exhaust extraction channel duct - type 25 in extruded aluminum · channel duct type 25 in extruded...
Post on 10-Feb-2020
6 Views
Preview:
TRANSCRIPT
The Geovent Channel Duct, type 25, is for the extraction of exhaust gas and welding fumes, etc. With up to 48 m duct, the Channel Duct ensures a large working area to the operator, because then he is not dependent on fixed extraction areas, since the trolley may be moved/slid to the required area. The duct may be equipped with up to six trolleys in total. At test stands with up to six trolleys in total. At test stands with linear flow and in medium sized and large garages, the Channel Duct is utilised optimally.Easy operation:The hose trolley is equipped with 6 smoothly rolling nylon wheels, ensuring easy movement of the trolley. Further-more, the nuisance of having heavy, rolled-out hoses on the floor is avoided. The Channel Duct is available with a substantial variety of accessories, facilitating the daily work for the operator: Electrical, wireless forward and return transport, compressed air nozzles for automatic dismounting of the exhaust, etc.Easy installation:We have made great efforts to ensure the easy instal-lation of our Channel Duct with accessories, meaning that the Duct may be installed very quickly, thus saving money for the erecting engineer.We shall be pleased to help with the dimensioning.
Exhaust Extraction
Channel Duct - Type 25 in extruded aluminum
Channel Duct
Cross section of channel duct
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
Channel Duct - Type 25 in extruded aluminum
5
250Volumenstrøm [m³/h]
Tryk
tab
[Pa/
m]
Tryktabstabel for slædekanal type 25
45
10
15
20
25
30
35
40
50
55
500 750 1000 1250 1500 1750 2000 2250 2500 2750
Air Flow (m3/h)
Channel duct type 25
(Pa/
m)
75
150
Volumenstrøm [m³/h]
Tryk
tab
[Pa]
Tryktab for slangevogn uden slange
675
150
225
300
375
450
525
600
750
825
300 450 600 750 900 1050 1200 1350 1500 1650
Air Flow (m3/h)
(Pa/
m)
Channel duct without hose
Air Flow (m3/h)
(Pa)
Pressure drop
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
200 400 600 800 1.000 1.200 1.400 1.600
1.000
2.000
3.000
4.000
5.000
6.000
1.800
Volumen-strøm[m3/h]
Tryktab [Pa]
5 m Ø150 mm
10 m Ø150 mm
5 m Ø125 mm
10 m Ø125 mm
5 m Ø100 mm
10 m Ø100 mm
5 m Ø80 mm
10 m Ø80 mm
7,5 m 7,5 m
7,5 m Ø125 mm
7,5 m
Channel Duct - Type 25 in extruded aluminum
Pos. Art. No. Description
C 07-400 Channel Duct, type 25 in extruded aluminum with heat-resistant neoprene rubber lips
L2 07-401 Channel connecting link, made of galvanised steel plate, for the connection of two lengths of Chan-nel Duct
- 07-401A
- 07-402 A assembly parts, misc. Accessories for the installation of the channel (1 set is necessary per duct length)
E/H 07-403 End cover, type 25, in galvanised steel
F 07-477 End stop for trolley
- 07-478 Spring stop for trolley
I 07-406 End transition piece, nipple ø250 mm, end of channel Duct to round duct.
J 56-064 Reduction, galvanised, coupling ø250 mm / nipple ø160 mm
K 56-065 Reduction, galvanised, coupling ø250 mm / nipple ø200 mm
D 07-408 Transition for top installation, nipple ø160 mm, from top of Channel Duct to round duct
D 07-409 Transition for top installation, nipple ø200 mm, from top of Channel Duct to round duct
- 04-411 Trolley, type 25, of epoxy enamelled steel, without damper, complete with 6 smoothly rolling nylon wheels and ø160 mm nipple connection.
Channel Duct, type 25 in extruded aluminum. The Channel Duct is supplied in lengths of 2,4 and 6 m
Ordering table for Channel Duct
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
G1 3
Channel Duct - Type 25 in extruded aluminum
Pos. Art. no Model
G 07-656 Suspension bracket, type 60, in galvanised steel. Used both for mounting in the ceiling and on the wall (one required per 2-4 m duct). To be replaced by 07-655, suspension bracket, type 160, when mounted on the side of a concrete beam
K 07-422 Coupling bracket for spacer pipe (set of two), galvanised. Two sets required per point of fixation.
L 07-424 Spacer pipe 3/8”, galvanised for 07-422 coupling bracket (required number = 4 x eight from duct to ceiling)
A 07-662 Rocking bracket for ceiling installation. Two brackets required per ponit of fixition
G1 07-655 Suspension bracket, type 160, galvanised plate for installation on the side of a concrete beam. Three installation on heights (07-456 suspension bracket, type 60 is not required when using this type of bracket.
The Geovent Channel Duct is suitable for ceiling or wall installation or on the side of a concrete beam. Geovent has developed a set of various brackets, facilitating the installation of the Channel Duct. The Duct should be fixed every 2-4 m.
Pos. Art. no. Model
- 56-042 Reduction MF160/NP80
- 56-043 Reduction MF160/NP100
- 56-044 Reduction MF160/NP125
- 56-045 Reduction MF160/NP150
- 56-060 Adapter for mounting WING/COMPACT arm on trolley 25
- 07-710 Multi-hose suspension WGS (hook) on neoprene rubber/galvanised steel. For sizes ø76 – ø150 mm.
- 07-421 Wire WGS with ting, 3 m wire and assembly kit for the installation on damper set (N) and hose suspension (T)
- 07-712 Multi - hose suspension on LWS in neoprene rubber/galvanised steel. For hose sizes ø76 – ø152 mm. Used in connection with spring balancers (Z)
Ordering table for Channel Duct
Hose suspension bracket parts for Channel Duct
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
Channel Duct - Type 25 in extruded aluminum
Description of channel duct
A: End coverB: Ceiling bracketC: BalancerD: Hose mount LWSE: Rubber NozzleF: Suspension Bracket type 160G: Wall mountH: Extraction Arm (WING/COMPACT)I: ConnectionJ: Outlet Flange, topK: Hose Reel with NozzleL: End stopM: Channel reduction, endN: Pivotable arm 180° or 360°
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
F
G
H
K
L
M
N
E
J
C
D
A
I
B
Channel Duct - Type 25 in extruded aluminum
Accessories
Examples for special solutions
We have a lot of standard products, but also a lot of special products• For automation there are wireless automation• Springbalance can be mounted at the time or later• Hose and nozzles for special need, it is possible to
order
Contact Geovent for more information
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
Channel Duct - Type 25 in extruded aluminum
Here are some pictures
HOVEDGADEN 86 • DK - 8831 LØGSTRUP • Tlf.: (+45) 8664 2211 • E-mail: salg@geovent.dk
top related