green house monitoring system based arduino uno

GREEN HOUSE MONITORING SYSTEM BASED ARDUINO UNO

GREEN HOUSE MONITORING SYSTEM BASED ARDUINO UNO

• HELMI NUR M.Z.S (NIM 151611012)• RADEN LUQMANNULHAKIM (NIM 151611022)• SULMA MAHARDIANI (NIM 151611028)

D3-TEKNIK PENDINGIN DAN TATA UDARAREFRIGERATION AND AIR CONDITIONING

ENGINEERINGPOLITEKNIK NEGERI BANDUNG

DEFINITIONGREEN HOUSE is a building, room, or area, usually chiefly of glass, in which the temperature is maintained within a desired range, used for cultivating

tender plants or growing plants out of season.

DEFINITION

MONITORING is the regular observation and recording of activities taking place in a project or program. It is a process of

routinely gathering information on all aspects of the project.

DEFINITIONGREEN HOUSE MONITORING SYSTEM is a system which is oversee the aspect of a green house, such

as a temperature, humidity, gasses and the light intensity to keep the green house in the ideal

condition

FEATURES

• Detect temperatures• Detect humidity levels• Detect sunlight and artificial light• Detect carbon dioxide

BENEFIT

• Define specific greenhouse conditions • Control environmental conditions within

greenhouse• Eliminates risk of greenhouse not being

maintained at specific environmental conditions due to human error

Green House Standard ASHRAE

Temperature : 25°C

Humidity : 60-70%

CO2 : 300 ppm

light intensity : 32.000 lux

Arduino LCD DHT11 LDR MQ135

PCB LED BUZZER WIRE HP Keypad

TOOLS

MIND MAPPING

DHT11Temperature&humidity sensor

MQ135C02 SENSOR

LDRLIGHT SENSOR

LCD

DAQ PLX

PROCEDURE1. Prepare the components

2. Arrange the components into PCB by using the wire, corresponding wiring with the pictures that guide to connect into arduino

3. Connect Arduino into PC which have arduino application

4. Compile sketch, make sure that sketch don’t have any error

5. upload sketch to the arduino

6. See the value of measurand on the serial monitor, or on the LCD

DESIGN

RESULT