dennis fire appliances

Dennis Fire Appliances

Operations & use

PTO

Step 1

Move slide cover towards the drivers seat to lock out the

gearbox

Step 2

Select drive on the gear selector to

engage the pump drive

Step 3

Move the leaver back to engage the pump bay throttle control

Step 4

The warning light should now show

To disengage the PTO reverse the order

Water pump

Pump drain tapsFor winter draining to prevent

pump frost damage

Supply valve for High Pressure

hose reels

Shut off valve for NearsideHigh Pressure hose reel.Select ‘Foam’ or ‘Water’

(to be closed when not in use)

Main water tank to pump Shut off valve

Engine speed control.

Shut off valve for OffsideHigh Pressure hose reel.Select ‘Foam’ or ‘Water’

(to be closed when not in use)

Suction fill coupling

Please note filters must be used on open water.

Hydrant fill to water tank

Low pressure deliveries

Low pressure water

Open main water tank to pump Shut off valve

Open Low pressure

delivery valve as required

High pressure water

Open supply valve for High Pressure hose

reels

Shut off valve for Nearside

High Pressure hose reel.

Select ‘Foam’ or ‘Water’

Shut off valve for Offside

High Pressure hose reel.

Select‘Foam’ or ‘Water’

Open main water tank to pump Shut off

valve

Generator

Step 1

Move slide cover towards the drivers

seat

Step 2

Move the leaver back to engage the pump bay throttle control

Step 3

The warning light should now show

Step 4

Turn on the generator switch

Light mastThese controls are found in the passengers side front locker

DO NOT move the vehicle with the mast raised

Rotate the valve to ‘Raise’Press & hold the raise button until the light mast

is fully raised.Rotate the valve to ‘Lower’ to stow the mast

Raise the engine speed in the pump bay to maintain voltage

output