cmp & supply co
Post on 02-Nov-2021
1 Views
Preview:
TRANSCRIPT
Connecticut DOT DBE Certified
Tel: 207-487-3681 Fax: 207-487-3684
Website: www.cmpandsupply.com
2015
CMP & SUPPLY CO.
2 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
Payment:
Our terms are Net 30 Days.
Warranty:
CMP & Supply neither makes, nor shall we be bound by any other warranty, express or implied, statutory
or otherwise. Under no circumstances shall CMP & Supply be liable for any loss, damage, expense or
consequential damage of any kind arising from the use or the inability to use any of our products.
Pricing:
Prices are subject to change without notice, and unless specified differently on CMP & Supply’s
confirmation, orders will be shipped at pricing in effect on date of shipment. Prices quoted herein are exclusive
of all taxes and shall remain the sole responsibility of the buyer. CMP & Supply shall not be liable for any
delays due to causes beyond its control such as but not limited to: acts of God, labor dispute, or transportation or
supply difficulties. We reserve the right to adjust catalog prices at any time without prior notice. Any product
shortage or damaged material must be reported to CMP & Supply within five working days of receipt.
Acceptance of our product indicates Purchaser’s acceptance of these Terms and Conditions.
Cancellations or changes to an open order:
Customer must notify CMP & Supply immediately to cancel an item on an order that has not been
processed or shipped. Special products are non-returnable or non-cancelable once product is shipped.
Surcharges:
Surcharges may be applied on certain products.
Returned Merchandise:
CMP & Supply reserves the right to refuse cancellations or returns. Seller has sole discretion to determine
the value at which merchandise returned will be credited. Returned merchandise is subject to applicable freight
charge and a 20% restocking fee.
TERMS & CONDITIONS
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 3
Vendor Listing A-Z Partial listing
3-IN-ONE
3M
Aearo
Ajax
Allen
Ames Tru Temper
Anthony Cylinder Carts
Apex
Arcair
Arrow
Astro Pneumatic
ATA Tools
Atlas
Avesta
Band-It
Benzomatic
Bernard
Bessy Clamps
Bosch
Boss
Bostitch
C S Unitec
Camel
Cam-Lok
Campbell
Channel Lock
Comeaux Caps
Contour
Cooper Tools
Crescent
Crews
Delta
Dewalt
Dicke Safety
Direct Wire & Cable
Duracell
Duragloss Dykem/Dymon/Mark-
Tex
Dynaflux
Eagle Brushes
Eagle Mfg.
E-A-R plugs
Energizer
Enerpac
Ever ready
FeatherLight Ladders
Fend All
Fill-Rite
First Aid Only
Flame Tech
Flange Wizard
G.C. Fuller
Gatorade
Georgia Pacific
Gererico
Gilbreth Industries
Gojo
Golden Empire Co.
Goss Equipment
Gray
Guardian
H.K. Porter
Hanson
Harris
Henkel
Hitachi
Hobart
Howard Leight
Huntsman
Igloo
Impact
Impacto
Irwin Industries
J.W. Harris
Jackson Products
Jaguar Plastics
Jamco Products
Johnson Diversey
Justrite
Kidde
Kimberly-Clark
Kleen Products
Kleenex
Klein Tool
Krylon
Kutol
Lakeland Industries
Lava
Legacy
Lenco Products
Loctite
Lufkin
Magnaflux
Makita
Master Lock
Master Power
MCR Memphis
Memphis
Metabo Power Tools
Michigan Pneumatic
Milwaukee
Moldex
MSA
National Marker
Nelco New England Twist
Drill
North
Norton
Oetiker
Oreck
Patco Air Tools
Pearson
Phoenix Rod Ovens
Porta-Band
Powers Fasteners
Profax
Proto
Pyramex
Rod Guard
Rubbermaid
Saf-T-Cart
Sharpie
Shop-Vac
Shurlite
Sioux Tools
SK Hand Tools
Skil
Smith Equipment
Solo Cup
SPC
Sperian
Spotshot
Squincher
Stanley
Streamlight
Sumer
Superior Fitting
Sylvania
Tempil Products
Texas Pneumatic
Thermacut
Thermal Dynamics
Tweco
UltraSafe
Unibit
Unisan
Uniweld
Urrea
Uvex
Vertex Standard
Victor
VonDrehle Corp.
Walter Kidde
WD-40
Weiler
Weiler Brush
Weld-Air Products
Weldcraft
Welding Nozzle
Weller
Western Enterprises
Wilson Safety Curtains
Wilton
Wiss
Wright Tool
Wypall
CMP & SUPPLY CO.
4 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
A Annular Cutters 13
Arc Welding Electrodes 45
B
Back-up Pads 23
Barricade Tape 61
Batteries 61
Beam Clamps & Trolleys 63
Bench Wheel 20
Blades
Band Saw 19
Circular-Saw 19
Cut-Off 17
Hack Saw 14
Hole Saw 12
JigSaw 14
Reciprocating 14
Boots 58
Burrs 24
C Cable Connectors 44
Cable Cover 32
Carabiners 59
Carbide Burrs 24
Carbon Arc Electrodes & Torches 46
Chain Hoist 63
Chemicals 7
Circular Saw Blades 19
Clamps, Ground 44
Clothing 58
Contact Tips 35-36
Cups, Crimped 25
Cups, Knot 25
Cups, Shield 43
Cups, Tig 31
Cut-Off Wheels 17
Cutting Tips 2
D Diffuser, Mig 39
Disc, Fiber 23
Disc, Flap 22
Drill Bits 9-11
Drop Lights 61
E Ear Protection 55
Electrodes, Arc Welding 45
Electrodes, Carbon Arc 46
Electrodes, Tungsten 33
Electrode Holders 44
Eye Glass Cords 53
Eye Protection 51-53
F Fall Protection 59
Fiber Discs 23
Fire Detectors 57
Fire Extinguishers 57
First Aid 58
Flashlights 61
Flint 28
Flap Wheel Discs 22
Flap Wheels & Arbors 21
Flow Meters & Gauges 26
G Gauges 26
Gas Lens, Tig 32
Glasses, Safety 51-53
Gloves 54-55
Goggles 51-53
Gouging Torches & Electrodes 46
Gouging Tips 27
Grinding Wheels 15-16
Ground Clamps 44
Gas Kits 26
Guns, Mig 34
H Hack Saws 14
Hand Cleaners 7
Hard Hats 60
Harnesses 60
Hearing Protection 55
Helmets, Welding 47-48
Hoists 63
Hole Saws 12
Hose 28
I-J-K Insulator, Torch 30
Insulator, Mig 39
Janitorial Supplies 6-8
JigSaw Blades 14
L Lanyards 59-60
Levels 64
Lever Hoists 63
Lighting 61
Life Lines 60
Liners, Helmet 60
Liners, Mig Gun 39
Lugs, Cable 44
M
Mandrel 17
Masking Tape 61
Masonry Drill Bits 11
Mig:
Contact Tips 35-36
Gas Diffusers 39
Gloves 54
Guns 34
Insulators 39
Liners 39
Nozzles 37-38
Welding Wires 40-42
Mounted Points 24
N Non-Woven Pads 19
O Oxy/Acetylene Equipment 26-27
P
Pads, Non-Woven 19
Paint Brushes 25
Paper Products 6
Pins, center 14
Plasma 42-43
Plates, Cover 49
Quartz Light Bulbs & Fixtures 61
R Raingear 58
Rags 8
Reciprocating Saw Blades 14
Regulators, Inert Gas 26
Respirators 56
Retractables 60
Contents
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 5
S Saw Blades:
Band 19
Circular 19
Hack 14
Hole 12
Reciprocating 14
Shop Pads 19
Signage 57
Silver & Deming Drill Bits 10
Soaps 7
Soapstone 28
Straight Shank Masonry Drill Bits 11
T Tapes 61
Tape Measures 64
Tig: 29-31
Tungsten 33
Welding Wire 44
Tip Cleaners 28
Tips, Cutting, 27
Torch Handle 30
Torches:
Tig 29
Traffic Vests 58
Trash Bags 8
Trolleys 63
Twin Oxygen/Fuel Gas Hose 28
U-V
Vests, Safety 58
Visors 53
W Welding:
Cable Connectors 44
Clothing 55
Gloves 54-55
Goggles 53
Helmets & Hoods 47-48
Jacket 58
Winter Liners 50
6 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
PAPER PRODUCTS
ITEM# DESCRIPTION PRICE
SBF52231 2 ply paper towel 100 sheets 30 rolls/cs $28.75
SBF11230 Toilet Tissue 2 ply 96 rolls per carton $49.95
BATH T23633 9”X3.7 2 Ply Jumbo Bath Tissue – 12/case $26.51
HWRTBR350 Hardwound Roll Towel Brown 350' - 12 rolls/cs $26.25
HWRTBR600 Hardwound Roll Towel Brown 600-12 rolls/cs $38.00
HWRT-WT600 Hardwound Roll Towel White 600 12 rolls/cs $49.00
JUMBO SHOP ROLL 10” X 4750’ $55.00
CPRT 7200E-3 Center-Pull Towels, 2 ply 8"x600' per roll 6 roll/cs $26.82
Partial Listing - We carry a full line of paper and dispensers for all of your paper needs.
Please call for more information.
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 7
SOAPS – CLEANERS – CANLINERS - RAGS
ITEM# DESCRIPTION PRICE
GOJ 5161 GOJO Luxury Foam soap 1 1250 ml. bottle $16.15
GOJ7255 GOJO Natural Orange Pumice 1- 2000 ml bottle $18.94
GOJ7556 GOJO Natural Orange Pumice 1-5000 ml bottles $38.99
4567 Super Scrub Green w/scrubbers 2 ltr bottle $22.69
458189 Dial Antibacterial 1 gallon $15.25
458180 Dial Antibacterial gold bar soap 1 bar $1.09
COX 97326 Pine Sol Disinfectant deodorizer 24oz bottle $5.52
DYM 42272 SCRUBS in a bucket 6/case 72 count $79.16
28707706 Kresto Kwik Wipes 6/tubs per cs 70 count $79.00
494052 Simple green all-purpose biodegradable 1 gal. $14.17
8 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
848987 Cleaner, Mop & Glo 64 oz. $12.51
807729 Glass Cleaner, Sustainable Earth 1 gallon $ 6.85
BPR919537-1 Brighton One step Floor Cleaner 1 gal $23.95
672160 Cleaner, Spic and Span, Floor 1 Gallon $38.98
RAGS-COLOR-T Reclaimed colored t-shirt rags 50lb. box $50.00
RAGS –WHITE-T Reclaimed White T-shirt rags 50 lb. box $68.75
CANLINERS – partial listing call for more sizes!
ITEM# DESCRIPTION PRICE
864786 Can liner 10 gallon black 500/cs $21.00
814876 Can liner 33 gal. white 150/c $18.99
814856 Can liner 33x40 33 gallon black 250/cs $24.85
814884 Can liner 40-45 gal clear 250/cs $26.75
814888 Can liner 60 gal black 100/cs $41.90
847252 Can liner 16 gal clear 1000/cs $46.54
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 9
SIZE PKG ITEM # PRICE
1 12 J2-01 1.25
2 12 J2-02 1.25
3 12 J2-03 1.25
4 12 J2-04 1.25
5 12 J2-05 1.25
6 12 J2-06 1.25
7 12 J2-07 1.25
8 12 J2-08 1.25
9 12 J2-09 1.25
10 12 J2-10 1.25
11 12 J2-11 1.25
12 12 J2-12 1.25
13 12 J2-13 1.25
14 12 J2-14 1.25
15 12 J2-15 1.25
16 12 J2-16 1.25
17 12 J2-17 1.25
18 12 J2-18 .88
19 12 J2-19 .88 20 12 J2-20 .88 21 12 J2-21 .88 22 12 J2-22 .88 23 12 J2-23 .88 24 12 J2-24 .88 25 12 J2-25 .88 26 12 J2-26 .88 27 12 J2-27 .88 28 12 J2-28 .67
29 12 J2-29 .67 30 12 J2-30 .67 31 12 J2-31 .67 32 12 J2-32 .67 33 12 J2-33 .67 34 12 J2-34 .67 35 12 J2-35 .67 36 12 J2-36 .67 37 12 J2-37 .67 38 12 J2-38 .67 39 12 J2-39 .67 40 12 J2-40 .67
SIZE PKG ITEM # ITEM # #PRICE
1/16 12 J-116 JB-116 .56
5/64 12 J-564 JB-564 .56
3/32 12 J-332 JB-332 .56
7/64 12 J-764 JB-764 .56
1/8 12 J-18 JB-18 .56
9/64 12 J-964 JB-964 .67
5/32 12 J-532 JB-532 .67
11/64 12 J-1164 JB-1164 .67
3/16 12 J-316 JB-316 .67
13/64 12 J-1364 JB-1364 .97
7/32 12 J-732 JB-732 .97
15/64 12 J-1564 JB-1564 .97
1/4 12 J-14 JB-14 .97
17/64 12 J-1764 JB-1764 1.78
9/32 12 J-932 JB-932 1.79
19/64 6 J-1964 JB-1964 1.99
5/16 6 J-516 JB-516 1.88
21/64 6 J-2164 JB-2164 2.33
11/32 6 J-1132 JB-1132 2.55
23/64 6 J-2364 JB-2364 1.96
3/8 6 J-38 JB-38 2.79
25/64 6 J-2564 JB-2564 3.12
13/32 6 J-1332 JB-1332 3.57
27/64 6 J-2764 JB-2764 3.73
7/16 6 J-716 JB-716 3.94
29/64 6 J-2964 JB-2964 4.33
15/32 6 J-1532 JB-1532 4.59
31/64 6 J-3164 JB-3164 4.71
1/2 6 J-12 JB-12 4.65
10 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
SIZE ITEM # PRICE
17/32 SD3-3364 9.91
9/16 SD3-916 10.45
19/32 SD3-1932 11.39
5/8 SD3-58 11.94
21/32 SD3-2132 12.67
11/16 SD3-1116 13.37
23/32 SD3-2332 13.79
3/4 SD3-34 14.41
25/32 SD3-2532 15.40
13/16 SD3-1316 15.93
27/32 SD3-2732 16.66
15/16 SD3-1516 18.90
31/32 SD3-3132 20.64
1 SDL3-1 22.29
1-1/16 SDL3-1116 25.38
1-1/8 SDL3-118 28.67
1-3/16 SDL3-1316 32.21
1-1/4 SDL3-114 34.86
SIZE PKG ITEM # PRICE
1/16 12 C1-116 1.08
5/64 12 C1-564 1.08
3/32 12 C1-332 1.08
7/64 12 C1-764 1.17
1/8 12 C1-18 1.23
9/64 12 C1-964 1.35
5/32 12 C1-532 1.61
11/64 12 C1-1164 1.73
3/16 12 C1-316 2.01
13/64 12 C1-1364 2.44
7/32 12 C1-732 2.44
15/64 12 C1-1564 2.71
1/4 12 C1-14 2.71
17/64 12 C1-1764 3.76
9/32 12 C1-932 4.15
19/64 6 C1-1964 4.01
5/16 6 C1-516 4.11
21/64 6 C1-2164 4.59
11/32 6 C1-1132 4.59
23/64 6 C1-2364 5.83
3/8 6 C1-38 5.83
25/64 6 C1-2564 6.33
13/32 6 C1-1332 7.00
27/64 6 C1-2764 7.49
7/16 6 C1-716 8.01
29/64 6 C1-2964 8.77
15/32 6 C1-1532 9.50
31/64 6 C1-3164 10.14
1/2 6 C1-12 10.05
17/32 CSD-1732 33.06 15/16 CSD-1516 73.03
9/16 CSD-916 35.00 31/32 CSD-3132 74.42
19/32 CSD-1932 41.37 1 CSDL-1 74.42
5/8 CSD-58 41.79 1-1/16 CSDL-
1116
102.58
21/32 CSD-2132 40.21 1-1/8 CSDL-118 129.74
11/16 CSD-1116 41.32 1-3/16 CSDL-
1316
141.63
23/32 CSD-2332 43.11 1-1/4
13/16 CSD-1316 52.27
27/32 CSD-2732 62.90
7/8 CSD-78 63.74
29/32 CSD-2932 65.53
SIZE ITEM # PRICE SIZE ITEM PRICE
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 11
DRILLS BITS
SIZE ITEM # PRICE
1/4 WS6-14 1.16
3/8 WS6-38 1.22
1/2 WS6-12 1.39
5/8 WS6-58 1.67
3/4 WS6-34 1.89
7/8 WS6-78 2.03
1 WS6-1 2.28
1-1/4 WS6-114 2.92
1-1/2 WS6-112 3.61
1/4”-1”
6 piece
set
WS6 8.02
SIZE ITEM # LENGTH PRICE
1/4 MD6-146 6 2.09
5/16 MD6-5166 6 2.40
3/8 MD6-386 6 3.13
5/8 MD6-586 6 5.74
1 MD6-1 6 10.46
SIZE ITEM # LENGTH PRICE
3/8 MD12-38 12 7.84
1/2 MD12-12 12 8.63
5/8 MD12-58 12 13.00
3/4 MD12-34 12 15.63
7/8 MD12-78 12 18.90
1 MD12-1 12 22.84
SIZE ITEM # LENGTH PRICE
1/2 MD18-12 18 12.53
5/8 MD18-58 18 16.06
3/4 MD18-34 18 17.95
7/8 MD18-78 18 26.21
1 MD18-1 18 32.37
12 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
HOLE SAWS, ACCESSORIES
ITEM # DESC. PRICE
HSKE-8 8-PIECE ELECTRICIANS KIT
includes 7/8, 1-1/8, 1-3/8, 1-3/4, 2
and 2-1/2 hole saws and 2 arbors
59.50
HSKM14 14-PIECE INDUSTRIAL KIT
includes 3/4, 7/8, 1, 1-1/4, 1-3/8, 1-
1/2, 1-3/4, 2, 2-1/4, 2-1/2, and 3
hole saws and 3 arbors
99.50
HSKP-8 8-PIECE PLUMBER’S KIT
includes 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4
and 2-1/4 hole saws and 2 arbors.
59.50
HSA1 3/8” shank hole saw adapter .Fits
hole saws 9/16”-1-1/8”
7.17
HSA2 7/16” shank hole saw adapter. Fits
hole saws 1-1/4”-6”
12.98
HSA4 7/16” shank hole saw adapter. Fits
hole saws 9/16”-1-1/8”
5.63
HSA10 3/8”shank hole saw adapter. Fits
hole saws 1-1/4”-6”0
12.63
SIZE ITEM # PRICE SIZE ITEM PRICE
5/8 HS58 5.72 2-1/4 HS214 9.73
11/16 HS1116 6.30 2-5/16 HS2516 9.68
3/4 HS34 5.72 2-3/8 HS238 9.74
13/16 HS1316 6.24 2-1/2 HS212 10.29
7/8 HS78 5.72 2-9/16 HS2916 10.29
15/16 HS1516 6.31 2-5/8 HS258 10.29
1 HS1 5.96 2-3/4 HS234 10.80
1-1/16 HS1116 7.49 2-7/8 HS278 10.71
1-1/8 HS118 5.96 3 HS3 10.72
1-3/16 HS1316 6.51 3-1/8 HS318 12.11
1-1/4 HS114 6.24 3-1/4 HS314 12.11
1-5/16 HS1516 7.65 3-3/8 HS338 12.54
1-3/8 HS138 6.46 3-1/2 HS312 13.04
1-7/16 HS1716 7.00 3-5/8 HS358 13.89
1-1/2 HS112 6.65 3-3/4 HS334 14.32
1-9/16 HS1916 6.96 3-7/8 HS378 15.96
1-5/8 HS158 7.39 4 HS4 16.78
1-11/16 HS11116 6.46 4-1/8 HS418 20.35
1-3/4 HS134 7.98 4-1/4 HS414 20.35
1-13/16 HS11316 7.94 4-1/2 HS412 20.95
1-7/8 HS178 8.05 4-3/4 HS434 23.25
2 HS2 8.30 5 HS5 25.72
2-1/16 HS2116 9.66 5-1/2 HS512 29.95
2-1/8 HS218 9.66 6 HS6 37.71
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 13
ANNULAR CUTTERS
Suitable for all drilling machines with ¾” drive. 3” and 4” also available. Please call for pricing.
Cutter
Diameter
1” Depth
Part #
Price 2” Depth
Part #
Price
7/16” 6-1-114 20.00 6-1-214 26.00
1/2” 6-1-116 21.50 6-1-216 28.50
9/16” 6-1-118 24.50 6-1-218 32.50
5/8” 6-1-120 26.00 6-1-220 35.00
11/16” 6-1-122 27.00 6-1-222 39.00
3/4” 6-1-124 28.00 6-1-224 43.00
13/16” 6-1-126 30.00 6-1-226 45.00
7/8” 6-1-128 32.00 6-1-228 48.00
15/16” 6-1-130 34.50 6-1-230 51.50
1” 6-1-132 37.00 6-1-223 56.00
1-1/16” 6-1-134 38.00 6-1-234 57.50
1-1/8” 6-1-136 44.00 6-1-236 66.00
1-3/16” 6-1-138 46.00 6-1-238 70.00
1-1/4” 6-1-140 47.00 6-1-240 71.50
1-5/16” 6-1-142 50.00 6-1-242 75.50
1-3/8” 6-1-144 64.00 6-1-244 79.00
CENTER PINS
Item # Description Price
7-3-102 1” center pin 9.50
7-3-201 2” center pin 9.50
7-3-302 3” center pin 16.41
14 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
RECIPROCATING, BLADES
ITEM# LENGTH WIDTH TEETH PRICE APPLICATION
RB414 4” 5/8” 14 1.50 Metal over 1/8”
RB418 4” 5/8” 18 1.50 Heavy-gauge metal/pipe/conduit
RB424 4” 5/8” 24 1.50 Thin metal tube/pipe under 18 gauge
RB614 6” 3/4” 14 1.62 Metal over 1/8”
RB618 6” 3/4” 18 1.62 Heavy-gauge metal/pipe/conduit
RB624 6” 3/4” 24 1.62 Thin metal tube/pipe under 18gauge
RB818 8” 3/4” 18 2.18 Metal over 18 gauge – long reach
RB814 8” 3/4” 14 2.18 Metal over 1/8” angle stock
RB1214 12” 3/4” 14 3.57 Metal over 1/8” – long reach
HACKSAW, BLADES AND FRAME ITEM# LENGTH WIDTH TEETH PRICE APPLICATION
HHSB14 12” 1/2” 14 1.20 Heavier metals, angles
HHSB18 12” 1/2” 18 1.20 Metal over 1/8”, pip, conduit
HHSB24 12” 1/2” 24 1.20 General purpose – 1/16” – 1/4”
HHSB32 12” 1/2” 32 1.20 Thin metal, fine cutting
JigSaw, BLADES
Wood Cutting – 1/4” Universal Shank
ITEM# LENGTH TEETH PRICE APPLICATION
JS6 3-1/2” 6 1.38 Thick wood, fast cutting
JS10 3-1/2” 10 1.38 Smooth cutting –wood
JSS10 3-1/2” 10 1.38 Wood scroll
Metal Cutting – 1/4” Universal Shank
ITEM# LENGTH TEETH PRICE APPLICATION
JS14 3” 14 1.38 Metal over 1/4”, plastic, fiber board
JS18 3” 18 1.38 Metal over 1/8”, conduit, tubing
JS24 3” 24 1.38 Thin metal, fine cutting, panels
JS32 3” 32 1.38 Extra-fine cutting
Woodcutting –Bosch Shank
ITEM# LENGTH TEETH PRICE APPLICATION
BJS6 3-3/4” 6 1.38 Fast cutting, thick material, wood
BJS10 3-3/4” 10 1.38 General purpose wood
BJS10S 3-3/4” 10 1.38 Smooth cut, scroll
Metal Cutting – Bosch Shank ITEM# LENGTH TEETH PRICE APPLICATION
BJS14 3” 14 1.38 Metal over 1/8” plastic, fiberglass
BJS18 3” 18 1.38 Metal over 18 gauge, plastic, fiberglass
BJS24 3” 24 1.38 Thin metal, fine cutting
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 15
GRINDING WHEELS, TYPE 27 DEPRESSED CENTER Camel Brand
USA made flap discs. Fastest grain removal in the marketplace for carbon based steels (26% more than the
competition).
Recommended for aggressive use and heavy duty applications.
Active grinding agent provides cool cutting with light pressure.
Premium Zirconia Aluminum grain with a poly/cotton heat treated backing
A: Aluminum Oxide ZA: Zirconia & Aluminum Oxide mixture
WA: White Aluminum Oxide
Right Angle Grinder
4 1/2” PART # DESCRIPTION SPEC. $ EACH
45002 4- 1/2” x .045 x 7/8 ZA60 $1.18
45004 4- 1/2” x .045 x 7/8 A46 $1.46
45103 4- 1/2” x .045 x 7/8” A60 $1.52
45003 4- 1/2" x .045 x 7/8” WA60 $1.40
45099 4- 1/2” x .045 x 7/8” A60 $1.92
70094 4- 1/2” x .075 (5/64) x 7/8 A46 $2.82
70095 4- 1/2” x .075 (5/54) x 5/8-11 A46 $4.10
45020 4- 1/2” x 3/32 x 7/8 A36 $1.47
45021 4- 1/2” x 3/32 x 5/8-11 A36 $3.68
45107 4- 1/2” x 1/8 x 7/8 A24R $1.35
45108 4- 1/2” x 1/8 x 5/8-11 A24R $2.63
35666 4- 1/2” x 1/8 x 7/8 A24T $1.84
35664 4- 1/2” x 1/8 x 5/8-11 A24T $3.13
36255 4- 1/2” x 1/4 x 7/8 A24R $1.17
36256 4- 1/2” x 1/4 x 5/8-11 A24R $2.32
5” PART # DESCRIPTION SPEC. $ EACH
45005 5 x .045 x 7/8 ZA60 $1.98
70114 5 x .045 x 7/8 A46 $1.76
45006 5 x .045 x 7/8 WA60 $1.62
70096 5 x .075 (5/64) x 7/8 A46 $2.96
70097 5 x .075 (5/64) x 5/8-11 A46 $4.25
45022 5 x 3/32 x 7/8 A36- $1.79
45023 5 x 3/32 x 5/8-11 A36- $3.07
35675 5 x 1/8 x 7/8 A24R l $1.63
35676 5 x 1/8 x 5/8-11 A24R $2.92
45200 5 x 1/8 x 7/8 A24T $1.79
45201 5 x 1/8 x 5/1-11 A24T $3.07
36257 5 x 1/4 x 7/8 A24R $1.33
36258 5 x 1/4 x 5/8-11 A24R $2.47
16 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
GRINDING WHEELS, TYPE 27 DEPRESSED CENTER USA made flap discs. Fastest grain removal in the marketplace for carbon based steels (26% more than
the competition).
Recommended for aggressive use and heavy duty applications. Right Angle Grinder
Active grinding agent provides cool cutting with light pressure.
Premium Zirconia Aluminum grain with a poly/cotton heat treated backing
A: Aluminum Oxide ZA: Zirconia & Aluminum Oxide mixture
WA: White Aluminum Oxide
6” PART # DESCRIPTION SPEC. $ EACH
45007 6 x .045 x 7/8 ZA60 $1.57
70115 6 x .045 x 7/8 A46 $2.06
45098 6 x .045 x 7/8 A60 $2.19
45017 6 x .045 x 7/8 WA60 $1.72
45024 6 x 3/32 x 7/8 A36 $2.40
35630 6 x 1/8 x 7/8 A24R $2.40
36224 6 x 1/8 x 5/8-11 A24R $2.76
36259 6 x 1/4 x 7/8 A24R $1.94
36260 6 x 1/4 x 5/8-11 A24R $2.96
7” PART # DESCRIPTION SPEC. $ EACH
45008 7 x 1/16 x 7/8 ZA60 $2.33
45009 7 x 1/16 x 7/8 WA60 $2.53
45026 7 x 3/32 x 7/8 A36 $2.73
45027 7 x 3/32 x 5/8-11 A36 $4.30
35634 7 x 1/8 x 7/8 A24R $2.42
36226 7 x 1/8 x 7/8 A24R $3.27
36229 7 x 1/8 x 7/8 A24T $1.99
36230 7 x 1/8 x 5/8-11 A24T $3.49
36261 7 x 1/4 x 7/8 A24R $2.16
36262 7 x 1/4 x 5/8-11 A24R $3.66
9” PART # DESCRIPTION PEC. $ EACH
45047 9 x 1/16 x 7/8 ZA60 $2.85
35648 9 x 1/8 x 7/8 A24R $2.89
35649 9 x 1/8 x 5/8-11 A24R $4.46
35662 9 x 1/8 x 7/8 A24T $3.63
35663 9 x 1/8 x 5/8-11 A24T $5.21
36263 9 x 1/4 x 7/8 A24R $3.46
36264 9 x 1/4 x 5/8-11 A24R $4.96
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 17
Camel Brand
CUT-OFF WHEELS, TYPE 1
PART # DESCRIPTION SPEC. $ EACH
2”
59111 2 x 1/32 x 3/8 A60 $ .60
59112 2 x 1/16 x 3/8 A60 $ .60
59113 2 x 1/8 x 3/8 A24 $ .60
3” PART # DESCRIPTION SPEC. $ EACH
59105 3 x 1/16 x 3/8 A36 $.70
45086 3 x 1/16 x 3/8 A60 $.70
59114 3 x 1/8 x 3/8 A24 $.70
59103 3 x 1/32 x 3/8 A60 .70
59105 3 x 1/16 x 3/8 A36 .70
4” PART # DESCRIPTION SPEC. $ EACH
59107 4 x 1/32 x 3/8 A60 $.70
59108 4 x 1/16 x 3/8 A36 $.70
45087 4 x 1/16 x 3/8 A60 $.1.17
59116 4 x 1/8 x 3/8 A24 $.73
36180 4 x 1/32 x 3/8 ZA60 $1.67
36178 4 x 1/16 x 3/8 ZA36 $1.96
Cut-Off Wheel Mandrel Adaptor
PART # DESCRIPTION SPEC. $ EACH
48227 1/4-3/8” MANDREL ADAPTOR Type 1 $ 5.82
48245 3/8” -24 MANDREL ADAPTOR Type 1 $ 4.86
A: Aluminum Oxide; ZA: Zirconia & Aluminum Oxide C: Silicon Carbide (stone/concrete)
WA: White Aluminum Oxide. 045 wheels extra thin for faster cutting with less resistance.
18 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
CUT-OFF WHEELS, TYPE 1 cont.
7” PART # DESCRIPTION SPEC. $ EACH
37573 7 x .045 x 5/8 A60 $2.59
37574 7 x .045 x 5/8 C30 $3.02
35573 7 x 3/32 x 5/8 A24 $2.66
35574 7 x 3/32 x 5/8 C24 $3.02
59109 7 x 3/32 x 5/8 A24 Fast Cut $1.60
59110 7 x 3/32 x 5/8 C24 Fast Cut $1.60
10” PART # DESCRIPTION SPEC. $ EACH
70111 10 x 1/7 x 5/8 A24 $2.99
35577 10 x 1/16 x 5/8 A24 $4.46
35579 10 x 1/8 x 5/8 A24 $4.49
35580 10 x 1/8 x 1 A24 $4.49
12” PART # DESCRIPTION SPEC. $ EACH
70105 12 x 1/8 x 1 A24 $3.47
35581 12 x 1/8 x 1 A24 $4.78
14” PART # DESCRIPTION SPEC. $ EACH
36233 14 x 1/8 x 1 A24 $3.79
35582 14 x 1/8 x 1 A24 $5.13
37671 14 x 1/8 x 1 C24 $6.38
45089 14 x 1/8 x 1 WA24 $6.38
16” PART # DESCRIPTION SPEC. $ EACH
70106 16 x 5/32 x 1 A24 $6.76
35584 16 x 5/32 x 1 A24 $11.85
18” PART # DESCRIPTION SPEC. $ EACH
70107 18 x 5/32 x 1 A24 $10.83
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 19
CUT-OFF WHEELS, TYPE 1 cont.
20” PART # DESCRIPTION SPEC. $ EACH
70108 20 x 5/32 x 1 A24 $15.53
70109 20 x 3/16 x 1 A24 $17.50
35851 20 x 7/32 x 1 A30 $35.99
CIRCULAR SAW BLADES
10-24-825B 8-1/4” 24 tooth carbide tip 5/8”arbor $11.43
10-40-825B 8-1/4” 40 tooth carbide tip 5/8” arbor $12.95
PORTABAND BLADES
61-051830 44 7/8” 24 tooth Porta-band blade $5.91
IRW3074002P25 44 7/8" 18 tooth Irwin Porta Band blade $5.91
BSB10 44 7/8 10 tooth PortaBand saw blade $5.91
STANDARD NON-WOVEN HAND PADS Engineered for surface preparation
Maroon pads for removing rust and corrosion and surface preparation and cleaning.
Green pads for cleaning all types of equipment, metal surfaces and durable surfaces.
White pads for cleaning sensitive surfaces, metal, Formica, solid surfaces, glass & mirror.
36241 Maroon, 6”x 9” hand pad- all purpose package of 10 $8.00
36242 Green, 6” x 9” hand pad- Medium duty package of 10 $8.00
36243 White, 6” x 9” hand pad- Light duty package of 10 $8.00
20 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
BENCH WHEELS, TYPE 1
PART # DESCRIPTION SPEC. $ EACH PART # DESCRIPTION SPEC. $ EACH
38001 6” x 1/2” x 1 A24 $11.68 38011 6 x 1 x 1” A24 $14.26
38003 6” x 1/2” x 1 A46 $11.68 38012 6 x 1 x 1” A36 $14.26
38004 6” x 1/2” x 1 A60 $11.68 38013 6 x 1 x 1” A46 $14.26
38005 6” x 1/2” x 1 A80 $11.68 38014 6 x 1 x 1” A60 $14.26
38015 6 x 1 x 1” A80 $14.26
38006 6 x 3/4” x 1 A24 $13.04 38016 7 x 1 x 1” A24 $16.79
38007 6 x 3/4” x 1 A36 $13.04 38017 7 x 1 x 1” A36 $16.79
38008 6 x 3/4” x 1 A46 $13.04 38018 7 x 1 x 1” A46 $16.79
38009 6 x 3/4” x 1 A60 $13.04 38019 7 x 1 x 1” A60 $16.79
38010 6 x 3/4” x 1 A80 $13.04 38020 7 x 1 x 1” A80 $16.79
38021 8 x 1 x 1” A24 $20.63 38026 10 x 1 x 1-1/4” A24 $34.39
38022 8 x 1 x 1” A36 $20.63 38027 10 x 1 x 1-1/4” A36 $34.39
38023 8 x 1 x 1” A46 $20.63 38028 10 x 1 x 1-1/4” A46 $34.39
38024 8 x 1 x 1” A60 $20.63 38029 10 x 1 x 1-1/4” A60 $34.39
38025 8 x 1 x 1” A80 $20.63 38030 10 x 1 x 1-1/4” A80 $34.39
38031 10 x 1-1/2 x 1-1/4” A24 $44.22 38036 12 x 1 x 1-1/4” A24 $54.04
38032 10 x 1-1/2 x 1-1/4 A36 $44.22 38038 12 x 1 x 1-1/4” A46 $54.04
38033 10 x 1-1/2 x 1-1/4 A46 $44.22 38039 12 x 1 x 1-1/4” A60 $54.04
38034 10 x 1-1/2 x 1-1/4 A60 $44.22
38035 10 x 1-1/2 x 1-1/4 A80 $44.22 38041 12 x 1-1/2” x 1-1/4” A24 $67.72
38042 12 x 1-1/2” x 1-1/4” A36 $67.72
38043 12 x 1-1/2” x 1-1/4” A46 $67.72
38044 12 x 1-1/2” x 1-1/4” A60 $67.72
A: Aluminum Oxide, GC: Green Silicon Carbide, AZ: Premium Blue Aluminum Oxide, WA:
White Aluminum Oxide
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 21
FLAP WHEELS 1/4” SHANK Made with premium aluminum oxide grain. Grits 120 through 320
available upon request.
PART # DESCRIPTION SPEC. $ EACH
39903 1”x 5/8” x 1/4” A60 $2.10
39904 1”x 5/8” x 1/4” A80 $2.10
39907 1” x 1” x 1/4” A40 $1.50
39908 1” x 1” x 1/4” A60 $1.50
39909 1” x 1” x 1/4” A80 $1.50
39915 1-1/2” x 1/2” x 1/4” A60 $1.63
39916 1-1/2” x 1/2” x 1/4” A80 $1.63
39920 1-1/2” x 1” x 1/4” A40 $1.80
39921 1-1/2” x 1” x 1/4” A60 $1.80
39922 1-1/2” x 1” x 1/4” A80 $1.80
39924 2” x 1/2” x 1/4” A40 $2.00
39925 2” x 1/2” x 1/4” A60 $2.00
39926 2” x 1/2” x 1/4” A80 $2.00
39931 2” x 1” x 1/4” A40 $2.12
39932 2” x 1” x 1/4” A60 $2.12
39933 2” x 1” x 1/4” A80 $2.12
41015 2-1/2” x 1/2” x 1/4” A60 $2.50
41016 2-1/2” x 1/2” x 1/4” A80 $2.50
39941 2-1/2” x 1” x 1/4” A60 $2.96
39942 2-1/2” x 1” x 1/4” A80 $2.96
41121 2-1/2” x 1-1/2” x 1/4” A60 $3.59
41122 2-1/2” x 1-1/2” x 1/4” A80 $3.59
41018 3” x 1/2” x 1/4” A60 $3.13
41019 3” x 1/2” x 1/4” A80 $3.13
39947 3” x 1” x 1/4” A40 $3.27
39948 3” x 1” x 1/4” A60 $3.27
39949 3” x 1” x 1/4” A80 $3.27
41513 3” x 1-1/2” x 1/4” A60 $4.92
41514 3” x 1-1/2” x 1/4” A80 $5.22
41044 3” x 2” x 1/4” A40 $5.51
39954 3” x 2” x 1/4” A60 $5.51
22 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
FLAP DISCS
Z/A - Zirconia alumina coated, for high-alloyed steel, stainless steel and heat-treated steel. Recommended for aggressive use and heavy duty application.
Grits 80 and 120 also available.
TYPE 27 TYPE 29
PART # PART # DESCRIPTION GRIT PRICE
42300 42320 4-1/2 x 7/8 24 $3.50
41701 41721 4-1/2 x 7/8 36 $2.86
41702 41722 4-1/2 x 7/8 40 $2.86
41704 41724 4-1/2 x 7/8 60 $2.86
42310 42330 4-1/2 x 5/8-11 24 $4.50
41711 41731 4-1/2 x 5/8-11 36 $4.50
41712 41732 4-1/2 x 5/8-11 40 $4.50
41714 41734 4-1/2 x 5/8-11 60 $4.50
42500 42520 5 x 7/8 24 $3.79
42501 42521 5 x 7/8 36 $3.79
42502 42522 5 x 7/8 40 $3.79
42504 42524 5 x 7/8 60 $3.79
42510 SM 5 x 5/8-11 24 $4.79
42511 42531 5 x 5/8-11 36 $4.79
42512 42532 5 x 5/8-11 40 $4.79
42514 42535 5 x 5/8-11 60 $4.79
53001 53021 6 x 7/8 36 $4.79
53002 53022 6 x 7/8 40 $4.79
53004 53024 6 x 7/8 60 $4.89
53011 53031 6 x 5/8-11 36 $5.89
53012 53032 6 x 5/8-11 40 $5.89
53014 53034 6 x 5/8-11 60 $5.89
42700 42720 7 x 7/8 24 $6.98
41941 41961 7 x 7/8 36 $5.75
41942 41962 7 x 7/8 40 $5.75
41944 41964 7 x 7/8 60 $5.75
41951 41971 7 x 5/8-11 36 $7.32
41952 41972 7 x 5/8-11 40 $7.32
41954 41974 7 x 5/8-11 60 $7.32
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 23
FIBER DISCS
PART # DESCRIPTION SPEC. $ EACH
48011 4-1/2” x 7/8” Box of 25 24 grit $18.75
48014 4-1/2” x 7/8” 50 grit $18.75
48015 4-1/2” x 7/8” 60 grit $18.75 48021 5” x 7/8” 24 grit $20.00
48024 5” x 7/8” 50 grit $20.00
40825 5” x 7/8” 60 grit $20.00
48031 7” x 7/8” 24 grit $26.00
48034 7” x 7/8” 50 grit $26.00
48035 7” x 7/8” 60 grit $26.00
CAMEL BRAND
Back-up Pads
PART # DESCRIPTION/ SPEC. $ EACH
MEDIUM
36204 4 1/2” $7.48
48225 5” $8.91
48222 7” $19.28
Aluminum Oxide designed for long life. 7” discs are available with a depressed center which increases the
amount of disc that can be used. Must be used with back-up pads.
Use with coarse grits
Spiral ribs provide contact points and form channels for air flow, extending disc life 30% - 50%.
24 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
CARBIDE BURS, 1/4” SHANK
PART # DESCRIPTION (diameter x length) $ EACH
62319 1/4x5/8” SA-1 Double Cut Flat Head 7.14
62323 1/4x3/4” SA-3 Double Cut Flat Head 8.92
62328 1/2”x1” SA-5 Double Cut Flat Head 15.09
62330 5/8”x1” SA-6 Double Cut Flat Head 20.50
62333 3/4”x1” SA-7 Double Cut Flat Head 30.80
62377 1/4x5/8” SC-1 Double Cut Cylinder Shape 7.68
62381 3/8x3/4” SC-3 Double Cut Cylinder Shape 9.88
62386 1/2”x1” SC-5 Double Cut Cylinder Shape 15.09
62388 5/8x1” SC-6 Double Cut Cylinder Shape 20.70
62391 3/4x1” SC-7 Double Cut Cylinder Shape 27.90
62404 1/4” SD-1 Double Cut Round Ball 7.97
62407 3/8” SD-3 Double Cut Round Ball 8.64
62410 1/2” SD-5 Double Cut Round Ball 11.67
62412 5/8” SD-6 Double Cut Round Ball 15.67
62413 3/4” SD-7 Double Cut Round Ball 21.95
62423 1/4x3/8” SE-1 Double Cut Oval/Egg 8.24
62425 3/8x5/8” SE-3 Double Cut Oval/Egg 12.36
62427 1/2x7/8” SE-5 Double Cut Oval/Egg 14.00
62429 5/8x1” SE-6 Double Cut Oval/Egg 24.42
62440 1/4x5/8” SF-1 Double Cut Rounded Tree 8.09
62442 3/8x3/4” SF-3 Double Cut Rounded Tree 10.42
62446 1/2x1” SF-5 Double Cut Rounded Tree 15.09
62448 5/8x1” SF-6 Double Cut Rounded Tree 24.01
62449 3/4x1” SF-7 Double Cut Rounded Tree 31.56
62462 1/4x5/8” SG-1 Double Cut Pointed Tree 8.09
62465 3/8x3/4” SG-3 Double Cut Pointed Tree 10.84
62468 1/2x1” SG-5 Double Cut Pointed Tree 15.09
62505 1/4x5/8” SL-1 Double Cut Radius Cone 8.09
62508 3/8x 1-1/16” SL-3 Double Cut Radius Cone 12.36
62502 1/2x1-1/8” SL-4 Double Cut Radius Cone 17.02
62511 5/8x1-3/16” SL-5 Double Cut Radius Cone 31.56
62522 1/4x1/2” SM-1 Double Cut Pointed Cone 7.97
62524 1/4”x1” SM-3 Double Cut Pointed Cone 8.24
62526 1/2”x7/8” SM-5 Double Cut Pointed Cone 15.64
Double Cut designed to produce smaller chips for faster cutting action. For stainless steel and ferrous
materials. 1/8” shank available upon request.
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 25
BRUSHES, CARBON STEEL
PART # DESCRIPTION (diameter x length) $ EACH
BRUSHES 60226 1” Pure bristle wood handle paint brush 1.25
60227 1-1/2” Pure bristle wood handle paint brush 1.75
60228 2” Pure bristle wood handle paint brush 2.05
60229 3” Pure bristle wood handle paint brush 2.85
60201 3x19 row scratch brush 1.90
60205 4 x 16 row scratch brush 2.40
END BRUSHES
60578 1” KNOTTED END CARBON .020 WITH 1/4” SHANK 6.19
60592 1”CRIMPED END CARBON .020 WITH 1/4” SHANK 6.50
CRIMPED CUP 60560 3” CUP CRIMP CARBON .014X5/8-11” 6.19
60561 3” CUP CRIMP STAINLESS .014X5/8-11” 13.63
60562 4” CUP CRIMP CARBON .020X5/8-11” 8.89
60563 4” CUP CRIMP STAINLESS .014X5/8-11” 22.92
60564 6” CUP CRIMP CARBON .020X5/8-11” 23.55
60565 6” CUP CRIMP STAINLESS .020X5/8-11” 39.04
KNOT WIRE CUP 60500 3” KNOT WIRE CARBON .014X1/2-3/8” 7.44
60501 3” KNOT WIRE STAINLESS .014X1/2-3/8” 12.88
60502 4” KNOT WIRE CARBON .020X5/8-11” 7.44
60503 5” KNOT WIRE CARBON .020X5/8-11” 10.65
60505 6” KNOT WIRE CARBON . .020X5/8-11” 11.38
CRIMPED WHEEL 60171 3” CRIMPED CARBON W/SHANK .014 w/ 1/4” shank 6.02
60172 3” CRIMPED STAINLESS W/SHANK .014 w/ 1/4” shank 11.04
60150 4” RADIAL CARBON .014X5/8-11” 10.90
60190 6” RADIAL CARBON .014X1/2-5/8” 20.18
TWISTED WHEEL 60001 4” KNOT WIRE CARBON .014 x 5/8-11 11.40
60006 4” KNOT WIRE STAINLESS .014 x 5/8-11 15.66
60013 5” KNOT WIRE CARBON .020 X 5/8-11 18.10
60052 6” KNOT WIRE CARBON .020 X 5/8-11 19.19
60055 6” KNOT STAINLESS .016 X 5/8-1/2 31.40
26 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
CUTTING & WELDING
ITEM# DESCRIPTION PRICE
KH370 Airco Style cutting & welding kit $280.00
KL79 Harris Style cutting & welding kit 290.00
WURKS-V Victor style cutting & welding kit 280.00
90 DEGREE TORCHES
ITEM# DESCRIPTION PRICE
54A-21 Airco Style 21” $150.00
40A-21 Harris Style 21” 160.00
830-21 Victor Style 21” 160.00
CA370 Airco Style cutting attachment 120.00
CA43A Harris Style cutting attachment 120.00
780A Victor Style cutting attachment 125.00
98L9 Airco Style handle 105.00
43L9 Harris Style handle 105.00
WH360 Victor Style handle 95.00
GAS REGULATORS
RVT8010 Uniweld Oxygen 2 Stage regulator 185.00
RVT8011 Uniweld Acetylene 2 Stage regulator 185.00
MR8210 Uniweld Oxygen single stage regulator 79.00
MR8211 Uniweld Acetylene single stage regulator 79.00
MR8212 Uniweld Mapp single stage regulator 79.00
FUEL GAS KITS
WB500 Propane Weed Burner 500,000 BTU 69.00
89600 Air Acetylene twister kit 170.00
KT2LP4 LP outfit includes Regulator Handle, 12’ 154.00
Hose, & two tips
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 27
CUTTING TIPS
VICTOR STYLE
ITEM# DESCRIPTION PRICE
1-101-(size) Oxygen/Acetylene 6 hole sizes (000-8) $5.22
1-112-(size) Oxygen/Acetylene 3 hole (00-4) 17.01
1-118-(size) Oxygen/Acetylene 6 hole 18.28
1-200-(size) Oxygen/Fuel Gas Single Piece 8 hole 14.00
AIRCO STYLE
ITEM# DESCRIPTION PRICE
144-(size) Oxygen/Acetylene 4 hole Medium Preheat (sizes 00-8) $6.00
164-(size) Oxygen/Acetylene 6 hole Heavy Preheat (sizes 00-10) 6.00
183-(size)` Oxygen/Acetylene 6 hole Bent Gouging 34.00
AFS-(size) Oxygen/Fuel Gas Single Piece sizes 31-71 12.50
ASP-(size) Oxygen/Fuel Gas Two Piece 8 preheats, sizes 31-72 10.50
HARRIS STYLE
ITEM# DESCRIPTION PRICE
6290A-(size) Oxygen/Acetylene 6 hole Sizes 00-6 $7.00
6290G-(size) Single piece 34.00
6290VVC-(size) Oxygen/fuel gas Two Piece sizes 40-75 11.00
28 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
TWIN WELDING HOSE ITEM# DESCRIPTION PRICE
H12 12-1/2’ 3/16 Single Acetylene Hose Grade R 17.00
H43B 25’ 1/4” Twin Hose Grade R Oxyacetylene 19.00
H44B 50’ 1/4” Twin Hose Grade R Oxyacetylene 33.00
H100B 100’ 1/4” Twin Hose Grade R Oxyacetylene 60.00
H32BT 12-1/2’ Oxy LP Gas 3/16” Grade T Twin Hoses 20.00
HT43B 25’ Oxy LP Gas 1/4” Grade T Twin Hoses 28.00
HT44B 50’ Oxy LP Gas 1/4” Grade T Twin Hoses 50.00
HT100B 100’ Oxy LP Gas 1/4” Grade T Twin Hoses 85.00
FLASH & FLOW ARRESTORS
TFA100 Torch Style Flash Arrestors Oxygen & Acetylene/Fuel Gas 31.00
RFA100 Regulator Style Flash Arrestors Oxygen & Acetylene/Fuel Gas 33.00
TCV100 Torch Check Valve Oxygen & Acetylene/Fuel Gas 11.92
RCV100 Regulator Check Valve Oxygen & Acetylene/Fuel Gas 12.52
OXY/FUEL GAS, ACCESSORIES
FL34 Single Flint Striker 2.30
FL37 One 5 Flint Renewal 1.50
FL3437TC Single Lighter, w/ 5 Flint Renewals and standard Tip Cleaner 6.56
FL35 Triple Flint Striker 2.85
FL36 One triple flint renewal for FL35 lighter 3.00
FL3536TC Triple Lighter with/Triple Flint Renewal and standard Tip Cleaner 7.75
SSRDK Round Soapstone 6 piece Kit includes holder 3.45
SSRD Round Soapstone Replacements 9.30
SSFLATK Flat Soapstone 6 piece Kit includes holder 2.50
SSFLAT Flap Soapstone Replacements 9.30
W05 B & MC Tank Box Wrench 3.50
W94 BC & MC Combination Wrench for “A” fittings 6.72
HRK26 Hose Repair Kit “B” size hose fittings for 1/4” I.D. hose 65.00
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 29
TIG
WELDING TORCHES
ITEM# DESCRIPTION PRICE
#9 130 Amp Flexible Air Cooled
TM 9F-12R-S Tig Torch Pack TM9F 130A 12’ 1 pc. cable $45.00
TM 9F-25R-S Tig Torch Pack TM9F 130A 25’ 1 pc. cable 66.00
TM 9FV-12R-S Tig Torch Pack w/Valve TM9FV 130A 12’ 1 pc. cable 53.00
TM 9FV-25R-S Tig Torch Pack w/Valve TM9FV 130A 25’ 1 pc. cable 68.49
#17 150 Amp Flexible Air Cooled
TM 17F-12R-S Tig Torch Pack TM17F 150A 12’ 1 piece cable 60.00
TM 17F-25R-S Tig Torch Pack TM17F 150A 25’ 1 piece cable 73.00
TM 17FV-12R-S Tig Torch Pack w/Valve TM17FV 150A 12’ 1 pc. cable 62.00
TM 17FV-25R-S Tig Torch Pack w/Valve TM17FV 150A 25’ 1 pc. cable 74.00
#25 250 Amp Flexible Air Cooled
TM 20-25-S Tig Torch Pack TM20 25A 25’ Water Cooled 75.40
#25 350 Amp Flexible Air Cooled
TM 18-25-S Tig Torch Pack TM20 350A 25’ Water Cooled 79.61
#26 200 Amp Flexible Air Cooled
TM 26FV-12R-S Tig Torch Pack w/Valve TM25FV 200A 12’1 piece cable 81.84
TM 26FV-25R-S Tig Torch Pack w/Valve TM25FV 200A 25’1 piece cable 111.70
TIG GAS HOSE ASSEMBLY
TM 40V77 Hose Assy. Gas 12’ TM18 Ext. 18.00
TM 41V30R Hose Assy. Gas 25’ TM18, 26 23.23
30 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
TIG POWER CABLES ITEM# DESCRIPTION PRICE
TM 57Y01R Power Cable Assembly 12’ suit TM9,17 $28.00
TM 57Y03R Power Cable Assembly 25’ suit TM9, 17 $42.00
TM 46V28R Power Cable Assembly 12’ suit TM26 $44.00
TM 46V30R Power Cable Assembly 25’ suit TM26 $74.00
TM 56Y38R Power Cable Assembly 12’ suite TM24 $33.00
TM 56Y97R Power Cable Assembly 25’ suite TM24 $58.00
POWER CABLE ADAPTORS
TM 105Z57 Adaptor Power suit TM9, 17 $5.60
TM 45V62 Adaptor Power suit TM26 $9.00
FLOWMETER
REG10FL SGC-580 Flow meter 0-60 SCFH $55.00
TORCH INSULATORS
TM 18-7 Back Cap Gasket suit TM 17, 18, 26 $1.95
TM 18CG Gasket – Cup suit TM 17, 18, 26 $1.95
TM 53N66 Insulator – Gas Lens Suite TM 24 $2.35
TORCH BACK CAPS
TM 41V24 Back Cap Long suit TM 9,20 $1.75
TM 41V35 Back Cap Medium suit TM 9, 20 $1.65
TM 41V33 Back Cap Short suit TM 9,20 $1.55
TM 57Y02 Back Cap Long suit TM17, 18, 26 $1.25
TM 57Y04 Back Cap Short suit TM 17, 18, 26 $1.15
TORCH HANDLES
H-100R Ribbed handle for # 9, 17 & 24 torches $3.30
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 31
TIG CUPS, GAS LENS ALUMINA
ITEM# DESCRIPTION PRICE
54N14 #8 1/2” Pink #17, 18, &26 Torch cup 1.10
54N15 #7 7/16” Pink #17, 18, & 26 Torch cup 1.10
54N16 #6 3/8” Pink #17, 18, & 26 Torch cup 1.10
54N17 #5 5/16” Pink #17, 18, & 26 Torch cup 1.10
54N18 #4 1/4” Pink #17, 18, & 26 Torch cup 1.10
57N75 #6 3/8” Large Pink #17, 18, &26 Torch cup 2.30
57N74 #8 1/2” Large Pink #17, 18, &26 Torch cup 2.30
53N58 #4 1/4” Pink #9, 20, & 24 Torch cup 1.00
53N59 #5 5/16”Pink #9, 20, & 24 Torch cup 1.00
53N60 #6 3/8” Pink #9, 20, & 24 Torch cup 1.00
53N61 #7 7/16”Pink #9, 20, & 24 Torch cup 1.00
TIG CUPS, STANDARD ALUMINA
10N44 #12 3/4” Pink #17, 18, & 26 Torch cup 1.00
10N45 #10 5/8”Pink #17, 18, & 26 Torch cup 1.00
10N46 #8 1/2” Pink #17, 18, & 26 Torch cup 1.00
10N47 #7 7/16” Pink #17, 18, & 26 Torch cup 1.00
10N48 #6 3/8” Pink #17, 18, & 26 Torch cup 1.00
10N49 #5 5/16” Pink #17, 18, & 26 Torch cup 1.00
10N50 #4 1/4” Pink #17, 18, & 26 Torch cup 1.00
13N08 #4 1/4” Pink #9, & 20 Torch cup 1.00
13N09 #5 5/16” Pink #9, & 20 Torch cup 1.00
13N10 #6 3/8” Pink #9, & 20 Torch cup 1.00
13N11 #7 7/16” Pink #9, & 20 Torch cup 1.00
13N 12 #8 1/2” Pink #9, & 20 Torch cup 1.00
13N13 #10 5/8” Pink #9, & 20 Torch cup 1.00
53N24 #4 1/4” Pink #24 Torch cup 2.60
53N25 #5 5/16” Pink #24 Torch cup 2.60
53N27 #6 3/8” Pink #24 Torch cup 2.60
TIG, STARTER KITS AK-3 For 18 & 26 series torches. Collets and collet bodies and tungsten in sizes 1/16”, 3/32, 1/8. $32.00
Also includes standard alumina cups in sizes #5,6,7
AK-4 For 20 series torches. Collets and collet bodies and tungsten in sizes 1/16”, 3/32”, 1/8”. $41.00
Also includes standard alumina cups in sizes # 5, 6, 7.
AK-5 For 24 series torches. Collets and collet bodies and tungsten in sizes .040, 1/16”. Also includes $23.00
standard alumina cups in sizes # 4, 5, 6
32 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
ITEM# DESCRIPTION PRICE
COLLETS
10N23 1/16” Copper Collet for #17, 18 & 26 torches .75
10N24 3/32” Copper Collet for #17, 18 & 26 torches .75
10N25 1/8” Copper Collet for #17, 18 & 26 torches .75
10N20 5/32”Copper Collet for #17, 18 & 26 torches 1.00
10N24S 3/32” Short Copper Collet for #17, 18 & 26 torches 1.50
10N25S 1/8” Short Copper Collet for #17, 18 & 26 torches 1.50
13N22 1/16” Copper Collet for #9 torches .75
13N23 3/32” Copper Collet for #9 torches .75
13N24 1/8” Copper Collet for #9 torches .75
53N14 1/16” Copper Collet for #24 torches 1.25
24C332 3/32” Copper Collet for #24 torches 1.25
53N64 1/16” Copper Collet for #24 torches 1.30
24GLC332 3/32” Copper Collet for #24 torches 1.30
COLLET BODIES GAS LENS
45V25 1/16” Copper Gas Lens for #17, 18 & 26 torches 3.75
45V26 3/32” Copper Gas Lens for #17, 18 & 26 torches 3.75
45V27 1/8” Copper Gas Lens for #17, 18 & 26 torches 3.75
45V28 5/32” Copper Gas Lens for #17, 18 & 26 torches 3.75
45V64 3/32” Large Copper Gas Lens for #17, 18 & 26 torches 5.50
995795 1/8” Large Copper Gas Lens for #17, 18 & 26 torches 5.50
45V43 1/16” Copper Gas Lens for #9 torches 3.20
45V44 3/32” Copper Gas Lens for #9 torches 3.20
45V45 1/8” Copper Gas Lens for #9 torches 3.20
COLLET BODIES
10N28 1/8” Copper Collet Body for #17, 18, & 26 torches 2.00
10N31 1/16” Copper Collet Body for #17, 18, & 26 torches 2.00
10N32 3/32” Copper Collet Body for #17, 18, & 26 torches 2.00
10N33 5/32” Copper Collet Body for #17, 18, & 26 torches 2.00
17CB20 3/32” & 1/8” Small Copper Collet Body for #17, 18, & 26 torches 1.50
13N27 1/16” Copper Collet Body for #9 torches 1.30
13N28 3/32” Copper Collet Body for #9 torches 1.30
13N29 1/8” Copper Collet Body for #9 torches 1.30
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 33
CABLE COVERS WC4-10 4”x10’ Woven Tig cover with Zipper $15.89
WC4-23 4”x22’ Woven Tig cover with Zipper $54.00
WC4-23L 4”x23’ Leather cover with snaps $83.00
7” TUNGSTEN, ELECTRODES
1/16” 3/32” 1/8” 5/32”
07WP-(size) Pure Tungsten Electrode 10/pkg. Green 12.00 23.95 38.95 75.95
07WTH-(size) 2% Thoriated Tungsten Electrode Red 12.00 23.95 38.95 90.95
07WL15-(size) 1.5% Lanthanated Tungsten Electrode Gold 12.00 23.95 39.95 82.95
07WC-(size) 2% Ceriated Tungsten Electrode Orange 12.00 23.95 44.00 82.95
1/16” 3/32” 1/8” 5/32”
ER4043 Aluminum 4043 Alloy $7.35 6.95 6.75 6.75
ER5356 Aluminum 5356 Alloy $5.35 4.95 4.75 4.75
ER308L-(size) Stainless Steel ER308L $6.50 6.15 5.90 5.90
ER309-(size) Stainless Steel ER309 $9.35 8.95 8.75 8.75
WE309L-(size) Stainless Steel ER309L $9.35 8.95 8.75 8.75
ER312-(size) Stainless Steel ER312 $14.35 13.95 13.75 13.75
ER316L-(size) Stainless Steel ER316L $ 9.35 8.95 8.75 8.75
ER317L-(size) Stainless Steel ER317L $13.35 12.95 12.75 12.75
ER320-(size) Stainless Steel ER320 $32.35 31.95 31.75 31.75
ER347-(size) Stainless Steel ER347 $11.35 10.95 10.75 10.75
ERTI1 36” Titanium Grade Ti-1 $76.50 68.50 66.95 66.95
ERTI2 36” Titanium Grade Ti-2 $76.50 68.50 66.95 66.95
ER70S2-(size) Mild Steel ER70S2 $3.35 2.95 2.75 2.75
ER70S3-(size) Mild Steel ER70S3 $3.35 2.95 2.95 2.75
ER70S6-(size) Mild Steel ER70S6 $3.15 2.75 2.55 2.55
ER80SB2-(size) Mild Steel ER80SB2 $4.95 4.55 4.35 4.35
ER80SD2-(size) Mild Steel ER80SD2 $4.95 4.55 4.35 4.35
ER90SB3-(size) Mild Steel ER90SB3 $5.95 5.55 5.35 5.35
34 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
MIG GUNS
Choosing the right MIG gun can have a big impact on your comfort level and muscle fatigue throughout the course
of the work day. Selecting the lightest, most flexible MIG gun for the application is the best choice. In the case of
a 400-amp application, a MIG gun rated at 300 amps may suffice. As when selecting MIG gun or a handle, a good
rule of thumb is also to select the smallest and shortest power cable possible that can still meet the needs of the
application. Smaller and shorter power cables are lighter and more flexible and can, therefore, reduce operator
fatigue. They can also minimize clutter in the work space and prevent excessive coiling that may be cumbersome
for the welding operator to rectify and that could also lead to poor wire feeding. An added advantage is that smaller
and shorter cables tend to be less expensive, as well.
ITEM# DESCRIPTION PRICE
Please specify: L-Lincoln, M-Miller, E-Euro Connector
T200-3545-10- 200 Amp Tweco Style w/10’ cable $147.00
T200-3545-12- 200 Amp Tweco Style w/12’ cable $151.00
T200-3545-15- 200 Amp Tweco Style w/15’ cable $158.00
T300-3545-10- 300 Amp Tweco Style w/10’ cable $165.00
T300-3545-15- 300 Amp Tweco Style w/15’ cable $175.00 T300-3545-25- 300 Amp Tweco Style w/25’ cable $195.00
T400-3545-10- 400 Amp Tweco Style w/10’ cable $165.00
T400-3545-15- 400 Amp Tweco Style w/15’ cable $175.00
T400-3545-25- 400 Amp Tweco Style w/25’ cable $185.00
B200-3545-10- 200 Amp Bernard Style w/10’ cable $155.00
B200-3545-12- 200 Amp Bernard Style w/12’ cable $159.00
B200-3545-15- 200 Amp Bernard Style w/15’ cable $165.00
B300-3545-10- 300 Amp Bernard Style w/10’ cable $165.00
B300-3545-15- 300 Amp Bernard Style w/15’ cable $175.00
B300-3545-25- 300 Amp Bernard Style w/25’ cable $195.00
B400-3545-10- 400 Amp Bernard Style w/10’ cable $174.00
B400-3545-15- 400 Amp Bernard Style w/15’ cable $154.00
B400-3545-25- 400 Amp Bernard Style w/25’ cable $203.00
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 35
CONTACT TIPS
BERNARD
ITEM# DESCRIPTION PRICE
1588 Contact Tip Long 0.030” suit all models .70
1589 Contact Tip Long 0.035” suit all models .70
1590 Contact Tip Long 0.045” suit all models .70
1591 Contact Tip Long 1/16” suit all models .70
1592 Contact Tip Long 5/64” suit all models .70
7497 Contact Tip Short 0.023” suit all models .50
7488 Contact Tip Short 0.030” suit all models .50
7489 Contact Tip Short 0.035” suit all models .50
7490 Contact Tip Short 0.045” suit all models .50
7498 Contact Tip Short Alum 3/64” suit all models .50
7491 Contact Tip Short 1/16” suit all models .50
7492 Contact Tip Short 5/64” suit all models .50
4285 Contact Tip Tapered 0.030” suit all models .70
4281 Contact Tip Tapered 0.035” suit all models .70
4282 Contact Tip Tapered 0.045” suit all models .70
4283 Contact Tip Tapered 0.052” suit all models .70
4280 Contact Tip Tapered 1/16” suit all models .70
TWECO
11-23 Contact Tip Std Duty 0.023” suit TW1, Mini .35
11-30 Contact Tip Std Duty 0.030” suit TW1, Mini .35
11-35 Contact Tip Std Duty 0.035” suit TW1, Mini .35
11-45 Contact Tip Std Duty 0.040” suit TW1, Mini .35
11T-23 Contact Tip Tapered .023” suit TW1, Mini .35
11T-30 Contact Tip Tapered .030 suit TW1, Mini .35
11T-35 Contact Tip Tapered .035 suit TW1, Mini .35
11T-40 Contact Tip Tapered .040 suit TW1, Mini .35
11T-45 Contact Tip Tapered .045 suit TW1, Mini .35
14-23 Contact Tip Std Duty 0.023” suit TW2,4 .38
14-30 Contact Tip Std Duty 0.030” suit TW2,4 .38
14-35 Contact Tip Std Duty 0.035” suit TW2,4 .38
14-45 Contact Tip Std Duty 0.045” suit TW2,4 .38
14-564 Contact Tip Hvy Duty 5/64” suit TW2,4 .38
14-52 Contact Tip Std Duty 0.052” suit TW2,4 .38
14-116 Contact Tip Std Duty 1/16” suit TW2,4 .38
36 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
TWECO, Cont.
ITEM# DESCRIPTION PRICE
14H-30 Contact Tip Hvy Duty 0.030” suit TW2,4 .48
14H-35 Contact Tip Hvy Duty 0.035” suit TW2,4 .48
14H-45 Contact Tip Hvy Duty 0.045” suit TW2,4 .48
14AH-364 Contract Tip Hvy Duty Alum 3/64” suit TW5 .48
14H-52 Contact Tip Hvy Duty 0.052” suit TW5 .48
14H-116 Contact Tip Hvy Duty 1/16” suit TW2,4 .48
14T-30 Contact Tip Tapered 0.030” suit TW2,4 .60
14T-35 Contact Tip Tapered 0.035” suit TW2,4 .60
14T-45 Contact Tip Tapered 0.045” suit TW2,4 .60
14T-52 Contact Tip Tapered 0.052” suit TW2,4 .60
15H-35 Contact Tip Hvy Duty 0.035” suit TW5 .85
15H-45 Contact Tip Hvy Duty 0.045” suit TW5 .85
15AH-364 Contact Tip Hvy DutyAlum 0.035” suit TW5 .85
15H-52 Contact Tip Hvy Duty 0.052” suit TW5 .85
15H-116 Contact Tip Hvy Duty 1/16” suit TW5 .85
15AH-116 Contact Tip Alum 1/16” suit TW5 .85
15H-564 Contact Tip Hvy Duty 5/64” suit TW5 .85
15HFC-35 Contact Tip Hvy Duty 0.035” F/C suit TW5 .85
15HFC-45 Contact Tip Hvy Duty 0.045” F/C suit TW5 .85
15HFC-116 Contact Tip Hvy Duty 1/16” F/C suit TW5 .85
15HFC-564 Contact Tip Hvy Duty 5/64” F/C suit TW5 .85
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 37
MIG NOZZLES
BERNARD
ITEM# DESCRIPTION PRICE
4391 Gas Nozzle HD Straight suit BE200, 300 $3.70
4392 Gas Nozzle HD Tapered suit BE200, 300 3.70
4491 Gas Nozzle HD Straight suit BE400, 500 4.20
4492 Gas Nozzle HD Tapered suit BE400, 500 4.20
4295 Gas Nozzle Tapered suit BE200, 300 4.20
TWECO
21-50 Gas Nozzle Std Duty 1/2” suit TW1, Mini 3.80
21-62 Gas Nozzle Std Duty 5/8” suit TW1, Mini 3.80
21-37F Nozzle Flush 3/8”
21-50F Gas Nozzle Flush 1/2" suit TW1, Mini 3.80
21-62F Gas Nozzle Flush 5/8" suit TW1, Mini 3.80
22-50 Gas Nozzle Std Duty 1/2” suit TW2 2.00
22-62 Gas Nozzle Std Duty 5/8” suit TW2 2.00
22-50SS Gas Nozzle Short Stop 1/2” suit TW2 2.00
23-50F Gas Nozzle Screw On Flush 1/2” suit TW3,4 6.50
23-62F Gas Nozzle Screw On 5/8” Flush 6.50
23-50 Gas Nozzle Screw On 1/2” suit TW3,4 5.50
23-62 Gas Nozzle Screw On 5/8” suit TW3,4 5.50
23-75 Gas Nozzle Screw On 3/4” suit TW3,4 5.50
Nozzles available in packs of 5.
38 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
TWECO, cont.
ITEM# DESCRIPTION PRICE
24A-50SS Gas Nozzle Short Stop 1/2” suit 1.95
24A-62SS Gas Nozzle Short Stop Alum 5/8” suit TW4 1.95
24A-75SS Gas Nozzle Short Stop Alum 3/4” suit TW4 1.95
24A-50 Gas Nozzle Std Duty 1/2” Suit TW4 1.95
24A-62 Gas Nozzle Std Duty 5/8” Suit TW4 1.95
24A-75 Gas Nozzle Std Duty Alum 3/4” Suit TW4 1.95
24AH-50 Gas Nozzle Hvy Duty Alum 1/2” suit TW4 3.70
24AH-62 Gas Nozzle Hvy Duty Alum 5/8” suit TW4 3.70
24AH-75 Gas Nozzle Hvy Duty Alum 3/4” suit TW4 3.70
24CT-37S Gas Nozzle Fixed 3/8” TW 2,3,4 3.00
24CT-50S Gas Nozzle Fixed 1/2” TW4 3.00
24CT-62S Gas Nozzle Fixed 5/8” TW4 3.00
24CT-75S Gas Nozzle Fixed 3/4” TW4 3.00
25CT-50 Gas Nozzle Fixed 1/2” suit TW5 3.30
25CT-62 Gas Nozzle Fixed 5/8” suit TW5 3.30
25CT-75 Gas Nozzle Fixed 3/4” suit TW5 3.30
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 39
MIG, INSULATORS & DIFFUSERS
ITEM# DESCRIPTION PRICE
4323R Cap Rubber suit BE 200, 300 2.20
4423R Cap Rubber suit BE400, 500 2.20
4235 Head for Long Tips BE 200,300 (5/pkg) 3.70
4335 Head for Short Tips BE200, 300 (5/pkg) 3.70
4435 Head for Short Tips BE400, 500 (5/pkg) 3.70
4635 Head for Long Tips BE 400,500 (5/pkg) 3.70
32 Insulator suit TW2 1.00
34A Insulator suit TW4 1.00
34CT Insulator Course Thread suit TW4 6.35
35CT Insulator Course Thread suit TW5 7.35
52 Gas Diffuser Std suit TW2 2.50
52FN Gas Diffuser Fixed Nozzle suit TW2 2.15
54A Gas Diffuser Std TW3,4 1.00
55 Gas Diffuser Std suit TW5
MIG, GUN LINERS
43010 Liner Assy .023-.030” 10’ suit BE200, 300 9.75
43015 Liner Assy .023-.030” 15’ suit BE200, 300 9.75
43115 Liner Assy .035-.045” 15’ suit BE200, 300 9.75
43215 Liner Assy .045-.062” 15’ suit BE200, 300 9.75
44115 Liner Assy .035-.045” 15’ suit BE400, 500 9.75
42-23-15 Conduit Assy .023” 15’ suit TW2 9.50
42-3035-15 Conduit Assy .030-.035” 15’ suit TW2 9.50
42-4045-15 Conduit Assy .040-.045” 15’ suit TW2 9.50
42-4045-25 Conduit Assy .040-.045” 25’ suit TW2 13.00
44-3545-15 Conduit Assy .035-.045” 15’ suit TW4 10.00
44-3545-25 Conduit Assy .035-.045” 15’ suit TW4 13.00
44N-3545-15 Conduit Assy Nylon.035-.045” 15’ suit TW4 13.50
44-116-15 Conduit Assy 1/16” 15’ suit TW4 9.50
44-116-25 Conduit Assy 1/16” 25’ suit TW4 13.50
All available in packs of 5.
40 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
MIG, WELDING WIRES
STEEL Mild & Low Alloy Steel
1170S6023 ER70S-6 .023-025 11 lb spool 23.95/spool
1170S6030 mig wire 70s-6 0.030 11 lb spool price per lb 1.77 lb
1170S6035 ER70S6 Mig Wire 11 lb Spool .035 1.98 lb
3370S6030 70S6-030 Mig Wire, 33 lbs Spool 1.85 lb
4470S6035 70S-6 .035x44 lb spool price per pound 1.41 lb
4470S6045 70S-6 .045x 44 lb spool price per/lb 1.48 lb
STAINLESS STEEL
Item # .030 .035 .045 1/16
ER308 5.95 5.55 5.35 5.35
ER308L 5.95 5.55 5.35 5.35
ER309 8.15 7.75 7.55 7.55
ER309L 8.15 7.75 7.55 7.55
ER310 14.55 14.15 13.95 13.95
ER312 12.00 11.55 11.35 11.35
ER316 9.00 8.55 8.35 8.35
ER316L 9.20 8.75 8.55 8.55
ER317L 12.20 11.75 11.55 11.55
All Pricing is per pound.
All Pricing is per pound.
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 41
MIG, WELDING WIRES, CONT.
FLUX CORED SS
FLUX CORED
MILD STEEL
ALUMINUM
Item # .035 .045 1/16
E308LT1-1/4 13.15 12.95 12.95
E309LT1-1/4 14.55 14.35 14.35
E316LT1-1/4 15.75 15.55 15.55
E317LT1-1/4 14.15 13.95 13.95
Item # .045 .052 1/16
3371T1 2.15 1.88 1.89
Item # .030 .035 1/16
ER4043-4 6.15 5.75 5.35
ER5356-4 7.75 7.35 6.95
42 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
PLASMA
HYPERTHERM
RETAINING CAPS
& SHIELDS
ITEM PRICE
020034 30.00
020043 50.00
020087 80.00
020104 12.00
020200 13.00
020930 120483 40.00
120600 22.90
120601 15.95
120827 17.95
120828 17.95
120925 10.55
120928 41.95
120929 18.35
120930 19.35
120977 23.95
220048 43.95
NOZZLES
ITEM PRICE
020035 11.75
020036 11.75
020037 11.75
020047 15.15
020084 14.35
020089 14.35
020115 1.80
020131 1.80
020197 1.80
020219 1.80
020335 14.55
020337 2.35
020340 3.35
020350 2.15
020381 1.75
020395 2.15
020466 2.15
020539 4.75
020605 5.55
120616 5.55
120023 2.35
120272 17.55
120281 4.55
120282 2.35
120304 2.55
120305 2.55
120476 5.15
120504 2.00
120515 12.35
120518 10.00
120577 2.35
120578 2.35
120606 3.15
120607 4.55
120826 3.15
120927 8.75
120929 18.35
120931 9.15
SWIRL
RINGS ITEM PRICE
020039 13.55
020040 13.55
020042 11.55
020048 14.75
020079 12.55
020101 8.95
020239 9.55
020361 9.55
020706 15.95
025028 .55
120303 5.35
120474 10.15
120576 16.15
120925 10.55
220051 14.15
ELECTRODES
020038 10.55
020082 14.35
020103 2.75
020167 6.15
020191 3.75
020193 5.75
020220 3.55
020285 11.75
020382 3.35
020414 12.95
020415 12.95
020467 46.95
120470 27.95
120473 5.75
120573 5.55
120574 5.55
120667 10.55
120926 5.55
120930 19.35
220037 5.95
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 43
PLASMA CONT.
ESAB
SHIELD CUPS
ITEM PRICE
19124 5.95
20747 11.55
21326 16.95
21447 20.35
33419 13.35
21616 16.35
TIPS
18820 4.15
19914 2.75
19916 2.75
19917 2.75
20426 4.35
20860 3.15
20861 3.35
21008 3.35
21328 4.15
ELECTRODES
18205 7.35
20862 5.95
33366 6.95
21150 5.75
19918 5.35
21595 7.55
THERMAL
DYNAMICS
SHIELD CUPS ITEM PRICE 84088 4.95
85526 5.15
87500 28.15
87507 32.95
87575 15.75
95500 4.95
95617 3.55
95630 3.75
95694 8.15
95712 9.35
95750 25.75
95774 25.15
95779 19.15
95780 19.15
95790 42.15
96003 18.15
96004 27.75
96016 23.55
98218 41.15
98237 65.35
98236 25.15
98239 25.15
98243 14.95
98241 29.95
98402 11.55
ELECTRODES
84259 3.75
87502 5.95
95503 7.95
95582 5.55
95619 5.55
95633 2.95
95711 5.95
95749 6.55
95754 17.75
95760 6.95
95898 5.75
96006 5.15
96078 10.55
96506 3.55
96542 10.75
98215 13.15
98402 11.55
98407 10.15
THERMAL
DYNAMICS, CONT.
TIPS
ITEM PRICE 84173 2.95
87503 3.75
87504 3.75
87505 3.75
87506 3.75
95501 2.15
95581 2.95
95618 2.35
95631 1.95
95702 2.15
95707 2.35
95708 2.35
95709 2.35
95746 4.95
95747 4.95
95748 4.95
95782 2.15
95897 3.15
96000 2.95
96001 2.95
96002 2.95
96056 7.35
96099 2.95
96120 2.95
96500 2.95
96501 2.95
97726 4.15
97728 4.15
98207 9.15
98208 7.95
98210 9.15
98208 7.95
98210 9.15
98211 8.95
98212 9.15
98227 10.15
GAS DISTRIBUTORS
83218 2.55
87508 12.95
95502 12.95
96007 4.35
96081 27.55
96507 11.55
44 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
GROUND CLAMPS
GLC200 200amp Lenco Style Copper Ground Clamp $11.00
GLC300 300amp Lenco Style Copper Ground Clamp $19.00
GCW200 200amp Lenco Style Steel Ground Clamp $4.00
GCW300 300amp Lenco Style Steel Ground Clamp $5.00
GCW200 200amp Tweco Style Copper Ground Clamp $4.00
GCW300 300amp Tweco Style Copper Ground Clamp $4.50
ELECTRODE HOLDERS
EHRAF200 Lenco Style RAF Series 200 amp Holder $10.00
EHRAF250 Lenco Style RAF Series 250 amp Holder $12.00
EHRAF300 Lenco Style RAF Series 300 amp Holder $17.00
EHRAF350 Lenco Style RAF Series 350 amp Holder $18.50
EHT200 Tweco Style T Series 200 amp Holder $11.50
EHT250 Tweco Style T Series 250 amp Holder $11.75
EHT300 Tweco Style T Series 300 amp Holder $14.00
EHT350 Tweco Style T Series 350 amp Holder $17.75
CABLE, CONNECTORS & LUGS
CRTP1 Tweco Style 1-MPC Male/Female $7.00
CRTP2 Tweco Style 2-MPC Male/Female $9.00
CRTP4 Tweco Style 4-MPC Male/Female $11.00
CLH1020BP Hammer On Cable Lug Fits cable 1/0-2/0 $4.01
CL1020BP Solder On Cable Lug Fits cable 1/0-2/0 $3.00
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 45
WELDING ELECTRODES
NICKEL ALLOYS
STAINLESS STEEL
MILD & ALLOY STEEL
ALUMINUM
Item # 3/32 1/8 5/32 3/16
NA 190 21.95 21.75 21.75 21.75
NA A 21.75 21.55 21.55 21.55
NA 182 21.35 21.15 21.15 21.15
NA 112 27.15 26.95 26.95 26.95
HAS C276 29.55 29.35 29.35 29.35
NI 55 13.55 13.35 13.35 13.35
NI 99 20.35 20.15 20.15 20.15
Item # 3/32 1/8 5/32 3/16
E308-16 5.75 5.55 5.55 5.55
E308L-16 5.95 5.75 5.75 5.75
E309-16 6.95 6.75 6.75 6.75
E310-16 7.95 7.75 7.75 7.75
E312-16 5.95 5.75 5.75 5.75
E316-16 9.55 9.35 9.35 9.35
E316L-16 8.35 8.15 8.15 8.15
E317L-16 9.55 9.35 9.35 9.35
Item # 3/32 1/8 5/32 3/16
6010 2.35 2.15 2.15 2.15
6011 2.35 2.15 2.15 2.15
6013 2.15 1.95 1.95 1.95
6022 2.15 1.95 1.95 1.95
7010-A1 2.55 2.35 2.35 2.35
7014 2.15 1.95 1.95 1.95
7018 2.27 1.99 1.95 1.95
7024 2.35 2.15 2.15 2.15
8018-B2 2.95 2.75 2.75 2.75
9018-B3 3.35 3.15 3.15 3.15
Item # 3/32 1/8 5/32 3/16
A-3 11.75 11.55 11.55 11.55
46 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
CARBON ARC GOUGING
AEC 4000-1 Profax 4000-1 gouging torch $135.00
K3 600 Amp Torch w/7’ swivel cable $125.00
CH1812 1/8x12” Copperclad Pointed Electrode 100/box .17
CH53212 5/32 x 12” Copperclad Pointed Electrode 100/box .20
CH31612 3/16x12” Copperclad Pointed Electrode 50/box .21
CH1412 1/4x12” Copperclad Pointed Electrode 50/box .22
CH51612 5/16x12” Copperclad Pointed Electrode 50/box .30
CH3812 3/8x12” Copperclad Pointed Electrode 50/box .35
CH1212 1/2x12” Copperclad Pointed Electrode 50/box .70
Torches and Electrodes
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 47
Processes: GMAW, SMAW, GTAW, FCAW, & PLASMA ARC WELDING/CUTTING
Viewing Area: 98x44 mm (3.86” x 1.73”)
Standards: EN, DIN, ISO9001-200, ANSI Z87.12003, & CAN/ CSA Z94.3
ITEM DESCRIPTION PRICE
WHADF600SBLK Black 91.00
WHADF600SBLUE Blue 94.00
WHADF600SRED Red 94.00
WHADF600SSIL Silver 94.00
We carry a full line of Jackson, Huntsman, Optrel and Pearson. Please call for
more information.
ITEM DESCRIPTION PRICE
WHADF700SBLKFL Black Flame, GMAW,SMAW,GTAW,FCAW 121.00
WHADF700SREDFL Red Flame, GMAW,SMAW,GTAW,FCAW 121.00
WHADF700SUSFLG Blue w/USA Flag GMAW,SMAW,GTAW,FCAW 121.00
Auto Darkening Filter ADF – 600S & 700S Lightweight High Impact Resistant Black Shell
48 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
2x4” Flip
ITEM PRICE
WHO32L 2x4.25” Flip Front Helmet w/shade 11 lens $22.00
4x5” Fixed
ITEM PRICE
WHO35FIXED 4.5x5.25” Fixed Front Helmet w/ shade 10 lens $20.00
4x5” Lift
ITEM PRICE
WHO35L 4.5x5.25” Flip Front Helmet w/shade 10 lens $25.00
PARTS
WHH71A Headgear for Inweld 2x4 & 4x5 Helmets w/sweatband $7.00
WHADF600SHG Headgear for Inweld ADF300S &600S w/sweatband $7.00
Helmets-Welding
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 49
Auto Darkening Filter Replacements lenses
S-240-10 Arc One 2x4 shade 10 auto lens $82.00
S-240-11 Arc One 2x4 shade 11 auto lens $110.00
S-240-12 Arc One 2x4 shade 12 auto lens $110.00
X540V-1500 Arc One 4x5 auto lens for vision helmet $185.00
LENSES
We have a full line of welding lenses and hoods.
Lenses-Clear 2 x 4.25”
L2CG Glass 2x4.25” .50
L2CG20 Glass 2x4.25” x 2.0 mm .50
L2CG27 Glass 2x4.25” x 2.7mm .50
L2CLCR39 CR39 2x4.25” .60
L2CLP040 Poly 2x4.25” x0.040 .60
L2CLP060 Poly 2x4.25” x 0.060 .60
4.5 x 5.25”
L4CG Glass 4.5 x 5.25” .60
L4CLCR39 CR39 4.5x 5.25 1.40
L4CLP040 Poly 4.5x5.25 x 0.040 .90
L4CLP060 Poly 4.5x5.25 x 0.060 .90
50 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
WE CARRY A FULL LINE OF JACKSON, HUNTSMAN, AND MSA
BRANDS. PLEASE CALL FOR MORE INFORMATION.
ITEM# DESCRIPTION PRICE
301LOG-(color) 4 pt. Pinlock Suspension $6.50
302LOG-(color) 4 pt. Ratchet Suspension $9.00
Jackson Blockhead™ Hard Hats
20699KC2 LOG-(color) 8 pt. Ratchet suspension $13.95
Jackson Sentry III™ Hard Hats
14409KC2 LOG-(color) 6 pt. Ratchet Suspension $14.55
LINERS
16867EG 3-Layer Extreme Series 100% Poly Fleece Lining (6/case) $34.70
16850EG 2-Layer Series 100% Poly Fleece Lining (6/case) $27.00
300442JS Blue Quilted Nylon Shell, 3-Layers of thick foam ea $ 2.20
3000439JS Heavy Knit Spun Polyester Heavyweight Fleece Lining ea. $ 7.60
Available in Black, Blue, Lime, Orange, Red, Yellow & White. 4 pt. ratchet or pinlock suspensions. Meets ANSI Z89.1 Type 1, Class E Standards
Available in Blue, Green, Orange, Hi-Vis Orange, Red, Yellow & White. 8 pt. Ratchet suspension. Meets ANSI Z89.1 Type 1, Class E Standards.
Available in Blue, Green, Orange, Hi-Vis Orange, Red, Yellow & White. 6 pt. Ratchet suspension. Meets ANSI Z89.1 Type 1, Class E Standards. Lightweight, molded from High
Density Polyethylene (HDPE)- only weighs 12.5 oz.
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 51
SAFETY GLASSES Prices based on lens and frame colors. We have many colors to choose from. Please call for more
information.
Part # Product/Description Price From:
NEMESIS EYEWEAR Nemesis™Safety Eyewear $2.41 - 5.12
SW MAGNUM 3G
EYEWE R Smith & Wesson® Magnum 3G™ Safety Eyewear $4.03 - $8.26
HELLRAISER EYE HellRaiser™ Safety Eyewear $3.03 - $5.87
SW EYEWEAR Smith & Wesson® Elite™ Safety Eyewear $4.20 - $4.82
ELEMENT EYEWEAR Element™ Safety Eyewear $0.92 - $1.46
OTG EYEWEAR OTG™ (Over The Glass) Safety Eyewear $3.58
301170JS Smith & Wesson® Viewmaster™ Safety Eyewear $28.67
NEMEIS VL EYEWEAR Nemesis VL™ Safety Eyewear 3.20 - $6.03
SW EQUALIZER
EYEWEAR Smith & Wesson® Equalizer™ Safety Eyewear $3.65 - $.70
NEMESIS RX EYEWEAR Nemesis RX™ Safety Eyewear $5.76
EXPO EYEWEAR Expo™ Safety Eyewear $0.78
UNISPEC EYEWEAR Unispec II™ Safety Eyewear $.50 -$3.70
52 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
Prices based on lens and frame colors. Many colors to choose from. Please call for more information.
Part # Product/Description Price From:
BEARKAT Bearkat® Safety Glasses $1.37- $1.97
KLONDIKE
BLACK Klondike® Eyewear with Black Frame $2.98 - $3.60
CHECKLITE Checklite® Safety Glasses $1.15 - $2.15
STORM
BLACK Storm® Safety Glasses with Black Frame $3.75 - $4.85
STRATOS
BLACK Stratos® Eyewear with Black Frame $0.85 - $1.68
CK2 SMOKE CK2® Eyewear with Smoke Temple/Clear Nosepiece $2.08 - $3.74
CHECKMATE Checkmate® Safety Glasses $1.35 - $2.85
TOMAHAWK
BLACK Tomahawk® Eyewear with Black Frame $1.62 - $3.29
TOMAHAWK
USA Tomahawk® Eyewear with Red/White/Blue Frame $1.92 - $2.80
CK2 CK2® Eyewear, Smoke Temple w/Yellow Accents $2.08- $3.75
99940C Excalibur® Safety Glasses with Red Frame $2.25
DESPERADO
BLACK
Desperado™ Safety Glasses with Black Nylon Frame/Clear
Nosepiece $3.50 - $5.45
YUKON XL Yukon® XL Eyewear $1.50 - $2.66
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 53
EYE SAFETY
ITEM# DESCRIPTION PRICE
320004 LOG Eye Wash Station, Dual 16 oz Bottles $40.55
45416BYLOG Green on White lettering holds two 32oz. bottles $60.00
H703FLOG 1/2 oz. bottles 12/box $32.50
7501LFA Portable gravity operated. 9 gal. capacity. $214.00
EYE GLASS CORDS
210C Crews Economy Black, 24” . 79
214C Breakaway Black 1.95
GOGGLES
2220C Perforated Rubber Strap, Clear Lens 1.70
2230RC Chemical Splash Goggle w/Indirect Vent 2.25
2310 AFC LOG RX 1000 Goggles w/Clear Anti-Fog Lens 6.04
28550C Crews Welding Goggle Green Lens 6.11
VISORS
ITEM# DESCRIPTION PRICE
10017934MSA Polycarbonate Visor, Clear (Flat) 8" x 15.5" x .040" 3.75
10109109MSA Propionate, Dark Green Basic Z87.1 8”x15.5”x.060 4.18
181640C LOG 8x15 ½ clear face shield .040 thickness 1.98
HEAD GEAR
BG1 ARC Ratchet headgear for face shield comes with clear shield 9.99
54 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
GLOVES
WORK the following gloves come in sizes S-XL special sizing available call for pricing
ITEM# DESCRIPTION PRICE/DOZEN
528 Economy Shoulder-split leather palm 2 1/2" starched safety cuff $18.00dz
558 Select Shoulder, Economy Leather, 2 1/2" Plasticized Cuff LG 20.38dz
450DP Double Leather Palm, 2 1/2" Safety Cuff L-2XL DZ 21.60dz
5558P Fleece Lined Leather Palm Glove 3.87 pr
DRIVERS
993K-size Split Leather Cow driver, Straight Thumb sizes L-XL 5.40 pr
999KT 100 gram 3M Thinsulate lining 8.50 pr
WELDING
9041-size Premium select side leather Kevlar sewn wing thumb 6.00 pr
MIG & TIG WELDING
6010 Mig Glove, 4" cuff L-XL 8.67pr
6140-size Premium Kidskin Tig glove Kevlar® sewn 2” cuff 9.00pr
INSULATED
1555 Pigskin, Thinsulate® Lined Gloves w/Knit Wrist Lg. only 6.19pr
HV05555 Hi-Vis Premium Grain Pigskin w/3M scotch brite fabric Insulated 8.58pr
Industry Applications: Welding and heat applications, plus all general purpose applications requiring heat, flame
or spark protection. Many more styles to choose from. Please call for more information.
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 55
STRING & COATED
ITEM# DESCRIPTION PRICE/DOZEN
K710SBW Cotton String Knit, natural Large 7 gauge 7.60 dz
K708SKHW String Knits w/PVC dots. Abrasion Resistance 9.95 dz
DISPOSABLE/EXAM GLOVES
2905-size 3 mil Powder free textured gloves 100/bx 6.80
2550-size 14 mil Powder free Latex gloves 50/box high risk EMT grade 12.99
EARMUFFS
1010421HW LOG Mach™ 1 Earmuffs 9.20
1011602SN 25NRR Cap-Mounted T2H Noise Blocking Earmuff 13.63
FOAM PLUGS
MAX1SN Uncorded NRR29 (200/box) 26.55
MAX30SN Corded NRR24 Conic-Fit (100/box) 24.38
QB2HYG® Banded ear plugs for environments that have intermittent noise.
NRR 25 4.34 ea
This is a partial listing of earmuffs. We offer a full line to suit your needs. Please call us for more options.
56 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
RESPIRATORS
ITEM# DESCRIPTION PRICE
14110388 SAF-T-FIT® Plus Disposable Particulate Med/Lg. 20/box $15.95
14110444HW N95 Non-Valved (Style #NBW95) 20/box $11.00
1740GN N95 Respirator w/o Exhalation Valve Adjustable metal nose band $12.00
10/box
RESPIRATOR CARTRIDGES
Full line of cartridges available. Please call us for more information.
SIGNS
We supply all custom made safety and warning signs. Call for more information.
Definitions:
N95 Particulate Filter (95% filter efficiency level) – Effective against particulate aerosols free of oil; time use
restrictions may apply.
R95 Particulate Filter (95% filter efficiency level)- Effective against all particulate aerosols; time use restrictions
may apply.
P100 Particulate Filter (99.97% filter efficiency level)- Effective against all particulate aerosols.
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 57
FIRE AND DETECTION
466142K Kidde 2 1/2 lb ABC Disposable Extinguisher w/Nylon Strap Bracket $26.00
466425K Kidde 5 lb ABC Extinguisher FC340M-VB w/Steel Bracket & Strap $48.00
466204K Kidde 10 lb ABC Pro Line MP Extinguisher w/Wall Hook $57.00
21007867B Badger® Advantage® 10 lb ABC Extinguisher w/Wall Hook $79.00
466206K Kidde 20 lb ABC Pro Line MP Extinguisher w/Wall Hook $106.43
DETECTION FIRE AND CARBON MONOXIDE
0914E Micro Ionization Smoke Alarm (DC) $8.81
I4618 i4618 AC/DC Ionization Wire-In Smoke Alarm w/Battery Backup $21.61
21006406LEG CO Alarm, AC Wire-In w/Battery Backup $38.36
HD135F Heat Detector with Thermal Sensor (AC/DC) $29.92
47173BY "FIRE EXTINGUISHER" sign 8"H x 8 1/2"W x 3 1/4"D $19.48
FXWMANMC “FIRE EXTINGUISHER" Arrow Aluminum Sign $10.75
58 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
FIRST AID
223GF 25-Person, 106-Piece Kit w/Gasket (Plastic) $26.50
225ANF 50-Person, 195-Piece Kit w/Dividers (Plastic) $55.00
CLOTHING
V200RRC 3/4" Lime Prismatic Mesh Fabric $4.50
V201RC General Purpose Orange Safety Vest no stripes $4.50
V201RRC Class 2 Luminator, Poly Orange Safety Vest w/Silver Stripes $12.48
39030(size) Green welding jacket 30” Snap sleeves and front (Med-XL) $25.21
38100 Red-Ram Leather Cape with Snap Bib (XL-2XL) $50.00
39120 Fire Retardant Fabric Welding Bib for Cape $22.00
RAIN GEAR
2403LRC Classic .35mm PVC/Poly, 49" Yellow Raincoat w/Attached Hood Lg. $10.50
RW353 Choice 3 Piece PVC/Polyester Rain-suit sizes Med-4XL $8.01
BYR10011RC Rubber Slush Boot 17” Yellow, Sizes 10-16 $23.50
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 59
FALL PROTECTION
ULTRA-SAFE
96305N Economy Full Body Harness single D-ring center back only. Sm-XLg. $38.00
96307 Full Body Harness, retrieval type. D-ring center back and on each shoulder. $58.00
96305 Full Body Harness, 3 point positioning type. D-ring ctr.back & on each hip. $55.00
96396 Full Body harness, Iron worker type $89.00
LANYARDS
US96502 Nylon web lanyard with double locking snaps on each end. $33.00
US96406 1/2” x 6’ Nylon rope lanyard $40.00
US97514 4’ Shock Lanyard $43.00
US96516 1/2”x 6 shock absorbing lanyard $50.00
FALL PROTECTION HARDWARE
ITEM# DESCRIPTION PRICE
96594 Small Carabiner $25.00
96598 Large Carabiner $31.00
96596 Small rebar hook $23.50
96597 Large rebar hook $30.00
The fall restraint and fall arrest products below meet or exceed ANSI Z359.1 and OSHA regulations.
60 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
ULTRA-SAFE
9659all
RETRACTABLE LANYARDS
Web Retractables, w/ swivel tops, Aluminum Carabiners and Aluminum Hooks.
ITEM# DESCRIPTION PRICE
US-HPS8 1” webbing, Length-8’ Retractable w/swivel top and carabiner $140.00
US-HPS30 1” webbing, Length-30’ Retractable w/swivel top and carabiner $400.00
US-HPS40 1” webbing, Length-40’ Retractable w/swivel top and carabiner $465.00
Cable Retractables w/swivel tops, Carabiners and Steel Load Indicator Hooks.
US-HN10 3/16”cable, Length-10’ $155.00
US-HN15 3/16”cable, Length-15’ $265.00
US-HN20 3/16”cable, Length-20’ $431.00
US-HN30 3/16”cable, Length-30’ $481.00
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 61
Tape
ITEM# DESCRIPTION PRICE EA. ROLL
M183 Industrial Grade Masking Tape 1”x60’ 36/case $1.80
M801 ¾”x60’ General Purpose Electrical Tape $1.59
GP2280 General Purpose DUCT tape 2”x60’ 24/cs $4.66
M234 Barricade Tape, Danger 3”x1000’ 8/cs $8.23
M224 Barricade Tape, Caution 3”x1000’ 12/cs Yellow $8.23
Batteries
ENE EN91 AA Energizer Batteries 24/pk $14.64
ENE EN92 AAA Energizer Batteries 24/pk $15.50 ENE EN95 D Energizer batteries 1 doz. $18.00
Lighting
E250YEN Economy Industrial 2D Flashlight $4.50
1151EN Energizer® Industrial® 2AA Heavy-Duty Flashlight $5.00
500QTZ 500 watt Quartz with Floor Stand. $40.00
500QTZSTD 500 watt Quartz with tripod Stand $55.00
62 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
ATA PNEUMATIC POWER TOOLS
Power Tools
ITEM# DESCRIPTION PRICE
GAL-1340A Extended Right Angle Wheel Grinder 13,500 RPM Call for pricing
GAL-1340A-C Extended Right Angle Collet Grinder 13,500 RPM
G-1340A ¼” Lightweight Aluminum Body Die Grinder 25,000 RPM
GE-1340A-C 1/4” Extended heavy-duty Die Grinder 25,000 RPM
PAS-361 Air Marking Pen writes on materials up to RC-64
SV27LR Anti-Vibration Die Grinder 1.00Hp 25000RMP 6mm Collet
SDX37LR Extended Body Straight Grinder 37,000RPM 6mm Collet
RA20LR Small Right Angle Die Grinder 20,000 RPM
RA14-125RA4 Right Angle Grinder 12,000RPM 125mm Disc Type 27, 41, 42
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 63
Chain Hoists
VCH12x10 ½ ton x 10’ Chain Hoist $135.00
VCH12x15 ½ ton x 15’ Chain Hoist $150.00
VCH12x20 ½ ton x 20’ Chain Hoist $198.00
VCH1x10 1 ton x 10’ Chain Hoist $155.00
VCH1x15 1 ton x 15’ Chain Hoist $186.00
VCH1x20 1 ton x 20’ Chain Hoist $209.00
VCH112x10 1-1/2 ton x10’ Chain Hoist $200.00
VCH112x15 1-1/2 ton x 15’ Chain Hoist $225.00
VCH112x20 1-1/2 ton x 20’ Chain Hoist $259.00
VCH2x10 2 Ton x 10’ Chain Hoist $248.00
VCH2x15 2 Ton x 15’ Chain Hoist $276.00
VCH2x20 2 Ton x 20’ Chain Hoist $311.00
VCH3x10 3 Ton x 10’ Chain Hoist $346.00
VCH3x15 3 Ton x 15’ Chain Hoist $398.00
VCH3x20 3 Ton x 20’ Chain Hoist $453.00
Lever Hoists
VLH12x5 ½ Ton x 5’ Lever Hoist $137.00
VLH12x10 ½ Ton x 10’ Lever Hoist $149.00
VLH34x5 ¾ Ton x 5’ Lever Hoist $198.00
VLH34x10 ¾ Ton x 10’ Lever Hoist $212.00
VLH34x15 ¾ Ton x 15’ Lever Hoist $223.00
VLH34x20 ¾ Ton x 20’ Lever Hoist $240.00
VLH112x5 1-1/2 Ton x 5’ Lever Hoist $252.00
VLH112x10 1-1/2 Ton x 10’ Lever Hoist $268.00
VLX112x15 1-1/2 Ton x 15’ Lever Hoist $291.00
VLH112x20 1-1/2 Ton x 20’ Lever Hoist $311.00
VLH3x5 3 Ton x 5’ Lever Hoist $385.00
VLH3x10 3 Ton x 10’ Lever Hoist $430.00
VLH3x15 3 Ton x 15’ Lever Hoist $450.00
VLH3x20 3 Ton x 20’ Lever Hoist $475.00
Push Trolley
VPT1 1 Ton Trolley $100.00
VPT2 2 Ton Trolley $165.00
VPT3 3 Ton Trolley $360.00
Manual Chain Hoists are available to 20 ton rating. Auto Brake, Bolt on Latches, Heat Treated Hooks.
64 TEL: 207-487-3681 EMAIL:CMP@MIDMAINE.COM FAX: 207-487-3684
Beam Clamp VBC1 1 Ton Adjustable Clamp $75.00
VBC2 2 Ton Adjustable Clamp $80.00
VBC3 3 Ton Adjustable Clamp $129.00
Levels
330-24 24” Polycast Level $5.75
540-24 24” Aluminum Level $10.40
EM81.24 24” Heavy Duty Magnetic Aluminum I-Beam $18.50
540-48 48” Aluminum Level $16.00
EM81.48 48” Heavy Duty Magnetic Aluminum I-Beam $33.00
Squares
EM0100 8”x12” Steel carpenter Square $4.50
1794469 12” Combination Square $8.90
Tape Measures
6926 25’x1” Yellow Case with Slide Lock $5.25
6936 30’x1” Yellow Case with Slide Lock $6.50
7536 35”x1” Yellow Case with Slide Lock $8.00
6100 100’x ½” ABS Closed Case Tape-Fiberglass Blade $18.00
CMP & SUPPLY CO.
TEL: 207-487-3681 EMAIL: CMP@MIDMAINE.COM FAX: 207-487-3684 65
Let our experience and service work for you.
Tel: 207-487-3681 Fax: 207-487-3684
Website: www.cmpandsupply.com
top related