cogito classic tutorial (android)
Post on 13-May-2015
572 Views
Preview:
DESCRIPTION
TRANSCRIPT
Tutorial for Android users *with the CONNECTED WATCH App
TABLE OF CONTENTS
1. HOW TO USE THE WATCH
2. HOW TO PAIR THE WATCH TO YOUR DEVICE
1. STEP 1: PREPARE YOUR WATCH FOR PAIRING
2. STEP 2: DOWNLOAD THE CONNECTED APP TO YOUR ANDROID DEVICE
3. STEP 3: PREPARE YOUR DEVICE BY ENABLING BLUETOOTH
4. STEP 4: PAIR YOUR DEVICE UNDER ANDROID BLUETOOTH SETTINGS
3. REGISTRATION
4. SETUP NOTIFICATION
5. WATCH DEMO
Pairing
When the watch is OFF, press POWER & COMMAND buttons until 1st beep (approx. 3sec) and all icons will blink every 2 sec.
Reset the watch
Press PAGE LEFT or PAGE RIGHT to view additional information or back to the time mode
Back Light
Tap once the POWER button
Digital Display
Digital display supports Latin characters only
COMMAND
PAGE RIGHT PAGE LEFT
SET TIME
pull 1/2 way and turn to set the time
Icon, vibrate with optional beeps
POWER
Power on/off > 3 sec
NOTIFICATIONS DISPLAY
First turn off the watch by Pressing the POWER button for 3 sec. Press and hold the 4 buttons together until you see the ALERT icon . Then the watch will turn off.
NOTIFICATIONS
Incoming Call, Missed Call notification:
Caller ID will be displayed during
incoming calls. Call numbers will be
Displayed if it has not been stored
as contact in your phone book.
*Caller ID supports Latin characters only.
Call notification
Caller ID
Text and Social Media alerts:
Support SMS, MMS and social
media posts on Facebook and
message notification from
Skype, Line, WhatsApp, WeChat, Instagram and more..
NOTIFICATIONS
Message notification
Number of notification
number of
notification
Calendar & Reminder alerts:
Email alerts:
event
notification
subject of
Calendar event
notification
NOTIFICATIONS
Low and Critical battery alerts:
The CONNECTED display shows the battery percentage and the low and critical battery icons blinks respectively.
percentage of
phone battery
NOTIFICATIONS
low battery alert
To find the COGITO watch The watch beeps and blinks when tapping
The “find my watch” icon in the
Connected Watch App.
After tapping the out of range icon , the watch
beeps and blinks when your phone and watch are
apart from each other.
To activate out of range notification
NOTIFICATIONS
beep & vibration
To acknowledge the notification Press the COMMAND button or check the notification on your mobile phone or tablet.
To mute/unmute your watch When there have no notification, press the
COMMAND button for 5 sec to change the notification mode of the watch.
NOTIFICATIONS
COMMAND
press 5 sec to change notification mode
Vibration only
Beep and Vibration
Notification mode
Tap the Camera icon in the Connected Watch App. Press the
COMMAND button of the watch, you can trigger the camera interface of the app and take photos remotely.
Action : Remote take picture
COMMAND
press once to
trigger camera
Place your phone somewhere for selfie
Launch the camera mode on the Connected Watch App
COMMAND
Action : Remote control music
When using the music player on your phone, you can use the COMMAND button to control the music playback. Start the music player as you normally would on your Android Device. Once the music begins playing, you can use the COMMAND button to control playback.
• Play/Pause--short press the COMMAND button(press and release)
Press once to play or pause
When the default music player is active on your phone, the COMMAND button will assigned to
control the music playback
Pair the watch • Get started
Tap the Play Store icon on
your device to download the free
App.
Then, tap ‘Search’ and type
‘Connected Watch’.
Select and download the
Connected Watch App.
BEFORE PAIR : DOWNLOAD THE APP ONTO YOUR DEVICE
Set your watch into the pairing mode
When the watch is OFF, press COMMAND +
POWER buttons until 1st beep (3sec) and all icons will blink.
PAIRING THE WATCH WITH YOUR DEVICE
COMMAND POWER
When connected, the
connected icon will be displayed on the watch
Press both
button for
3 sec
Sign up or Log into your
CONNECTEDEVICE Account
(! Note : New Users, please check your
email account for sign up confirmation.)
REGISTER WITH CONNECTEDEVICE ACCOUNT
Fill in all fields below and don’t forget to tap the ‘I agree’ checkbox
below. Tap ‘Sign-up!”.
ENABLING BLUETOOTH ON YOUR DEVICE
Ensure that your Bluetooth is
switched ON.
After the registration process,
tap the
icon on the bottom left to
see your Device Radar You should see your COGITO
watch in your ‘Visible Devices’ List.
The text “Paired, Connected”
confirms successful pairing.
You can now use your watch to receive notifications!
CONFIRM DEVICE
PAIRING THE WATCH WITH YOUR DEVICE
Open the Connected App and then Search for COGITO Watch.
If Bluetooth is disabled you will be asked to enable it.
Launch your CONNECTED Watch App and tap Alerts, in
the above right hand corner.
The color GREEN within the circular
knobs indicates the
notifications you will
receive onto your watch.
If you wish to
turn off
certain notifications,
swipe the circular knob to your left.
SET UP NOTIFICATION ITEMS
IF YOU WANT TO SEE THE ACTION OF THE WATCH YOU CAN TRY THE DEMO
In your Connected Watch App home screen, tap the
icon on the bottom left to
see your Device Radar
Tap COGITO under your Visible Devices.
Then, tap ‘Demo Features’ in your
menu
Tap on the above icons to trigger
notifications to your watch.
An icon will then light up on your
watch face when you tap on each
demo function.
IF YOU WANT TO SEE THE ACTION OF THE WATCH YOU CAN TRY THE DEMO
If you discovered a problem or that you are not
receiving notifications, please feel free to open a
support ticket at support@connectedevice.com
Please include your mobile phone model, OS
version, app version, and any other details to help
with the investigation.
PROBLEMS?
Thank you !
top related