elastomeric perimeter seals automatic door bottom seals
Post on 27-Mar-2022
11 Views
Preview:
TRANSCRIPT
All seals proudly manufactured in Australia
80
00
Ser
ies
71
Automatic Door Bottom Seals
IS8020si
A heavy duty, automatic door bottom seal which can be face-fixed or fully mortised into the bottom edge of single action doors. The seal has a spring loaded mechanism which lifts the seal clear of the floor as soon as the door is opened. Pressure against the door jamb on the adjustable brass strike button operates the seal automatically.
Face-fixed: The seal is fixed to the face of the door bottom using the long fixing screws provided. (see detailed fitting instructions). The reversible aluminium top cover plate conceals the fixing screws and provides an aesthetic, architectural finish. A set of screw-fixed reinforced nylon end plates ensure longevity of the seal mechanism.
Fully-mortised: When the seal is to be fully-mortised, the seal (minus the top cover plate) is mounted into a 54mm deep x 22mm wide machined groove and screw-fixed back into the door stiles via stainless steel end plates, holding the seal in place.
Semi-rebated: When the seal is to be semi-rebated, the seal is mounted into a stepped rebate: a 54mm deep x 22mm wide machined groove on the side of the door to which the seal will be positioned. The seal can be screw-fixed into position and fitted with the cast-aluminium end plates provided.
The seal contains a high efficiency mechanism to assist with the closing force requirements detailed in AS1428/1 (Design for Access and Mobility).
Gap size
• Min. 3mm / max. 15mm
Standard lengths
• 450mm
• 610mm
• 820mm
• 920mm
• 1070mm
• 1220mm
• 1500mm
(*Longer length available to special order up to a maximum 1600mm)
IS8020si maximum allowable cut-back sizes:
• 450mm seal cuts to 275mm
• 610mm seal cuts to 450mm
• 820mm seal cuts to 610mm
• 920mm seal cuts to 610mm
• 1070mm seal cuts to 920mm
• 1220mm seal cuts to 1070mm
• 1500mm seal cuts to 1220mm
(*Seals can be cut on site for exact dimension)
Standard colours
• Silver anodised aluminium with grey end plates (or stainless steel end plates) and grey silicone gasket
• Black anodised aluminium with black end plates (or stainless steel end plates) and black silicone gasket
Approval/s
• Fire tested to AS1530 Part 4 in accordance with AS1905 Part 1
• Certifications GVYI.R26629, GVWZ.R26629, GVWZ7.R26629
• Medium temperature smoke leakage approvals to AS1530 Part 7, compliant with AS6905 on proprietary door assemblies
• Conforms with BCA Specification C3.4 smoke sealing requirements
• Acoustically tested in accordance with AS1191, IS0140.3 and ISO10140-2
• Durability tests demonstrating over 1,000,000 open & close cycles
21
15
68
IS8020si
For more product information please scan QR code or visit www.kilargo.com.au/ourproducts/is8020si/
A heavy duty, automatic door bottom seal which can be face-fixed or fully mortised into the bottom edge of single action doors. The seal has a spring loaded mechanism which lifts the seal clear of the flooras soon as the door is opened. Pressure against the door jamb on the adjustable brass strike button operates the seal automatically.
Face-fixed: The seal is fixed to the face of the door bottom usingthe long fixing screws provided. (see detailed fitting instructions).The reversible aluminium top cover plate conceals the fixing screws and provides an aesthetic, architectural finish. A set of screw-fixed reinforced nylon end plates ensure longevity of the seal mechanism.
Fully-mortised: When the seal is to be fully-mortised, the seal (minus the top cover plate) is mounted into a 54mm deep x 22mm wide machined groove and screw-fixed back into the door stiles via stainless steel end plates, holding the seal in place.
The seal contains a high efficiency mechanism to assist with the closing force requirements detailed in AS1428/1 (Design for Access and Mobility).
21
15
68
IS8020si
Face-fixed
Fully mortised
15 Wentworth Pl, Banyo QLD 4014, AustraliaP +61 7 3635 5000 F +61 7 3861 9266 E sales@kilargo.com.au W kilargo.com.au
Kilargo IS8020si | Last edit 10/04/2018
15 Wentworth Pl, Banyo QLD 4014, AustraliaP +61 7 3635 5000 F +61 7 3861 9266 E sales@kilargo.com.au W kilargo.com.au
Kilargo IS1212/1515 Flexi-Wing Datasheet | Last edit 26/03/2018
All seals proudly manufactured in Australia
100
0 S
erie
s
17
Elastomeric Perimeter Seals
IS1212 IS1515
15
15
12
12
IS1212, IS1515 Flexi-Wing®
These self-adhesive perimeter seals are fitted in the rebate of a door frame to contain smoke, sound, draughts, dust and light. Strategically located in the impact free zone, the seal adheres to the frame quickly and easily without having to remove the door.
The seal consists of a semi-rigid flame retardant PVC carrier combined with twin elastomeric sealing blades. An aggressive self-adhesive backing tape is situated on both sides of the carrier. NB. To ensure proper adhesion, contact surfaces must be clean & any paint well-cured.
Gap size
• IS1212: Required door clearance 2-3mm
• IS1515: Required door clearance 4-5mm
Door set standard lengths
• Single: 1 x 1000mm, 2 x 2100mm
• Long Single: 1 x 1000mm, 2 x 2750mm
• Double: 3 x 2100mm
• Long Double: 1 x 2100mm, 2 x 2750mm
Standard lengths
• 1000mm
• 2100mm
• 2400mm
• 2700mm
• 3000mm
Standard colours
• Black
• White
• Clear
• (Dark brown and grey available to special order)
Approval/s
• Fire tested to AS1530 Part 4 in accordance with AS1905 Part 1
• Certifications GVYI.R26629, GVWZ.R26629, GVWZ7.R26629
• Medium temperature smoke leakage approvals to AS1530 Part 7 available on proprietary door assemblies
• Acoustically tested in accordance with AS1191, IS0140.3 and ISO10140-2
• Durability tests demonstrating over 100,000 open & close cycles
For more product information please scan QR code or visit www.kilargo.com.au/ourproducts/is1212/
top related