-Metallic Materials in Automotive Interior TrimDeterminination of organic compounds
Insulating Material; Behavior during Flame Exposure with a Burner; Surface and Edge Flame Exposure
Components in Passenger CompartmentOdor Test
METHOD
PV 1065
PV 1200
PV 1210
PV 1213
PV 1300
PV 1303
PV 1306
PV 1323
PV 1502
PV 2005
PV 2034
PV 3015
PV 3307
PV 3341
PV 3357
PV 3900
VOLKSWAGEN AUDI
Non-Metallic Materials Weathering in Dry, Hot Climate
Non-Metallic Materials Weathering in Moist, Hot Climate
Amine Emissions from PUR Flexible Foam; Indicator Method
Determining Organic Emissions from Components for the Passenger Compartment of Motor Vehicles Emission Test
Plastic Interior Components; Testing of Scratch Resistance
Surfaces in the Vehicle Interior; Test of Resistance to Creams and Lotions
Determining/Evaluating the Corrosion Effect of Elastomers on Electrolyte Copper
Scrub Resistance of High-Gloss Surfaces in the Vehicle Interior
Paint coatings on exterior plastic parts - Requirements
Paint coating on materials used in the vehicle interior trim - Requirements
Labels Self-Adhesive, Material Requirements
ABS and PC Polymer Blends Material Requirements
"Nonwoven Fabric, Thermoplastically Bonded Material Requirements
PA6, glass-fiber reinforced, finished parts - Material requirements
CFRP Components; Material Requirements and Componet Requirements
PUR Flexible Foam for Vehicle Seats Material Requirements
Engine Encapsulation and Stone Guard Underbody Applications, Test Scope for Components
PMMA, High Gloss Trims for the Exterior, Material Requirements
PA66, Glass Fiber-Reinforced, for Finished Parts Carrying Coolant; Material Requirements
Soft PVC, Weather-Proof; Material Requirements
ABS graft polymer, finished parts - Material Requirements
Chrome-Plated Plastic Parts - Material Requirements
High-Density Polyethylene; Materials Requirements
Polyamide 6, Finished Part; Material Requirements
Materials for Vehicle Interiors; Burning Behavior; Material Requirements
Schaumstoff-Klebeband, beidseitig klebend; Werkstoffanforderungen
Foamed Leatherette with Blend-Knit Fabric; Material Requirements
PP/EPDM/PE Polymer Blend, Finished Parts; Material Requirements
PUR Integral Foam for Steering-Wheel Coating; Material Requirements
Polypropylene, Elastomer-Modified,Talc- Modified or Mineral-Modified; Material Requirements
ZSB Instrumententafel und Kniefänger, Werkstoffanforderungen
ASA Graft Polymer; Material Requirements
POM; Material Requirements
Elastomers; Material Requirements and Testing
Polypropylene, Finished Parts Material Requirements
PV 3929
PV 3930
PV 3937
PV 3942
PV 3952
PV 3964
PV 3974
PV 3975
TL 211
TL 226
TL 52038
TL 52231
TL 52411
TL 52440
TL 52642
TL 52653
TL 52660
TL 52671
TL 52682
TL 526
TL 527
TL 528
TL 533
TL 534
TL 1010
TL 52018
TL 52028
TL 52035
TL 52045
TL 52283
TL 52296
TL 52311
TL 52476
VW 2.8.1
VW 44045
METHOD DESCRIPTION
PV 3905
PV 3906
PV 3922
PV 3925
Organic Materials; Ball Drop Test
Non-Metallic Planar Materials; Testing of Abrasion Behavior
Planar Fabrics and Molded Parts; Oil- and Water-Repellemt Behaviour
Determining Organic Emissions from Componentsfor the Passenger Compartment of Motor VehiclesEmission Test
BMW
DESCRIPTION
Sun cream resistance of painted partsin the interior
Formaldehyde emission from nonmetallicmaterials and components, determined by HPLC
Determination of multi impact stone chip resistance
Reflectometer Value (Gloss)
Cross hatch testing
Adhesion test at low temperature by bowl drop test on process materials
Condensation Water Constant Atmosphere Test
Paint Compatibility Test
Saltspray-Test
Abrasion Test of Leather by Means of a Ball Plate
Staining Behavior and Cleaning Ability of Leather
Universal Scratch Tester
Bending stiftness; Two-point procedure
Taber-Abrasion Test Leather
Accelerated weathering crack stability
Aging Resistance Test
Accelerated weathering colour stability
Abrasion Resistance using the Abrex Test Equipment
Hydrolysis Test
Coatings of parts und made of metallic materials by means of organic materials; Requirements and test
Requalification of product and process at thesupplier; Process, checklist
Marking of parts with trademark and part identification data
Marking of Parts; Trademark for Marking of Parts
Marking of Parts; Marking of Materials
Marking of parts Marking with date of manufacture
Grain process for injection molded componentswith visible plastic surfaces
METHOD
AA-0053
AA-0061
AA-0079
AA-0101
AA-0180
AA-0187
AA-0213
AA-0244
AA-0324
AA-0412
AA-0419
AA-0546
AA-0551
AA-0564
AA-0235
AA-P 275
AA-P 288
AA-P 296
AA-P 308
GS 90011
GS 90018
GS 91001
GS 91002
GS 91003
GS 91004
GS 91009
METHOD DESCRIPTION
Polyamide 6 Finished Parts in the Passenger Compartment Material Requirements
Bonded Coating-Covered Body Seals; Requirements and Tests
Foamed Leatherette; Material Requirements
PA66 for Finished Parts Outside the Vehicle Interio; Material Requirements
Emission behavior of components in passenger compartment
VW 50125
VW 50129
VW 50132
VW 50133
VW 50179
VW 50180
VW 50185
VW 50190
VW 50195
VW 80101
Components in Passenger Compartment; Emission Behavior
Vehicle Components; Resistance to Open Air Weathering
Interior Trim Components; Metrological Evaluation of Color and Gloss Level Visual Evaluation of Chrome Surfaces
Colorimetric Evaluation of Automobile Paint Coatings
Electrical and Electronic Assemblies in Motor Vehicles; General Test Conditions
Circuit carriers in motor vehicles Dewing test
Circuit carriers in motor vehicles Qualification of conformal coatings
Trim parts with PVC-Slush coating Delivery and test conditions
Emissions measurement in SHED chambers Determination of volatile, organic emissions from fuel carrying or fuel vapor carrying components
Emissions measurement in SHED chambers Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel
Emissions measurement with air exchange in atesting chamber Determination of volatile, organic emissions from components, semi-finished products and materials
Coatings on plastic parts Electroplated plastic parts Requirements, tests
Elastomers Determination of the resistance to test-blow by
Decorative and accentuated surfaces in the interior Releases, Quality assurance
Surface test of motor vehicle interior materials Manual abrasion test
Surface test of motor vehicle interior materials Finger nail test
Surface test of motor vehicle interior materials Shoe sole test
Surface test of motor vehicle interior materials Color abrasion behavior
Surface test of motor vehicle interior materials Resistance to cleaning agents
Surface test of motor vehicle interior materials Soiling behavior and cleaning ability
Surface test of motor vehicle interior materials Drop test
Surface test of motor vehicle interior materials Determination of the scratch inclination
Surface test of motor vehicle interior materials Scratch test
Manual Abrasion test of Motor Vehicle Interior Materials
Polyurethane integral foam in RRIM procedure Delivery conditions
Dynamic mechanical analysis (DMA)on polymers
Datermination of berning behaviour to automotive interior trim materials
Coatings on plastic partsPainted plastic parts in exterior, interior and engine compartment Test scope, sample preparation
Coatings on plastic parts Painted plastic parts in exterior, interior and engine compartment Test certificates
Trim parts with PUR-RIM-Overmould coating Delivery and test conditions
Trim parts with IMC-TPU-Slush coating Delivery and test conditions Ausdrucke
Trim parts with IMC-PVC-Slush coating Delivery and test conditions
Closing Plug Fitting plug Types, finishes, testing conditions
Closing plug Paint plug Types, finishes, testing conditions
Self-adhesive lables Requirenments, testings
Self-adhesive decorative and functional foils Requirements, testings
GS 95011-4
GS 95011--5
GS 97012
GS 97014-1
GS 97014-2
GS 97014-3
GS 97017
GS 97018
GS 97033
GS 97034-1
GS 97034-2
GS 97034-3
GS 97034-4
GS 97034-5
GS 97034-6
GS 97034-7
GS 97034-8
GS 97034-9
GS 97034
GS 97035
GS 97036
GS 97038
GS 97045-1
GS 97045-2
GS 97049
GS 97050
GS 97051
GS 97056
GS 97057
GS 97058
GS 97059
GS 93022
GS 93026-1
GS 95003-3
GS 95003-4
GS 95003-4
GS 95003-5
Plastics Pressable Thermoplastics Requirements and testings
Textiles of the vehicle interior Requirements and Testings
Electrical/electronic assemblies in motor vehicles Mechanical requirements
Electrical/Electronic Assemblies in Motor Vehicles Climatic Requirements
Electrical/Electronic Assemblies in Motor Vehicles Climatic Requirements
Electrical/Electronic Assemblies in Motor Vehicles Chemical Requirements
METHOD DESCRIPTION
DAIMLER
DESCRIPTION
Supply Specification; General Technical Delivery Conditions and Test Methods for Interior Equipment Materials and Similar Products
Supply Specification, Flame retardant properties; interior trim parts; Requirements and test specifications
Supply specification - Leather for interior equipment
Supply specification - Artificial leather binding
Supply specification - Woven artificial leather cloth
Supply specification - Films and sheets
Supply specification - Tricot imitation leather
Supply specification - Nonwoven artifical leather
Supply specification - Foamed and compact artificial leather
Supply specification - Scrim fabrics
Supply specification - Deep-drawn sheeting
Supply specification - Foam films and sheeting
Supply specification - Polyolefin film
Supply specification - Polyurethane and other films for sound insulation materials and trim parts
Supply specification - Laminated surface materials for interior applications
Supply specification - Molded skins (spray and powder-cast skins) made of TPU, polyolefine and PVC
Supply specification - Soiling/cleaning of interior equipment parts/materials
Supply specification - Parts made of thermosetting plastics used in engine and assembly areas
Supply Specification Parts Manufactured from Thermoplastics for the Direct and Indirect Areas of the Passenger Compartment, for Passenger Compartment Heating and Ventilation, Paneling and Housings
Supply specification - Thermoplastic parts, reservoirs for brake and windshield washer fluids
Supply specification - Thermoplastic partsfor engine air management
Supply Specification Thermoplastic parts for control elements, bearing elements, fasteners, and spacers
Supply specification - Plastic moldings manufactured from plasticized PVC
Supply Specification Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
Supply specification - Molded parts manufactured from long-fiber-reinforced thermoplastics, hot pressed
Supply specification - Injection moulded parts manufactured from fibre reinforced thermoplastics for structural requirements
®Supply specification - Thermoplastic partsin continuous contact with urea solution AdBlue
Supply specification - Polyurethane foam with large pores
Supply specification - Foam-molded flexible cellularpolyurethane-based materials
Supply specification - Substrate made of reinforced polyurethane foam
METHOD
DBL 5306
DBL 5307
DBL 5310
DBL 5329
DBL 5330
DBL 5333
DBL 5338
DBL 5345
DBL 5348
DBL 5349
DBL 5352
DBL 5353
DBL 5354
DBL 5357
DBL 5361
DBL 5381
DBL 5399
DBL 5401
DBL 5404
DBL 5407
DBL 5408
DBL 5410
DBL 5412
DBL 5416
DBL 5417
DBL 5418
DBL 5419
DBL 5451
DBL 5452
DBL 5453
METHOD DESCRIPTION
GS 97061
PR 303.5
PR 306.4
Structural foam Requirements, testings
Alternating climate test for trim parts
Sun simulation test for trim parts
Supply specification - Parts manufactured from energy-absorbing foams for exteriors
Supply specification - Molded rigid and semi-rigid foams
Supply specification - Light multi-layer sound insulations for internal and external applications
Supply specification - Raw materials for polyurethane foams
Supply specification - Polyurethane integral foam for interior trim parts
Supply Specification Trim and molded padded parts for vehicle interiors (composite parts)
Supply specification - Substrate material in sandwich design
Supply specification - Multi-layer composite film for interior equipment sensor systems
Supply specification - Extruded plastic panels capable of deep drawing
Supply Specification - Plastic components manufactured from recycled materials
Supply Specification; Finished Parts and Semi-Finished Products Made of Organic Polymer Materials; General Conditions and Test Methods
Supply specification - Moulded elastomer parts subject to normal mechanical requirements
Supply specification - Elastomer parts subject to mechanical-dynamic stress, suitable for thermal stressing up to 175 °C
Elastomer parts subject to high and extremely high mechanical-dynamics stress, suitable for thermal stressing up to 100° C
Supply specification - Parts manufactured from thermoplastic polyurethane elastomers (TPU) temperature application range up to 120 °C
Supply specification - Elastomer parts suitable for thermal stressing from 80 to 130 °C, with moderate resistance to lubricants and fuels
Supply specification - Thermoplastic elastomers (TPE)
Supply specification - Elastomer parts suitable for thermal stressing from 70 to 120 °C, with good resistance to lubricants, fuels and coolants
Supply specification - Elastomere parts thermically stressable 120 °C to 140 °C, weathering resistant and moderate resistance to greases and fuels
Elastomer parts heat-tolerant to 120 to 150 degree C, with good resistance to lubricants and fuels
Supply specification - Elastomer parts heat-tolerant for 140 °C to 175 °C, with good resistance to petroleum products
Supply specification - Elastomer parts heat-tolerant for 150 °C to 250 °C, moderately resistant to petroleum-based products
Supply specification - Elastomer parts heat-tolerant to 200 to 275 °C, with good resistance to automotive fuel
Supply specification - Polymer parts with no adverse effect on painting processes
Supply specification - Sealing sections/molded parts manufactured from elastomers, mainly in body areasuitable for short-term thermal loads of 70 °C to 100 °C
Supply specification - Moldings and extrusions manufactured from sponge rubber (foamed elastomers with open and closed cell structure)
Supply specification - Moldings and hoses manufactured from cellular rubber (pored elastomers with closed cells)
Supply specification - Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior
DBL 5461
DBL 5462
DBL 5463
DBL 5467
DBL 5468
DBL 5471
DBL 5472
DBL 5474
DBL 5481
DBL 5490
DBL 5555
DBL 5556
DBL 5557
DBL 5558
DBL 5559
DBL 5561
DBL 5562
DBL 5563
DBL 5564
DBL 5565
DBL 5567
DBL 5568
DBL 5569
DBL 5570
DBL 5571
DBL 5573
DBL 5574
DBL 5575
METHOD DESCRIPTION
DBL 5454
DBL 5455
DBL 5456
DBL 5460
Supply specification - Covered foam
Supply specification - Polyolefin foam
Supply specification - Composite foam blocks forinterior applications foreword
Supply specification - Parts manufactured from energy-absorbing foams for interiors
Supply specification - Velour fabric
Supply specification - Nonwoven micro fiber fabric
Supply Specification - Upholstery plush
Supply Specification - Polyacrylonnitrile velour
Supply specification - Velour carpet
Supply Specification - Upholstery fabric. Mixed weave
Supply specification - Upholstery nettle cloth
Supply specification - Jute fabric
Supply specification - Needlefelt fabrics
Supply specification - Nonwoven fleece
Supply Specification - Synthetic upholstery fabric
Supply Specification - Woven upholstery fabric
Supply Specification - Synthetic upholstery fabric
Supply specification - Woven upholstery fabric
Supply specification - Piping
Supply specification - Tricot tape
Supply specification - Tubular tricot tape
Supply Specification - Tapes
Supply specification – Fully synthetic twisted yarn
Supply specification – Padding
Supply specification - O-rings and molded seals manufactured from elastomers
Supply Specification Coating of plastic parts in vehicle interiors
Supply specification - Coating/painting for parts subject to moderate exposure to corrosion stress
Supply specification - Self-adhesive labels
Supply specification - Electroplated parts manufactured from plastics with metallic coatings
Supply SpecificationGeneral RequirementsEnvironmental protection, hazardous substances, dangerous goods Negative substance list for the selection of materials
Supply specification - Decorative parts in vehicle interiors
DBL 5815
DBL 5816
DBL 5819
DBL 5836
DBL 5853
DBL 5855
DBL 5860
DBL 5864
DBL 5868
DBL 5869
DBL 5881
DBL 5882
DBL 5883
DBL 5884
DBL 5911
DBL 5919
DBL 5937
DBL 5939
DBL 5943
DBL 5955
DBL 6038
DBL 7384
DBL 7392
DBL 8230
DBL 8465
DBL 8585
DBL 9202
DIN EN ISO
DESCRIPTION
Colorimetry - Part 1 - 9
Description of yellowness of near-white or near-colourless materials
Colorimetric evaluation of colour differences of surface colours according to DIN99-formula
Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)
METHOD DESCRIPTION
DBL 5578
DBL 5767
DBL 5768
DBL 5809
Supply Specification - Elastomer parts with anti-friction coating
Supply Specification - Cardboard
Supply Specification - Pressure Moulded Wood Fibre Materials
Supply Specification - Knitted fabrics
METHOD
DIN 5033-1
DIN 6167
DIN 6174
DIN 50958
Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials
Testing of paper and board - Determination of abrasion by the abrasion wheel method
Testing of paper and board - Basic parameters for determination of reflectance factor - Part 1: Measurements made on non-fluorescent specimens Part 2: Measurements made on fluorescent specimens
Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen
Testing of synthetic leather and similar sheet materials; Tear growth test
Testing of plastics sheets; adhesion test
Testing artificial leather and similar sheet materials; determination of the total elongation (statical elongation) and irreversible elongation
Testing of plastic films - Tear test using trapezoidal test specimen with incision
Testing of plastics films - Determination of the thickness by mechanical scanning
Testing of plastic films - Determination of dimensional stability
Testing of plastics; determination of the percentage of styrene in reaction moulding materials based on unsaturated polyester resins; gaschromatography method
Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
Testing of plastics; bending test and impact test on dynstat test pieces
Testing of electroplated plastic parts - temperature change test
Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing
Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
Testing of rubber - Shore A and Shore D hardness test
Testing of rubber - Accelerated ageing
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking
Testing of rubber - Determination of rebound resilience (Schob pendulum)
Determination of low-temperature behaviour of elastomers; principles and test methods
Flexible cellular polymeric materials – Determination of stress-strain characteristics in compressionPart 1: Low-density materials
Testing of flexible cellular materials - Indentation test on finished parts
Testing of plastics; determination of water content by titration according to Karl Fischer
Testing of plastics; determination of the coefficient of linear thermal expansion
Testing of plastics; determination of abrasion, abrasive disk method
Testing of textiles; determination of linear density of single and plied yarns; simple yarns and plied yarns, textured yarns, short length method
DIN 53100
DIN 53109
DIN 53145
(1-2)
DIN 53236
DIN 53350
DIN 53356
DIN 53357
DIN 53360
DIN 53363
DIN 53370
DIN 53377
DIN 53394-2
DIN 53428
DIN 53435
DIN 53496
DIN 53497
DIN 53504
DIN 53505
DIN 53508
DIN 53509 (Teil1-2)
DIN 53512
DIN 53545
DIN EN ISO
3386-1
DIN 53579
DIN 53715
DIN 53752
DIN 53754
DIN 53830-3
METHOD DESCRIPTION
DIN 52347
DIN 52612-2
Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light
Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
Testing of textiles - Coatings and attendant materials - Part 1: Determination of materials soluble in organic solvents
Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
Polyamide tubing for motor vehicles
Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing
Air braking systems; coiled tubing
Air braking systems - Thermoplastic tubing - Part 1: Requirements and tests
Determination of burning behaviour of interior materials in motor vehicles
Determination of the windscreen fogging characteristics of trim materials in motor vehicles
Ageing Automobile Components in Solar Simulation Units
Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version
Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version
Wood-based panels; determination of moisture content; German version
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board; German version
Wood-based panels - Determination of formaldehyde release
Textiles; woven fabrics; construction; methods of analysis; part 2: determination of number of threads per unit length
Textiles - Fabrics - Determination of width and length
Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test
Textiles - Fabrics - Determination of mass per unit area using small samples
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics;
Leather � Chemical tests �Determination of the content of pentachlorophenol in leather
Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified); German version EN 14869-2:2011
Textiles - Tests for colour fastness
Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90° peel
Textiles; test method for nonwovens; part 1: determination of mass per unit area
Environmental testing
Plastics - Determination of water absorption
Plastics; Determination of temperature of deflection under load
Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining
Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration
DIN EN ISO
105-E04
DIN 54278-1
DIN 67530
DIN 73378
DIN 73411-2
DIN 74323
DIN 74324-1
DIN 75200
DIN 75201
DIN 75220
DIN EN 310
DIN EN 317
DIN EN 322
DIN EN 646
DIN EN 717 (Teil1-3)
DIN EN 1049-2
DIN EN 1773
DIN EN 1876
DIN EN 12127
DIN EN 13130-4
DIN EN 14494
DIN EN 14869-2
DIN EN 20105-
(A02-A-03)
DIN EN 28510-1
DIN EN 29073
DIN EN 60068
DIN EN ISO 62
DIN EN ISO 75-
(Teil1-3)
DIN EN ISO 105-A02
DIN EN ISO 105-A03
DIN EN ISO 105-A05
DIN EN ISO 105-E04
DIN EN ISO 105-Z06
DIN 53863-2
DIN 53892-2
Testing of textiles; abrasion test methods for textile fabrics, rotary abrasion test
Testing of textiles; determination of dimensional change of woven fabrics subjected to the repeated attack of moisture an dry air
METHOD DESCRIPTION
DESCRIPTION
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents
Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
Textiles - Standard atmospheres for conditioning and testing
Plastics - Determination of flexural properties
Plastics - Determination of Charpy impact properties
Plastics - Determination of Izod impact strength
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
Plastics - Polyamides - Determination of viscosity number
Plastics - Determination of tensile properties
Celluar plastics and rubbers - Determination of apparent (bulk) density
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
Paints and varnishes - Bend test (cylindrical mandrel)
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
Flexible cellular polymeric materials - Determination of compression set
Cellular plastics and rubbers - Determination of linear dimensions
Plastics Determination of hardness
Rubber- or plastics-coated fabrics - Determination of roll characteristics
Paints and varnishes - Cross-cut test
Leather; Chemical, physical and mechanical and fastness test-Sampling location
Paints and varnishes - Cross-cut test
Leather; Physical and mechanical tests – Determination of thickness
METHOD
DIN EN ISO
105-B06
DIN EN ISO
105-X05
DIN EN ISO
105-X12
DIN EN ISO 139
DIN EN ISO 178
DIN EN ISO 179
(Teil1- Teil2)
DIN EN ISO 180
DIN EN ISO 306
DIN EN ISO 307
DIN EN ISO 527
(Teil1- Teil3)
DIN EN ISO 845
DIN EN ISO 868
DIN EN ISO
1133-1
DIN EN ISO
1172
DIN EN ISO
1183-1
DIN EN ISO 12947-2
DIN EN ISO 1518-1
DIN EN ISO 1519
DIN EN ISO 1798
DIN EN 1811
DIN EN ISO 1856
DIN EN ISO 1923
DIN EN ISO 2039 (Teil 1-2)
DIN EN ISO 2286
DIN EN ISO 2409
DIN EN ISO 2418
DIN EN ISO 2440
DIN EN ISO 2589
DESCRIPTION
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
Flexible cellular polymeric materials – Determinationof stress-strain characteristics in compression
Plastics - Determination of ash
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method
Plastics - Methods of exposure to laboratory light sources
Textiles - Determination of thickness of textiles and textile products
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres
Plastics; determination of matter extractable by organic solvents
Plastics; Determination of puncture impact behaviour of rigid plastics; Part 2: Instrumented impact testing
Corrosion tests in artificial atmospheres - Salt spray tests
Textiles - Determination of permeability of fabrics to air
Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation
Plastics - Differential scanning calorimetry (DSC)
Leather - Test for colour fastness - Colour fastness to cycles of to-and-fro rubbing
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method)
Plastics - Determination of water content
Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography
METHOD
DIN EN ISO
3376
DIN EN ISO
3386
DIN EN ISO
3451-1
DIN EN ISO
22088-3
DIN EN ISO
4892
DIN EN ISO
5084
DIN EN ISO
5470-1
DIN EN ISO
6270-2
DIN EN ISO
6427
DIN EN ISO
6603-2
DIN EN ISO
9227
DIN EN ISO
9237
DIN EN ISO
11341
DIN EN ISO
11357
DIN EN ISO
11640
DIN EN ISO
12945-2
DIN EN ISO
13934-1
DIN EN ISO
13937-2
DIN EN ISO
15512
DIN EN ISO
17226-1
FORD
DESCRIPTION
Resistance of Textiles to Bleeding, Respiration and Water Spotting
Ford Laboratory Test Method; Water Immersion Test for Painted Parts and Panels
Ford Laboratery Test Method; Painted Adhesion Test
Ford Laboratery Test Method; Hydrolysis Resistance of Painted Plastic Panels
METHOD
FLTM AN 101-01
FLTM BI 104-01
FLTM BI 106-01
FLTM BI 106-03
DESCRIPTION
Resistance of Textiles to Bleeding, Respiration and Water Spotting
Ford Laboratory Test Method; Water Immersion Test for Painted Parts and Panels
Ford Laboratery Test Method; Painted Adhesion Test
Ford Laboratery Test Method; Hydrolysis Resistance of Painted Plastic Panels
Thermal Test Method for Paint Adhesion
Color Difference Evalation Of Textile Materials
Water and Soap Spotting Test for Paint
Resistance to Acid Spotting
Test Method for Resistance to Perspiration, Ford Laboratory test Method; Thickness measurment of paint film
Resistance to Sunscreen Lotion and Insect Repellent
Thickness Measurement of Paint Films
Filiform Corrosion Test
High Performance stone chip resistance test New Rating Scale
Florida and Arisona Outdoor Exposure Test
Ford Laboratory Test Method; Mar Resistance Determination for Automotive Coatings
Fluid Resistance of Chassis and Exterior Materials for Incidental Exposure
Ford Laboratery Test Method; Flammability Test For Automotive Interior Materials
Ford Laboratery Test Method; Flammability for Automotive Interior Materials
Polymeric Materials - Low Temperature Flexibility
Flex Test for Polymeric Coated Fabrics, Genuine Leathers and Woven Fabrics
Flex Ford Test
Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking
Shrinkage Test for Textiles and Artificial Leathers
Dimensional Stability of Textile Trim Materials
Determination of Weight per Unit Area and Denisty of Trim Materials
Crocking Test
Thermal Shock Test for Paint Adhesion
Resistance to Abrasion - Taber Abraser
Resistance to Scuffing
Resistance to Scratching
Degree of Soil Transfer to Leather and Polymeric Fabrics
Soiling & Cleanerbility Test for Interior Trim Materials
Test Method for Susceptibility of Trim Materials to Dye Ingress (North America Only)
Evaluation of Trim Materials after Accelerated Exposure in a Controlled Irradiance Water Cooled Xenon Arc Apparatus
Determination of 180 Degree Peel Adhesion Strength of Laminates
Resistance to Simulated Finger Trip Abrasion
Determination of Leather Stiffness
Determination of Fuel Resistance of Plastic Parts
METHOD
FLTM AN 101-01
FLTM BI 104-01
FLTM BI 106-01
FLTM BI 106-03
FLTM BI 107-05
FLTM BI 109-03
FLTM BI 113-01
FLTM BI 113-02
FLTM BI 113-06
FLTM BI 113-08
FLTM BI 117-01
FLTM BI 124-01
FLTM BI 157-06
FLTM BI 160-01
FLTM BI 161-01
FLTM BI 168-01
FLTM BN 024-02
FLTM BN 024-
02EU
FLTM BN 102-01
FLTM BN 102-02
FLTM BN 102-04
FLTM BN 103-01
FLTM BN 105-01
FLTM BN 105-03
FLTM BN 106-01
FLTM BN 107-01
FLTM BN 107-05
FLTM BN 108-02
FLTM BN 108-04
FLTM BN 108-13
FLTM BN 112-03
FLTM BN 112-08
FLTM BN 112-09
FLTM BN 117-03
FLTM BN 151-05
FLTM BN 155-01
FLTM BN 157-02
FLTM BO 101-05
DESCRIPTION
Test for Identation and Recovery
Dynamic Energy Absorption of Polyurethane Foam
Ford Laboratery Test Method; Staining of Trim Material Identification Markings
Load Deflection Test
Rolling Sphere Fatigue Test for Arm Rest and Other Intricate Trim Assembles
Plastics - Resistance to Artificial Weathering
Exposure of Interior Trim Materials in a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
Interior Trim - Fogging Caracteristics
Stress Cracking Test for Plastics
New Odor Test
Resistance to Low Temperature Impact
Plastics and Tapes Resistance To Protective Waxes and Dewaxing Material
Determination of Chemical Stress Crack Resistance of Plastic Parts under Mechanical Stress
Resistance of Painted Plastic Parts to High Pressure Cleaning Operations
Resistance to Scratch and Marr
Rubber - Degradation by Ozone
Staining of Surfaces by Polymers and Elastomers
Environmental Test Cycles
Determination of Organicemission From Non Metallic Components, Parts and Materials in Vehicle Interiors
Determination of organic emissions from non-metallic materials in vehicle interiors by Headspace Gas Chromatography
Performance; Vehicle Interior Environment Quality
Performance, Headlining, Formed Not to Be Used for New Design
Performance, Headlining, Formed
Performance, Interior Trim Appliques, High Wear (C1)Performance, Interior Trim Appliques, Low Wear (C2)
Engineering Material Specification; Throw in Mat Assembles, Carpeted
Performance, Instrument Panel Assembly, Flexible Cover Skin Material
Assembly Performance, Instrument Panel and Soft Interior Components, Flexible Cover Skin Material
Interior Trim; Assembly Performance Specification
Fabric, Styilize, Pattern, Woven Jacquard
Electroplating, Bright or Low Gloss decorative finish over ABS PC/ABS or Filled Nylon - Interior
Paint Performance, Metal Substrates - low /moderate/high visibility
Print Performance, Rigid Substances, Exterior
Paint Performance, Flexible Substrates, Exterior
Paint Performance, Plastic Substrates, Interior
Paint Performance, Visible Interior Parts
METHOD
FLTM BO 111-02
FLTM BO 111-04
FLTM BO 112-06
FLTM BO 113-03
FLTM BO 113-04
FLTM BO 115-01
FLTM BO 116-01
FLTM BO 116-03
FLTM BO 127-03
FLTM BO 131-01
FLTM BO 151-01
FLTM BO 155-01
FLTM BO 158-03
FLTM BO 160-04
FLTM BO 162-01
FLTM BP 101-01
FLTM BP 153-01
FLTM BQ 104-07
FLTM BZ 156-01
FLTM BZ 157-01
WSS 99P2222-
A1
WSS M15P27-D
WSS M15P27-F
WSS M15P34
(C1-C2)
WSS M15P44-A
WSS M15P45-A
WSS M15P45-B
WSS M15P4-E
WSS M1H787-A
WSS M1P83
(A1-D3)
WSS M2P177
(C1-C3)
WSS M2P180-C
WSS M2P181-C
WSS M2P188-
A1
WSS M2P190-A
DESCRIPTION
Coating Performance; Decorative Finish, Bright Metal Parts, Interior
Carpet, Polypropylen, Random Velour Latex Backed Moldable
Thermoplastic Polyolefin Elastomer (TPO), High Melt Flow, 22% Mineral Filled, Mold-In-Colour Only, Molding compound Exterior; Thermoplastic Polyolefin Elastomer (TPO), High Melt Flow, 22% Mineral Filled, fully Painted only, Molding compound, Exterior
ABS Molding Compound, High Heat Resistant High Impact Molding Compound
Polypropylene (PP) Homopolymer, 30% Long Glass Fiber and Mineral Reinforces Molding Compound
ABS+Polyamide Blend (ABS+PA) Molding Compound Interior
Flexible coverstock, slush moldable polyvinyl chloride (PVC) or polyvenyl chloride alloy,seamless instrument panal
Steering Wheel Material Performance Specification
Exterior Plastic Performance, Mold-In-Colour
Standard Requirements for Production Materials
Performance, vehicle Interior Environment Quality
(B1) Performance, vehicle Interior Environment Quality Material/ Component Requirements (B2) Performance, vehicle Interior Environment Quality Allergy Testing and Contact Requirements (B3) Performance, Vehicle Interior Environment Quality HVAC Requirements (B4) Performance, Vehicle Interior Environment Quality Complete Vehicle Requirements
Performance, Vehicle Interior Enviroment Quality Component Requirements (C1); Performance, Vehicle Interior Enviroment Quality Allergy Testing and direct Skin Contact Requirements (C2) Performance, Vehicle Interior Enviroment Quality HVAC Requirements (C3) Performance, Vehicle Interior Enviroment Quality Copmplete Vehicle Requirements (C4)
Performance, Energy Absorbing Foam, Interior
Performance Sprayable Coating, Acoustic, Interior and Exterior, Body Panels
(A) Label Performance, Interior (A2) Laber Performance, Interior/Exterior (A3) Label Performance, Exterior (A4) Label Performance, under Hood
Restricted Substance Management Standard
Elastomeric Parts, Interior Performance
Standard Requirements for Production Materials
METHOD
WSS M2P191-A1
WSS M3H120-A
WSS M4D1005 (A1-A2)
WSS M4D827-A3
WSS M4D865-A4
WSS M4D960-A
WSS M4D985-A3
WSS M98P12-A
WSS M98P13-B
WSS M99P1111-A
WSS M99P2222 (A1-A3)
WSS M99P2222 (B1-B4)
WSS M99P2222 (C1-C4)
WSS M99P29
WSS M99P30
WSS M99P34 (A1-A4)
WSS M99P9999-A1
WSS M9P8-B
WSS MPA99P1111-A
GM
DESCRIPTION
Migration - Bleeding Resistance and Contact Stain Compatibility of PVC with other Materials
Determination of Impact Resistance of Plastic Components
Test MethodMaterials; Test Method for the Determination of Water Spotting
Test Method for the Resistance of Materials to Cracking from Bending at Cold Temperature
General Specification Interior; Door Trim Panel
IP Trim and Floor Console Technical Specification
Plastic Roll Goods, PRG
Test Procedure Materials; Automotive Environmental Cycles
METHOD
GMW 14069
GMW 14093
GMW 14102
GMW 14108
GMW 14109
GMW 14117
GMW 14122
GMW 14124
DESCRIPTION
Linear abrasion test
Test Procedure; Resistance to Cold Crack of Folded Materials
Impact Cold Crack
Test Procedure; Resistance to Marring or Scuffing
Compatibility of Interior Trim Materials with Amines
Resistance to Blocking
Dye Migration
Stitch Tear Out Resistance
Test Method Material; Colorfastness to Artificial Weathering
Material Specification Textiles; Automotive Fabrics
Determination of Aldahyd and Ketone Emissions from Vehicle Interior Materials
Perspiration Resistance
HVAC Air Ducts
Resistance to Fuels of Exteriors Automotive Materials and components
Chemical Resistance to Fluids
Determining of the Moisture Content of Plastic Components and Molding Compounds
Procedures of test for Cellular and related materials determination of resitance to humidity aging
Determination of Indentation Hardness of Foam Components at Constant Force
General specification; Material Related Interior Part Performance
Test Method Materials; Sunscreen and Insect Repellent Resistance
Testing of Staining Behaviour of Molded Headlining through Dust Deposits
Security Shade Fabric
Performance Requirements for Exterior Plastic Parts
General Specification Overall Vehicle; Material Related Interior Plastic Part Performance Monolithic Plastic Parts and Injection Molded Plastic Substrates
Interior Trim Substrate Materials with Natural Content
Anodic Oxidation Coating Alumium
Minimum Perfomance Requirements for Decorative Chromium Plated Plastic Parts
Organic Coating Performance for Underhood and Underbody Components
Minimum Plating Structure and Performance Requirements for Decorative Chromium Plated Metallic Parts
Test Method Materials; Scratch and Mar Resistance
Test Method Materials; Determining the Cohesive Strength of Felts and Similar Materials
Test Method Materials; Scratch Resistance of Organic Coatings and Self-Adhesive Foils
Stone Impact Resistance of Coatings
Resistance of Coating to Chemical Etching and Distortion
Adhesion of Organic Coatings after Storage in Warm Water
Material Specification Plastics; Accelerated Aging Requirement for Polymer Safety Parts
Elastomeric Floor Mats
Test Procedure Materials; Procedures for High Humidity Test
Test Method for Determining the Dimensional Stability of Fiberboards, Cardboard, and Similar Rigid Materials under Humid Conditions
METHOD
GMW 14125
GMW 14126
GMW 14127
GMW 14130
GMW 14131
GMW 14132
GMW 14141
GMW 14146
GMW 14162
GMW 14231
GMW 14236
GMW 14296
GMW 14325
GMW 14333
GMW 14334
GMW 14335
GMW 14357
GMW 14363
GMW 14444
GMW 14445
GMW 14512
GMW 14553
GMW 14650
GMW 14651
GMW 14652
GMW 14665
GMW 14668
GMW 14671
GMW 14672
GMW 14688
GMW 14695
GMW 14698
GMW 14700
GMW 14701
GMW 14704
GMW 14709
GMW 14722
GMW 14729
GMW 14773
DESCRIPTION
Test Method for Determining the Bursting Strength of Cardboard, Fiberboard and Similar Rigid Materials
Test Method for Determining Moisture Content, Water Absorption and Thickness Swell of Fiberboards, Chipboards, Cardboard, and Similar Rigid Materials
Exterior Plastic and Engine Compartment; Painted Parts Performance Requirements
Test Procedure; Tape Adhesion test for Paint Finishes
Non Metallic Fuel Tank Impact Resistance
Procedure of Determining the Staining of Trim materials Due to Sulfur Dioxide, SO2, and Hydrogen Sulfide, H2S
Material Specification Paints; Performance Requirements of Paints on Interior Plastic Substrates
Cyclic Corrosion Laboratory Test
Material Specification Adhesives; Adhesion Requirements for Bonded Interior Parts
Test Fluids for Fuel Resistant Testing
Elastic and Non-Elastic Cords and Straps
Documentation for Control of Appearance Aesthetic Quality; Color and Gloss
Corrosion/Undercutting Scribe Creepback
Scab Corrosion Creepback of Paint Systems on Metal Substrates
Component Rating Scale
Molded Seat Foam Parts
Safety Belt Webbing - Polyester
Polypropylene Copolymer – Mineral Filled, UV Stable
Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Unfilled
Determination of Aldehyde and Ketone Emissions, in Vehicle Interior Cabin Air
Determination of Volatile and Semi-Volatile Organic Compounds from Vehicle Interior Materials
Determination of Aldehyde and Ketone Emissions from Interior Materials
Solvent Rub Method For Determining Cure of Painted Metal Or Plastic Substrates
Blend from Polypropylene and EPR, UV Stable
Material Specification Finish; Quality and Chrome Plater Approval Process
Determination of Colour Fastness to Artificial Light
Test Method Materials; Determination of Tensile and Elongation Properties
Safety Belt Webbing Technical Specification
Carpet Materials for Floors
Material Specification; General; Restricted and Reportable Substances for Parts
Verification of Requirements for Frontal Air Bag Modules
Validation of Cover/Door Subcomponent for Frontal, Side and Roof Rail Airbag Modules
Thermal Cycling Test for Life Assessment for Powertain Sealing Systems
GM Worldwide Engeneering Standards
Determination of Mass per Area
Determining the Resistance to Odor Propagation of Interior Materials
Test Method Material; Rotary Abrasion Test Type
Resistance to Stretch and Set
Laminate Bond Strength
METHOD
GMW 14776
GMW 14777
GMW 14797
GMW 14829
GMW 14847
GMW 14864
GMW 14867
GMW 14872
GMW 14892
GMW 14914
GMW 15015
GMW 15195
GMW 15282
GMW 15288
GMW 15357
GMW 15471
GMW 15478
GMW 15548
GMW 15581
GMW 15600
GMW 15634
GMW 15635
GMW 15891
GMW 15988
GMW 16193
GMW 3007TM
GMW 3010
GMW 3020
GMW 3026
GMW 3059
GMW 3112
GMW 3133
GMW 3155
GMW 3172
GMW 3182
GMW 3205
GMW 3208
GMW 3211
GMW 3220
DESCRIPTION
Procedure for Standard Conditioning of Organic Materials
Test Method for Determining the Flammability of Interior Trim Materials
Fogging Characteristics of Trim Materials
Test Procedure; Mildew Resistance
Test Method Materials; Schopper Abrasion Wear Test
Procedure for Neutral Salt Spray Test
Procedure for Determining Fiber Degradation of Automotive Textiles
Procedure for Determining the Flexibility of Automotive Upholstery Materials
Test Method Materials; Soil and Cleaner Resistance of Automotive Materials
Seam Fatigue for Automobile Textiles
Artificial Weathering of Automotive Interior Trim Materials
Natural Weathering Exposure Tests for Interior Trims/ Materials
General Procedures for Testing Switches
Dimensional Stabilitv
Compatibilty of Upholstery Materials
The Determination of indentation Hardness by Means of a Durometer (Shore A and D)
Test procedure; Determination of resistance to synthetic perspiation solution of automotive trim components
Test Method Materials; Visual Evaluation of Automotive Trim
Static Headspace GC-MS for Interior Materials; Interior Emissions
METHOD
GMW 3221
GMW 3232
GMW 3235
GMW 3259
GMW 3283
GMW 3286
GMW 3387
GMW 3390
GMW 3402
GMW 3405
GMW 3414
GMW 3417
GMW 3431
GMW 4217
GMW 4659
GMW 60259
GMW 60275
GMW 6992
GMW 8081
DESCRIPTION
Conditioning of painted test panels before testing
Peeling Strength - Laminated Materials
Adhesion; Overspilled Flock
Peeling Strength; Laminated Materials
Scratch Resistance, Erichsen Pen - Organic Materials
Discoloration of Organic Finishes; Rubber Material
Light Fastness 60°C
Assessment of Colour in Light Booth
Standard: Volvo Car Corporation
Colour fastness to artifical light at 100°C
Colour Fastness to Rubbing; Rubber, Plastics and Textiles
Accelerated Corrosion Test Accelererad Korrosionsprovning; Atmospheric Corrosion
Colour Fastness to Artificial Light at 75 °C
METHOD
VCS 1021,19
VCS 1024,2843
VCS 1024,28129
VCS 1024,28439
VCS 1024,31139
VCS 1026,8131
VCS 1026,8243
VCS 1026,51729
VCS 1026,52759
VCS 1026,82429
VCS 1026,84329
VCS 1027,149
VCS 1027,359
VOLVO
DESCRIPTION
Heat Ageing
Fogging
Odour of Trim Materials in Vehicles
Determination of Formaldehyde form Components in Vehicle Interiors
Determination of Organic Emission from Non-Metallic Materials in Vehicle Interiors
Quantification of Specific Volatile Organic Substances from Non-Metallic Materials in Vehicle Interiors
Determination of volatile organic substances frominterior components/systems using a 1 m³ emissionchamber
Climate Ageing
Light exposure; Accelerated ageing of exterior material
Climate Ageing
Moisture Resistance in Tropical Cabinet
Adhesion, Cross-Cut Test
Adhesion
Flammability of Interior Materials
METHOD
VCS 1027,2231
VCS 1027,2719
VCS 1027,2729
VCS 1027,2739
VCS 1027,2749
VCS 1027,2759
VCS 1027,2769
VCS 1027,3372
VCS 1027,3379
VCS 1027,33729
VCS 1027,33759
VCS 1029,54729
VCS 1029,54739
VCS 5031, 19
HONDA
DESCRIPTION
Test method for VOC
Flammabiltiy test Method for Automobile inetrior parts
METHOD
0094Z-SNA-0000
HES D 6003-99
TOYOTA
METHOD
TSM 0505G
TSM 0508G
TSM 0503G
TSM 0500G
VDA
METHOD
VDA 278
VDA 270
VDA 277
VDA 75202
VDA 230-209
VDA 275
DESCRIPTION
Thermal Desorption Analysis of Organic Emissionsfor the Characterization of Non-Metallic Materials for Automobiles
Determination of the odour characteristics of trim materials in motor vehicles
Determination of organic emissions from nonmetallicmaterials in vehicle interiors
Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
Leather, plastic roll stock and textiles for motor vehicle, Determination of the flexural properties
Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method
DESCRIPTION
Smell quality of non-metallic materials
Volatile component measurement method using sampling bag
Fogging test for non-metallic materials
Flammability test method for interior non metallic materials
HYUNDAIKIA
DESCRIPTION
Molded Plastic Parts - Interior Use
Flammability Resistance - Interior Materials
Test Method of Odor for Interior Parts
METHOD
MS 210-05
MS 300-08
MS 300-34
DESCRIPTION
Testing of the corrosion protection of automotive coatings
Chemical resistance of automotive coatings
Elastomere parts in motor vehicle - DSC
Determination of volatile, organic emissions from parts of trim materials using a 1 m³ testing chamber
METHOD
VDA 621-415
VDA 621-412
VDA 675-116
VDA 276
PORSCHE
METHOD
PN 780
PPV 8041
PPV 8042
PTL 5536
PTL 8501
PPV 4050
PPV 4014
PTL 5538
PTL 8140
PTL 8172
PTL 5522
DESCRIPTION
Determination of the emission behaviour of trim materials in motor vehicles
Emisson test using a testing chamber in accordance to VDA 276-1
Interior emission behaviour - Thermal Desorption Analysis in accordance to VDA 278
Interior surface decore - Coating/pad printing/hot embossing; Requirements and tests
Determination of the burning behaviour acc. to FMVSS 302
Vehicle components; Determination of volatile organic emissions; emission test using SHED chambers
Exterior; Weathering of non-metallic materials in dry-heat climate and moist-hot climate
Interior surface decore - Wood/Carbon/piano lacquer/metallic; Requirements and tests
Interior parts; Requirements and tests
Technical supply specification; Flocked plastic parts in the interior; Requirements and tests
Coating of non-metallic materials for interior usage
JAGUAR
METHOD
TP JLR 51.5224
TP JLR 51.5223
TP JLR 51.5242
TP JLR 51.5262
TP JLR 52.104
TP JLR 52.458
TP JLR 52.107
DESCRIPTION
Instrument Panel Assembly Performance: Incorporating Flexible Cover Skin Material
Temporary Protection Systems for Trim Components
Paint & Lacquer Performance - Interior
Performance Requirements Of Plastics
Determination of VOC and Carbonyl Emission for interior materials
Determination and assessment of odour from interior trim materials, components and assemblies
Determination of VOC's from Interior Components and Systems using a 1 m³ Emission Chamber
PSA RENAULT
METHOD
D45 1333
D45 1727
D47 1122
D45 1601
D47 1431
D45 1010
D 45 1431
DESCRIPTION
Materials Inside Passanger Compartment; Horizontal Flammability
Test Method; Interior Trim Materials and Passanger Compartment Parts; Fogging
Trim Materials; Colour Fastness to Artificial Light at Low Temperature
Passanger Compartment materials Volatility of Additives on a Single Surface
Passenger Compartment Materials and Parts; Colour-fastness in Artificial Light at High Temperature
Polymere Materials and Parts Inside and Outside Passenger Compartments Colourfastness to Rubbing
Materials and passenger compartment partsBehaviour of the appearance to artificial light at high and medium temperatures
SAE
METHOD
SAE J 369
SAE J 365
SAE J 948
SAE J 1960
SAE J 2412
SAE J 2527
DESCRIPTION
Flammability of Polymeric Interior Materials - Horizontal Test Method
Method of Testing to Scuffing of Trim Materials
Test Method for Determining Resistance to Abrasion of Automotive Bodycloth Vinyl and Leather and the Snagging of Automotive Bodycloth
Accelerated Exposure of Automotive Lonterior Trim Components Using a Controlled Irradiance Water Cooled Xenon -Arc Apparatures
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus
WWW.SGS.COM
© S
GS
Gro
up M
anag
em
ent
SA
– 2
012 –
All
rights
rese
rved - S
GS
is a
regis
tere
d t
radem
ark
of
SG
S G
roup M
anag
em
ent
SA
top related