cummins holset specialists diagnosing oil leakages solution… · cummins e-tool in action, testing...
Post on 28-Feb-2021
11 Views
Preview:
TRANSCRIPT
Cummins Holset Specialists
Cummins Turbo Technologies Platinum Distributor 2017
Your New and Remanufactured Turbocharger SupplierServing Truck Dealers & Parts Distributors Nationwide
Locations in Pennsauken, NJ and Commerce City, CO
tsreman.com • 844-4A-TURBO (28-8726)
Offering Genuine Holset NEW and Factory RemanTurbo Chargers as Well as Turbo Solutions
Remanufactured Turbo Chargers.
Technology & TestingPictured to the left is a screen shot of our GenuineCummins E-Tool in action, testing VGT TurbochargerActuators.
This proprietary TooI not only allows us to test butgives us the ability to diagnose common failures.
Turbo Solutions Has Been Awarded Platinum Distributor 2017 By Cummins TurboTechnologies For A Year Of Excellent Customer Service Performance.
Turbo Solutions Specializes In Cummins Engine ApplicationsCummins Holset turbochargers are vertically integrated throughout the industry. Because Cummins Holset makesthe most technically advanced turbos in the world, not all remanufacturers can work on Cummins Holset Turboswith electronic actuators. Turbo Solutions’ technicians have the expertise and specialized tools to remanufacture
these and other Holset turbos to meet or exceed OEM specifications.
We Use OEMQuality PartsAnd Components
Over 400 UnitsIn Stock Ready To Ship!
HE351VE • #RHL3770973
4034315-VGT Electric Actuator(The Brain)
HE431VE • #RHH5350503 HE561VE • #RHH3767615
We Stock The Most Popular Models300 Series • 400 Series • 500 Series
ISB • ISM • ISL • ISC • ISX
CATA
LOG
NUM
BER
30
www.midwestwheel.com
Order NLINE™
www.midwestwheel.com
Order NLINE™
DIAGNOSING OIL LEAKAGES WITH TURBOCHARGERS
TECHTips
If you’ve ever had a turbocharger start leaking or smoking, you may have thought the turbocharger was faulty. This is a common misperception, but, most of the time it has nothing to do with the turbocharger functionality. More than
95 percent of the time, oil leakage is caused by a few issues:Oil drain line that is too small ∙ Oil drain line restricting oil ∙ Excessive blow-by
To determine if this is one of the reasons for the oil leakage, follow these steps:
CHECK THE SIZE OF THE OIL DRAIN LINE.It should be equal to or larger than the bearing housing oil drain—and, the larger the oil drain, the better (within reason).
CHECK TO SEE HOW THE OIL IS RETURNING BACK TO THE ENGINE.The oil drain line should be straight and downhill, with no level spots or upturns, to remain freeflowing with no restrictions. It’s important to avoid 90° bends, so the drain line can enter the oil pan above the static oil line and not in line with the throw of the crank.
CHECK TO SEE IF THE ENGINE HAS EXCESS CRANKCASE PRESSURE/BLOW-BY.If the engine has high mileage and is in need of rebuilding, this can cause excessive blow-by. This essentially creates a higher pressure or restriction in the oil drain and does not promote good oil flow, causing the oil to follow the least path of resistance.
If you follow these steps and determine it is not an improperly sized or restricted oil line, or excessive blow-by, then the leakage also may be due to excessive tilt of the turbocharger, a damaged bearing system, or worn or collapsed piston rings.
How A Bad DPF Filter Can Affect Your Turbocharger
MIDWESTWHEEL.COM
IOW
A
MIS
SO
UR
I
DES MOINES1436 E. Ovid Ave.
office 515.265.1491fax 515.265.4120
parts fax 800.314.4329parts 800.888.0248
CEDAR RAPIDS200 50th Ave. S.W.main 319.365.4453fax 319.365.6327
parts fax 877.706.6085parts 800.332.5435
DAVENPORT8502 Northwest Blvd.
main 563.322.2671fax 563.322.5940
parts 800.553.1886
SIOUX CITY1819 4th St.
main 712.252.7969fax 712.252.6149
parts 800.943.3534
CLEAR LAKE840 Hwy. 18 W.
main 641.357.7101fax 641.357.8190
parts fax 800.548.9674parts 800.397.5630
KANSAS CITY5801 E. Front St.
main 816.471.1552fax 816.471.0813
parts 800.821.7402TRUCK PARTS
SUPER STORETM
November 7, 2019 (30Turbo Solutions Tech Tips)
TURBOCHARGER TIPSFROM TURBO SOLUTIONS
DIESEL PARTICULATE FILTERS DPFFACT: A blocked DPF Filter prevents exhaust gas from passing through the exhaust system at the required rate. Increased exhaust gas temperature and back pressure can affect the Turbocharger in a number of ways.Exhaust gas leaks, oil leaks, oil carbonization and accelerated bearing wear can result from a bad or clogged DPF Filter.
ALL REMAN TURBOS INCLUDE
ACTUATORWHERE APPLICABLE
� Many Applications Same Day Availability � 100% Refundable Core Charge � Genuine Parts � Electronic Actuator 100% Calibrated � State of the Art Testing Equipment � Industry Trained/Technical Support � 1 Year/Unlimited Miles Warranty � 100% Customer Satisfaction
Other applications available - see your
salesman for details!
Caterpillar C12/15 ACERT-GTA Series
Cummins ISX - HE561VE Detroit Series 60 - GTA4508VCaterpillar C7 - S200/300 Cummins ISB - HE351VE
top related