fmc flowline products and services catalog
Post on 08-Feb-2018
487 Views
Preview:
TRANSCRIPT
-
7/22/2019 FMC Flowline Products and Services Catalog
1/74
-
7/22/2019 FMC Flowline Products and Services Catalog
2/74
Contents
Introduction I1
WecoPlug Valves PV1
WecoCheck Valves CV1
WecoButterfly Valves and Actuators BV1
Original ChiksanSwivel Joints SJ1
Original WecoWing Unions WU1
WecoFittings and Pup Joints FP1
Integrated Services IS1Chiksanand WecoSpecifications S1
-
7/22/2019 FMC Flowline Products and Services Catalog
3/74
I1
FMC Technologies is the worlds leading supplier of flowlineproducts and services to the oilfield industry and is the standard
against which all others are measured. From the original Chiksan
and Wecoproducts to the revolutionary equipment designs and
integrated services of today, FMCs fluid control family of
products and services enables customers to achieve maximum life
and value from their flowline systems throughout a complete
range of applications.
The success of FMCs fluid control technology stems from astrong tradition of anticipating and responding to customer needs
in every way possible. By focusing on the delivery of top products
and services, FMC Technologies is helping its customers face
tomorrows technical and economic challenges today.
Flowline Products and Services
-
7/22/2019 FMC Flowline Products and Services Catalog
4/74
I2
Experienced, Knowledgeable,Productive PeopleFMCs global fluid control team is structured around topflowline professionals individuals who understand yourbusiness and are dedicated to meeting your needs. Themanagement, engineering, and sales support staf f areamong the most experienced in the oil and gas industry.Their knowledge and industry expertise show up in thequality of products and services delivered to you.
Health, Safety & EnvironmentAs a leading oilfield equipment and services provider,FMC Technologies stresses overall health, safety, andenvironment (HSE) in all of its operations and processes.With a proven record of outstanding HSE performance,FMC is a strong advocate of HSE training that goesbeyond the basic legal requirements. The goal is to ensurethat all field and office personnel are competent to carryout HSE critical duties, having received the appropriatetraining required by law, company policy, and clients.HSE policy covers all key elements of the business,including company safety policy statements, product
safety, risk assessment, monitoring, auditing, and review.
Manufacturing LeaderFMCs fluid control manufacturing facility is located inStephenville, Texas. The plant was constructed in 1980and expanded in 1984, 1987, and 1996. The facility
occupies a 44-acre site and comprises 220,000 squarefeet of manufacturing capacity and 48,000 square feet
of customer service, production support, and engineeringoffices. It utilizes the latest in computer numericalcontrolled (CNC) machining centers, productionplanning systems, computer aided design/computer aidedmanufacturing (CAD/CAM) systems, and the latesttechnology in order and distribution operating systems.The Stephenville facility produces a wide range of flowlineequipment for distribution worldwide.
Flowline Products and Services
-
7/22/2019 FMC Flowline Products and Services Catalog
5/74
-
7/22/2019 FMC Flowline Products and Services Catalog
6/74
WecoPlug Valves
PV1
Ultimate sealability, noadjustments requiredFloating plug improves sealabilityand reduces plug wear.
Weco ULT and DR plug valves are premium, quarter-turn valves designed for
a wide range of standard and sour gas drilling, production, and well-servicingapplications. These rugged valves are offered in single and dual-body designs inpressures to 20,000 psi. They range in size from 1 to 4-inches and come withthreaded, Weco wing union, flanged, and clamp hub ends. Consult factory forconfigurations. Like all pressure containing products, Weco plug valves requirespecial handling (see inside back cover for Warnings and Cautions).
Body erosion virtuallyeliminatedFluid is forced between theplug/seal interface, limitingwear to replaceable parts.Choice of operators,
actuatorsGear operators, pneumaticactuators, and hydraulicactuators are available.
Low torque operationat all pressuresCylindrical plug fits between sealand side segments, reducing plugdrag on the valve body.
-
7/22/2019 FMC Flowline Products and Services Catalog
7/74
PV2
WecoPlug Valves
ULT Plug Valves
O P E R A T I N G P R I N C I P A L
Top view Valve open
Line fluid
Top view Valve closed
Floating plug Proprietaryseal design
Floating plug Proprietaryseal design
The benefits of FMCs ULT plug valves are a direct resultof its unique design features. Combined, these features haveredefined the standards for plug valve operating principles andperformance.
Ultimate SealabilityThe key to the ULT plug valves unprecedented seal integrityis its proprietary floating plug and dual-seal design. When the
valve is closed, the dual segment seal provides a redundant sealon the downstream side of the valve. In 3-inch and larger sizes,the ULT plug valve also employs a two-piece plug and stemdesign. When these valves are closed, line fluid pressure in thebody is equalized around the plug resulting in ultimate sealingand low operating torque.
Ultimate Valve Body LifeIn addition to improved bi-directional seal performance, theULT plug valve dramatically extends service life. When atraditional plug valve is closed, high-pressure fluids are forcedbetween the upstream body and seal segment interface. Thisflow path can erode the valve body, potentially ruining thevalve. When a ULT plug valve is closed, the only available flowpath is between the seal segment and plug interface. This flowpath eliminates body erosion and limits any potential wear toreplaceable components.
Ultimate Seal LifeIn addition to improved valve body life, two other frequentoperating problems associated with high-pressure plug valves both of which cause premature damage to seals and increasedvalve operating torque are solved by the ULT plug valve.Traditional plug valve designs can sometimes seal on theupstream side of the valve, resulting in extrusion damage to theupstream segment seal. Traditional plug valves can also trapbody pressure after line pressure is removed from the valve,resulting in extrusion damage to both upstream and down-stream segment seals. The dual-seal design of the ULT plugvalve, by forcing flow between the plug and segment interface,eliminates both of these problems.
Ultimate Life Cycle Cost SavingsSuperior sealability, increased life of valve body, and elimi-nation of premature seal damage result in significant savingsin life cycle costs of the ULT plug valve over traditional plugvalves. Qualification tests have proven that the ULT plug valve
extends service life 3 to 5 times over other plug valves whilereducing maintenance costs. In smaller sizes, ULT parts kitsmay be used in existing DR plug valve bodies to extend the lifeof these valves.
-
7/22/2019 FMC Flowline Products and Services Catalog
8/74
PV3
See specifications tables (pages PV1A and PV2A) for sizes, dimensions, weights, materials, and part numbers.
WecoPlug Valves
ULT Plug Valves(below 3-inch)Up to 20,000 psi cold working pressure
Recommended serviceSlick water, sand, proppant/gel, and cement
ULT Plug Valves(3-inch and larger)Up to 20,000 psi cold working pressure
Recommended serviceSlick water, sand, proppant/gel, and cement
Handles sand, proppant, and cement
Linear wave springs prevent small particles fromentering metal-to-metal seal area, enabling usein a broad range of applications.
Interchangeable designInternal components interchange withWeco DR valve components, potentiallyextending the life of those valve bodies.
Eliminates corrosion in segment sealing areaDual segment seals greatly reduce erosive fluid flowbetween the seal segments and the plug valve body toimprove sealing capabilities and extend service life.
Fast, simple field repairBottom entry design provides accessto all valve internals without having toremove the operator or actuator.
Eliminates body washout, extends body lifeDual seals direct flow between the seal segment andplug to provide long, trouble-free service life.
Two-piece floating plug/stemProprietary floating plug and stemuniformly distribute load againstthe downstream seat to improvesealability and reduce plug wear.
Eliminates body washout,extends body lifeDual seals direct flow between theseal segment and plug to providelong, trouble-free service life.
Fast assemblyIntegral stem and plug provide fast,sure assembly without adjustments.
-
7/22/2019 FMC Flowline Products and Services Catalog
9/74
PV4
See Specifications Tables (page PV1A) for sizes, dimensions, weights, materials, and part numbers.
WecoPlug Valves
Specialty ULT Plug Valves
ULT Dual Body Plug Valves(Weco Union x Flanged End Connections)
ULT Flanged Plug Valves(Flanged End Connections)
ULT Dual BodyPlug Valves(Drill Pipe Connections)
The ULT plug valves proven, proprietary design technology enablescustomers to take advantage of a wide range of configurations for ahost of specialty applications. Options include single and dual bodydesigns; drill pipe, Weco union, or flanged end connections; and sideoutlets. Consult factory for specific applications.
-
7/22/2019 FMC Flowline Products and Services Catalog
10/74
Weco
Check Valves
CV1
Replaceable seatStainless steel seat isreplaceable, reducing theneed to scrap body.
Weco check valves are used to isolate well-servicing equipment from high-pressure treating fluids during fracturing applications. Offered in three primarymodels, these rugged valves seal against a complete range of well-servicingfluids at pressures to 20,000 psi. Valves are available in 1-1/2 to 4-inch boresizes for standard and reverse flow. Sour gas models available. Consult factoryfor configurations. Like all pressure containing products, Weco check valves
require special handling (see inside back cover for Warnings and Cautions).
Open flow pathFlapper dynamics provideoptimum flow through the valveand low flow differential.
Fast, easy serviceTop-entry design andremovable flapper assemblymake repair fast and easy.Recommended service
High-pressure well-servicing lines, fracturinglines, testing lines, cementing and circulatinglines, and other well service and stimulationapplications
Forged designForged body, unique flow dynamics,advanced erosion characteristics,and abrasion-resistant componentscombine for long service life.
Top-Entry Check Valves
Abrasion resistant flapperCarboxylated nitrile flapper faceis abrasion resistant against acomplete range of well fluids.
ACME thread capCoarse, ACME thread capcan be easily removedwithout having to remove thevalve from the line.
See specifications tables (pages CV1A and CV2A) for sizes, dimensions, weights, materials, and part numbers.
-
7/22/2019 FMC Flowline Products and Services Catalog
11/74
CV2
Weco
Check Valves
Dart Check Valves
Minimizes explosivedecompressionExplosive decompressionresistant materials anddesign for long service life.
Easy, low-cost serviceMain seal is located on seat,reducing exposure to flow.Enables seal to be replacedwithout replacing seat or dart.
Low-inertia dart designHollow dart and fixed stemminimize pressure required tostart flow. Non-metallicbushing reduces friction,increasing dart and stem life.
Recommended serviceExtreme nitrogen and carbondioxide services; wet or drynon-erosive flow
N2and CO2capabilityStainless steel internalcomponents and specialelastomer seal handle gasvelocities in excess of250 feet/second.
Flapper Check Valves
Replaceable seatSeparate seat/body designensures the seat can bereplaced as needed.
Open flow pathFlapper dynamics provideoptimum flow through the valveand low flow differential.
Recommended serviceSlick water, sand, proppant/gel, andcement services
Abrasion resistant flapperCarboxylated nitrile flapper faceis abrasion resistant against acomplete range of well fluids.
See specifications tables (pages CV1A and CV2A) for sizes, dimensions, weights, materials, and part numbers.
-
7/22/2019 FMC Flowline Products and Services Catalog
12/74
WecoButterfly Valves and Actuators
BV1
Choice of operators, actuatorsAll Weco butterfly valve models canbe equipped with a wide range ofoperators and actuators.
Weco butterfly valves offer the ultimate in dependable, economical flow control.These field-proven valves are available from stock in 2 through 24-inch sizes andcan handle working pressures up to 175 psi. For pressure ratings from 176 psi upto 285 psi, consult factory. Wafer, notched, and lug-type body styles meetrequirements for new or existing flowline systems. Using a variety of materials,valve bodies, discs, stems, and seats can be individually matched to specificoperating conditions, including temperature range, type and concentration offluid, and various flow conditions. All materials meet ASTM and AISI standards.
Outstanding flow efficiencyStreamlined disc design minimizesturbulence and pressure drop forgreater flow efficiency.
Leak-proof installationRibbed seat face eliminates theneed for flange gaskets andensures leak-proof installation.
Fast, simple field repairIf a valve should need repair, itcan be completely reconditionedin the field using interchangeablestock parts.
-
7/22/2019 FMC Flowline Products and Services Catalog
13/74
WecoButterfly Valves and Actuators
Triple seal designAn O-ring, unders ized stem holesin the seat, and correspondingflats on seat and disc hubs providethree completely independentseals. This unique feature isolatesboth the upper and lower stemsfrom line fluid, allowing use ofstandard stem material.
Elastomer seatAn elastomer seat with two-piece,hard phenolic back-up eliminatesseat walking and allows the seatto expand under pressure, makingthe valve body the pressure con-taining component.
Self-centering discDual stem with upper and lowertangential pins allows a self-centering disc. This designprovides equal sealing pressure360 around the disc, ensuringpositive shut off and extendingservice life.
No in-line pins, screws or boltsHex drive provides positive discmovement without in-line pins, screws,or bolts.
Valve Part
Seat & O-ring
Body
Stem (upper & lower)
Disc
Spirol/Retainer Pins
Standard Material
Nitrile (Buna N)(-20F to 200F)
Ductile Iron
410 Stainless Steel
Ductile Iron
302 Stainless Steel
Optional Materials
Hypalon, Teflon, Viton,EPDM, Red Natural Rubber
Aluminum, Steel, Stainless Stee l
316 Stainless Steel
Aluminum Bronze, 316 StainlessSteel, Ryton, Kynar, Halar, Teflon
Coated, Nickel Plated, Hastelloy
Standard Materials of Construction
Other materials of construction available. Consult factory.
BV2
-
7/22/2019 FMC Flowline Products and Services Catalog
14/74
BV3
See specifications tables (pages BV1A to BV3A) for sizes, dimensions, weights, materials, and part numbers.
WecoButterfly Valves and Actuators
Model 22LLong neck, lug body, 175 psi cold workingpressure, 2 to 24-inch sizes
Recommended serviceGeneral on/off and throttling servicesfrom 1mm Hg absolute vacuum to fullworking pressure
Features Tapped lugs allow independent
upstream or downstream bolting to125 or 150 lb ANSI flanges
Long neck allows for pipe insulation
Model 22Long neck, wafer body; 175 psi cold work-ing pressure, 2 to 12-inch sizes
Recommended serviceGeneral on/off and throttlingservices from 1mm Hg absolutevacuum to full working pressure
Features Valves are self-centering and
mount between 125 or 150 lbANSI flanges
Long neck allows for pipe insulation
Model 12NShort neck, notched body; 175 psi coldworking pressure, 2 to 6-inch sizes
Recommended serviceGeneral on/off and throttling servicesfrom 1mm Hg absolute vacuum to fullworking pressure
Features Valves are notched to fit between
lightweight flanges
Model 12Short neck, wafer body; 175 psi coldworking pressure, 2 to 12-inch sizes;150 psi cold working pressure, 14 and16-inch sizes
Recommended serviceGeneral on/off and throttling servicesfrom 1mm Hg absolute vacuum to fullworking pressure
Features Valves are self-centering and
mount between 125 or 150 lbANSI flanges
-
7/22/2019 FMC Flowline Products and Services Catalog
15/74
BV4
See specifications tables (pages BV4A to BV10A) for sizes, dimensions, weights, materials, and part numbers.
WecoButterfly Valves and Actuators
Operators & ActuatorsVane ActuatorQuarter-turn, double acting actuator;2 through 6-inch valve sizes
Recommended serviceCompact, pneumatic actuator for on/offvalve operation
Features The only moving part, the vane, is
cast integral to the shaft for sturdiness;does not require field lubrication
Fully repairable in-line Mounts directly to valve in any quadrant
Standard Handle2 through 12-inch valve sizesRecommended serviceRecommended for 8-inch valves and larger
Features Positive-stop gripper with integral locking lug ensures
full open/full closed operation Model 12 and 12N valves have a detent p late which
bolts on the valve body in each of four quadrants;Model 22 and 22L valve have a pre-notched topflange with on/off detent positions
Throttling Handle2 through 12-inch valve sizes
Recommended serviceRecommended for 8-inch valves and larger
Features Notched detent plate and positive-stop gripper with
integral locking lug ensures positive locking in any of10 positions from full open or full closed operation
Detent plate bolts on the valve body in each of thefour quadrants
Gear OperatorsWeatherproof, worm gear operator;2 through 24-inch valve sizes
Recommended serviceManual on/off or throttling services
Features Operator has 90 travel arc with
internal travel stop screws for aplus or minus 20 adjustment ateither end of the travel
Mounts on the valve in anyquadrant
Chain wheel attachment available Hand-wheel shaft extensions
available
Pneumatic ActuatorsDouble-acting or fail-safe spring
return; 2 through 12-inch valve sizes
Recommended servicePneumatic actuator foron/off valve operation
Features Mounts directly to Weco
butterfly valves withoutspecial adapters ormounting hardware
Full 90 operation with aminimum of 30 psi air, noadjustments required
All models and sizes of Weco butterfly valves can beequipped with Weco operators or actuators as wellas other brands of actuators. Typical options includestandard and throttling handles, gear operators,chain-wheel operators, vane actuators, pneumaticactuators, special controllers, and positioners.
-
7/22/2019 FMC Flowline Products and Services Catalog
16/74
Original ChiksanSwivel Joints
SJ1
Streamlined bore minimizes
flow restrictionsSmooth, round bore designminimizes turbulence andpressure drop. LongsweepandTripleStep swivel joints haveextra-long radius elbows thatoptimize flow characteristics andextend life in the ball race areaswhen handling abrasives atextremely high pressures.
Chiksan swivel joints deliver significantly longer life, superior performance, andreduced maintenance. Designed for standard and sour gas services, these worldproven fittings come in 3/8 to 12-inch sizes and can handle pressures from vacuumto 20,000 psi. Many different Chiksan assembly configurations are available. Thesestyles can be combined in an unlimited variety of ways to suit practically anyinstallation. Available end connections are threaded, integral Wecowing union,beveled for welding, or flanged. Like all pressure containing products, Chiksanswivels require special handling (see inside back cover for Warnings and Cautions).
Proven packing designIndustry leading packing design integrates ananti-extrusion ring that serves as a retainer andbearing to reduce friction between the resilientpacking material and the packing chamberas the joint is rotated.
Bearings key torotation, strengthTo assure long, dependableservice, Chiksan dual andtri-race ball bearing swivels
are designed to meet or exceedload capacities and serviceconditions. All ball races areeither flame hardened,carburized and hardened, orhave snap-in stainless steelball races.
Field repairableIf packing, bearings, or ballplugs should need replacing,
easy-to-use field repair kits areavailable.
-
7/22/2019 FMC Flowline Products and Services Catalog
17/74
-
7/22/2019 FMC Flowline Products and Services Catalog
18/74
SJ3
Original ChiksanSwivel Joints
Instream packing for longseal lifeWorld proven instream packingtechnology provides unsurpassedsealability and reliability in theharshest oilfield conditions. Anintegral anti-extrusion ring servesas a retainer and bearing to reducefriction between the resilientpacking material and the packing
chamber as the joint is rotated.
Eliminates routine maintenanceAn improved environmental seal reduces thepotential for corrosion in the ball race area. Theintegrity of the seal and the use of a high-performance grease during initial assembly
virtually eliminates the need for periodic greasing.
Advanced material selectionThe TripleStep swivel joint is manufactured from forged alloysteel with a closely controlled, proprietary chemicalcomposition and heat treatment to ensure superiortoughness, ductility, case depth, case hardness, and corestrength.
Unmatched erosion allowanceAn exclusive three step design coupled
with patented bearing race geometryadds significant wall thickness under themale races without increasing swivel jointsize or weight.
Exclusive design deliverslonger life, lower costTripleStep swivel joints deliverthe highest bending and axial
load capacities in the industry.They also eliminate rejectionsfrom excessive wear in the ballrace area as well as swivelseizures due to corrosion andbrinnelling of the ball races.
TripleStep Swivel Joints
Competitive Hype VS. Proof PositiveDesigned especially for abrasive, high-pressure well servicing applications,TripleStep swivel joints have been proven against competitive swivels incustomer-witnessed flow loop tests and field applications. The uniquethree step bal l race design provides significantly greater erosion allowance
without increasing swivel joint size or weight. The result: TripleStepswivel joints deliver increased life, superior performance, and reducedmaintenance...lasting 2-1/2 to 5 times longer than competitive swivels.
Thicker Where it CountsCompetitive swivels wear out first in the ball races, meaning they mustbe disassembled for inspection. TripleStep swivels wear in the elbows,meaning they can be inspected and returned to service withoutdisassembly. The TripleStep design places more material under the maleball race a location that computational flow dynamics analysis and fieldtesting shows to be a high erosion area.
32.3
165.4
59.0
159.2
50.7
247.5
92.5
240.0
Test 1 Test 2 Test 3 Test 4
Competitive Swivels FMC Swivels
HourstoMinimumWearAllowance
Accelerated Wear Test(40ft/sec. with 6 ppa 20/40northern sand)
-
7/22/2019 FMC Flowline Products and Services Catalog
19/74
SJ4
See specifications tables (pages SJ1A to SJ8A) for sizes, dimensions, weights, materials, and part numbers.
Original ChiksanSwivel Joints
Low-PressureSwivel Joints175 psi to 1,000 psi cold working pressure;3/4 to 12-inch sizes
Recommended serviceTransfer lines, temporary flow lines, discharge lines, auxiliaryflow lines, water lines, and other general-service oilfieldapplications
HP (High-Pressure)Swivel Joints6,000 psi cold working pressure; 3/8 to 4-inch sizes
Recommended serviceHydraulic control lines, mud lines, rotary line connections, BOP lines,test lines, water lines, offshore wellhead connections, cementing andcirculating hoses, and choke-and-kill lines
XHP (Extra High-
Pressure) SwivelJoints10,000 psi cold working pressure; 2-inch size
Recommended serviceHydraulic control lines, mud lines, rotary line connections,BOP lines, test lines, water lines, offshore wellhead connections,cementing and circulating hoses, and choke-and-kill lines
TSi (TripleStep)Swivel Joints10,000 psi cold working pressure;3 and 4-inch sizes
15,000 psi cold working pressure; 3-inch size
For Longsweep swivels and sizes orpressures not shown, consult factory.
Recommended serviceLong-radius elbows designed especially for high-pressure abrasiveapplications such as fracturing, choke-and-kill lines, cementing andcirculating hoses, acidizing, and test lines
-
7/22/2019 FMC Flowline Products and Services Catalog
20/74
SJ5
Original ChiksanSwivel Joints
Chiksan Sour Gas Swivel Joint
Snap-in ball racesSnap-in ball races providehard bearing surface to deliverextra strength and high load-bearing capacity whenhandling sour gas. Proven packing design
Elastomeric packing with stainless steelanti-extrusion ring and secondary O-ringseal are used to isolate the races andbearings from line fluid.
Controlled hardness
Swivel components are speciallyheat-treated and 100% tested forcontrolled hardness.
Positive identification
Chiksan swivels for sour gas service arestamped Sour Gas and painted withan olive green, zinc-chromate primer toensure quick, positive identification.
Leak detectionA leak detection port betweenthe packing and O-ring sealsignals the need for packingreplacement.
Sour Gas ServiceFMC Technologies manufactures Chiksan sour gas swivel jointsin accordance with the National Association of CorrosionEngineers (NACE) Standard MR-01-75 and the AmericanPetroleum Institutes (API) Standard RP-14-E. These swivel
joints are specia lly heat-treated and inspected for controlledhardness. Because the specially heat-treated steel required forsour gas does not provide a hard enough bearing surface,Chiksan sour gas swivel joints use snap-in ball races for extrastrength and high load-bearing capacity. Sour gas swivel joints
come standard with integral Weco wing union end connections.They also have a leak-detection port between the packing and theO-ring seal. If leakage past the packing should occur, it is forcedthrough the port, signaling the need for packing replacement.For positive identification, all Chiksan sour gas swivel joints arestamped Sour Gas or NACE MR-01-75 using low-stress dotstamping and painted with an olive green, zinc-chromate primerthat is unique to sour gas equipment.
Chiksan Swivel Joints forSour Gas Service
High-Pressure Swivel Joints
6,000 psi cold working pressure, 2 and 3-inch sizes;Weco wing union end connections
Longsweep Swivel Joints
7,500 psi cold working pressure, 3-inch size;Weco wing union end connections
10,000 psi cold working pressure, 1, 2, 3, and 4-inch sizes;Weco wing union end connections
15,000 psi cold working pressure, 2 and 3-inch sizes;Weco wing union end connections
-
7/22/2019 FMC Flowline Products and Services Catalog
21/74
SJ6
See specifications tables (pages SJ1A to SJ8A ) for sizes, dimensions, weights, materials, and part numbers
Original ChiksanSwivel Joints
Chiksan Swivel Joint StylesChiksan swivel joints are available from stock in nine basic stylesor configurations. These styles permit 360-degree rotation andmovement in one, two, or three planes. They can be combined inan unlimited variety of ways to suit practically any installation.
All Chiksan swivel joints a re assembled using two or morestandard pieces.
Although Chiksan swivel joints can be rotated while underfluid pressure, they are not recommended for services requiringcontinuous rotary motion. See inside back cover for additional
Warnings and Cautions.
Style 50
Style 40Style 20
Style 60
Style 10Style 80
Style 70
Style 30
Style 100
-
7/22/2019 FMC Flowline Products and Services Catalog
22/74
ChiksanSwivel Joints
SJ7
Consult factory for special coiled tubing applications.
Chiksan Cementing andCirculating HosesChiksan cementing and circulating hoses can handle a completerange of standard and sour gas fluids at cold working pressures upto 15,000 psi. These rugged, all-steel hoses are available in 1 to3-inch sizes and configurations to meet virtually any need. Allmaterials meet ASTM or AISI standards.
Recommended service
High-pressure discharge lines, water lines, temporary flow lines, welltesting lines, cementing and circulating lines, and other high-pressureapplications
Features All designs feature Chiksan swivel joints which provide flexibility,
absorb shock and vibration, and maximize flow characteristics Weco wing union connections ensure fast, pressure-tight make-up
and break-out without threading, welding, or special connections Chiksan hoses fold up easily and quickly for transportation and
storage Designs are available for sour gas services at cold working pressures
up to 15,000 psi
Chiksan Coiled Tubing Reel Swivel15,000 psi cold working pressure; 2 and 3-inch sizes
Recommended serviceHigh-pressure coiled tubing applications
Fast, easy field maintenanceThe swivel internal components can beserviced from the front without removingthe housing from the coiled tubing unit.
Converts for sour gas serviceBy changing out the Weco wing union subs,the assembly is converted to a sour gasswivel. This exclusive feature reducesinventory and lowers costs.
Stepped bearing racesExclusive stepped bearing race geometryenables easy centering of the mandrelrelative to the packing. Stepped design alsoprovides low bearing stresses and torquefor longer bearing life.
Reliable UV packingWith zero failures in thousands of high-pressuregate valve stem seal applications worldwide,proprietary UV packing provides greatersealability with lower torque than comparableseals.
See specifications tables (page SJ5A) for sizes, dimensions, weights, materials, and part numbers.
-
7/22/2019 FMC Flowline Products and Services Catalog
23/74
WU1
Positive identificationFor positive identification in thefield, all Weco wing union nutsand subs include the Weco name,union figure number, size, andpressure rating. Additionally, Wecowing unions for sour gas serviceare stamped Sour Gas.
Weco wing unions are the most complete line of standard and sour-gas servicepipe connectors in the world. Available in 1 to 12-inch nominal pipe sizes with
cold working pressures up to 20,000 psi, Weco wing unions are manufacturedusing the finest raw materials, tooling procedures, and heat-treating techniquesavailable. Materials meet ASTM and AISI standards. Each union is carefullyinspected to ensure long, dependable service in the most extreme conditions.Like all pressure containing products, Weco wing unions require specialhandling (see inside back cover for Warnings and Cautions).
Fast make-up, break-outThree lug nuts and self-locking
ACME threads provide fastmake-up and break-outregardless of position or spacerestrictions.
Simple identification
New, factory-shipped Wecowing unions are color codedfor quick identification.
Choice of end connections
Weco wing unions are available withline pipe or tubing threads, butt weld,or non-pressure seal end connections.
Interchangeable partsAll Weco wing union parts of the samefigure number, size, and pressure ratingare interchangeable. This feature makes iteasy to match male and female subs thatare frequently made-up and broken-out.
Original WecoWing Unions
-
7/22/2019 FMC Flowline Products and Services Catalog
24/74
WU2
Original WecoWing Unions
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NominalPipeSizes,
inches
PressureRating,psi,bar
Not
es
250
212
65
380
112
40
125
114
32
4100
5125
6150
8200
10250
12300
SourGas(seenote8)
1,00069
2,000
138
2,000
138
2,000
138
2,000
138
2,500
172
4,000
276
6,000
414
6,000
414
10,000
690
10,000
690
15,000
1034
20,000
1379
Figure
Number
Assembly
ColorKey
Standard
Service
100
200
206
207
211
400
400
600
602
1002
1003
1502
2002
2202
Standard
2,500
172
4,000
276
6,000
414
7,500
517
7,500
517
10,000
690
15,000
1034
1 1,2,3,9
1,3,10
1,2,3
1 1 1,5,6
1,4
1 1,2
7 7
1,500
103
3,000
207
3,000
207
3,000
207
3,000
207
3,750
259
6,000
414
9,000
621
9,000
621
15,000
1034
15,000
1034
22,500
1551
30,000
2068
3,750
259
6,000
414
9,000
621
11,250
776
11,250
776
15,000
1034
22,500
1551
Cold
Working
Cold
Working
Test
Test
8.
Allunionsforsourgasservicearepaintedolivegreen,stampedSOURGASorNACE
MR-01-75andhavespeciallymodifiedmaterialproperties.
9.
5and6-inchsizesratedat7,500psiCWPand11,250test;5and6-inchunionsfor
sourgasserviceratedat5,000psiCWPand
7,500psitest.
10.4and5-inchsizesratedat7,500psiCWPand11,250test;4and5-inchunionsfor
sourgasserviceratedat5,000psiCWPand
7,500psitest.
Sourgasservice
FMCmanufacturesWecosourgasunionsinacc
ordancewiththeNationalAssociationof
CorrosionEngineers(NACE)StandardMR-01-75
andAmericanPetroleumInstitutes(API)
StandardRP-I4-E.
Notes
NA-NotAvailable
Allendconnectionswithlinepipethreadsunlessotherwisenoted.
1.Butt-weldavailable.Consultfactoryforwall
thickness.
2.Nonpressuresealconfigurationsavailable.
3.Powermake-upmustbeusedforlinepipeth
readedconnectionstoachieveratedcoldworkingpressure.
4.Linepipethreadsarenotofferedforsourga
sserviceinthisfigurenumber.
5.Linepipethreadsarenotrecommendedfor
sourgasserviceabove4-inchnominalpipesize.
6.Figure400availablein51/2-and7-inchOD
withcasingthreads.
7.Availableinbutt-weldendsonly.
-
7/22/2019 FMC Flowline Products and Services Catalog
25/74
Original WecoWing Unions
Low-Pressure Services (1,000 to 2,000 psi)Weco wing unions for low-pressure services feature a primarymetal-to-metal seal. The spherical surface of the male suband the conical surface of the female sub provide a large,ball-and-cone sealing surface. This metal-to-metal seal remainsleak-proof even when one surface is slightly pitted ormisaligned.
Proven Seal Designs
Tubingor pipe
Sealring
Medium-Pressure Services (2,000 to 4,000 psi)Many Weco wing union designs supplement the metal-to-metalseal with a resilient O-ring in the male sub. The replaceableO-ring extends union life and protects the metal-to-metal sealagainst corrosion.
High-Pressure Services (6,000 to 20,000 psi)Weco wing unions for high-pressure services feature areplaceable, lip-type seal ring in the female sub. This primaryseal protects the secondary metal-to-metal seal from abrasion
and corrosion while minimizing flow turbulence.
NPS (Non-Pressure Seal) OptionFigures 602, 1002, and 1502The Weco non-pressure seal option is especially designed forabrasive, high-pressure wing union services where weldedconnections are undesirable. This design provides strong,permanent end connections without butt welding. The unionends are shop assembled to pipe or tubing. An epoxy threadcompound is used to secure the connection.
Metal-to-metal seal
Seal
ring
Sealring
Metal-to-metal seal
Metal-to-metal seal
Femalesub
Malesub
Femalesub
Malesub
Female
sub
Malesub
Femalesub
Malesub
Interchangeable partsWeco wing union parts of the same figure number, size, and pressure rating areinterchangeable, making it easy to match male and female subs that are frequentlymade-up and broken-out. For positive identification in the field, all Weco wing unionnuts and subs include the Weco name, figure number, size, and pressure rating. It isvital that the user positively identify union connections and components to avoidmismatch conditions and potential union failure. See inside back cover for details.
WU3
-
7/22/2019 FMC Flowline Products and Services Catalog
26/74
WU4
See specifications tables (pages WU1A to WU6A) for sizes, dimensions, weights, materials, and part numbers.
Original WecoWing Unions
Figure 1001,000 psi cold working pressure
Recommended serviceManifold and line connections
Features Pressure-tight make-up with hammer Economical low-pressure union
Figure 2002,000 psi cold working pressure
Recommended serviceGeneral service manifolds and lines
Features Economical, general-purpose union 1 to 4-inch sizes
Figure 2062,000 psi cold working pressure
Recommended serviceManifold line connections, suction service,and corrosion service
Features O-ring in male sub improves sealing and protects
metal-to-metal seal against corrosion Replaceable O-ring extends union service life 1 to 10-inch sizes
Figure 2072,000 psi cold working pressure
Recommended serviceSeals manifold connections and protects unionthreads
Features Parts interchangeable with Figures 200 and 206 O-ring on blanking cap ensures a leak-free seal Cap can be tapped for pressure gauge Available in butt-weld
Figure 2112,000 psi cold working pressure
Recommended serviceProduction systems with electrolytic corrosionproblems
Features Laminated insulating rings provide 35 millionohms resistance across the union
O-ring in male sub provides a positive primary seal Seal ring in female sub delvers a positive
secondary seal
Figure 4004,000 psi cold working pressure through 4-inch
sizes; 2,500 psi cold working pressure, 5 through
12-inch sizes
Recommended serviceManifold line connections, pump suction,and mud services
Features 2-1/2 through 12-inch sizes have O-rings for
primary seal Butt-weld available Available for sour gas service
-
7/22/2019 FMC Flowline Products and Services Catalog
27/74
See specifications tables (pages WU1A to WU6A) for sizes, dimensions, weights, materials, and part numbers.
Original WecoWing Unions
Figure 6006,000 psi cold working pressureRecommended serviceSteam service, boiler connections, and manifoldline connections for production, drilling, and wellservicing
Features Bronze seat provides primary seal; will not rust
in water services
Figure 6026,000 psi cold working pressure
Recommended serviceManifold line connections and mud service
Features Replaceable, lip-type seal provides primary seal,
protects secondary metal-to-metal seal, andminimizes flow turbulence
Butt-weld available Available for sour gas service at 6,000 psi
cold working pressure
Figure 100210,000 psi cold working pressure through 4-inch
sizes; 7,500 psi cold working pressure, 5 and6-inch sizes
Recommended serviceCementing, fracturing, acidizing, testing, andchoke-and-kill lines
Features Replaceable, lip-type seal 5 and 6-inch sizes have O-rings for primary seals Available for sour gas service: 7,500 psi cold
working pressure Butt-weld available
Misaligning union10,000 psi cold working pressure, 2 and 3-inchsizes; 7,500 psi cold working pressure, 4 and5-inch sizes
Recommended serviceFor high-pressure connections where lines cannotbe aligned
Features Ball seat provides positive seal with up to 7-1/2
misalignment; 2-inch model up to 4 Replaceable O-ring on male sub provides primary
seal Available with threaded or butt-weld ends
Figure 150215,000 psi cold working pressureRecommended serviceCementing, fracturing, acidizing, testing, andchoke-and-kill lines
Features Replaceable, lip-type seal Available for sour gas service: 10,000 psi cold
working pressure; butt-weld or non-pressureseal configurations only
Butt-weld available
Figure 200220,000 psi cold working pressure
Recommended serviceCementing, fracturing, acidizing, testing, andchoke-and-kill lines
Features Replaceable, lip-type seal 2 and 3-inch line sizes Butt-weld configurations only
WU5
Figure 1003
-
7/22/2019 FMC Flowline Products and Services Catalog
28/74
WU6
See specifications tables (page WU5A) for sizes, dimensions, weights, materials, and part numbers.
Original WecoWing Unions
Sour Gas ServiceFMC Technologies manufactures Weco sour gas wing unions inaccordance with the National Association of Corrosion Engineers(NACE) Standard MR-01-75 and American Petroleum Institute(API) Standard RP-14-E. These outstanding, field-proven unionsare specially heat treated for controlled hardness. For fast, sureidentification, each Weco sour gas union is stamped Sour Gasor NACE MR-01-75 using low stress dot stamping and paintedwith an olive green zinc-chromate primer that is unique to sourgas equipment. FMC Fluid Control uses fluoroelastomer seals orO-rings in all sour gas unions, but does not warrant theperformance of any elastomer for sour gas service.
Weco Wing Unions forSour Gas Service
Figure 4004,000 psi cold working pressure, 1 through 4-inch sizes; 2,500 psicold working pressure, 5 through 12-inch sizes; butt-weld onlyabove 4-inch sizes
Figure 6026,000 psi cold working pressure, 1 through 4-inch sizes
Figure 10027,500 psi cold working pressure, 1 through 4-inch sizes;5,000 psi cold working pressure, 5 and 6-inch sizes
Figure 10037,500 psi cold working pressure, 2 and 3-inch sizes;5,000 psi cold working pressure, 4 and 5-inch sizes
Figure 150210,000 psi cold working pressure, 1 through 4-inch sizes;butt-weld or non-pressure seal configurations only
Figure 220215,000 psi cold working pressure, 2, 2-1/2, and 3-inch sizes;butt-weld only
Meets industry standards
All Weco wing unions for sour gasservice meet both the NationalAssociation of Corrosion EngineersStandard MR-01-75 and APIStandard RP-14-E.
Controlled hardnessWeco union subs and nuts are
specially heat-treated and 100%tested for controlled hardness.
Positive sealingPrimary fluoroelastomer seal andmetal-to-metal seal combine todeliver positive sealing throughout thestated pressure range.
Quick, positive identification
Weco unions for sour gas service arestamped Sour Gas and painted withan olive green zinc-chromate primer toensure quick, positive identification.
Caution: It is possible to interchange sour gas parts with standardservice products. Users must adopt safe practices for identification,installation, use, maintenance, and storage of sour gas equipment.(See inside back cover for additional Warnings and Cautions.)
Figure 2202
-
7/22/2019 FMC Flowline Products and Services Catalog
29/74
See specifications tables (pages WU5A and WU6A) for sizes, dimensions, weights, materials, and part numbers.
Other WecoUnions
Tank Unions500 psi maximum line pressure, 6, 8, 10, and 12-inch sizes
Recommended serviceMud tanks, mud tank connecting lines, and pump suction flanges
Features Molded nitrile seal provides a compression seal Makes up with hammer Elongated cross-section of seal ring ensures greater sealing
surface when in contact with the pipe Accepts up to 7 pipe misalignment 6, 8, and 10-inch sizes may be socket welded to pipe or butt
welded to tubing; 12-inch sizes require butt-weld
Air-O-Unions150 psi maximum line pressure, 4, 6, 8, 10, 13-3/8, and 16-inch sizes
Recommended serviceMud suction and return lines and low-pressure fluid lines
Features Shot of rig air inflates tube to seal around pipe Fast, easy make-up without close alignment Allows pipe expansion or misalignment without breaking the seal No nuts, bolts, or wrenches required
Suction-Hose Unions500 psi maximum line pressure, 4, 5, and 6-inch sizes
Recommended serviceMud system suction lines
Features Replaceable O-ring seal Choice of end fittings Secondary metal-to-metal seal Socket welded, threaded, or hose nipple
Socket weld
Line pipe threads
Socket weld with female plug assembly
Hose nipple
WU7
-
7/22/2019 FMC Flowline Products and Services Catalog
30/74
WecoFittings and Pup Joints
FP1
Integral Weco wingunion end connectionsHigh-strength, high integrityconnections every time.
Weco fittings and pup joints have been optimized for minimum weight and size.These rugged products are ideal for handling a complete range of standard andsour gas well servicing fluids at pressures up to 20,000 psi. Available in 1 to 4-inchsizes, both fittings and pups feature forged construction with integral Weco wingunion ends (see page WU2 for high-pressure and NPS seal designs) for a high-strength, high-integrity connection every time. Weco pups and fittings come withfull material traceability and can be supplied with Charpy impact values. Like allpressure containing products, Weco pups and fittings require special handling(see inside back cover for Warnings and Cautions).
Forged constructionwith full traceability
Optimized, lightweight designsSave valuable weight and space.
Complete range of configurationsTees, elbows, crosses, wyes, and lateralscan be combined to suit virtually anyapplication.
Weco FittingsUp to 20,000 psi cold working pressure;1 to 4-inch bore sizes
Recommended serviceHigh-pressure well servicing lines, fracturinglines, testing lines, cementing and circulatinglines, and other well service and stimulationapplications
-
7/22/2019 FMC Flowline Products and Services Catalog
31/74
FP2
WecoFittings and Pup Joints
FMC Technologies offers the smallest, lightest integral forged fittings on
the market. To minimize the size and weight of each fitting, engineers
performed a finite element stress analysis on each fitting body
design. From these results, the geometry was
optimized for weight, and forgings were developedfor each size and type of fitting. The fittings
were then subjected to laboratory and field
testing. The result: You save weight and space
without sacrificing service life or safety.
Weco Pup JointsUp to 20,000 psi cold working pressure;2, 3, and 4-inch bore sizes, lengths to 20 feet
Recommended ServiceHigh-pressure well servicing lines, fracturinglines, testing lines, cementing and circulatinglines, and other well service and stimulationapplications
Weco wing union nutdetaches for field repairPermits fast, easy service atthe job site.
Integral and NPS designs
Available in integral and non pressureseal designs to suit virtually all oilfieldapplications.
Specially machined shoulderprevents nut from slidingdown pupDesign decreases risk of injury to
personnel.
Recessed area for name tagProvides protected area for pup jointidentification.
O P T I M I Z E D F O R G E D F I T T I N G S
-
7/22/2019 FMC Flowline Products and Services Catalog
32/74
Integrated Services
IS1
Chiksanand Wecoflowline products have set global industry standardsfor quality, reliability, and service life for almost 75 years. However, superiorproducts alone are not enough to meet the diverse challenges that operators
and well-servicing companies face today. FMCs Integrated Services businesspledges to meet or exceed customer expectations by providing value throughservices, technology, and competencies, and by safely following establishedstandards without compromise. This total solutions approach to managingfluid control equipment is helping flowline customers worldwide realize themaximum value and service life from their fluid control assets.
-
7/22/2019 FMC Flowline Products and Services Catalog
33/74
IS2
Integrated Services
InteServ DatabaseFMCs proprietary web-based database delivers unmatchedstandards for flowline data collection, documentation, andcertifications. Built-in planning and tracking tools identifyequipment usage patterns, inspection, and repair intervals toensure the right products are shipped to the right job in top
working condition. The bottom line: Customers improve safety,maximize equipment utilization, and minimize equipmentmaintenance costs.
4Fully integrated global database4 Internet-based asset tracking and reporting system4Flexible data extraction tools for detailed asset analysis
Worlds Leading FlowlineService Solution
-
7/22/2019 FMC Flowline Products and Services Catalog
34/74
IS3
Integrated Services
Mobile Inspection and RepairFMC introduced its mobile inspection and repair service in1996. Today, the industrys largest fleet of mobile units performscomplete inspection and repair services at customer locationsthroughout the world. The mobile package includes inspection,testing, repair, documentation, and certification with the goalof extending product life and reducing operator costs.
Asset ManagementTracking and maintaining the volume of flowline equipmentused in high-pressure pumping services is a major undertaking.Asset management is a cooperative program where special lytrained FMC personnel inventory, track, and maintain acustomers flowline assets at their facility or in a designatedFMC facility. Asset management is helping customers world-wide significantly increase equipment utilization rates andservice life while reducing total costs and safety concerns.
-
7/22/2019 FMC Flowline Products and Services Catalog
35/74
IS4
Integrated Services
Spare Parts ManagementChiksan and Weco products are manufactured to precise
dimensional tolerances using specialized materials of construc-tion, unique machining processes, and strict quality controlmeasures. The service life of these products can be extendedwith routine maintenance and periodic repair using genuineFMC spare parts.
Service CentersTo keep Chiksan and Weco products in top working condition,FMC offers factory rebuild services from strategic locationsworldwide. FMC is aggressively working to expand its in-houserefurbishment services to meet growing demand, includingbutterfly valve and cement head inspection and repair.
-
7/22/2019 FMC Flowline Products and Services Catalog
36/74
-
7/22/2019 FMC Flowline Products and Services Catalog
37/74
Chiksanand WecoSpecifications
Contents
Weco Plug Valve Specifications PV1A
Weco Check Valve Specifications CV1A
Weco Butterfly Valve and Actuator Specifications BV1A
Chiksan Swivel Joint Specifications SJ1A
Weco Wing Union Specifications WU1A
Weco Fitting Specifications F1A
Weco Pup Joint Specifications PJ1A
Recommended Temperature Ranges TR1A
Warnings and Cautions IBC
S1
-
7/22/2019 FMC Flowline Products and Services Catalog
38/74
Plug Valves
ULT 150
DR 150
DR 200
ULT 150 (Manual)
ULT 100 (Manual)
ULT 150 (Hydraulic)
ULT 100 (Hydraulic)
ULT 150 (Handwheel)
ULT 100 (Handwheel)
ULT 200 (Hydraulic)
ULT 200 (Handwheel)
ULT 200 (Handwheel)
ULT 100 (Hydraulic)
ULT 100 (Handwheel)
ULT 150 (Hydraulic)
ULT 150 (Handwheel)
1
1
1x2
1x2 (.38 bore)
1x2
2
2
2
2
3
3
3
3
3
3
3
3
3
4
4
4
4
P516114
P524578
P516108
P516146
P516208
3247527
3248705
3223008
3234183
3265904
P501010
3265123
3267427
3265122
3265257
P519087
P519453
P522233
P518352
P518356
P516015
P519749
1502
1002
1502
1502
1002
1502
1002
2002
2202
1502
1002
1502
1002
1502
1002
2002
2002
2202
1002
1002
1502
1502
Standard
Sour
Standard
Standard
Sour
Standard
Sour
Standard
Sour
Standard
Sour
Standard
Sour
Standard
Sour
Standard
Standard
Sour
Standard
Standard
Standard
Standard
15,000 (1034)
10,000 (690)
15,000 (1034)
15,000 (1034)
10,000 (690)
15,000 (1034)
10,000 (690)
20,000 (1380)
15,000 (1034)
15,000 (1034)
10,000 (690)
15,000 (1034)
10,000 (690)
15,000 (1034)
10,000 (690)
20,000 (1380)
20,000 (1380)
15,000 (1034)
10,000 (690)
10,000 (690)
15,000 (1034)
15,000 (1034)
37 (16.8)
37 (16.8)
43 (19.5)
58 (26.3)
37 (16.8)
93 (42.2)
93 (42.2)
83 (37.6)
83 (37.6)
238 (108)
241 (109)
337 (153)
340 (154)
288 (131)
288 (131)
754 (342)
634 (288)
640 (290)
738 (335)
660 (299)
774 (351)
660 (299)
Model NominalSize, in. Part No. Weco EndConnection* Service CWPpsi (bar) Weightlb (kg)
Note: 1, 1x2 ULT 150, DR150 and DR200 plug valves can be furnished with hydraulic actuators.
* Other end connections are available. Consult factory.
C
D
A B
E
C
F
D
G
E
DR 150 with Manual Operator ULT 150 with Handwheel Operator
WecoPlug Valve Specifications
PV1A
-
7/22/2019 FMC Flowline Products and Services Catalog
39/74
ULT 150 with Manual Operator ULT 150 with Hydraulic Actuator
G
E
C
D
C
G
ED
WecoPlug Valve Specifications
PV2A
15.69 (399)
15.69 (399)
15.69 (399)
15.69 (399)
15.69 (399)
15.69 (399)
22.08 (561)
22.08 (561)
22.08 (561)
22.85 (580)
22.85 (580)
22.85 (580)
22.85 (580)
ULT 150
DR 150
DR 200
ULT 150 (Manual)
ULT 100 (Manual)
ULT 150 (Hydraulic)
ULT 100 (Hydraulic)
ULT 150 (Handwheel)
ULT 100 (Handwheel)
ULT 200 (Hydraulic)
ULT 200 (Handwheel)
ULT 200 (Handwheel)
ULT 100 (Hydraulic)
ULT 100 (Handwheel)
ULT 150 (Hydraulic)
ULT 150 (Handwheel)
4.69 (119)
4.69 (119)
4.69 (119)
4.69 (119)
4.69 (119)
6 (152)
6 (152)
6.06 (154)
6.06 (154)
5.88 (149)
5.88 (149)
5.88 (149)
5.88 (149)
5.88 (149)
7.88 (200)
7.88 (200)
9.19 (233)
9.19 (233)
6.59 (167)
6.59 (167)
6.59 (167)
6.59 (167)
6.59 (167)
8.05 (205)
8.05 (205)
8.05 (205)
8.05 (205)
14.27 (363)
14.27 (363)
21.81 (554)
21.81 (554)
14.47 (368)
14.47 (368)
29.63 (753)
17.62 (448)
17.62 (448)
28.49 (724)
19.1 (485)
28.49 (724)
19.1 (485)
1.75 (45)
1.75 (45)
1.75 (45)
1.75 (45)
1.75 (45)
2.62 (67)
2.62 (67)
2.62 (67)
2.62 (67)
5 (127)
5 (127)
5 (127)
5 (127)
5 (127)
5 (127)
6.26 (159)
6.26 (159)
6.26 (159)
7.00 (118)
7.00 (118)
7.00 (118)
7.00 (118)
2.88 (73)
2.88 (73)
3.93 (100)
3.93 (100)
3.93 (100)
3.93 (100)
3.93 (100)
3.76 (96)
3.76 (96)
4.55 (116)
4.55 (116)
4.55 (116)
4.55 (116)
4.55 (116)
4.55 (116)
6 (152)
6 (152)
6 (152)
4.94 (126)
4.94 (126)
6.14 (156)
6.14 (156)
22.12 (562)
22.12 (562)
36.88 (937)
36.88 (937)
38.36 (974)
38.29 (973)
Model Ain. (mm) Bin. (mm) Cin. (mm) Din. (mm) Ein. (mm) Fin. (mm) Gin. (mm)
1
1
1x2
1x2 (.38 bore)
1x2
2
2
2
2
3
3
3
3
3
3
3
3
3
4
4
4
4
NominalSize, in.
-
7/22/2019 FMC Flowline Products and Services Catalog
40/74
Note: Some sizes and models are available with a vent cap connection for relief of trapped pressure on downstreamside which can occur in flowlines when valve is checked closed. Consult factory for more information.
4
2
3
Cold WorkingPressure, psi (bar)
NominalSize, in.
EndConnections
315,000 (1034)
15,000 (1034)
10,000 (690)
15,000 (1034)
1502 FxM
1502 MxF
1002 FxM
1502 FxM
PartNumber
P521623
P524440
P525809
P524760
FlowOrientation
Cold WorkingPressure, psi (bar)
EndConnections
1.5
2
3
15,000 (1034)
15,000 (1034)
15,000 (1034)
20,000 (1379)
6,000 (414)
6,000 (414)
6,000 (414)
15,000 (1034)
15,000 (1034)
20,000 (1379)
6,000 (414)
10,000 (690)
15,000 (1034)
15,000 (1034)
1502 MxF
1502 FxM
1502 MxF
2002 FxM
602 FxM
602 MxF
602 FxF
1502 FxM
1502 MxF
2002 FxM
602 FxM
1002 FxM
1502 FxM
1502 MxF
PartNumber
P519734
3269173
3269472
3269158
P501959
P519978
P502035
3269052
P518432
P520099
P513204
P517718
P517894
P518468
FlowOrientation
Cold WorkingPressure, psi (bar)
EndConnections
1.515,000 (1034)
15,000 (1034)
15,000 (1034)
15,000 (1034)
1502 FxM
1502 MxF
1502 FxM
1502 FxM
PartNumber
P525269
P523811
P510771
P510773
FlowOrientation
Ain. (mm)
Bin. (mm)
Ain. (mm)
Bin. (mm)
Ain. (mm)
Bin. (mm)
Weightlb (kg)
Standard
Reverse
Standard
Standard
Reverse
Standard
Reverse
Standard
Standard
Reverse
Standard
Standard
Reverse
Standard
Standard
Standard
Standard
Reverse
Standard
Reverse
Standard
Standard
116 (53)
116 (53)
239 (109)
276 (126)
Weightlb (kg)
Weightlb (kg)
NominalSize, in.
NominalSize, in.
4
7 (178)
7 (178)
7 (178)
8 (203)
8.12 (206)
8.12 (206)
8.12 (206)
8.12 (206)
8.12 (206)
13 (330)
12.25 (311)
11.25 (286)
12.25 (311)
12.25 (311)
15.67 (398)
15.67 (398)
19.75 (502)
19.75 (502)
14.04 (357)
14.04 (357)
14.04 (357)
16.91 (430)
15.67 (398)
15.67 (398)
12.27 (312)
15.67 (398)
15.67 (398)
22.79 (579)
22.79 (579)
21.13 (537)
22.79 (579)
22.79 (579)
14.04 (357)
14.04 (357)
14.04 (357)
15.67 (398)
9.54 (242)
9.54 (242)
11.88 (302)
11.88 (302)
10.31 (262)
10.31 (262)
10.31 (262)
11.43 (290)
81 (37)
84 (38)
84 (38)
123 (56)
121 (55)
124 (56)
100 (45)
122 (55)
126 (57)
442 (201)
378 (171)
280 (127)
385 (175)
385 (38)
86 (39)
86 (39)
87 (40)
130 (59)
WecoCheck Valve Specifications
Top Entry Check Valves
In-Line Flapper Check Valves
Dart Check Valves
Consult factory for configurations available for models not shown above as well
as installation instructions.
CV1A
-
7/22/2019 FMC Flowline Products and Services Catalog
41/74
WecoCheck Valve Specifications
CV2A
Top Entry Check Valves
In-Line Flapper Check Valves
Dart Check Valves
B
A
B
A
B
A
-
7/22/2019 FMC Flowline Products and Services Catalog
42/74
WecoButterfly Valve Specifications
Model 12
Body: Ductile Iron Disc: Ductile Iron Stems: 416 Stainless Steel Seat: Nitrile
* 2 inch diameter with 1/2 inch keyway
Model 12N (For use with lightweight industrial flanges.)
Body: Ductile Iron Disc: Ductile Iron
Stems: 416 Stainless Steel Seat: Nitrile
BV1A
2 2 1/2 3 4
3227485 3227486 3227487 3245819
D
imensions,
in.,mm
A
B
C
D
E
F
G
H
I
J
43132126
376.2
418105
211652.4
58 Sq.15.9
4102
1132
26.2
15841
716
11.1
31482.6
52932150
35892.1
538137
311677.8
58 Sq.15.9
4102
1132
26.2
13445
716
11.1
31482.6
7932185
414108
678175
4116103
58 Sq.15.9
4102
1932
32.5
251
716
11.1
31482.6
558150
3113284.9
478124
21263.5
58 Sq.15.9
4102
1132
26.2
13445
716
11.1
31482.6
Sizes, in.
Part No.
6 8 10 12 14
3227493 3232417 3227495 3227496 3255865
72532198
5516135
834222
6116154
58 Sq.15.9
4102
1932
32.5
21854
716
11.1
31482.6
91332239
7178
11279
8116205
78 Sq.22.2
6152
1932
32.5
21264
916
14.3
5127
102132271
814210
1338340
10254
78 Sq.22.2
6152
1932
32.5
21264
916
14.3
5127
12532309
934248
1618410
12305
118 Sq.28.6
6152
1932
32.5
376
916
14.3
5127
143132380
1038264
171116449
1314337
118 Sq.28.6
6152
1932
32.5
376
916
14.3
5127
16
3255869
17716443
111516303
2018511
1514387
2*50.8
8203
3316
81
4102
1732
13.5
612165
2 3 4 5 6
3229885 3230052 3229886
A
B
C
D
E
F
G
H
I
J
K
L
M
43132126
376.2
418105
211652.4
58Sq.15.9
4101.6
113226.2
1
58
41.3
716
11.1
31482.6
33482.6
4102
5167.9
52932150
35892.1
538137
311677.8
58Sq.15.9
4101.6
113226.2
1
34
44.5
716
11.1
31482.6
438111
6152
5167.9
7932185
414108
678175
4116103
58Sq.15.9
4101.6
193232.5
250.8
716
11.1
31482.6
638162
6152
389.5
3229887 3229888
72532198
5516135
834222
6116154
58Sq.15.9
4101.6
193232.5
2
18
54
716
11.1
31482.6
812216
8203
389.5
7932185
41316122
734197
5116129
58Sq.15.9
4101.6
193232.5
2
18
54
716
11.1
31482.6
62932175
6152
389.5
Dimensions,
in.,mm
Sizes, in.
Part No.
G
A
B
C
D
E
H
I Dia., 4 holes thru;on J dia. bolt circle
F
LNo. of notchesequally spaced
MRadius of
notch
K Dia.
Model 12N only
-
7/22/2019 FMC Flowline Products and Services Catalog
43/74
Model 22
Body: Ductile Iron Disc: Ductile Iron Stems: 416 Stainless Steel Seat: Nitrile
WecoButterfly Valve Specifications
BV2A
2 2 1/2 3 4 5 6 8 10 12
3225730 3225731 3225732 3225733
A
B
C
D
E
F
G
H
I
J
7932185
376.2
418105
211652.4
58 Sq.15.9
4101.6
1132
26.2
15841.3
716
11.1
31482.6
72532198
3113284.9
478124
21263.5
58 Sq.15.9
4101.6
1132
26.2
13444.5
716
11.1
31482.6
8116205
35892.1
538131
311677.8
58 Sq.15.9
4101.6
1132
26.2
13444.5
716
11.1
31482.6
92132245
41316122
734197
5116129
58 Sq.15.9
4101.6
1932
32.5
21454
716
11.1
31482.6
9532233
414108
678175
4116103
58 Sq.15.9
4101.6
1932
32.5
250.8
716
11.1
31482.6
10532258
5516135
834222
6116154
58 Sq.15.9
4101.6
1932
32.5
21454
716
11.1
31482.6
111932294.5
7178
11279
8116205
78 Sq.22.2
6152.4
1932
32.5
21263.5
916
14.3
5127
122732326
814210
1338340
10254
78 Sq.22.2
6152.4
1932
32.5
21263.5
916
14.3
5127
141132364
934248
16116408
12305
118 Sq.28.6
6152.4
1932
32.5
376.2
916
14.3
5127
3225734 3225735 3225736 3225737 3225738
Dimensions,
in.,mm
Sizes, in.
Part No.
G
A
B
C
D
E
HI dia., 3 holes thru;
on J dia. bolt circle
F
45
90
-
7/22/2019 FMC Flowline Products and Services Catalog
44/74
Model 22L
Body: Ductile Iron Disc: Ductile Iron Stems: 416 Stainless Steel Seat: Nitrile
* 2 inch diameter with 1/2 inch keyway** 2.5 inch diameter with 5/8 inch keyway
WecoButterfly Valve Specifications
BV3A
2 2 1/2 3 4 5 6 8 10 12 14 20 24
3225748 3225749 3225750 3225751
A
B
C
D
E
F
G
H
I
J
K
L
M
7932185
376.2
6152
211652.4
58 Sq.15.9
4101.6
113226.2
15841.3
716
11.1
31482.6
58-11
4102
434121
72532198
3113284.9
7178
21263.5
58 Sq.15.9
4101.6
113226.2
13444.5
716
11.1
31482.6
58-11
4102
512140
8116205
35892.1
712191
311677.8
58 Sq.15.9
4101.6
113226.2
13444.5
716
11.1
31482.6
58-11
4102
6152
92132245
41316122
10254
5116129
58 Sq.15.9
4101.6
193232.5
21854
716
11.1
31482.6
34-10
8204
812216
9532233
414108
9229
4116103
58 Sq.15.9
4101.6
193232.5
250.8
716
11.1
31482.6
58-11
8204
712191
10532258
5516135
11279
6116154
58 Sq.15.9
4101.6
193232.5
21854
716
11.1
31482.6
34-10
8204
912241
111932295
7178
1312343
8116205
78 Sq.22.2
6152.4
193232.5
21263.5
916
14.3
5127
34-10
8204
1134299
122732326
814210
16406
10254
78 Sq.22.2
6152.4
193232.5
21263.5
916
14.3
5127
78-9
12305
1414362
141132364
934248
19483
12305
118 Sq.28.6
6152.4
193232.5
376.2
916
14.3
5127
78-9
12305
17432
143132380
1038264
2034527
1314337
118 Sq.28.6
6152.4
193232.5
376.2
916
14.3
5127
1-8
12305
1834476
16
17716443
111516303
2314591
15932388
2*50.8
8203.2
331681
4101.6
1732
13.5
612165.1
1-8
16406
2114540
19716494
131516354
2714692
1914489
2*50.8
8203.2
331681
5127
1732
13.5
612165.1
118-7
20508
25635
2334603
1718435
32813
23584
2.5**63.5
8203.2
438111
6116154
2132
16.7
612165.1
114 -7
20508
2912750
3225752 3225753 3225754 3225755 3225756 3255867 3255870 3255871 32558733255872
18
18716468
121516329
25635
17932439
2*50.8
8203.2
331681
412114.3
1732
13.5
612165.1
118-7
16406
2234578
Dimensions,
in.,mm
Sizes, in.
Part No.
G
A
B
K UNC tapped hole thruL places onM diameter bolt center
C
D Dia.
E
H
I dia., 4 holes thru;on J dia. bolt circle
2-12 size
14-24 size I dia., 4 holes thru;on J dia. bolt circle
F
F
F Dia.
45
90
-
7/22/2019 FMC Flowline Products and Services Catalog
45/74
WecoButterfly Valve Accessories
Standard and Throttle Handles
Gear Operators
BV4A
Note: Butterfly valve assemblies include a standard detent plate for on-off operations.Handle assemblies for throttling service include a throttling detent plate to replacethe standard detent plate on the valve.
2 - 3 4 & 6 8 & 10 12
3234078
Dimensions, in., mm
A
B
C
D
E
23860.3
912241
23469.9
171636.5
4102
Standard for Models 12, 12N
Standard for Models 22, 22L
Throttling for all Models
3234092
3235577
3231336
3231337
3235578
3227946
3216208
3228018
3227947
3216224
3228019
21263.5
1078276
23469.9
1111642.9
4102
376.2
15381
4102
1111642.9
6152
23469.9
19483
4102
1111642.9
6152
Valve Size, in.
Dimensionsin., mm
A
B
C
D
E
F
G
H
I
J
StandardHandwheel
Chain-wheelAttachment
21854
111627
612165
5127
434121
158
41.36516160
31288.9
376.2
4102
21263.5
11431.8
10254
712191
7178
2916
65.1918232
434121
31288.9
614159
21263.5
11431.8
10254
712191
7178
2916
65.11158295
434121
31288.9
614159
376.2
11238.1
14356
15381
734197
318
79.41514387
558143
31288.9
612165
35892.1
23860.3
14356
15381
958245
412
1141514387
534146
31288.9
9229
5127
21263.5
14356
15381
1158295
458
1181714438
912241
31288.9
1014260
Valve Size, in.
148 & 10 12 16 - 20 242 - 6
3217838
3223689
3217839 3217840 3256506 32565083256507
3223690 3223691 3256839 CF3256840
C
E
DA
B
C
EThrottling Handle
Standard On-Off Handle
D = number of turns to open
E
J
F
H
GI
C
B
A
-
7/22/2019 FMC Flowline Products and Services Catalog
46/74
Pneumatic Actuators - Double Acting
WecoPneumatic Actuator Specifications
BV5A
lbkg
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.
in.mm
in.mm
330Model 350 550 550A 590 590A
2 - 6Sizes, in. 5 - 6 8 - 10 12 10 12
Weight
A
B
C
D
E
F
G
H
J
K
L
M
N
3235438 3237369 3236771 3237183 3237886 3237887Part #
8123.9
12916319
834222
351684.1
71316198
1151649.2
211652.4
250.8
37898.4
4516110
171636.5
38-16 UNC
31482.6
5815.9
188.2
1618511
12516313
351684.1
71316198
1151649.2
211652.4
351684.1
612165.1
4516110
171636.5
38-16 UNC
31482.6
5815.9
3515.9
1938492
131116348
5316133
12116308
331690.5
311677.8
351684.1
612165
5516135
17847.6
12-13 UNC
5127
7822.2
3515.9
1938492
131116348
5316132
12116308
331690.5
311677.8
351684.1
612165
5516135
17847.6
12-13 UNC
5127
11828.6
5525
22559
1578403
5316132
12116308
331681
311677.8
5516135
10916268
5516135
17847.6
12-13 UNC
5127
7822.2
5525
22559
1578403
5316139
12116308
331681
311677.8
5516135
10916268
5516135
17847.6
12-13 UNC
5127
11828.6
J
K
N squareN square broach
internal to acceptvalve stem
D
E
F
A
B C
4 mounting holesL on M bolt circleboth sides
1/4 NPTinlet
1/4 NPT inlet-double acting-breather-spring return
G
H
-
7/22/2019 FMC Flowline Products and Services Catalog
47/74
Pneumatic Actuators - Spring Acting
WecoPneumatic Actuator Specifications
BV6A
lbkg
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.
in.mm
in.mm
Weight
A
B
C
D
E
F
G
H
J
K
L
M
N
135.9
19916497
1534400
351684.1
858219
1151649.2
211652.4
250.8
37898.4
4516110
171636.5
38-16 UNC
31482.6
5815.9
2511.3
2014514
16716418
351684.1
858219
1151649.2
211652.4
351684.1
612165
4516110
171636.5
38-16 UNC
31482.6
5815.9
156.8
19916497
1534400
351684.1
858219
1151649.2
211652.4
250.8
37898.4
4516110
171636.5
38-16 UNC
31482.6
5815.9
3114.1
2014514
16716418
351684.1
858219
1151649.2
211652.4
351684.1
612165
4516110
171636.5
38-16 UNC
31482.6
5815.9
332Model
3237525
2 - 2 1/2Sizes, in.
333
3237368
3 - 4
354
3237373
3 - 4
355
3237515
5 - 6
Part #
596
3237865
8 - 10
597A
3237866
12
9342.2
3018765
24610
5116129
1318333
331681
311677.8
5516135
10916268
5516135
17847.6
12-13 UNC
5127
7822.2
10648.1
3018765.2
24610
5316132
1318333
331681
311677.8
5516135
10916268
5516135
17847.6
12-13 UNC
5127
11828.6
J
K
N squareN square broach
internal to acceptvalve stem
D
E
F
A
B C
4 mounting holesL on M bolt circleboth sides
1/4 NPTinlet
1/4 NPT inlet-double acting-breather-spring return
G
H
-
7/22/2019 FMC Flowline Products and Services Catalog
48/74
Pneumatic Vane Actuator
WecoPneumatic Actuator Specifications
BV7A
B
D
E
A
F
C
G
3/8-16 tapped hole x.56 deep3 places on 3.25 dia. bolt circleboth sides
1/4 NPT
Inlet
lbkg
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
in.mm
Weight
A
B
C
D
E
F
G
104.54
8.66220
5.56141
7.00178
4.62117
2.3158.7
3.4186.6
2.0050.8
3258068Part #
200Model
Fits 2 - 6 size butterfly valves
-
7/22/2019 FMC Flowline Products and Services Catalog
49/74
WecoActuator Sizing Information
Actuator Sizing Information
Required Operating Torques:
There are three torques to be considered when selectingthe proper actuator for a butterfly valve: (1) Seating Torque - The torque required to
displace a resilient seat and effect shutoff (2) Bearing Torque - The torque required to
overcome friction forces on the valve shaftbearing surfaces
(3) Dynamic Torque - Torque due to fluid forceswhich tend to close the valve.
The torques for resilient seated valves tabulated in thissection are the sum of (1) and (2) above for various shut-off pressures. These tabulated values include a safetyfactor large enough to insure proper valve operation inmost general butterfly valve applications. Where unusualservice conditions exist (such as likelihood of seat swell-ing, or low and high temperature seat hardening), anadditional safety factor may be applicable.
Dynamic Torque
Dynamic torque is torque on the valve shaft due to thefluid forces on the valve disc. This torque is a function ofvalve diameter, pressure drop, and a torque coefficient(Ct) which varies with angle opening. Torque is calculatedby the equation:
T = CtD3P Where: T = Dynamic torque (in-lb)
D = Valve Dia. (in.)C
t= Dynamic torque coefficient
(see table below)
Angle Open 0
0Ct
50
.050
20
.014
30
.022
40
.033
60
.087
70
.143
80
.215
90
0
10
.007
Ctvs. Angle Open
BV8A
-
7/22/2019 FMC Flowline Products and Services Catalog
50/74
WecoActuator Sizing Information
Actuators Sizing Torque for Weco Butterfly Valves
Dynamic torque is not usually of major concern inresilient seated butterfly valves unless the line velocityexceeds 20 fps. If line velocity exceeds this, a checkshould be made to insure that actuator output exceedsthe calculated dynamic torque. Dynamic torque shouldbe checked at 80 open for on-off applications.
Dynamic torque is of prime consideration in situationswhere line velocity is not recovered downstream of thevalve. This situation exists on installations where thereis an unlimited source and less than 6 diameters of pipedownstream of the valve. If a valve discharges to the
atmosphere, the pressure drop across the valve will beequal to the height of water above the valve for all anglesof valve opening. This pressure drop must not exceedthe pressure drop tabulated in Maximum P vs. Angle
Opening Tables for any angle. If it does, provisions mustbe made for velocity recovery by adding downstreampiping.
Actuator Sizing For Tee LinkagesFor standard tee linkage applications where oneactuator operates two butterfly valves of the same sizewith one valve opening as the other valve closes, theactuator sizing will be the same as for a single butterflyvalve application. For the actuator sizing for othertandem linkage applications, consult the factory.
Low-Torque ValvesUndercut discs are available for butterfly valve applica-tions that require lower seating torques. For completeinformation, consult factory.
BV9A
0 psi0 kPa
ValveSize,
in. 50 psi
345 kPa75 psi
517 kPa100 psi690 kPa
125 psi862 kPa
150 psi1034 kPa
175 psi1207 kPa
Seating Torque In Inch-lb (N*m), @ Various Line Pressures
2
2 1/2
3
4
5
6
8
10
12
14
16
18
20
24
9010
13015
20023
35040
53560
77087
1,350153
2,100237
3,000
339
3,680416
4,880551
6,230704
7,770878
11,1001250
9010
13015
20023
35040
53560
77087
1,350153
2,100237
3,000
339
4,240479
5,730647
7,460843
9,3801060
14,0101580
9210
13415
20623
36641
56664
82393
1,475167
2,340264
3,400
384
4,790541
6,580744
8,690982
11,0001243
16,9201910
9411
13816
21224
38243
59767
87699
1,600181
2,580292
3,800
429
5,350605
7,430840
9,9201121
12,6101425
19,8302240
9611
14216
21825
39845
62871
929105
1,725195
2,820319
4,200
475
5,900667
8,280936
11,1501260
14,2301610
22,7402570
9811
14617
22425
41447
65974
982111
1,850209
3,060346
4,600
520
6,480732
9,1401030
12,3901400
15,8401790
25,6502900
10011
15017
23026
43049
69078
1,035117
1,975223
3,300373
5,000
565
NOTE: For valves using Teflon seats, use torque value at highest standard value rating even for lower pressure applications.Above figures are for values used in wet service, for dry service valves contact factory.
-
7/22/2019 FMC Flowline Products and Services Catalog
51/74
Minimum Air Pressure for Weco Pneumatic Actuators OperatingWeco Valves at 175 psi Rated Pressure
Weco Pneumatic Actuator Torque Ratings (note air pressure)
Weco Model 200
Vane-Type Pneumatic ActuatorOperating ConditionsMaximum Operating Pressure 120 psi (8.27 bar)
Maximum Housing Pressure 180 psi (12.41 bar)
Displacement 41 cu. in. (672 cu. cm.)/90Stroke
Torque Data
Minimum Actuator Pressure for Weco Valvesat 175 psi line pressure
BV10A
WecoActuator Sizing Information
330
350
550
550A
590
590A
332
333
354
355
596
597A
Displacementcu. in.cu. cm
Rated torquein. lbN*m
Pressureto achieve
rated torquepsikPa
25410
721180
1201970
1201970
3555820
3555820
1,150130
1,150130
5,500622
5,500622
5,500622
5,500622
80552
30207
80552
80552
30207
30207
Displace-mentcu. in.cu. cm
25410
2540
721180
721180
3555820
3555820
Springclosingtorquein. lbN*m
Springopeningtorquein. lbN*m
Air openingtorque @
80 psiin. lbN*m
NOTE:All of the above ratings are for normal installations. Abnormally high torque conditions may necessitate increased actuator air pressure.
15017
42548
42548
1,050119
3,300373
5,000565
30034
85096
85096
2,100237
6,600746
10,0001130
1,000113
72582
2,641298
2,016228
11,3661280
9,6661100
85096
30034
2,216250
966109
8,066911
4,666527
Air closingtorque @
80 psiin. lbN*m
Double
Acting
Models
SpringReturnModels
Pressure psikPa
Torque Output in. lbmm kg
40276
80090
60414
1,200136
120827
2,400271
80552
1,600181
100690
2,000226
Valve Size 2- 4 5 6
NOTE: All of the above ratings are for normal installations. Abnormally high torqueconditions may necessitate increased actuator air pressure.
30207
45310
60414
Pressure psikPa
NOTES1. Pressures above line for air to open, spring to close. Below line for air to close, spring to open.2. All of the above ratings are conservative for normal installations. Abnormally high torque conditions may necessitate increased actuator capability.3. Maximum actuator air pressure 120 psi, except 80 psi maximum pressure on Models 350, 590 and 590A.
30207
Double
Acting
Models50345
75517
Actuator air pressure: psi, kPa
Valve Sizes
30 (207)
40 (276)
Spring
Return
Models
Actuator air pressure: psi (kPa) (Note 1)
Valve Sizes
330
350
550
550A
590
590A
2" - 4"
2" - 6"
8"
-
8" - 10"
12"
2" - 5"
2" - 6"
8" - 10"
-
8" - 10"
12"
2" - 6"
2" - 6"
8" - 10"
12"
8" - 10"
12"
40 (276)
50 (345)
60 (414)
70 (483)
70 (483)
80 (552)
332
333
354
355
596
597A
2" - 2 1/2"
-
2" - 4"
-
-
-
2" - 2 1/2"
-
2" - 4"
-
8" - 10"
-
2" - 2 1/2"
-
2"- 4"
2" - 6"
8" - 10"
12"
2" - 2 1/2"
2" - 4"
2" - 4"
2" - 6"
8" - 10"
12"
-
7/22/2019 FMC Flowline Products and Services Catalog
52/74
ChiksanSwivel Joint Specifications
TripleStep and LongsweepSwivel Joints
SJ1A
4.38111
4.06103
6.38162
5.5140
7.9201
8.3
211
Threaded
1502 (MxF)
1502 (MxM)
Threaded
1502 (MxF)
1502 (MxM)
Threaded
1502 (MxF)
1502 (MxM)
1502 (FxF)
2002 (MxF)
2002 (MxM)
Threaded
1502 (MxF)
1502 (MxM)
2002 (MxF)
1002 (MxF)
1002 (MxM)
1502 (MxF)
7.14181
8.4213
9.01229
10.91277
14.4366
16.2
411
83.6
125.5
219.5
3616.3
6831
99
45
Size/ModelBore in. (mm)
1LS15.88 (22)
3013.6
Style 40Style 30 Style 50
6.36162
10.73273
4.38111
4.06103
7.96202
5127
6.4163
5.5140
7.28185
5.5140
5.12130
7.9201
9.69246
8.3
211
9.69246
7.28185
7.35187
9.37238
9.4239
10.74273
10.74273
10.74273
10.74273
10.9277
16.4417
21.2538
18.1
460
21.2538
7.02178
8.4213
7.96202
10.1257
9229
10.92277
10.92277
8.79223
12.42315
14.4366
20.4518
16.2
411
20.4518
167.2
2210.2
2611.8
3415.5
3716.8
5625.5
6027.2
4218.9
6228.3
10748.4
299136
161
73.3
275125
Style 20
CF
CF
CF
P506047
P510860
CF
P523525
P514100
CF
CF
CF
CF
CF
P505417
CF
CF
P516092
CF
P517048
Wtlb
kg
6101537
3259291
N/A
CF
C
top related