g&h_ specification of multiflo pump australia
Post on 10-Feb-2018
626 Views
Preview:
TRANSCRIPT
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
1/38
MULTIFLO
AUSTRALIAtyLtd
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
2/38
MULTIFLOoffers a high quality range of products . These include theMULTIFLOrange of vacuum primed diesel and electric driven pumpsets that can be custom-built to ensure the very best performance foryour operation, and survive under the toughest of operating condit ions.
MULTIFLO Pump Units were first produced in 1976, designed andmanufactured to provide a better and more reliable alternative to efficientlypump clean the open cut coal mining pits at the time. To secure a market
place, formation of a pump hire division was put in place using products exworks, this enabled the company to be actively involved with development andrequirements of setting in place mine pit dewatering systems in the open cutmining area.
Having achieved this mark, MULTIFLO entered into the open cut miningindustry with a range of diesel and electric driven vactronicTM vacuum primedpump sets capable of pumping not only water against high head situations, butalso large quantities of slurry from the open pits.
Further information on the company and products may be obtained bycontacting the Caloundra office, thus enabling our office to connect you withthe MULTIFLO representative best able to work with you on your project.
MULTIFLO HEAD OFFICEMultiflo Australia Pty Ltd4 Daniel Street, Caloundra QLD 4551P O Box 3580, Caloundra D.C. QLD 4551AUSTRALIAPh: 07 5491 2877Fax: 07 5491 2805Email: multiflo@multiflo.com.auWebsite: www.multiflo.com.au
Page 1 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
3/38
Model: M/FV-360S-SSOwner: PT Petrosea
Model: MFC-385
Owner: Coateson site
Page 2 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Model: MFV-W390SOwner: Kelian
Model: MFV-360BP
Owner: Pama
Model: MFV-W390BPOwner: Blair Athol
Model: MFV-W390BP-CH
Owner: KPC
Model: MFC-420BOwner: Banpu
Model: MFC-385Owner: Coates Shorco Sykes
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
4/38
GENERAL INFORMATION CONSTRUCTION
100 x 100 single stage centrifugal Pump Casing - Cast Iron
Type 120MS Impeller - Stainless Steel
Frame Size - 2A Shaft - 431 Stainless Steel
Seal - Mechanical ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3024 - 23 kW Maximum Flowrate - 60 litres per second
Deutz F3L1011F - 23 kW Shutoff Head - 36 metres
Hatz 2L41C - 18.8 kW (Max 1800RPM)
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1135 mm
Length - 2250 mm
Width - 1000 mm
Weight Dry - 1140 kg
Weight Wet - 1300 kg
Fuel Capacity - 160 litres
MODEL MFC-120
Page 3 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
5/38
MUFO1
PRORMANC
Page 4 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
6/38
GENERAL INFORMATION CONSTRUCTION
150 x 150 single stage centrifugal Pump Casing - Cast Iron
Type 140MS Impeller - Stainless SteelFrame Size - 4A Shaft - 431 Stainless Steel
Seal - Gland Packing or Mechanical Seal ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3054 - 49 kW Maximum Flowrate - 80 litres per second
Deutz F3L912 - 30 kW (Max 1800RPM) Shutoff Head - 50 metres
Hatz 3L41C - 30 kW (Max 1800RPM)
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1470 mm
Length - 2800 mm
Width - 1132 mm
Weight Dry - 1650 kg
Weight Wet - 2230 kg
Fuel Capacity - 580 litres
MODEL MFC-140
Page 5 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
7/38
MUFO1
PRORMANC
Page 6 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
8/38
Page 7 Multiflo Pump Products Catalogue
GENERAL INFORMATION CONSTRUCTION
150 x 150 single stage centrifugal Pump Casing - Cast IronType 160 Impeller - Stainless Steel
Frame Size - 4A Shaft - 431 Stainless Steel
Seal - Gland Packing or Mechanical Seal ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3054NA - 51 kW Maximum Flowrate - 90 litres per second
Cummins B3,3T - 49 kW Shutoff Head - 55 metres
Deutz F4L912 - 41 kW (Max 1800RPM)
Hatz 4L41C - 42 kW (Max 1800RPM)
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1470 mm
Length - 2800 mm
Width - 1132 mm
Weight Dry - 1650 kg
Weight Wet - 2230 kg
Fuel Capacity - 580 litres
MODEL MFC-160
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
9/38
Page 8 Multiflo Pump Products Catalogue
MUFO1
PRORMANC
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
10/38
GENERAL INFORMATION CONSTRUCTION
200 x 200 single stage centrifugal Pump Casing - Cast Iron
180G Impeller - Stainless Steel
Frame Size - 5AA Shaft - 431 Stainless Steel
Gland Conventional packed, oil lubricated ** For aggressive water applications, all wetted
Using a controlled drip feed system parts are available in stainless steel
Passage Size - 25 mm
ENGINE OPTIONS PERFORMANCE
Caterpillar 3056T - 110 kW Maximum Flowrate - 140 litres per second
Cummins 6BTA5.9 - 101 kW Shutoff Head - 55 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1675 mm
Length - 3450 mm
Width - 1495 mm
Weight Dry - 2900 kg
Weight Wet - 4000 kg
Fuel Capacity - 1100 litres
MODEL MFC-180
Page 9 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
11/38
MUFO1
PRORMANC
Page 10 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
12/38
Page 11 Multiflo Pump Products Catalogue
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - Cast Iron
Type 290MS Impeller - Stainless Steel
Frame Size - 5AA Shaft - 431 Stainless Steel
Seal - Gland or Mechanical
[Silicon Carbide/Tungsten] ** For aggressive water applications, all wetted
Passage Size - 45 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3056TA - 110 kW Maximum Flowrate - 103 litres per second
Cummins 6BTA5.9 - 101 kW Shutoff Head - 85 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 1675 mm
Length - 3450 mm
Width - 1495 mm
Weight Dry - 2900 kg
Weight Wet - 4000 kg
MODEL MFC-290
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
13/38
MUFO2
PRORMANC
Page 12 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
14/38
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - Ultrachrome 28% Cr (A49)
Type 345G Impeller - Ultrachrome 28% Cr (A49)
Frame Size - FF Shaft - CS 1045 Carbon Steel
Gland Conventional packed, oil lubricated Sleeve Fully Hardened Type 420C
Using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size 140 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3406TA - 328 kW Maximum Flowrate - 260 litres per second
Cummins N14-450 - 317 kW (Max 1800 RPM) Shutoff Head - 106 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 3100 mm
Length - 5800 mm
Width - 2000 mm
Weight Dry - 9680 kg
Weight Wet - 12000 kg
Fuel Capacity - 2320 litres
MODEL MFC-345MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Page 13 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
15/38
MUFO3
PRORMAN
C
Page 14 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
16/38
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - T220 Grey Cast Iron
Type 360G Impeller - 316 Stainless Steel
Frame Size - 6A Shaft - 1040 Shaft Steel
Gland Seal Conventional packed, oil lubricated Shaft Sleeve 431 Stainless Steel
using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size 45 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3126TA - 166 kW Maximum Flowrate - 100 litres per second
Cummins 6CTA8.3 - 157 kW Shutoff Head - 126 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 2460 mm
Length - 5650 mm
Width - 1800 mm
Weight Dry - 6500 kg
Weight Wet - 7800 kg
Fuel Capacity - 1800 litres
MODEL MFC-360
Page 15 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
17/38
MUFO3
PRORMANC
Page 16 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
18/38
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - T220 Cast Iron
Type 380G Impeller - 316 Stainless Steel
Frame Size - 6A Shaft - CS1040 Carbon Steel
Gland Seal Conventional packed, oil lubricated Sleeve 431 Stainless Steel
Using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 45 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar C9 @ 1700 RPM B Rating - 219 kW Maximum Flowrate - 155 litres per second
Cummins M11-350 @ 1700 RPM Shutoff Head - 110 metres
Water Management Rating - 229 kW
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 2750 mm
Length - 5650 mm
Width - 1800 mm
Weight Dry - 6500 kg
Weight Wet - 7800 kg
Fuel Capacity - 1800 litres
MODEL MFC-380
Page 17 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
19/38
Page 18 Multiflo Pump Products Catalogue
MUFO3
PRORMANC
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
20/38
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - T220 Cast Iron
Type 385G Impeller - 316 Stainless Steel
Frame Size - 6A Shaft - CS1040 Carbon Steel
Gland Seal Conventional packed, oil lubricated Sleeve 316 Stainless Steel
Using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 45 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3406TA - 328 kW Maximum Flowrate - 160 litres per second
Cummins N14-450 - 317 kW Shutoff Head - 130 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 3030 mm
Length - 5750 mm
Width - 2100 mm
Weight Dry - 5100 kg
Weight Wet - 6500 kg
Fuel Capacity - 1800 litres
MODEL MFC-385
Page 19 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
21/38
Page 20 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
MUFO3
PRORMANC
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
22/38
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - Ultrachrome 28% Cr (A49)
Type 8/6 FF-HX Slurry Pump Impeller - Ultrachrome 28% Cr (A49)Frame Size - FF Shaft - CS 1045 Carbon Steel
Gland Seal - Conventional packed, oil lubricated Sleeve Fully Hardened Type 420C
using a controlled drip feed method. ** For aggressive water applications, all wetted
Passage Size 65 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE
Caterpillar 3406TA - 328 kW Maximum Flowrate - 190 litres per second
Cummins N14-450 - 317 kW Shutoff Head - 120 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 2998 mm
Length - 6096 mm
Width - 2032 mm
Weight Dry - 9800 kg
Weight Wet - 13900 kg
Fuel Capacity - 4000 litres
MODEL MFC-390
Page 21 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
23/38
MUFO3
PRORMANC
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Page 22 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
24/38
GENERAL INFORMATION CONSTRUCTION
200 x 150 single stage centrifugal Pump Casing - Ultrachrome 28% Cr (A49)
Type 8/6 FF-HX Slurry Pump Impeller - Ni-Cr-Mo Steel (A25)
Frame Size - FF Shaft - CS 1045 Carbon Steel
Gland Seal - Conventional packed, oil lubricated Sleeve Fully Hardened Type 420C
using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 50 mm parts are available in stainless steel
ENGINE PERFORMANCE
Caterpillar 3412 DITTA Maximum Flowrate - 273 litres/second
Shutoff Head - 150 metres
DIMENSIONS/CAPACITIES/WEIGHTS
Height - 3378 mm
Length - 7500 mm
Width - 2400 mm
Weight Dry - 12260 kg
Weight Wet - 16260 kg
Fuel Capacity - 4012 litres
MODEL MFC-420
Page 23 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
25/38
Page 24 Multiflo Pump Products Catalogue
MUFO4
PRORMANC
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
26/38
Page 25 Multiflo Pump Products Catalogue
GENERAL INFORMATION CONSTRUCTION
Two x 150 x 100 single stage centrifugal pumps Pump Liner - Wear Resistant White Iron
Type Slurry AH Impeller - Duplex Stainless Steel
Frame Size - RYFC Shaft - CS1040 Carbon Steel
Gland Seal - Conventional packed, oil lubricated Sleeve Stainless Steel
using a controlled drip feed system. ** For aggressive water applications, all wetted
Passage Size - 32 mm parts are available in stainless steel
ENGINE OPTIONS PERFORMANCE - Series Configuration
Caterpillar C15 - 336 kW Maximum Flowrate - 120 litres/second
Caterpillar C16 - 410 kW Shutoff Head - 250 metres
DIMENSIONS/CAPACITIES/WEIGHTS PERFORMANCE - Parallel Configuration
Height - 2940 mm Maximum Flowrate - 240 litres/second
Length - 5500 mm Shutoff Head - 125 metres
Width - 2100 mm
Weight Dry - 9800 kg
Weight Wet - 12400 kg
Fuel Capacity - 2600 litres
MODEL MFVM-790
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
27/38
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
28/38
Page 29 Multiflo Pump Products Catalogue
SPECIFICATIONS
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Page 27 Multiflo Pump Products Catalogue
SPECIFICATIONS FOR A MULTIFLO DIESEL DRIVEN,VACUUM PRIMED, HIGH PERFORMANCE PUMP UNIT.
ENGINE CONTROLThe control panel is manufactured fromstainless steel and is fitted with thefollowing equipment: Hour Meter
Engine Start Switches Vactronic Control Module Run Relays Circuit Breakers
ELECTRICAL SYSTEMThe engine has a 12 or 24 volt start andcharge system and the pump unit isfitted with one or two 12 volt Caterpillarbatteries. The electrical system featuresthe following: Circuit breakers in place of fuse
holders Wiring mechanically protected by
Adaptaflex PAF21 conduit Wiring to A.S. 3000
ENGINE PROTECTIONElectrical safety shutdown system for: High engine temperature Low oil pressure
DRIVE COUPLINGFenner flexible tyre type couplingcomplete with Taper-Lock bushes.
SUCTION LIFTThe unit has a N.P.S.L. (nett positivesuction lift) of 9 metres. To obtainmaximum performance it is advisable toinstall the pump unit as close as ispractical to the level of fluid beingpumped.
AUTO VACUUM PRIME SYSTEMVactronic electronically controlled, solidstate, fully sealed system. Vacuumcontrol operates via activation of asensor probe located in the vacuum tank
chamber. Vactronic system eliminatesall mechanically moving parts in thevacuum tank chamber (i.e. float ball andvalves). The unit is fitted with anon-return valve at the discharge pointof the pump and does not require a footvalve for priming.
BARE SHAFT PUMP SAFETY SHUT-DOWNAutomatic engine shutdown after2-8 minutes of operation without fluids.
Shut down is activated by anothersensor probe (delay timer preset to 6minutes). System acts as safetyprotection for both the bare shaft pumpand mechanical seal. The pump unitmay be used to operate under snoreconditions.
HIGH LIFT VACUUM TANKThe vacuum tank is manufactured from6 mm mild steel incorporating a waterand air separator chamber, designed to
give maximum air separation, allow-ing an uninterrupted flow to the bareshaft pump. The vacuum tank is alsocomplete with a vacuum water trap andback up Krundimendt Safety CheckValve to give maximum protection to thevacuum pump under all operatingconditions.
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
29/38
SPECIFICATIONSContinued
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Page 28 Multiflo Pump Products Catalogue
SPECIFICATIONS FOR A MULTIFLO DIESEL DRIVEN,VACUUM PRIMED, HIGH PERFORMANCE PUMP UNIT.
VACUUM PUMPThe vacuum pump is a 37 C.F.M.air-cooled rotary vane type fully sealedunit - self contained oil lubrication with a
two litre capacity. Operating at 1800RPM maximum and driven by two "Z"section vee belts from the pump inputshaft. The vacuum pump is fitted with a12 or 24 volt solenoid valve to close offflow to the vacuum pump after priming.
The Vactronic control module controlsthe opening and closing of the valve.
or
The vacuum pump is a 58 C.F.M.
air-cooled rotary type fully sealed unit -self contained oil lubrication with a 2 litrecapacity. Operating at 1800 RPMmaximum and driven by two "B" sectionvee belts from the pump input shaft. Thevacuum pump is fitted with a 12 voltsolenoid valve to close off flow to thevacuum pump after priming. TheVactronic control module controls theopening and closing of the valve.
PAINTSteel PreparationAll exterior steel work is abrasive blastcleaned in accordance with A.S.1627
1974, Part 4 - Class 2 1/2.
The first coat of paint is InternationalIntergard 475 HSE High Build Epoxywith a thickness of 150-250 microme-ters dry. The second and finish coat isInternational Interfine 629 with afinished thickness of 50-75 micrometersdry. (Total finished thickness 200-325micrometers).
Colour to be Caterpillar Yellow
STEEL/WELDING STANDARDAll steel work is to A.S.1204 grade, 250U.N.O. All welds are minimum 6 mmcontinuous fillet, in accordance withA.S.1554, Category S.P.
PROOF PLATESecurely attached alloy plate statingUnit Weight.
MULTIFLO AUSTRALIA PTY LTD is the owner of propertiesincorporating intellectual design data, specifications andinstructions compiled in this presentation. They must not beused, reproduced or copied in whole or in part, in any form or byany means, nor may the information therein contained, which isconfidential to MULTIFLO AUSTRALIA PTY LTD be disclosedto any person, without the prior written consent of MULTIFLO
AUSTRA LIA PTY LTD.
This presentation has been delivered and received on theexpress conditions that it may be used only for the specificpurpose for which it has been provided, may not be used in anyway which may injure or cause loss directly or indirectly toMULTIFLO AUSTRALIA PTY LTD or any related corporationand will be returned to MULTIFLO AUSTRALIA PTY LTDimmediately on completion of the task for which it has beenprovided, or on demand.
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
30/38
Trailer Chassis
The trailer chassis is designed to be bolted on to any of the Multiflo pump units.
The trailer chassis is designed to be towed with the correct size vehicle to suit the
weight and size of the pump unit. The trailer chassis enables the pump unit to bemoved from one pumping location to another with ease.
The trailer chassis is fitted with the following items:-
Dual heavy duty axle
The correct wheels to suit the size and weight of the pump unit
Brakes can be electrical or mechanical (optional)
Tow hitch to suit customer requirements
Page 29 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
31/38
The heavy duty skid chassis is designed to be bolted on to any of the Multiflo pumpunits.
The skid chassis is designed to be pushed around with bull dozers or excavators. Theskid runners enable pump units to be mounted on the heavy dutychassis and be towed from one pumping location to
another on minesite.
The heavy duty skid chassis is fittedwith the following items:-
Runners fabricated from rectangular
hollow section (RHS)
Four lifting points
Two tow lugs
Supa alloy tow chains
Replaceable wear plate
Heavy duty pushbar
Heavy Duty Skid Chassis
Page 30 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
32/38
Skid Mounted Pontoon
The heavy duty skid mounted pontoon unit is designed to float any of the Multiflo pumpunits. The pontoon is designed to be pushed with bull dozers or excavators.
The skid runners enable pump units mounted on the heavy duty pontoon to be towedfrom one pumping location to another on minesite.
The heavy duty skid mounted pontoon is fitted with following items:-
Skid runners fabricated from rectangular hollow section (RHS)
Four lifting points
Two tow lugs
Supa alloy tow chains
Replaceable wear plate
Heavy duty pushbar
Page 31 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
33/38
Suction Boom KitThe Suction Boom is designed to control the pump unit suction hose while pumping andwhen moving from one pumping location to another on mine site.
The boom is completely hot dip galvanised and is fitted with Supa Alloy support chainscoupled to the chassis. The winch is fixed to a holding point on the chassis and suppliedwith 16 metres of 6mm wire rope.
Page 32 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
34/38
Page 33 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
MFVC-385 Stinger Pump UnitThe stinger was developed to meet the unique needs of a mine situated in an ancient volcano crater. They
needed a custom built pump unit designed to launch and retrieve a pontoon mounted pump unit in their
hostile, flood prone environment.
The location for the pumps is in the bottom of the pit, where the acidic water temperature exceeds 80 C
making operator
exposure to the water extremely harmful.
To meet this need the stinger was developed to enable user friendly
operation of the pump with no operator contact with the water through the use of an automatic hydraulically
driven pontoon pump mounted well above the pit.
Designed for operator safety
One person operation to prepare for deployment and retrieval
Side access walkways along entire length of skid base complete with handrails at the rear of the unit
Special Projects
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
35/38
Page 34 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Model: MFV-160C
Owner: PT ArutminSenakin
Model: MFV-W420-BP
Owner: PT KelianModel: MEFP-420
Owner: Saraji Mine
Model: MFV-140S
Owner: PT Indo Muro
Model: MFV340BOwner: PT Pamapersada
Model: MCL-140
Owner: Coates Shorco Sykes
Model: ME-W420POwner: Gold Ridge Mine
Model: MFC-290Owner: CAT Rental Store
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Model: MEFP-420
Owner: Saraji Mine
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
36/38
Page 35 Multiflo Pump Products Catalogue
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
37/38
Page 36 Multiflo Pump Products Catalogues
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Revised 04/07
MULTIFLO PUMPSByMULTIFLO AUSTRALIAPty. Ltd.
Multiflo Head OFFICE
MULTIFLO AUSTRALIA PTY LTD
Address: 4 Daniel StreetCaloundra 4551 QueenslandAUSTRALIA
Postal Address: P O Box 3580Caloundra Delivery CentreCaloundra 4551 QueenslandAUSTRALIA
Telephone: 617 5491 2877
Fax: 617 5491 2805
Email: multiflo@multiflo.com.au
Website: www.multiflo.com.au
Contacts: Mr Peter Smit General Manager - Manufacturing / Sales
Mr Bryan Fulwood General Manager - Development
Mr Geoff Way Operations Manager
Mr Brad Fleming Technical Advisor
Miss Sandra Bayley Accounts Administrator
-
7/22/2019 G&H_ Specification of MultiFlo Pump Australia
38/38
Disclaimer: Multiflo Australia Pty Ltd will not be liable for any claims or damages arising out of or in
top related