enhanced met one 3400 series portable airborne particle counters
Post on 31-Dec-2015
48 Views
Preview:
DESCRIPTION
TRANSCRIPT
Presented to: Name of Customer
Enhanced MET ONE 3400 SeriesEnhanced MET ONE 3400 Series Portable Airborne Particle Counters Portable Airborne Particle Counters
Enhanced MET ONE 3400 SeriesEnhanced MET ONE 3400 Series
AgendaAgenda
• MET ONE 3400 Series Overview– You talked, we listened!– Introduction to enhanced MET ONE 3400
• Features and Benefits• MET ONE 3400 = Lower Cost of Ownership• Part Numbers
You Talked, We ListenedYou Talked, We ListenedYour NeedUnique communication requirement for customer sites
Seamless integration to existing data management software
Simple and fast validation and compliance testing
Intuitive easy to use instrument
Low cost continuous process monitoring using portable counter
Our SolutionFlexible communication options for connectivity through existing communication network
OPC server for integration to third party software
Pass/fail test wizard for ISO, EU-GMP, FS and BS standards
Simple Icon driven software and fast instrument set up and data collection
Manifold connectivity
Introduction to MET ONE 3400 SeriesIntroduction to MET ONE 3400 Series
The enhanced 3400 portable air particle counter!The enhanced 3400 portable air particle counter!
• Flexible communications for ease of connectivity utilizing an existing network
• Intuitive user interface for reduced operator time for collecting and managing data for compliance
• OPC server based open architecture for seamless connectivity to third party SCADA software
• Designed to fully comply with ISO 21501-4 calibration standard for data accuracy and consistency between counters
• Manifold compatibility• Long Life Laser™ for lower cost of
ownership
Flexible Communication Options!Flexible Communication Options!
• Ethernet• Wireless• Serial RS-485 (Modbus or FX)• USB• Serial Manifold Connectivity
Flexible Communication Options - EthernetFlexible Communication Options - Ethernet
Ethernet TCP/IP based I/O for FMS connectivity
Flexible Communication Options - WirelessFlexible Communication Options - Wireless
Optional Wireless 802.11 b/g based I/O for FMS connectivity
USB connectivity for data retrieval through PortAll software
Flexible Communication Options Flexible Communication Options Serial RS-485 (Modbus or FX)Serial RS-485 (Modbus or FX)
Serial RS-485 I/O for FMS connectivity with
Modbus or FX protocol options
Flexible Communication Options - ManifoldFlexible Communication Options - Manifold
Manifold connection
Auxiliary connection for Filter probe
Intuitive User Interface!Intuitive User Interface!
• Wizard to conduct pass/fail test for ISO, EU-GMP, FS and BS standards
• Improved area and sample location management
• Easy sampling recipe management through ‘Group’ menu
• Multiple user level log in for data security
Intuitive User Interface!Intuitive User Interface!
Test wizard for ISO, EU-GMP, FS, and BS standard complianceTest wizard for ISO, EU-GMP, FS, and BS standard compliance• Wizard to conduct pass/fail test for
ISO, EU-GMP Annex I, FS 209E and BS5295 standards
• No expertise in standards required. Few clicks to compliance
• The wizard guides an operator step by step to sample data, process data and product reports
Intuitive User Interface!Intuitive User Interface!
Better area/location managementBetter area/location management
• Multiple locations with unique location ID and repeatable location name can be created
• A group of locations can be assigned to a larger cleanroom space called an ‘area’
• Location setting can be copied
Intuitive User Interface!Intuitive User Interface!
Better group managementBetter group management
• Group is a collection of desired sampling parameters
• New group can be created or existing group can be loaded
• A location can be added to or removed from a group
• ‘Settings’ button allows pre-selecting sampling parameters such as sampling time, delay, hold time, count and environmental alarm, etc.
Intuitive User Interface!Intuitive User Interface!
21 CFR Part 11 compliance: unique user log in21 CFR Part 11 compliance: unique user log in
• Multiple level of user accounts – Basic (no log in)– Operator– Administrator
• No limits to number of log in accounts• An administrator can create operator level user
account and assign selective access rights and group access
Intuitive User Interface!Intuitive User Interface!
Sampling methodSampling method
• By Group
• By Location
MET ONE 3400 Features/BenefitsMET ONE 3400 Features/Benefits
Flexible Communication Options (Ethernet, Wireless, Serial, USB)
Wizard for pass/fail test. Few simple clicks to comply with
ISO/EU-GMP/FS or BS standards
OPC server enabled open communication architecture
Intuitive user interface – Easy area, location and replication
FeatureFeature
Easy integration to environment monitoring software
Savings in time and labor for planning, sampling and
processing raw count data
Reduces cost of integration to third party industrial data
management software
Saves operator time for setting and running the counter
BenefitBenefit
MET ONE 3400 Features/BenefitsMET ONE 3400 Features/Benefits
Password protected multiple level user log in
FeatureFeature
Data security for 21 CFR Part 11 compliance
Full ISO 21501-4 calibration compliance
Unit-to-unit accuracy and reproducibility
Long Life LaserTM with 10-years average MTTF
Reduced cost of ownership
Supports manifold for semi-continuous process monitoring
Low cost near continuous monitoring options
BenefitBenefit
Long continuous operation with dual hot swappable batteries
Longer instrument availability – optimization of operator hours
MET ONE 3400 = Lower Cost of OwnershipMET ONE 3400 = Lower Cost of Ownership• REDUCE COST of transferring data to a data management
system utilizing existing communication network with flexible communication options
• SAVE OPERATOR TIME for training, planning, sampling and processing of test data with wizard for pass/fail test
• REDUCE COST of integrating the counter to data management system with seamless connectivity to third party SCADA system through OPC server based open communication architecture
• SAVE OPERATOR SET-UP TIME with intuitive user interface software with icon driven menu
• REDUCE OVERALL COST OF OWNERSHIP with Long Life Laser™
Enhanced MET ONE 3400 Series Part NumbersEnhanced MET ONE 3400 Series Part NumbersPart Number Description
2088900-01 3413 UPDATED 1CFM 0.3/10µM
2088900-02 3415 UPDATED 1CFM 0.5/10µM
2088900-03 3415 UPDATED 1CFM 0.5/25µM
2088900-11 3423 UPDATED 50LPM 0.3/10µM
2088900-12 3425 UPDATED 50LPM 0.5/10µM
2088900-13 3425 UPDATED 50LPM 0.5/25µM
2088900-01-W 3413 UPDATED 1CFM 0.3/10µM, WIRELESS
2088900-02-W 3415 UPDATED 1CFM 0.5/10µM, WIRELESS
2088900-03-W 3415 UPDATED 1CFM 0.5/25µM, WIRELESS
2088900-11-W 3423 UPDATED 50LPM 0.3/10µM, WIRELESS
2088900-12-W 3425 UPDATED 50LPM 0.5/10µM, WIRELESS
2088900-13-W 3425 UPDATED 50LPM 0.5/25µM, WIRELESS
Note:- Please refer to the user manual for details about part numbers for accessories and options- Part numbers for updated 3400 models are different from current existing 3400 part numbers- Contact a Hach customer service representative for latest pricing information and proposal
Standard Shipment IncludesStandard Shipment IncludesItem Number
Description
1 3400 series particle counter
2 Rechargeable Battery (1 unit)
3 AC adapter
4 Power cord US
5 Power cord EU
6 Thermal printer paper (2 rolls)
7 Clamp, isokinetic probe holder
8 Tripod, isokinetic probe holder
9 Isokinetic probe
10 Extension tubing for isokinetic probe
11 Zero count filter
12 RS 485 connector assembly
13 USB drive (1 unit)
14 Intake cleaning brush
15 Wireless antenna for optional Wi-Fi Unit
16 Stylus for touch screen interface
Enhanced MET ONE 3400 SeriesEnhanced MET ONE 3400 Series
top related