divided crane block quotation request overhead crane ... · overhead crane blocks from gunnebo...
Post on 11-May-2018
217 Views
Preview:
TRANSCRIPT
Quantity:
Crane Information:(a) CMAA rating: (b) Duty cycle: (c) Environment:
Block capacity (in tons) WLL
Weight required LBS
Design Factor (Min. 5 to 1) Yes Other
Wire rope diameter: Inches Millimeters
Sheave Information:(a) Number of sheaves: (b) Outside Diameter: (c) Sheave center line to center line Inner sheave Outer sheave .(d) Bearing type: Tapered Straight Bronze (e) Sheave shroud: Yes No (f) Sheave groove hardness: Rc 35
Block Length:
Hook Information: (a) Hook type: Single barbed Duplex Other (b) Hook throat opening, if critical (c) Type of latch (d) Material: Forged steel Cast steel (e) Mill duty: Yes No Hazardous duty: Yes No (f) Locking device: Yes No
Is dead-end required: Yes No
Testing: Yes No Magnetic particle (MPI): Ultrasonic X-Ray Other:
Comments:
DIVIDED CRANE BLOCK QUOTATION REQUESTCUSTOMER NAME DATE ADDRESS
CITY, STATE, ZIP
TELEPHONE FAX E-MAIL
1240 N. Harvard • Tulsa, OK 74115 • Ph: (918) 832-8933 / (800) 331-5460 • Fax: (918) 834-0984www.gunnebojohnson.com • sales@gjcorp.com
OVERHEAD CRANE BLOCKS From Gunnebo Johnson
STANDARD FEATURES• CMAA Classes A through C
• 5 to 1 design factor
• Bolt-type construction for ease of maintenance
• Forged hooks: 5 – 30 tons WLL
• Quenched and tempered cast alloy steel hooks 35 – 800 tons WLL
• Steel heavy duty J-latches
• Through pin lubrication
• ForgeFab™ flame hardened sheaves: 14" – 72"
• Roller Bearings
OPTIONS• Full Shrouds
• Duplex hooks: 25 - 800 tons
• Spin hardened grooves
STANDARD FEATURES• CMAA classes A through F
• 5 to 1 design factor
• Custom designed & engineered to your specifications
• Bolt-type construction for ease of maintenance
• Full shrouds
• Steel heavy duty J-latches
• Roller Bearings
• Through pin lubrication
• ForgeFab™ flame hardened sheaves: 14" – 72"
• 5 – 800 tons WLL
OPTIONS• Larger sizes available upon request
• Duplex hooks: 25 – 800 tons
• Tapered roller bearings
• Mill duty forged hooks
• AISE 6 sheaves
• Anti-rotation locking device
• Non-sparking bronze hooks
• Specially designed insulated blocks
• Spin hardened sheaves
Conventional Overhead Crane Block
Divided Overhead Crane Blocks
Motorized Crane Blocks
STANDARD FEATURES• CMAA: A through F
• Custom designed & specially engineered to your specifications
• Full shrouds
• 5 – 800 ton WLL
• 360º hook rotation
• AC or DC power
• Forgefab™ flame hardened sheaves 14" – 72"
• Roller Bearings
• Through pin lubrication
• Forged hooks: 5 – 30 tons WLL Cast alloy 35 – 800 tons WLL
• Center or side mount motors to reduce head room
• Steel heavy duty J-latches
• Bolt-type construction for ease of maintenance
OPTIONS• Larger sizes upon request
• Duplex hooks: 25 – 800 tons
• Remote control open & close hooks
• Radio control
• Tapered roller bearings
• AISE 6 sheaves
• Mill duty forged hooks
DIVIDED OVERHEAD BLOCK - SHROUDED
SHORTY J OVERHEAD CRANE BLOCK
top related