fluke_6070a_6071a_ops (1)

The Fluke Corporation is pleased to hereby grant GIDEP(Government-Industry Data Exchange Program) permission to reproducethe manuals listed in the attachment. Permission is granted on thecondition that you legibly reproduce on the copies the legend "ReproducedWith Permission".

It is our understanding from your request dated January 23, 2001,that the purpose for copying these manuals is to include them in the GIDEPdatabase, and that the material won't be copied for any other purpose.

Thank you for your cooperation, and for your interest in Fluke.

Sincerely,

Beverly A. SummersParalegalFluke CorporationIntellectual Property Law Dept.Direct: (425) 446-5770 [voice] (425) 446-5117 [fax]beverly.summers@fluke.com [e-mail]

Section 1 lntrodu,ction and Specifications

l-1. THE 6070A/6071A INSTRUCTION MANUAL SET 1-2. The John Fluke Models 6070A and 6071A RF Synthesized Signal Generators are documentated by a set of four manuals: the 6070A/6071A Operator Manual, the 6070A/6071A Calibration Manual, the 6070A/6071A Service Manual, and the 6070A/6071A Schematic Manual (Figure 1-l): The 6070A/6071A Operator Manual introduces the operator to the instrument; familiarizes the operator with all instrument controls, connectors, and indicators; and presenis detailed operating information and procedures for both manual (local) and systems (remote) operation. The 6070A/6071A Calibration Manual provides procedures for general maintenance, performance checks, and calibration adjustments. The 6070A/6071A Service Manual contains a description of the theory of operation, troubleshooting procedures, and a list of replaceable parts. The 6070A/6071A Schematic Manual contains schematic digra.ms, wire lists, interconnects diagrams, and an overall basic block diagram of the instrument.

l-3. The major difference between the two models is that the 6071A has twice the upper frequency limit of the 6070A. Because of their similarity, most ofthe text in this manual will apply to both models. Text that applies to just the 6070A ‘or just the 6071A will be identified as such.

I

B070A/6071A

Calibration MZlUd

6070A/6071A

6070AI6071 A

operator MalllId

6010A/6071A

Figure l-l. 8070AlMl7iA hwlructlon MfGwal Set