dcs 416r | dcs 416r
Post on 29-Apr-2022
47 Views
Preview:
TRANSCRIPT
Dynacord | DCS 416R
DCS 416R
www.dynacord.com
▪ 8 analog inputs
▪ 0–10 V DC or a potentiometer can be connected toeach input
▪ Pluggable connection terminals for referencevoltage of 10 V
▪ 8 analog outputs 0–10 V DC
The module is fitted on the back of the DCS 400 rackplug-in board. The module is used to connect analogcontrol cables and potentiometers whose level is usedto control loudspeaker controllers or other continuousparameters. The control outputs also provide analogvoltages to control external devices with analoginputs.Additional properties:
• Pluggable connection terminals with screwed flangefor all inputs and outputs
• A maximum of 2 DCS 416R modules can be cascaded
Parts included
No. Component
1 DCS 416R
2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839)
Technical specifications
Operating voltage 24 V DC, -10%/+30%
Operating current (max.)
• Standby/Idle/Announcement/Alert
24 V, 72 mA, 1.73 W
Electromagnetical environment E1, E2, E3
Operating temperature -5 °C to 45 °C
Product dimensions (Width byHeight by Depth)
37.5 by 80.6 by 245 mm
Net weight 170 g
Inputs
• Voltage range (min.–max.)
0–10 V DC
• Impedance range ext.(min.–max.)
0–10 kΩ
• Maximum input voltage 50 V DC
Outputs
• Voltage range (min.–max.)
0–10 V DC
• Output impedance 47 Ω
• Maximum load 2 kΩ
Resolution of inputs/outputs 8 Bit
Reference voltage source
• Output voltage 10 V DC
• Maximum output current 30 mA
Input 10...10V
DATA ADC
CN
to B
ackp
lane
DC
DC
+24VCN
t +5VB+24VCN
EN ADC
-24VCN
B
A
CLK
DATA AD/DA
EN DAC
RES PCB SEL
DAT PCB SEL
EN PCB SEL
EN MONITOR
DC
DC
DC
DC
A
+18VA
+5VA
ADC
OU
TPU
T
C
N13
DATA ADC
+24VCN
EN ADC
-24VCN
CLK
DATA AD/DA
EN DAC
RES PCB SEL
DAT PCB SEL
EN PCB SEL
EN MONITOR
+24VCN
B
B+5VB
A+5VAB
DAC
A
+5VA +18VA
Input 80...10V
A
+5VA +18VA
A+5VA
A
Ident
A+5VA
Output 10...10V
A
+18VA
Output 80...10V
A
+18VA
DC
DC
A
+18VA
D Q
R
S
Q
D Q
R
S
Q
Boar
d se
lect
+24VA
Block diagram
2 | DCS 416R
Installation/configuration notes
Installation informationOn the DCS 400 rack plug-in board, slots 1–10 mustbe occupied in ascending sequence (left to right)without any gaps. Different module types canotherwise be arranged in any sequence.Exception: Slot 1 (far left) must always be occupiedwith a DCS 801R control module or DCS 405Rextension module.When assembling the device and installing theconnections, please comply with the standards VDE0100 and EN 60065.
ConnectorThe scope of delivery for the device includes two 15-pin connectors. Conductor cross-sections of 0.14 mm²(AWG26) to 1.5 mm² (AWG16) can be used.Recommended connecting cable: flexible CU strand,LiY, 0.75 mm².
Position of the bridges on the circuit board
Certifications and approvals
Status as of November 2012:
• EN 50130-4• EN 54-16• EN 55103-1• EN 55103-2
Ordering information
DCS 416ROrder number F.01U.121.790
3 | DCS 416R
Represented by:
Germany: EVI Audio GmbHSachsenring 6094315 StraubingGermany
www.dynacord.com
© Bosch Security Systems 2013 | Data subject to change without noticeDocument Number | Vs1 | 19. Mar 2013
top related