exterior doors - dako
Post on 16-Oct-2021
18 Views
Preview:
TRANSCRIPT
WITH ATTACHMENT PANEL | PVC | TIMBER | ALUMINIUM
EXTERIOR DOORS
EXTERIOR DOORS
“...who are you?
The character of the house reflects the personality of its hosts. Door is perceived as their hallmark that
allows the guests to answer the question...
The space in which we have been living influences the quality of our life and the possibility of shaping it gives us a chance to decide about this quality. From the choice of home design and dominant colours in it, to the selection of ornament elements - with every single decision we create, in significant way, our future.
Among all these decisions, the choice of the door occupies the important place. The door symbolises a new opening, a beginning, and a welcome, but also a shelter and kind of barrier. Not only its ambiguity, but also a clear distinction concentrates the attention of the passers-by and the guests. Due to this ambiguity, and the important place the doors occupy, they determine the character of the house as any other element.
I sincerely encourage you to make the conscious and reasoned choice.
Osamu Ono - for 25 years he has been involved in shaping the space by designing not only modern mansions but also commercial buildings of high technology. He specializes in energy saving and environmentally friendly buildings by appealing to tradition and the achievements of Japanese contemporary architecture and design. Since 5 years he has been recommending DAKO products to his clients. He lives and works in Japan.
Choose your model:
On www.dako.eu website you can design your own model of door by using the door configurator available online.
aluminium | timber | pvc
s. 6Models
s. 98Construction, equipment and colours of PVC doors
s. 104Construction, equipment and colours of timber doors
s. 108Construction, equipment and colours of aluminium doors
s. 114HarmonyLine
p. 80Noel p. 84Zola p. 88Keira
p. 92Ombra p. 92Perla
p. 92Meva p. 92Scala p. 92Safir
p. 92Canis p. 92Felis p. 92Lux
p. 6Tala p. 10Taida p. 14Sotera p. 18Nila p. 22Niceta p. 26Kora p. 30Eunika p. 34Feba
p. 38Fotyna p. 44Idalia p. 48Argea p. 52Alla p. 56Zoe p. 60Alba p. 64Dalia p. 68Lilla
p. 72Stella p. 76Tulia
TABLE OF CONTETNS
4 5
22
Model w konfiguracji standardowej
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCTALA82 mmAnthracite (RAL 7016) White (RAL 9016)From outside: millingsQ-10, L. 1000 mm1100 / 2105 mm
PVC
Check standard and optional equipment on page 98
TALA modelTALA
6 7
Check standard and optional equipment on page 104
108Check standard and optional equipment on page
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMTALA90 mmSilver (RAL 9006) Silver (RAL 9006)From outside: millingsQ-10, L. 1500 mm1120 / 2100 mm
TIMBERTALA92 mmOld pineOld pineFrom outside: millingsP-10, L. 1000 mm1100 / 2115 mm
TIMBER
ALUMINIUM
TALA
9 8
ALUMINIUM
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMTAIDA90 mmNut (2178.007)Nut (2178.007)Bilateral applications made of matt and brushed stainless steel; veneer as an optionP-10, L. 1600 mm1120 / 2100 mm
Check standard and optional equipment on page 108
Available in composition
TAIDA modelTAIDA
10 11
PVC
Check standard and optional equipment on page 104
98Check standard and optional equipment on page
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCTAIDA82 mmDark brown (RAL 8017) White (RAL 9016)From outside: applications made of matt and brushed stainless steelP-10 L. 1600 mm1100 / 2105 mm
TIMBERTAIDA92 mmTeakTeakFrom outside: applications made of matt and brushed stainless steelP-10, L. 800 mm1100 / 2115 mm
TIMBER
TAIDA
13 12
PVC
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCSOTERA82 mmAnthracite (RAL 7016) White (RAL 9016)From outside: millingsP-10, L. 1500 mm1100 / 2105 mm
Check standard and optional equipment on page 98
SOTERA model
Available in composition
SOTERA
14 15
16 17
ALUMINIUM
Check standard and optional equipment on page
Check standard and optional equipment on page
104
108
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERSOTERA92 mmPalisanderPalisanderFrom outside: millingsP-10, L. 800 mm1100 / 2115 mm
ALUMINIUMSOTERA90 mmBasalt grey (RAL 7012)Basalt grey (RAL 7012)From outside: millings; unilateral inlay as an optionP-10, L. 1500 mm1120 / 2100 mm
TIMBER
SOTERA
17 16
TIMBER
MaterialModel
ThicknessExternal colourInternal colour
Description
Handle Dimensions
TIMBERNILA92 mmChocolate brown (RAL 8017)Chocolate brown (RAL 8017)From outside: applications made of matt and brushed stainless steel; millingsSilver on long handle plate1100 / 2115 mm
Check standard and optional equipment on page 104
NILA model
Available in composition
NILA
18 19
ALUMINIUM
PVC
Check standard and optional equipment on page
Check standard and optional equipment on page
108
98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMNILA90 mmWhite (RAL 9016)White (RAL 9016)From outside: applications in Winchester colour(49240); millingsQ-10, L. 580 mm1120 / 2100 mm
PVCNILA82 mmAnthracite (RAL 7016)White (RAL 9016)From outside: applications in Winchester colour(49240); millingsQ-10, L. 1400 mm1100 / 2105 mm
NILA
21 20
Model w konfiguracji standardowej
TIMBER
MaterialModel
ThicknessExternal colourInternal colour
Description
HandleDimensions
TIMBERNICETA92 mmOld pineOld pineFrom outside: applications made of matt and brushed sta-inless steel.; millings; no possibility of transparent glassSilver on long handle plate1100 / 2115 mm
Check standard and optional equipment on page 104
!
NICETA model
Available in composition
NICETA
22 23
ALUMINIUM
PVC
Check standard and optional equipment on page
Check standard and optional equipment on page
108
98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMNICETA90 mmMaroon (RAL 3005)Maroon (RAL 3005)Bilateral applications made of matt and brushed stainless steel; unilateral millings; no possibility of transparent glassQ-10, L. 1000 mm1120 / 2100 mm
PVCNICETA82 mmGolden oak (2178.001)White (RAL 9016)From outside: applications made of matt and brushed stainless steel; millings; no possibility of transparent glassQ-10, L. 1000 mm1100 / 2105 mm
NICETA
25 24
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCKORA82 mmSilver grey (RAL 7001)White (RAL 9016)From outside: millingsQ-10, L. 1500 mm1100 / 2105 mm
PVC
Check standard and optional equipment on page 98
KORA modelKORA
26 27
ALUMINIUM
Check standard and optional equipment on page 108
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMKORA90 mmSteel blue (RAL 5013)Steel blue (RAL 5013)From outside: millings; unilateral inlay as an optionQ-10, L. 1500 mm1120 / 2100 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERKORA92 mmChocolate brown (RAL 8017) Chocolate brown (RAL 8017) From outside: millingsQ-10, L. 1500 mm1100 / 2115 mm
TIMBER
KORA
29 28
ALUMINIUM
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMEUNIKA90 mmAnthracite (RAL 7016) / Red RAL 3011)Anthracite (RAL 7016) Form outside: applications made of matt and brushed stainless steel; no possibility of transparent glass; veneer as an optionQ-10, L. 1000 mm1120 / 2100 mm
Check standard and optional equipment on page 108
EUNIKA model
Available in composition
EUNIKA
30 31
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCEUNIKA82 mmBasalt grey (RAL 7012) / Golden oak (2178.001)White (RAL 9016)From outside: applications made of matt and brushed stainless steel in Golden oak colour; no possibility of transparent glassQ-10, L. 800 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBEREUNIKA92 mmPalisander Palisander From outside: applications made of matt and brushed stainless steel; no possibility of transparent glassQ-10, L. 1000 mm1100 / 2115 mm
TIMBER
PVC
EUNIKA
33 32
Model w konfiguracji standardowej
TIMBER
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERFEBA92 mmMohoganyMohoganyNo possibility of transparent glassP-10, L. 800 mm1100 / 2115 mm
Check standard and optional equipment on page 104
FEBA modelFEBA
34 35
PVC
ALUMINIUM
Check standard and optional equipment on page
Check standard and optional equipment on page
98
108
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCFEBA82 mmNut (2178.007)White (RAL 9016)No possibility of transparent glassP-10, L. 580 mm1100 / 2105 mm
ALUMINIUMFEBA90 mmSteel blue (RAL 5011)Steel blue (RAL 5011)No possibility of transparent glass; veneer as an optionP-10, L. 580 mm1120 / 2100 mm
FEBA
37 36
ALUMINIUM
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMFOTYNA90 mmGrey Silver (RAL 9007) Grey Silver (RAL 9007) From outside: applications in Winchester colour (49240); veneer as an optionP-10, L. 1200 mm1120 / 2100 mm
Check standard and optional equipment on page 108
FOTYNA model
Available in composition
FOTYNA
38 39
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCFOTYNA82 mmBasalt grey (RAL 7012)White (RAL 9016)From outside: applications in Winchester colour (49240); sandblasted glassQ-10, L. 1200 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERFOTYNA92 mmOld pineOld pineFrom outside: applications made of matt stainless steel; transparent glassQ-10, L. 1200 mm1100 / 2115 mm
TIMBER
PVC
FOTYNA
41 40
“The best evidence of successful aiming at the highest quality is elaborate
matching of details.
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMIDALIA90 mmAnthracite (RAL 7016)Anthracite (RAL 7016)From outside: millingsP-10, L. 1500 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
IDALIA modelIDALIA
44 45
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCIDALIA82 mmDark blue (RAL 5022)White (RAL 9016)From outside: millingsQ-10, L. 1500 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERIDALIA92 mmLight oakLight oakFrom outside: millingsQ-10, L. 1500 mm1100 / 2115 mm
TIMBER
PVC
IDALIA
47 46
Model w konfiguracji standardowej
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMARGEA90 mmBasalt grey (RAL 7012)Basalt grey (RAL 7012)From outside: millingsQ-10, L. 580 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
ARGEA modelARGEA
48 49
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCARGEA82 mmSilver (RAL 9006)White (RAL 9016)From outside: millingsQ-10, L. 580 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERARGEA92 mmChocolate brown (RAL 8017)Chocolate brown (RAL 8017)From outside: millingsQ-10, L. 1500 mm1100 / 2115 mm
TIMBER
PVC
ARGEA
51 50
Model w konfiguracji standardowej
TIMBER
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERALLA92 mmPalisanderPalisanderFrom outside: applications made of matt and brushed stainless steelQ-10, L. 1600 mm1100 / 2115 mm
Check standard and optional equipment on page 104
ALLA model
Available in composition
ALLA
52 53
PVC
ALUMINIUM
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCALLA82 mmSilver grey (RAL 7001)White (RAL 9016)From outside: applications made of matt and brushed stainless steelP-10, L. 1500 mm1100 / 2105 mm
Check standard and optional equipment on page 108
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMALLA90 mmMohogany Mohogany From outside: applications made of matt and brushed stainless steel; veneer as an optionQ-10, L. 1500 mm1120 / 2100 mm
ALLA
55 54
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMZOE90 mmWhite (RAL 9016)White (RAL 9016)From outside: applications in Winchester colour (49240); veneer as an optionQ-10, L. 1000 mm1120 / 2100 mm
ALUMINIUM
Check standard and optional equipment on page 108
ZOE modelZOE
56 57
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCZOE82 mmBrown (RAL 8017)White (RAL 9016)From outside: applications in Winchester colour (49240)Q-10, L. 1000 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERZOE92 mmLight oakLight oakFrom outside: applications made of matt and brushed stainless steelQ-10, L. 800 mm1100 / 2115 mm
TIMBER
PVC
Realizacja!
ZOE
59 58
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMALBA90 mmAnthracite (RAL 7016)Anthracite (RAL 7016)From outside: applications made of matt and brushed stainless steel; veneer as an optionQ-10, L. 580 mm1120 / 2100 mm
ALUMINIUM
Check standard and optional equipment on page 108
ALBA model
Available in composition
ALBA
60 61
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCALBA82 mmRuby red (RAL 3003)White (RAL 9016)From outside: applications made of matt and brushed stainless steelQ-10, L. 580 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERALBA92 mmNutNutFrom outside: applications made of matt and brushed stainless steelQ-10, L. 1000 mm1100 / 2115 mm
TIMBER
PVC
ALBA
63 62
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMDALIA90 mmFir green (RAL 6009)Fir green (RAL 6009)From outside: millings; unilateral inlay as an option; veneer as an optionQ-10, L. 1500 mm1120 / 2100 mm
ALUMINIUM
Check standard and optional equipment on page 108
DALIA modelDALIA
64 65
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCDALIA82 mmBrown (RAL 8017) White (RAL 9016)From outside: millingsP-10, L. 1500 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERDALIA92 mmChocolate brown (RAL 8017)Chocolate brown (RAL 8017)From outside: millingsQ-10, L. 800 mm1100 / 2115 mm
TIMBER
PVC
DALIA
67 66
Model w konfiguracji standardowej
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERLILLA92 mmRuby red (RAL 3003)Ruby red (RAL 3003)From outside: applications made of matt and brushed stainless steelP-10, L. 1800 mm1100 / 2115 mm
Check standard and optional equipment on page 104
TIMBER
LILLA model
Available in composition
LILLA
68 69
PVC
ALUMINIUM
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colour
Internal colourDescription
GripDimensions
PVCLILLA82 mmUltramarine colour(RAL 5002) / Dark blue (RAL 7015)White (RAL 9016)From outside: applications made of matt and brushed stainless steelQ-10, L. 1000 mm1100 / 2105 mm
Check standard and optional equipment on page 108
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMLILLA90 mmWhite (RAL 9016) / Yellow (RAL 1033)White (RAL 9016)Bilateral applications made of matt and brushed stainless steel; veneer as an optionQ-10, L. 1000 mm1120 / 2100 mm
LILLA
71 70
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMSTELLA90 mmSilver (RAL 9006) / Golden oakSilver (RAL 9006) Bilateral applications made of matt and brushed stainless steel; veneer as an optionP-10, L. 1600 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
STELLA modelSTELLA
72 73
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCSTELLA82 mmBlack (RAL 9005) / Red (RAL 3011)White (RAL 9016)From outside: applications made of matt and brushed stainless steelP-10, L. 1600 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERSTELLA92 mmPalisander Palisander From outside: applications made of matt and brushed stainless steelQ-10, L. 1500 mm1100 / 2115 mm
PVC
TIMBER
STELLA
75 74
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMTULIA90 mmAnthracite (RAL 7016)Anthracite (RAL 7016)From outside: applications made of matt and brushed stainless steel; no possibility of transparent glass; veneer as an optionQ-10, L. 580 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
TULIA model
Available in composition
TULIA
76 77
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCTULIA82 mmDark blue (RAL 7015) White (RAL 9016)Form outside: applications made of matt and brushed stainless steel; no possibility of transparent glassQ-10, L. 580 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERTULIA92 mmNutNutFrom outside: applications made of matt and brushed stainless steel; no possibility of transparent glassQ-10, L. 580 mm1100 / 2115 mm
TIMBER
PVC
TULIA
79 78
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMNOEL90 mmWhite (RAL 9016)White (RAL 9016)From outside: millings. The model is also available without millings (smooth panel) - veneer as an optionQ-10 L. 1000 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
NOEL model
Available in composition
NOEL
80 81
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCNOEL82 mmSteel blue (RAL 5011)White (RAL 9016)From outside: millingsQ-10, L. 580 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERNOEL92 mmPalisander Palisander From outside: millingsQ-10, L. 580 mm 1100 / 2115 mm
TIMBER
PVC
NOEL
83 82
Model w konfiguracji standardowej
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMZOLA90 mmAnthracite (RAL 7016)Anthracite (RAL 7016)From outside: applications made of matt and brushed stainless steel; millingsQ-10 L. 1000 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
ZOLA modelZOLA
84 85
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCZOLA82 mmWhite (RAL 9016)White (RAL 9016)From outside: applications made of matt and brushed stainless steelQ-10, L. 580 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERZOLA92 mmOld pineOld pineFrom outside: applications made of matt and brushed stainless steelQ-10, L. 580 mm1100 / 2115 mm
TIMBER
PVC
ZOLA
87 86
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMKEIRA90 mmBasalt grey (RAL 7012)Basalt grey (RAL 7012)From outside: applications made of matt and brushed stainless steel; millingsQ-10 L. 1000 mm1120 / 2100 mm
Check standard and optional equipment on page 108
ALUMINIUM
KEIRA model
Available in composition
KEIRA
88 89
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCKEIRA82 mmBlack (RAL 9005) White (RAL 9016)From outside: applications made of matt and brushed stainless steel; millingsQ-10, L. 580 mm1100 / 2105 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
TIMBERKEIRA92 mmChocolate brown (RAL 8017)Chocolate brown (RAL 8017)From outside: applications made of matt and brushed stainless steel; millingsQ-10, L. 580 mm1100 / 2115 mm
TIMBER
PVC
Grip
KEIRA
91 90
PVC
Check standard and optional equipment on page 98
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCMEVA82 mmSilver grey (RAL 7001)White (RAL 9016)From outside: millingsQ-10 L. 1800 mm1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCFELIS82 mmSlate grey (RAL 7015)White (RAL 9016)From outside: millings, Standard glassQ-10 L. 580 mm1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
PVCLUX82 mmBlack (RAL 9005)White (RAL 9016)From outside: millings, Standard glassQ-10 L. 580 mm1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionHandle
Dimensions
PVCPERLA82 mmRAL9001White (RAL 9016)Standard glassBilateral on long handle plate1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCSCALA82 mmSilver grey (RAL 7001)White (RAL 9016)From outside: millingsQ-10 L. 1800 mm1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCSAFIR82 mmMouse grey (RAL 7005)White (RAL 9016)From outside: millingsQ-10 L. 1800 mm1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionHandle
Dimensions
PVCOMBRA82 mmSilver grey (RAL 7001)White (RAL 9016)Standard glassBilateral on long handle plate1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
PVCCANIS82 mmBasalt grey (RAL 7012)White (RAL 9016)From outside: millingsQ-10 L. 1800 mm1100/2105 mm
More models
92 93
TIMBERALUMINIUM
Check standard and optional equipment on page 108
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMMEVA90 mmAnthracite grey (RAL 7016)Anthracite grey (RAL 7016)From outside: millingsQ-10 L. 1800 mm1120 / 2100 mm
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMFELIS90 mmSignal grey (RAL 7004)Signal grey (RAL 7004)From outside: millingsStandard glassQ-10 L. 580 mm1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
Description
GripDimensions
ALUMINIUMLUX90 mmBlack RAL (9005)Black RAL (9005)From outside: millingsStandard glassQ-10 L. 580 mm1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionHandle
Dimensions
ALUMINIUMPERLA90 mmRAL9001White (RAL 9016)Standard glassBilateral on long handle plate1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMSCALA90 mmSilver grey (RAL 7001)Silver grey (RAL 7001)From outside: millingsQ-10 L. 1800 mm1120 / 2100 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMSAFIR90 mmQuartz grey (RAL 7039)Quartz grey (RAL 7039)From outside: millingsQ-10 L. 1800 mm1120 / 2100 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionHandle
Dimensions
ALUMINIUMOMBRA90 mmSilver grey (RAL 7001)White (RAL 9016)Standard glassBilateral on long handle plate1100/2105 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
ALUMINIUMCANIS90 mmGrey (RAL 7040)Grey (RAL 7040)From outside: millingsQ-10 L. 1800 mm1120 / 2100 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionDimensions
TIMBERMEVA92 mmAnthracite grey (RAL 7016)Anthracite grey (RAL 7016)From outside: millings1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionDimensions
TIMBERFELIS92 mmSignal grey (RAL 7004)Signal grey (RAL 7004)From outside: millings1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionDimensions
TIMBERLUX92 mmBlack RAL (9005)Black RAL (9005)From outside: millings1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionDimensions
TIMBERSCALA92 mmSilver grey (RAL 7001)Silver grey (RAL 7001)From outside: millings1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionGrip
Dimensions
TIMBERSAFIR92 mmQuartz grey (RAL 7039)Quartz grey (RAL 7039)From outside: millingsQ-10, L. 800 mm1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionDimensions
TIMBERCANIS92 mmGrey (RAL 7040)Grey (RAL 7040)From outside: millings1100 / 2115 mm
Check standard and optional equipment on page 104
MaterialModel
ThicknessExternal colourInternal colour
DescriptionHandle
Dimensions
TIMBEROMBRA92 mmChocolate brown (RAL 8017)Chocolate brown (RAL 8017)Standard glassBilateral on long handle plate1100 / 2115 mm
MaterialModel
ThicknessExternal colourInternal colour
DescriptionHandle
Dimensions
TIMBERPERLA92 mmNut (2178.007)Nut (2178.007)Standard glassBilateral on long handle plate1100 / 2115 mm
More models
94 95
“Warmth, safety and reliability are basic
values that may be achieved by using the most innovative technology.”
98 99
Construction | PVC
82 mm
STABILITY AND PROTECTION AGAINST COLDEnergy-saving DPQ-82 profile.
Frame
PROTECTION AGAINST COLDAluminium threshold with thermal separator.
Threshold
MODERN DESIGNUnilaterally attached aluminium panel.
Panel
THERMAL INSULATIONFilled with polyurethane foam.
Sash
Due to the attachment pa-nel, the sash of the door forms the unitary surface.
CONSTRUCTION | PVC
3-GLASS PACKET
4x20x4x20x4
Ug=0,5 W/m2K 3-POINT
LOCK SYSTEM
HANDLE ON DIVIDED HANDLE PLATE WITH ROSETTE Standard colours: white or silver (depending on the door colour) Optional colours: brown, silver (F1), old gold (F4), stainless steel
SURFACE HINGEStandard colours: white Optional colours: brown, silver (F1), old gold (F4)
INSERT
STANDARD EQUIPMENT
• Two closing elements with double pin. Massive hook pin provides high level of security. Additional pin guarantees the optimal adjustment of the sash to the frame.
• Automatic closing Security without the need to close the door with key.
• Installation of the lock system along the entire height of sash.
• Fitting notch is invisible what guarantees the opened door an elegant look.
100 101
Optional equipment | PVC
Optional ’DAY AND NIGHT’ FUNCTION OF LOCK SYSTEM
This function allows the day or night door protection
option to be chosen.
HANDLE ON LONG HANDLE PLATE WITH
ROSETTE
Colours: white, silver (F1), old gold (F4), stainless
steel
GLASS
4
2/3
5
1
INSERTS
• C type insert of increased protection against
burglary (with butterfly or key)
FINGERPRINT READER
The doors opened with a fingertip provide exceptional convenience. They are completely safe, warm and reliable.
High security of the lock is confirmed by A class certificate of German VdS organization.
Convenience – opening with fingertip
Comfort – keys, codes and opening cards are unneces-sary
Economy - duplicating of keys and changing of locks are unnecessary
Security – resistance to shorting wires of scanner and other manipulations
Reliability – correct operation from -40°C to 85°C
Warranty – 24-month manufacturer’s war ranty
equipment
SELF-CLOSER
Causes automatic and controlled sash back of door
to the closed position.
EXTERNAL ROSETTES
R1 R2 R3
Colours: stainless steel Colours: white, brown, silver (F1), old gold (F4), stainless steel
GRIPS
• P-10 | Available length in mm: 580, 800, 1000, 1200,
1400, 1500, 1600, 1800 |
• Q-10 | Available length in mm: 580, 800, 1000, 1200
| 1400, 1500, 1600, 1800
1. 2B2 - safe glass with foil
2. P2 of increased anti-burglary protection
3. P4 anti-burglary glass
4. Sandblasted
5. Ornamental
6. Reflective
7. With warm-edge spacer
* Do you need different glass? Contact us via www.dako.eu - we will be delighted to help you.
102 103
Colours | PVC
Basic RAL colours
Optional colours
RAL3011
RAL9005
RAL5011
RAL9016
RAL6009
RAL8017
RAL7001
RAL9007
RAL7012
RAL9001
RAL7015
Any RAL colour
Colours PVC
RAL7016
The sample colour is for orientation and may not be used as colour pattern
Colours of applications
Golden oak Nut Winchester Inox
Available wood-like colours
Check the availability of wood-like colours on www.dako.eu.
104 105
Construction and equipment | timber
92 mm
68 mm
WARMTH AND SAFETYMaximally energy-saving DDF-92 profile or warm DDF-68 profile.
FRAME
PROTECTION AGAINST COLDMade of aluminium, with thermal insert protecting against frost.
THRESHOLD
MODERN DESIGNBilaterally attached timber panel.
Panel
THERMAL INSULATIONFilled with insulating foam
SASH
Due to the panel construc-tion, the sash of the door forms the unitary surface - both from the inside and the outside.
CONSTRUCTION | TIMBER
SPACIES OF TIMBERSolid Meranti
4-GLASS PACKET
92 mm: 4-GLASS PACKET4x18x4x18x4x18x4
68 mm: 3-GLASS PACKET4x16x4x18x4
92mm/68 mm AUTOMATIC LOCK SYSTEM Z-TF
HANDLE ON LONG HANDLE PLATEStandard colours: brown Optional colours: white, silver (F1), old gold (F4)
SURFACE HINGEStandard colours: brown Optional colours: white, silver (F1), old gold (F4)
INSERT
STANDARD EQUIPMENT
• Six closing elements
The door security is guaranteed by the multipoint lock system that provides the adjustment of the sash to the frame.
• Instalation of the lock system along the entire height of sash.
The invisible fitting notch provides the elegant appearance of the opened door.
Optional equimpent | timber Colours | timber
Optional equipment
HANDLE ON DIVIDED HANDLE PLATE WITH
ROSETTE
• Colours: white, silver (F1), old gold (F4), stainless steel
4
2/3
5
1
INSERTS
• C type insert of increased protection against
burglary (with butterfly or key)
SELF-CLOSER
• Causes automatic and controlled sash back of door to the closed position.
Colours | TIMBER
White
Chocolate brown (RAL 8017)
Nut
Mohogany
Palisander
Teak
Brown
Light oak Old pine
Covering coloursmeranti
Basic RAL coloursmeranti
Optional colours
Any RAL colour
The sample colour is for orientation and may not be used as colour pattern. Sash colour may slightly differ from frame or fixed construction colour. It results from products specifics, the sash is fornired and the frame is made of layered solid timber. The resulted colour difference is no under guarantee.
GRIP
• P-10 | Available length in mm: 580, 800, 1000, 1200,
1400, 1500, 1600, 1800 |
• Q-10 | Available length in mm: 580, 800, 1000, 1200
| 1400, 1500, 1600, 1800
106 107
1. 2B2 - safe glass with foil
2. P2 of increased anti-burglary protection
3. P4 anti-burglary glass
4. Sandblasted
5. Ornamental
6. Reflective
7. With warm-edge spacer
* Do you need different glass? Contact us via www.dako.eu - we will be delighted to help you.
108 109
Construction and equipment | aluminium
90 mm
77 mm
WARMTH AND SAFETYMaximally energy-savingl DA-90 profile or warml DA-77 profile.
Frame
OCHRONA PRZED CHŁODEMAluminium threshold with thermal insert 20 mm high (DA-77 system) and 32 mm high (DA-90 system). It is possible to select threshold broadening.
Threshold
MODERN DESIGNBilaterally attached aluminium panel.
Panel
THERMAL INSULATIONInsulating polyurethane foam 85 mm thick (DA-90 system) or 72 mm thick (DA-77 system).
Sash
Due to the bilaterally attached construction, the sash of the doorforms the unitary surface - both from the inside and theoutside.
CONSTRUCTION | ALUMINIUM
3-POINT LOCK SYSTEM
HANDLES ON DIVIDED HANDLE PLATE WITH ROSETTEStandard colours: silver (F1) Optional colours: brown, silver (F1), old gold (F4), stainless steel
INSERT with butterfly
STANDARD EQUIPMENT
SURFACE HINGEStandard colours: silver (F1) Optional colours: white, brown, colour of joinery
3-GLASS PACKET 6x22x4x22x4 (DA-77 system)
4-GLASS PACKET 6x20x4x20x4x20x4 (DA-90 system)
• Two closing elements with double pin. Massive hook pin provides high level of security. Additional pin guarantees the optimal adjustment of the sash to the frame.
• Automatic closing Security without the need to close the door with key.
• Installation of the lock system along the entire height of sash. The invisible fitting notch provides the elegant appearance of the open door.
110 111
Optional equipment | aluminium
Optional ‘DAY AND NIGHT’ FUNCTION OF LOCK SYSTEM
This function allows the day or night door protection option
to be chosen.
HANDLES
GRIPS
• P-10 | Available length in mm: 580, 800, 1000, 1200,
1400, 1500, 1600, 1800 |
• Q-10 | Available length in mm: 580, 800, 1000, 1200
| 1400, 1500, 1600, 1800
42/3
5
1
on divided handle plate
on handle plate
Colours:
silver (F1)
old gold (F4)
stainless steel
RAL colour
brown
EXTERNAL ROSETTES
INSERTS
• C type insert of increased protection against burglary
(with butterfly or key)
SELF-CLOSER• Causes automatic and controlled sash back of door to the
closed position.
equipment
R1 R2 R3
Colours: stainless steel Colours: white, brown, silver (F1), old gold (F4), stainless steel
INVISIBLE HINGES
When the sash is closed the hinges are invisible what gives the
windows exceptionally elegant appearance and facilitates ke-
eping it clean.
A great advantage of the fittings is an easy regulation without
using the tools.
white
6
FINGERPRINT READER
The doors opened with a fingertip provide exceptional
convenience. They are completely safe, warm and reliable.
Convenience – opening with fingertipComfort – keys, codes and opening cards are unnecessaryEconomy - duplicating of keys and changing of locks are unne-cessary Security – resistance to shorting wires of scanner and other manipulationsReliability – correct operation from -40°C to 85°CWarranty – 24-month manufacturer’s war ranty
1. 2B2 - safe glass with foil
2. P2 of increased anti-burglary protection
3. P4 anti-burglary glass
4. Sandblasted
5. Ornamental
6. Reflective
7. With warm-edge spacer
* Do you need different glass? Contact us via www.dako.eu - we will be delighted to help you.
112 113
Colours | aluminium
Colours aluminium
Optional colours
Any RAL colour
Basic RAL colours
RAL3011
RAL9005
RAL5011
RAL9016
RAL6009
RAL8017
RAL7001
RAL9007
RAL7012
RAL9001
RAL7015 RAL7016
Veneer
Creamy white Brown Antique oak Macore Sienna noce Nuanced daglesia
Mountain pine Reddish brown Green Brushed aluminium
Agate grey Silver grey
Smooth silver grey
Golden oak Mohogany Marsh oak TabascoNut Winchester
The sample colour is for orientation and may not be used as colour pattern.
Colours | aluminium
DREAMSNEED AN IDEA...
THE EXEMPLARY COMPOSITIONS OF HarmonyLine
That is why we created HarmonyLine - the idea whereby your dream of a beautiful home becomes a reality.
Visit our website and download
HarmonyLine folder www.dako.eu
HarmonyLine is a unique idea of a common design of windows, doors, garage doors and roller blinds. This idea allows our clients to find a solution matching the individual character of the building.
1A
EUNIKA COMPOSITION
TAIDA COMPOSITION
4A
NILA COMPOSITION
7A
LILLA COMPOSITION
DEFINITE STEPS MAKE IDEA S ALIVE. . . Therefore, we designed 12 COMPLETE CARPENTRY SETS of HarmonyLine, in popular configurations and dimensions.
12 ready-made compositions prepared by DAKO designers.5 colour variations of each set. 3 materials: PVC, ALUMINIUM, TIMBER.
10A
114 115
116 117
Quality Innovations Advanced technology International presence
ExperienceProfessional network of Trading Partners
Continuous innovations since 1994
DAKO is characterised by a history of innovations that aims at understanding the needs of its customers and meeting their expectations.
The company’s growing success can be attributed to its continually modernized production process, advanced tech-nology, and continuous adaptation to changing customer requirements. DAKO improves its employee competencies, continuously invests in company development and success-fully expands into new markets.
The company has sold millions of windows worldwide and bo-asts a record of strong customer satisfaction.
We currently serve the following countries:
Poland, Germany, Italy, Norway, Sweden, France, Belgium, the Czech Republic, Slovakia, Luxembourg, Spain, Israel, Tu-nisia, Mexico, Japan, and many others.
ITA
LY
N
OR W AY
FR
AN
CE
M
EX IC
O
5050 % of production on export
G
E R M A N Y
BE L G I U M
Every single day around the world...thousands of people test DAKO products in the most demanding testing ground – the laboratory of the real life. DAKO products are used, among others, by people of modern and exotic Japan or living in historical capitals of Europe as well as cold, far north and hot regions of Southern America.
J
APA N
118 119
Worldwide
Looking for the harmony, we are constantly moving between the entirety and its elements. This entirety is determined by its elements and these become important it the light of the entirety. The perception of details depends on the right balance: the relations between colours determine balance, and sometimes the modification of even the smallest detail may change the outlook of the whole composition.
The end of this journey is marked by ourselves - we close the process and make the final decision.“
Osamu Ono
Find out more:All the information concerning our offer, DAKO quality policy, sale network as well as the gallery of implementations and information materials you can find on our website www.dako.eu
DAK
O/
EN /
01/
08
.02.
2017
WINDOWS | DOORS | ROLLER BLINDS | GARAGE DOORSPVC | TIMBER | ALUMINIUMwww.dako.eu
top related