gsm-p&o_i&ii_02_200909 fundamentals and design of planning simulation
Post on 10-Dec-2015
7 Views
Preview:
DESCRIPTION
TRANSCRIPT
GSM-P&O_I&II_02_200909 Fundamentals and Design of Planning
Simulation
ZTE University
GSM BSS Team
Objective
At the end of this course, you will be able to:
Learn the fundamentals of network planning
Learn the fundamentals and operating process
of simulation
Learn the propagation model and principle
Learn the map knowledge
Content
Chap.1: Map Knowledge
Chap.2: Network Planning Flow
Chap.3: Information Collection and Requirement Analysis
Chap.4: Link Budget
Chap.5: Common Propagation Model and Parameters
Chap.6: Capacity Planning
Chap.7: Antenna Installation and Debugging
This chapter introduces the information about map. For
specific sections, refer to as follows:
Chap.1: Map Knowledge
Overview of Digital Map Map Classification Map Quality Assessment Criteria Digital Map Composition Terminologies Related to Maps Map Elements
This chapter introduces the network planning flow by using
chart and descriptions. For specific sections, refer to as
follows:
Chap.2: Network Planning Flow
Information Collection and Research & Analysis of Network Planning
Survey, Site Selection and Radio Wave Test Network Capacity Planning Radio Coverage Design and Coverage Prediction Frequency Planning and Interference Analysis Radio Resource Parameter Design
Network planning and optimization process
Chap.2: Network Planning Flow
Work in this Phase Information Collection Frequency Sweeping Test
Chap.3: Information Collection and Requirement Analysis
For specific sections, refer to as follows:
Purposes of Link Budget Downlink Budget Uplink Budget Calculation of Uplink and Downlink Balance Equivalent Maximum Allowable Path Loss
Chap.4: Link Budget
For specific sections, refer to as follows:
Okumura-Hata Model Cost231 Model Common Expression of the Okumura-Hata and COST2
31 Models Standard Universal Model (AIRCOM Expression) Propagation Model Test and Correction
Chap.5: Common Propagation Model and Parameters
For specific sections, refer to as follows:
Basic Concepts Capacity Predication Capacity Planning Process Channel Capacity Planning Optimization of Capacity Planning Improvement of Network Capacity Location Area Planning
Chap.6: Capacity Planning
For specific sections, refer to as follows:
Coverage Simulation Layered Coverage Coverage Methods in Special Districts
Chap.7: Coverage Planning
For specific sections, refer to as follows:
Analysis of frequency reuse and interference models based on ideal cellular structure
Common anti-interference technologies
Chap.8: Frequency Planning
This chapter describes the following contents:
Cellular Structure Creation Rule Interference Models Frequency Reuse Technology and Interference Analysi
s Frequency Reuse in Groups Cell Splitting Common Anti-Interference Technologies Summary of GSM Frequency Allocation Neighbor Cell Planning
Chap.8: Frequency Planning
For specific sections, refer to as follows:
Overview Information Collection and Data Sorting Engineering Data Creation Presetting Site Layout Coverage Simulation Interference Simulation Report Output Other Auxiliary Settings
Chap.9: Wireless Network Planning Simulation
For specific sections, refer to as follows:
Engineering Parameter Planning Radio Parameter Planning
Chap.10: Network Parameter Planning
For specific sections, refer to as follows:
top related