dresser sleeves trans style 97

For splits and leaks on steel pipe

Form No. 97/4-05R1.5M

PROD

UCT

DATA

Dres

ser P

ipin

g Sp

ecia

lties

Dresser, Inc.41 Fisher AvenueBradford, PA 16701Ph: (814) 362-9200Fax: (814) 362-9333Email: dmdsales@dresser.com

www.dressercouplings.com

Nominal Overall Overall NPT Overall Seal Approx. WeightSize Diameter Width Plugs Length Length Per Sleeve(In.) (A) (In.) (B) (In.) (In.) (C) (In.) (In.) (Lbs.)

3 5.5 8.3 1/2 8.5 5 424 6.3 10.5 1/2 8.5 5 656 8.6 12.6 1/2 9 5 858 10.5 15 1/2 9 5 12010 12.7 17.5 1/2 9 5 13512 15 20 1/2 9 5 150

16 19 24.6 1/2 12 8 32020 23 29.5 1/2 12 8 52524 27 36.4 1/2 13 8 680

30 33.4 41.3 1/2 13 8 86536 40.1 48.7 1/2 13 8 130042 47.3 56.5 1/2 15.5 8 215048 53.2 64 1/2 18 8 2890

Style 97 Split Repair SleeveSpecifications for Sizes 3” thru 48”

• Designed for fast, simple repair of holes, cracks or splits insteel pipe up to 48” in diameter.

• All sleeves are factory-tested to 1.5 times rated pressureper API 6H.

• Sleeves come completely factory-assembled for quick installation.• Weldable option for permanent repair requirements.

Style 97*PressureRatings

Size 3”- 48”Up to ANSI 600

1440 psi

Special lengths, larger diameters and metric sizes are available on request.Please consult factory with your particular application requirements.

TemperatureRatings

(Per Application)

*NOTE:All Dresser

Style 97 sleevesare factory-testedto 1.5 times thepressure rating

per API 6H.

Body: Carbon Steel to ASTM A515/516;Cast to ASTM 216Studs: Carbon Steel to ASTM A193Hex Nuts: Carbon Steel to ASTM A194Seal Retainer: SteelSeals: Nitrile RubberHinge Bracket: SteelHinge Pin: SteelNPT Plugs: Carbon Steel

Materials of Construction

The Style 97 WeldableSplit Repair Sleeve