for over a decade, fci watermakers has been providing · for over a decade, fci watermakers has...
Post on 29-Aug-2018
234 Views
Preview:
TRANSCRIPT
For over a decade, FCI Watermakers has been providing
the industry’s finest reverse osmosis systems available.
Through state-of-the-art design and technology, superior construction and a worldwide service network, FCI produces watermakers that
offer unrivaled quality and reliability. FCI Watermakers can be found throughout the world on everything from small pleasure crafts to
large commercial vessels, oil rigs, military ships and onshore facilities such as resorts and hotels. Wherever the need for clean, fresh,
pure water arises, FCI Watermakers offers a complete line of reverse osmosis systems that are capable of fulfilling any fresh water need.
FCI Watermakers. The World’s Finest.
q u a l i t y • r e l i a b i l i t y • g u a r a n t e e d
basic applications guide
Membranes– Standard Size
– High Rejection
Exclusive U.R.O.C. Technology(Universal Reverse Osmosis Controller)
Brine and ProductFlow Sensors
NEMA 4XElectronic Enclosure
– User-Friendly Flow Chart
Standard Fresh Water Flush– Fully Automatic and Programmable
– GAC Pre-filtration– Service Valve
Four-Point VibrationIsolation Mounts
Pressure Vessels– 316SS Pressure Ports– Stress-Reducing End Plug Design
External Oil DrainService Valve
High and LowPressure Transducers– Made from 316SS
High Pressure Pump– Made from 316SS– Smooth, Quiet Operation
High Pressure Regulator– Made from 316SS
Washdown Duty Motors– Epoxy Coated
SPORTFISHING VESSEL • MID-SIZED YACHT • SUPERYACHT • SERVICE BOAT/SHIP • OFFSHORE OIL RIG/PLATFORM • ISLAND HOME • ISLAND RESORT
e x c l u s i v e t e c h n o l o g y
FCI Watermakers is dedicated to providing you with improved performance, features and dependability. In an on-going effort to stand behind our word the engineers
at FCI have developed a design that has gone far beyond its initial expectation and goals! After many years of research and product development FCI is proud to
continue offering the latest in reverse osmosis systems, and bring you leading-edge technology—the UROC. This electronic Universal Reverse
Osmosis Controller provides a user-friendly interface with customizable automatic operation for various applications and installations.
The UROC control panel exhibits a full readout of system parameters on a back-lit, 4-line display. Select
one of three Run Screens and it will give you temperature and pressure readings, feed and product TDS,
flow rates and much more. The UROC can be programmed to schedule unattended fresh water flushes. It automatically stage-starts the pumps
for load considerations, primes itself and begins to make water. The technology even allows for setting the amount of gallons produced or run time limits.
Another exclusive feature of the UROC technology is the ability to program and operate your system from a remote display or computer. Once installed the unique
desktop application provides all the operational parameters, readings and push-button controls needed to operate your watermaker. Just click the icon in the toolbar
to access the controls. A second window in the program graphs useful, real-time system data and history. This information arms you with the ability to optimize
system monitoring, schedule maintenance and determine why a fault condition may have occurred. With the UROC, watermaking has never been more simple and clear.
Monitor and access all of your system’s controls using a personal computer and FCI software or ANSI Terminal Emulator.
Additional UROC displays allow access to the same readings, set points and displayscreens as the main panel from remote locations. Run Screens will show pressure,production rates, water quality and more.
PRIME screen: When the system is started,this screen indicates the low-pressure pump is running, displays system voltage, low pressure, reject rate and feed water TDS.
RUN TIME: Push the Run Time button andinstantly get current run time, total systemhours and the number of gallons made.
INITIATION screen: When all operationparameters are in line, the high pressure pump engages, the screen will display: system voltage, high and low pressure, reject GPM and production rate.
FCI software or ANSI Terminal Emulators provide all the operational parameters,readings and push-button controls needed to operate your watermaker from a computer, including real-time system data and history.
STANDARD CAPABILITIES:
– Over current protection and monitoring
– Pretreat lock-out— land-based systems
– Pump sequence times
– PPM divert point
– Remote display enabled or view-onlypart of display or remote feature
– Amount of gallons made or run time
– Pressure trip points
– Fresh Water Flush frequency and duration
– Alarm volume and backlight level
– ANSI Terminal Emulator access
– All flow units, pressures and temperaturescan be read in english or metric units
DIGITAL DISPLAY READINGS:
– Inlet TDS, water temperature
– Low and high pressure
– Product and brine flow rates
– Total water produced each use
– Total hours run each use and for the life of the system
– Tank level control condition
– On-screen scrolling hints
SYSTEM ALARMS:
– Low and high pressure fault
– Low quality product water
– Production beyond rated capacity
– Over current condition
UNIVERSAL REVERSEOSMOSIS CONTROLLER
The Max-Q Series is among the most advanced watermakers ever manufactured. You can customize your watermaking
needs by utilizing FCI’s exclusive UROC technology from a remote location or a personal computer. Both framed and
modular configurations produce fresh, clean water with outputs of 600, 1200 or 1800 GPD. Because each component
is tested and chosen for its ability to withstand long-term operation, every Max-Q is engineered and designed to
operate in the harshest of marine environments. We have also eliminated the need for pressure gauges and flow
meters to provide years of dependable service and worry-free operation. Max-Q—The future of watermaking.
FRAMED
SERIES600—1800 GPD
47.5"
24"
30"
13"
18.7
5"
15.7
5"
FEATURES:
– State-of-the-art engineering and electronics, UROC—Universal R/O Controllerwith computer interface and multiple remotestation capability
– RS-485 connection for display and monitoring up to 4000 ft. away
– 316SS low-pressure pump with closed impeller design
– Programmable Fresh Water Flush with recurring automatic flush feature
– Digitally monitors water pressure and flow
– Quiet, efficient operation
– Conservatively rated to insure performance under varying conditions
– Commercial sized pre-filtration
– 316SS high-pressure pump and fittings
– Pressure vessels with 316SS product and pressure ports, stress-eliminating engineering with LIFETIME WARRANTY
– Washdown duty motors (epoxy coated, neoprene gaskets)
– User-friendly with ergonomicdesign for ease of use
– 4-point vibration isolation mounts for quiet operation
– 2-year product warranty
OPTIONAL EQUIPMENT / ACCESSORIES:
– Digital remote / monitoring station
– Filter replacement kit
– Ultra-violet sterilizer
– Media / Iron removal filters
– Granular-activated charcoal filters
LOW PRESSURE PUMP PRE-FILTER ASSEMBLY FRESH WATER FLUSH HIGH PRESSURE PUMP 2.5” PV ASSEMBLY
MODULAR
MASTER FLOW CONTROL PANEL
framed
MQ626SMQ1226SMQ1826S
modular
MQM626SMQM1226SMQM1826S
gpd/lpd
600/22701200/45411800/6811
hp
2.52.52.5
kw
2.292.292.29
voltage
120/220/380, 1-ph, 3-ph, 50/60 Hz120/220/380, 1-ph, 3-ph, 50/60 Hz120/220/380, 1-ph, 3-ph, 50/60 Hz
gph/lph
25/9550/18975/284
NOTE: Specifications based on 77ºF; 32,000 TDS Feed; and, 820psi at 60 Hz 50 Hz operation will affect system performanceContact factory for other voltages. DISPLAY PANEL
9"
7" 15.5"
11"
7"21.5"
19"
6"11"
12.5
"
6" 10"
10.7
5"
10"24"
4"12"
47.5"
6.75
"
5"9.5"
WALL-MOUNT SERIESMODULAR SERIESHORIZONTAL SERIES
made to fit your water making needs and space
When your needs demand continuous-duty, commercial grade watermakers, the FCI Neptune Series of systems is the
answer. These efficient units deliver great volumes of water with capacities of 1200–9500 GPD and are ideal for large
yachts, commercial vessels, island homes, oil platforms, hotels or wherever clean, pure, fresh water is needed. The
Neptune Series employs our exclusive UROC technology providing advanced, total control and user-friendly system
customization. The commercial features also include built-in cleaning ports on the framed units, washdown duty
motors, 316SS high and low-pressure pumps and commercial sized pre-filters. Available in three configurations the
Neptune Series ensures quality, dependability and years of worry-free operation wherever you may be.
HORIZONTAL SERIES3100—9500 GPD
FEATURES:
– Four customizable configurations: Vertical Framed, Horizontal Framed, Wall-Mount and Modular units
– State-of-the-art engineering
– UROC—Universal Reverse OsmosisController with computer interface
– 316SS low-pressure pump with closedimpeller design (allows for 50% morepressure with the same HP)
– 316SS high-pressure pump
– Multiple station capabilities
– Programmable Fresh Water Flush with recurring automatic flush feature
– Commercially designed to operate 24/7
– Pressure vessels with 316SS pressure and product ports, stress-eliminating engineering
– 80 sq. ft. of commercial pre-filtration
– Conservatively rated to eensure performance under varying conditions
– Built-in cleaning ports
– Washdown duty motors (epoxy coated, neoprene gaskets)
– 4-point vibration isolation mounts
– One year warranty
OPTIONAL EQUIPMENT / ACCESSORIES:
– Digital remote / monitoring station
– Filter replacement and spare parts kits
– Ultra-violet sterilizer
– Media / Iron removal filters
– Granular-activated charcoal filters
– System soft start
horizontal
NH31263SNH43263SNH55263SNH75263SNH95263S
gpd
31004300557575009500
m3
1216212836
hp
7.57.57.51010
kw
6.486.486.488.398.39
voltage
220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz
gph/lph
129/489179/678229/867313/1183396/1498
NOTE: Specifications based on 25ºC; 35,000 TDS Feed; and, 820psi at 60 hertz Contact factory for other voltages.
HORIZONTAL
47.50"
94.59"
21.5
0"
29.1
1"
39.7
2"
94.59"
LOW PRESSURE PUMP HIGH PRESSURE PUMP 4” PV ASSEMBLY
The Neptune Wall-Mount Series combines modular flexibility with framed unit convenience. Our engineers spared no
details in the design—adding pre-filters that slide out and lock back into place for easy maintenance. When your
water demands are high and space is an issue, the Neptune Wall-Mount and Modular Series are a perfect fit.
WALL-MOUNT
WALL-MOUNT & MODULAR SERIES1200—5500 GPD
31.50"
11.63"
41.8
0"
11"
8" 16"
15.8
"
18.4" 33.1"
15"
49.61"
7.59"
MASTER FLOW CONTROL PANEL
LOW PRESSURE PUMP FRESH WATER FLUSH HIGH PRESSURE PUMP 2.5” PV ASSEMBLY 4” PV ASSEMBLYPRE-FILTER ASSEMBLY
MODULAR
Additional Display Panels and FCI’s exclusive UROC technologyallow you to monitor, access andprogram the system from a remotelocation or personal computer.
wall-mount
–––NWM31263SNWM43263SNWM55263S
modular
NM12263SNM18263SNM24263SNM31263SNM43263SNM55263S
gpd
120018002400310043005500
m3
579121621
hp
3357.57.57.5
kw
3.053.054.586.486.486.48
voltage
220/380, 3-ph, 50/60 Hz220/380, 3-ph, 50/60 Hz220/380, 3-ph, 50/60 Hz220/380, 3-ph, 50/60 Hz220/380, 3-ph, 50/60 Hz220/380, 3-ph, 50/60 Hz
gph/lph
50/18975/284100/378129/489179/678229/867
NOTE: Specifications based on 77ºF; 35,000 TDS Feed; and, 820psi at 60 Hz Contact factory for other voltages.
14"
11"30.5"
11"
8" 16"
19.5
"
12"21
"
13.5
"
9" 15"
15.8
"
18.4" 33.1"
4"18"
47.5"
7.5"
6"
30"
51"
SERIES250—1800 GPD
The Aquamiser Plus Series offers programmable settings and remote display capability through an advanced
control system. This full-featured affordable solution is ideal for smaller water production needs. With outputs of
250–1800 GPD the Aquamiser Plus Series will provide the safety and controls needed to operate both dependably
and efficiently. The Aquamiser Plus is available in framed and modular configurations to be utilized in tight spaces
and bulkheads. However, despite its small size, the extensive controls include a fully automatic Fresh Water Flush
System for unattended maintenance. Scheduled flushes, once a week or every two weeks, will help maintain and keep
your watermaker fresh and ready for your next voyage.
FRAMED
600-800 GPD units are 47.5” wide with PV Assemblies
14.7
5"
21.5"
17"
21.5
"
24.5"
30"
STANDARD FEATURES:
– Staged starting of motors
– Timed start-up (Prime, Init, Run)
– TDS monitoring of product water
– Automatic diverting of waterabove 500 PPM
– Programmable Fresh Water Flush for automatic and weekly operation; or, convenient one-touch button for manual operation
– Overpressure protection (HP fault)
– Loss of Prime/Fouled Filter detection (LP fault)
WITH REMOTE DISPLAY:
– Remote system control up to 150’ away
– Readout of product TDS
– Automatic tank level controls
– Programmable times/set points and display settings
OPTIONAL EQUIPMENT / ACCESSORIES:
– Filter replacement kit
– Pocket PPM meter
– Ultra-violet sterilizer
MASTER FLOW CONTROL PANEL FRESH WATER FLUSH HIGH PRESSURE PUMP 2.5” X 21” PV ASSEMBLY250 – 500 GPD UNITS
2.5” X 40” PV ASSEMBLY600 – 1200 GPD UNITS
PRE-FILTER ASSEMBLY
REMOTE DISPLAY Panel allows you tomonitor critical conditions of operationand execute fresh water flushes.
MODULAR
CONTROL PANEL LOW PRESSURE PUMP
framed
A216SA516SA616SA816SA1226SA1826S
modular
AM216SAM516SAM616SAM816SAM1226SAM1826S
gpd/lpd
250/946500/1892600/2270800/30271200/45411800/6811
hp
1.51.51.51.52.52.5
kw
1.521.521.521.522.292.29
voltage
120/220, 50/60 Hz120/220, 50/60 Hz120/220, 50/60 Hz120/220, 50/60 Hz120/220, 50/60 Hz120/220, 50/60 Hz
gph/lph
10/3921/7925/9533/12650/18975/284
NOTE: Specifications based on 77ºF; 32,000 TDS Feed; and, 820psi at 60 Hz 50 Hz operation will affect system performanceContact factory for other voltages.
14.5
"
7.4" 10.4"
12.5
"
5.2" 13.6"
10.6
3"
10.2"20"
4"
8.5"
28.25"
4"
8.5"
47.5"
9.25
"
7.11" 15.25"
8.5"
6.55" 6.75"
12.5"6" 10"
t e s t e d. r e l i a b l e. p r o v e n.
SERIES10,000—22,500 GPD
SERIES11,000—43,000 GPD
The Poseidon Series is the industry’s choice when commercial applications call for substantial capacities of fresh
water. With production ranges from 10,000–22,500 GPD, the Poseidon Series is commonly used in applications
such as: offshore oil platforms, petroleum support vessels, commercial ships, military vessels, mid-sized hotels,
island applications and various remote necessities.
The mainstay of every desalinator by FCI Watermakers manifests in our high output machines. Unrivaled quality
and superior manufacturing techniques are proven to be reliable in the most demanding marine applications.
For the ultimate range in production, the Titan Series expands output from 11,000–43,000 GPD. These units
are a dependable solution for a variety of commercial applications: oil and gas development operations, floating
petroleum production platforms, and extreme offshore exploration; freighters and military applications; grand
hotels and commercial real estate developments; island resorts and distant retreats; localized municipalities and
numerous circumstances where extreme volumes of fresh water are needed.
POSEIDON & TITAN SERIES FEATURES:
– State-of-the-art engineering
– UROC—Universal Reverse Osmosis Control system
– Computer interface with complete system readouts
– 316SS high-pressure pump
– Multiple display station capabilities
– Built-in media filtration
– 120 sq. ft. of 5 micron pleated filtration
– Pulsation dampener
– Timing belt drive system
– Vibration isolation
– Automatic Flush system
– TEFC Motors
– Thermal overload protection
– Flow meters and flow sensors
– 316SS pressure transducers
– Pretreatment lockout
– One year warranty
– Complete exploded view manuals
– One-piece skid mount design
OPTIONAL EQUIPMENT / ACCESSORIES:
– Raw water strainer
– Feed water pressure regulators
– Feed water relief valves
– Feed water feed pump
– Pretreatment system
– Post treatment systems
– Custom system designs
– System soft start
model
P38463SP47463SP61463SP72263SP85463S
gpd
1000012500160001900022500
m3 (h/d)
2/382/473/613/724/85
hp
2020202020
kw
15.2615.2615.2615.2615.26
voltage
220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz
gph
417521667792938
model
T42463ST72463ST91463ST114463ST131463ST146463ST163463S
gpd
11000190002400030000345003850043000
m3 (h/d)
2/423/724/915/1145/1316/1467/163
hp
40404040404040
kw
30.5330.5330.5330.5330.5330.5330.53
voltage
220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz220/380/460, 3-ph, 50/60 Hz
gph
45879210001250143816041792
NOTE: Specifications based on 77ºF; 35,000 TDS Feed; and, 820psi at 60 Hz
NOTE: Specifications based on 77ºF; 35,000 TDS Feed; and, 820psi at 60 Hz
Contact factory for other voltages.
Contact factory for other voltages.
a c c e s s o r i e s
FCI Watermakers carries a complete line of replacement parts, accessories and optional
equipment that maintain the quality, reliability and efficiency that you have come to
know and trust in FCI. So, the next time you perform routine maintenance, or would like
to upgrade your Reverse Osmosis system, look to FCI Watermakers. The World’s Finest.
Granular-Activated Charcoal Filtersare great for post-tank filtration,and remove particulate, chlorineand other contaminants found inyour fresh water holding tank.
Multi-media and Iron Removal Filters remove particulate or iron from the feed waterstream. Filter includes valve tree assembly andstainless steel differential gauges.
FCI carries a complete line of replacement parts whichinclude filters, membranes, hoses, fittings, spanners,o-rings and more.
Stainless Steel, Ultra-Violet Sterilizers provide 99.8%sterilization of bacteria and micro-organisms in water.Available in a variety of flow rates.FCI Watermakers | Santa Ana, CA 92707 | T 714.850.0123 F 714.850.0955 | www.fciwatermakers.com
©2008 FCI WATERMAKERS
Additional Displays enable you to program and access the system from a remote location.
top related