dlb bisso iroquois - bisso marine€¦ · dlb bisso iroquois. purchased in 2015, the dlb bisso...
Post on 25-Aug-2020
38 Views
Preview:
TRANSCRIPT
DLB
BISS
O IR
OQ
UO
IS
OVE
RVIE
W
JAN
201
6
CAPABILITY OVERVIEW PIPELINE
• Up to 60” Total Outer Diameter • Up to 38 s ton (35 m ton) Pipe Joints• Water Depth Operating Range <7’ to ~1,000’ (2.1m – ~300m) • Can accommodate 40’ (12.1m) to 60’ (18.2m) pipe joints• Pipelay – Single, Dual, Triple & Quad Pipeline Bundles• Pre-Commissioning & Hydrotesting • Riser, Spools, Subsea Assembly & Single/Dual Hot Tap Tie-ins• Shore Approaches & Horizontal Directional Drilling (HDD)• Casing/Crossing Pulls, “J” & “I” Tube Pulling & A/R:• Pipeline Repair, Abandonment & Reverse Lay• Steel and High Density Poly Ethylene (HDPE) • Spooled Umbilical & Cable Lay
PIPELINE BURIAL & EXCAVATION (using portable company equipment)
• Burial of up to 72” total Outer Diameter Pipelines• Burial of Active & Inactive Pipelines • Trenching to -25’ (7.62m) Below Mud Line (BML) to “Bottom of Ditch”• Self Propelled Burial Sled For “Active In Service” Pipeline Burial• Self Propelled Pipeline Excavation Sleds • Bi-Directional Sled Operations• High Pressure / High Performance – Portable 9 Stage Jet Pumps to 2,500 PSI• Successful Excavations to >100’ (30.48m) BML in Water Depths >300’ (91.4m)
OFFSHORE SURVEY
• “As Built” & “As Laid” Surveys• Position, Anchor Plot & Anchor Verification Surveys• Anomaly Avoidance & Mapping Surveys
* Project parameters will dictate specific asset limitations**Subject to project parameters, lay stress analysis & environmental conditions
DLB
BISS
O IR
OQ
UO
IS
ISO 9001:2008ISO 14001:2004
OHSAS 18001:2007
DLB
BISS
O IR
OQ
UO
ISRE
GU
LATO
RY &
BAC
KGRO
UN
D
BISSO MARINE, LLC is proud to introduce the DLB BISSO IROQUOIS. Purchased in 2015, the DLB BISSO IROQUOISwas purpose built as a very stable open ocean pipelay asset capable of performing pipelay operations in diversegeographical environments.
The barge has operated worldwide and has achieved successes in currents in excess of 7 kts (3.6 m/s) andperformed continuous pipelay operations into seas greater than 10 ft (3.28 m). The operational water depthlimitation is approximately 1,000 feet, but will vary by project.
IMO # 8758287Worldwide ServiceCLASS American Bureau of Shipping – ABS A1 Class # 7306063Flag State Republic of VanuatuPort of Registration Port VilaCall Sign YJQC2
Former Names: Brown & Root / OPI: DLB BAR-323 Global Industries: DLB GLOBAL IROQUOIS
Major Performance Upgrades:
2003 – New Tensioners and A&R winch, upgraded from 270 kips (122m tons) to 440 kips (200 m tons) for major projects in the Mediterranean
2005 - Modified Alpha Pontoon stinger to “T-Bar” design and fabricated new hitch for major Gulf of Mexico projects
2008 - Repositioned helideck to bow and installed (2) section rigid truss stinger and gantry for multi-year contract for PETROBRAS in Brazil
Barge Pipelay Performance History:
Max Ø Pipe Laid: To Date - 55.5" (1.4 m) Total Ø - 48" x 1.000" wt x 3.75" CWC
Max Depth Laid: To Date - 788 ft (240 m) Depth - 30" x .750" wt x 1.75' CWC
Max Joint Weight: To Date - 34 s ton (30.8 m ton) - 42" x 1.125" wt x 4" CWC
DLB
BISS
O IR
OQ
UO
ISG
ENER
AL S
PECI
FICA
TIO
NS
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Specifications:Length (Overall) with rigid truss stinger 580 ft 176.78 mLength (Overall) with Stinger Gantry 485 ft 147.82 mLength (Between Perpendicular) 400 ft 121.92 mHull Breadth Overall 100 ft 30.48 mHull Moulded Depth 30 ft 9.14 mMinimum Operating Draft (At High Tide) 14 ft 4.27 mFreeboard At Minimum Operating Draft 16 ft 4.87 m
All seachest intakes in sideshell to optimize shallow water access auxiliary cooling water intake options available
Maximum Operating Draft 18 ft 5.46 mFreeboard At Maximum Operating Draft 12 ft 3.65 m
Tonnage Gross tons /Net tons 10,696 st 3,208 m
Free Deck Length 127.5 ft 38.86 mFree Deck Width 45 ft 13.72 mFree Deck Area - Board Covered 5,737.5ft2 533.03 m2
Deck Load 2,400 lbs/ft2 11.71 mt/m2
Barge is configured for ZERO DISCHARGEFully Compliant Fire Fighting Alarms, Monitoring and Detection Systems
Accommodations: 256 BunksHospital - (3) Beds 305 ft2 28 m2
Project Offices 1,215 ft2 112 m2
Client Office with private head 550 ft2 51 m2
Galley 2,220 ft2 206 m2
Dual Mess Seating - 100 capacity 2,000 ft2 185 m2
Theater Seating - 72 capacity 745 ft2 69 m2
Gym 250 ft2 23 m2
Conference Room
Barge Tower:Integrated Mooring, Tensioners, A&R Winch and Davits Control SystemsRadio RoomConference RoomSuperintendent's OfficeHead
Communications:Sat Coms, Data, Fax, Weather, Sat TV, SSB, VHF, Barge Intercom, Barge Telecom System
Navigation:Radar, Gyro and Position Survey Package
Helideck:Helideck Dimension (Octagonal) 60 ft 18.28 mHelideck Weight Rating (Sikorski S-76 / Bell 412 9,700 lbs 4,400 kgAFFF Fire Fighting System
Machinery:(3) Main Generators EMD L-20-645-E9 @ 900 RPM - prime mover 7,875 kWGen #1 - 2,875 kW / 3,581 kVa / 4160 v / 3 ph/ 60 hzGen #2 / #3 - 2,500 kW / 3,125 kVa / 4160 v / 3 ph / 60 hz
(1) Auxiliary Generator - 800 kW / 1000 kVa / 460 v / 3 ph / 60 hz 800 kW
(1) Emergency Generator - 175 kW / 219 kVa / 440 v / 3 ph / 60 hz 75 kW
Ship's Air Compressors - (4) 875 CFM 3,500 CFM @ 125 psi 5,946 m3/hr @ 8.6 bar
(3) Reverse Osmosis Water Makers 1,200 gal/hr 4.542 m3/hr
DLB
BISS
O IR
OQ
UO
ISG
ENER
AL S
PECI
FICA
TIO
NS
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
DLB
BISS
O IR
OQ
UO
ISM
AIN
CRA
NE
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Main Crane:American R-40
Dynamic, Independent & Continuous Revolving
Boom Heel Pins Above Waterline 40 ft 12.1 m
Main Block Boom Length 175 ft 53.34 m
Max Main Block Lift Above Water Line 181 ft 55.16 m
Aux Block Boom Length 205 ft 62.48 m
Max Aux Block Lift Above Water Line 220 ft 67.05 m
Whip Block Boom Length 220 ft 67.05 m
Max Whip Block Lift Above Water Line 240 ft 73.15 m
Main Block Capacity Fixed & Revolving From Center Pin250 s ton @ 80 ft 226 m ton @ 24.38 m
Aux Block Capacity Fixed & Revolving From Center Pin80 s ton @110 ft 68.04 m tons @ 33.53 m
Whip Block Capacity Fixed & Revolving From Center Pin20 s ton @ 200 ft 13.6 m tons @ 67.06 m
Distance From Center Pin To Stbd/Port Side 50 ft 15.24 m
Distance From Center Pin To Stern 70 ft 21.33 m
DLB
BISS
O IR
OQ
UO
ISLO
AD C
HART
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
DLB
BISS
O IR
OQ
UO
ISCA
PACI
TIES
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Tank Capacities:
Fuel 534,428 gal 2,023 m3
Lube 2,411 gal 9.1 m3
Dirty Oil 1,690 gal 6.39 m3
Ballast Water 1,489,206 gal 5,637 m3
Fresh Water 79,000 gal 299 m3
Potable Water 60,000 gal 227 m3
Industrial Fresh Water 352,503 gal 1,334 m3
(Recirculation System For Cold Water Operations)
Below Deck Storage and Shop Space:
Dry Stores 7,000 ft3 198.2 m3
Freezer 2,140 ft3 60.6 m3
Refrigeration 2,570 ft3 72.7 m2
Machine and Mechanical Shop 950 ft2 27 m2
Electrical Shop 360 ft2 10.1 m2
Carpentry Shop 140 ft2 4 m2
Warehouse 1,800 ft2 51 m2
Deck Crane:Manitowoc 4100W S2 Crawler – As Configured
Boom Length 110 ft 33.52 m
Capacity with 110 ft (33.52 m) Boom @ 26 ft (7.92 m) from center of rotation 131 s ton 118.8 m ton
DLB
BISS
O IR
OQ
UO
ISST
ATIO
N K
EEPI
NG
-M
OO
RIN
G S
YSTE
M
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Mooring System:(10) Intercon K7230 SD-250 - Single Drum - Load Monitoring & Line Counter System
(3) Bow Fairleads – Port Bow, Center Bow, Starboard Bow(2) Bow Breasts Fairleads – Port Bow Breast, Starboard Bow Breast(2) Stern Breast Fairleads – Port Stern Breast, Starboard Stern Breast(4) Stern Fairleads - Port Stern, Center Stern, Alt Center Stern, Starboard Stern
- Center Stern can be run to alternatively placed Stern Starboard fairlead to avoid interference with the stingers
Max wire length x Min wire Ø 6,600' x 2.25“ 2,011 m x 57 mmMin wire length x Max wire Ø 5,300' x 2.5“ 1,615 m x 63.5 mm
Max Pulling Capacity per Winch320 kips @ 80 ft/min 145.1 m ton @ 24.3 m/min
Drum Brake per Winch 744 kips 337.4 m ton
Buoy Pennant Spoolers - 30 s ton (27.2 m ton) 1,500' x 2.5“ 457.2 m x 63.5 mm
Shore Pull System:Uses Center Stern Mooring Winch – Performances Listed Above
Anchors:Project Specific / Varies By Seafloor Conditions
Flipper Delta (mud and clay conditions) – Bow 16.5 s ton 15,000 kgFlipper Delta (mud and clay conditions) – Stern 14.8 s ton 13,500 kgFlipper Delta (mud and clay conditions) – Breast 13.2 s ton 12,000 kg
Bruce FFTS MK4 (sandy conditions) 14.8 s ton 13,500 kg
DLB
BISS
O IR
OQ
UO
ISST
ATIO
N K
EEPI
NG
•
TYPI
CAL
MO
ORI
NG
SPR
EAD
•M
OO
RIN
G W
INCH
PER
FORM
ANCE
Spec
ifica
tions
subj
ect
to ch
ange
with
out n
otic
e
Typical 8 or 10 point mooring arrangement (above), center stern can be run out immediately astern or run to analternate starboard stern fairlead to avoid any stinger interference
DLB
BISS
O IR
OQ
UO
ISTY
PICA
L G
ROU
ND
TACK
LE A
RRAN
GEM
ENTS
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
DLB
BISS
O IR
OQ
UO
IS
PIPE
LAY
SYST
EM
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Pipehandling System:
Remotely Operated Pipehandling System - Up to 60"ØPipe Conveyor Rollers 12Pipe Transfer Rack Capacity Up to 6 jointsAdjustable Alignment Rollers 3Fixed Half Track Rollers FWD of Tensioners 3Adjustable Rollers AFT of Tensioners 3
Tensioners:
Horizontal Track Type – Maximum Clearance 84 in (2.13 m) to pass laydown/pullheads
Pipe Range Min Ø with V shoes 4 in (101.6 mm) Max Ø with O shoes 60 in (1,524 mm)
SAS SVE100 LCS30AC #1 - (220,088 lb ft / 979 kN) 220 kips 100 m tonSAS SVE100 LCS30AC #2 - (220,088 lb ft / 979 kN) 220 kips 100 m tonTotal Tension Capacity 440 kips 200 m ton
Nominal Pay Out Rate at 220 kips (100 m ton) 98 ft/min (30 m/min)Nominal Take Up Rate at 220 kips (100 m ton) 82 ft/min (25 m/min)
Provides suitable tension on a pipeline with a Field Joint gap up to 2.6 ft (.8 m)
Abandonment & Recovery (A&R) Winch:
SAS ARW 200E (Full drum) 440 kips 200 m tonLevel Wind (Underwound)
Nominal Pay Out Rate (Full Drum) 98 ft/min 30 m/min
Standard Wire on Drum 5,000 ft x 3 in 1,524 m x 76 mm Max Drum Capacity 5,741 ft x 3.5 in 1,750 m x 89 mm
DLB
BISS
O IR
OQ
UO
IS
TEN
SIO
N M
ACHI
NES
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Capacity up to 84” (2133.6mm) Ø passing through tensioner to
accommodate pull & laydown heads and valve assemblies
DLB
BISS
O IR
OQ
UO
IS
PIPE
LAY
SYST
EM
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Firing Line:Conventional S-LayFully Enclosed Pipe Handling, Pipe Transfer and Firing Line Overhead Gantry and Dolly System throughout Firing LineJoint Removal Hatch Above Alignment Station
Work Stations for 40 ft (12.1m) joints 8 StationsCan be modified for 60 ft (18.28 m) joints
Welding Stations - Dynamic "Go Carts“ at Welding Stations 4 Stations NDT / Repair 1 Stations Sand Blasting 1 Stations Joint Infill - Coating & Foam 2 Stations
Automatic Welding Performance (estimated):8”Ø x .750”wt – 10 to 11 welds/hr26”Ø x .625”wt – 7 to 8 welds/hr36”Ø x .750”wt – 6 to 7 welds/hr48”Ø x 1.000”wt – 5 to 6 welds/hr
Welding Machines (400 amp to 600 amp) (50) Total
Firing Line & Ramp:Firing Line Length - FWD of First Tensioner 259 ft 78.94 mFiring Line Width at Welding Stations 18 ft 5.48 mFiring Ling Minimum Height 16 ft 4.87 mRamp Length 138 ft 42.06 mRamp “Angle” ~5.5°Ramp Arc Radius 1,130 ft 344.4m
Davits:(6) Skagit PD-75 - Chain Davits - (5) in place 75 s ton 68 m ton
@ 50° Outreach (Up to 40° Side-loading) Davit Boom Length 25 ft 7.62 m
Chain Size 900 ft x 2 in 274.3 m x 50.8 mm
DLB
BISS
O IR
OQ
UO
IS
WO
RK S
TATI
ON
LAY
OU
T
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
40 Ft (12.1m) Pipe Joint Layout
DLB
BISS
O IR
OQ
UO
IS
RIG
ID T
RUSS
STI
NG
ER &
RO
LLER
SET
TIN
GS
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Example of Typical Stinger & Barge Roller Settings Profile
DLB
BISS
O IR
OQ
UO
IS
STIN
GER
SYS
TEM
S
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Stingers:
All Stingers are designed and fabricated with a 38.5 s ton (35 m ton) per pipe joint working capacities.
Primary Stinger:
Rigid Truss Type - (2) Section Adjustable Angle Total 185 ft 56.38 m
First "Hitch" section, (7) Adjustable Rollers 102 ft 31.08 m
Second Section, (7) Adjustable Rollers 83 ft 25.29 m
Deeper Water Stinger:
Alpha Pontoon - (5) Section Adjustable Angle Floating 300 ft 91.44 m
Each Section 60 ft (18.28 m), (2) Adjustable Rollers per Section, can be used in (2) to (5) sections arrangements depending on project specifics
“T Bar” Hitch Quick Connection
Fully Adjustable Hitch with Locking Pins
42 in (1.06 m) Ø - Main Pontoon Chords
Specialty Shallow Stinger:
Ladder Stinger - (1) Section 110 ft 33.25 m
(5) Adjustable Rollers
DLB
BISS
O IR
OQ
UO
IS
SAM
PLE
-LAY
TEN
SIO
N S
CHED
ULE
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Example of Typical Lay Tension Schedule – Illustrating a 30” x .750’wt with various concrete weight coatings
(1.75” – 2.75”), laid between 43 ft (13m) and 788 ft (240 m) requiring a maximum barge tension of 240 kips
DLB
BISS
O IR
OQ
UO
IS
SAM
PLE
-STI
NG
ER &
RO
LLER
SET
TIN
GS
Spec
ifica
tions
subj
ect t
o ch
ange
with
out n
otic
e
Example of Typical Stinger & Barge Roller Settings
PIPE
LIN
E SU
RVEY
Examples of Typical “As-Built” and Anchor Verification
Example of Typical Anchor Placement and Anomaly Avoidance
Example of Typical Mesotech usage to image theseafloor and guide the project execution teamduring subsea and sub-seafloor infrastructureinstallations, particularly in zero-visibility waterconditions.
top related