gujarat water supply sewerage board psus as approved ... · approval over) 4 m/s. reliance...

GUJARAT WATER SUPPLY & SEWERAGE BOARD

Govt. PSUs as Approved Vendors of GWSSB for Civil Materials

All the products (related to water supply & Sewerage schemes) manufactured by Government PSUs shall be accepted as Approved Vendors.

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

PE- 80 up to 315 mm up to PN -10

PE-100 up to 315 mm up to PN -10

90 to 315 mm & 355 to 1000 mm

PN - 2.5

50 to 315 mm & 355 to 1000 mm

PN - 4

40 to 315 mm & 355 to 1000 mm

PN - 6

32 to 110 mm & 125 to 180 mm &

200 to 710 mmPN -8

32 to 110 mm & 125 to 315 mm &

355 to 630 mmPN -10

25 to 110 mm & 200 to 315 mm

PN -12.5

20 to 110 mm PN - 1650 to 315 mm & 355 to 1000 mm

PN - 6

40 to 180 mm & 200 to 900 mm

32 to 315 mm & 355 to 800 mm

PN -10

25 to 110 mm & 200 to 315 mm

PN -12.5

20 to 110 mm PN - 16

90 to 1000 mm PN - 2.5

50 to 1000 mm PN - 4

32 to 1000 mm PN - 6

32 to 180 mm PN -8

20 to 450 mm PN -10

20 to 180 mm PN -12.5

50 to 1000 mm PN - 6

40 to 315 mm PN -8

32 to 500 mm & 800 mm

PN -10

20 to 180 mm & 200 to 500 mm

PN - 16

M/s. Parixit Irrigation Limited, Sanand

(Formerly known as M/s. Emtelle India Limited,

Sanand)

Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,

Ahmedabad - 382 170ho@emtelleindia.com

joshi@emtelleindia.com

1/31/2019(5 yrs

Approval over)

Name changed vide letter no. 369 dtd.30-8-2018

Vendor Approval

Application received, shop survey carried out & vendor

approval is under process

PE-100

B-494, RICCO Industrial Area, Bhiwadi, Dist. Alwar, Rajasthan-301019

works@purmapipes.com

1/31/2019(5 yrs

Approval over)

Debarred for 3 years from works of

GWSSB vide letter NO.

Mat.Cell/C/HDPE

Pipe/4172/915 dtd. 11-12-

PE-100

1M/s. Aerochem Piping Pvt. Ltd., Ahmedabad

Plot No. 258, Road No. 1/B, Phase-I, Kathwada, GIDC, Ahmedabad-382430

info@aeropipes.insales@parthvalves.com

1/31/2019(5 yrs

Approval over)

Vendor Approval

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of HDPE (PE-80 & 100) Pipes (IS-4984) with ISI mark as per Vendor

Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval

Valid up to Date

Remarks

2M/s. Purma Plast Pvt.

Ltd., Bhiwadi

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

PE-80 20 to 400 mmPN - 2.5 to PN

PE-100 20 to 400 mmPN - 6 to

90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16

50 to 1000 mm PN - 640 to 800 mm PN -832 to 800 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 110 mm PN -12.590 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 180 mm PN -12.520 to 180 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 180 mm PN -12.520 to 180 mm PN - 16

50 to 1000 mm PN - 640 to 900 mm PN -832 to 800 mm PN -1025 to 630 mm PN -12.520 to 500 mm PN - 16

PE- 80 40 to 140 mm PN - 6PE-100 50 to 180 mm PN - 6

PE-100 32 to 160 mm PN -109

M/s. Mayfair Polymers Pvt. Ltd., Himmatnagar

Mayfair Compound, N.H.No.8, Himmatnagar - 383 001

smayfair50@yahoo.comsmayfair50@gmai.com

12/31/2019(Renewed for

2 yrs)-

Vendor Approval

approval is under processPE-100

7M/s kelvin Plastics Private Ltd.,Rajkot

Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27

(Old-8B), Bhunava, Gondal, Rajkot-360311

mail@kelvinpipe.com

PE-801/31/2019

(5 yrs Approval

Vendor Approval

8M/s. Jain Irrigation

Systems Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,

Maharastrapipes@jains.com

pemktgws@jains.com

PE-801/31/2019

(5 yrs Approval

6M/s Krishna Plastics,

Rajkot

Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,

Rajkotsumopoly@rediffmail.comkrishna_mit5@yahoo.co.in

PE-801/31/2019

(5 yrs Approval

over)PE-100

Vendor Approval

5M/s Time technoplast

Ltd. Silvasa

Survey No. 326/1/1 (Part) & 328, Unit-2, Dhodharoada, Village-Velugam,

Silavassa- U.T. of D & N. H. -396230

santosh.d@timetechnoplast.com

PE-801/31/2019

(5 yrs Approval

4M/s. Reliance Industries

Ltd., Hazira

Reliance Industries Ltd, Relpipe Plant, Village-Mora, Post-Bhatha, Hazira,

Surat-394510pravin.gupta@ril.com

1/31/2019(5 yrs

Approval over)

Vendor Approval

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 315 mm (Except 125 mm)

PN - 2.5

PN - 4

PN - 6

PN -10

PN - 6

PN -10

200 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1020 to 180 mm PN -12.5

110 to 180 mm PN - 1650 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1025 to 250 mm PN -12.5110 to 180 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 500 mm PN - 640 to 315 mm PN -825 to 315 mm PN -1025 to 200 mm PN -12.550 to 630 mm PN - 640 to 315 mm PN -832 to 630 mm PN -1025 to 200 mm PN -12.5

125 to 200 mm PN - 2.5125 to 200 mm PN - 440 to 200 mm PN - 632 to 200 mm PN -825 to 200 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 200 mm PN - 640 to 200 mm PN -832 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16

PE-100

14M/s. Dolphin Poly Plast

pvt. Ltd., Rajkot

Plot No. G/1/C, Near Gate no. 2, Ta:- Lodhika, GIDC Metoda, Rajkot-360021

dolphinpipe31100@yahoo.cominfo@dolphinpipe.com

PE- 80

2 yrs)

PE-100

13M/s. Dutron Polymers

Ltd., Kheda

Bolck No. 642, N.H. 8, At-Hariyala, Kheda

sales@dutronindia.com

PE-8012/31/2019

(Renewed for 2 yrs)

PE-100

12M/s. Kisan Moulding Ltd.,

Silavasa

108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli,

Silvassa-396230kapil.thaker@kisangroup.com

kapil.pvc@gmail.comajit.dandekar@kisangroup.com

2 yrs)

PE-100

11M/s. Nimbus Pipes Ltd.,

Jaipur

SP2-123/123A, RIICO Industrial Area, Manda Near Kaladera, Chomu, Jaipur-

302023, Rajasthanadmin@nimbuspipes.com

2 yrs)-

PE-100

10M/s. Kothari Agritech Pvt.

Ltd., Solapur

Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-

413 213, Maharastraujwal@kotharipipes.co.insales@kotharipipes.co.in

2 yrs)

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 140 mm & 160 to 400 mm

PN - 2.5

50 to 140 mm & 160 to 400 mm

PN - 4

40 to 400 mm PN - 632 to 400 mm PN -825 to 400 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 400 mm PN - 640 to 400 mm PN -832 to 400 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1050 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -10

500, 630 & 710 mm

PN - 2.5

50 to 110 mm, 355 to 400 mm, 500, 630 & 710

PN - 4

40 to 400 mm, 450, 500, 630 &

710 mm PN - 6

32 to 110 mm, 355 to 400 mm, 450, 500, & 630

25, 32 to 200 mm (Except 125 mm), 450, 500, & 630

PN -10

20 to 180 mm PN -12.550 to 500 mm &

630, 710 mmPN - 6

40 to 500 mm & 630, 710 mm

32 to 500 mm & 630, 710 mm

PN -10

25 to 400 mm PN -12.590 to 450 mm PN - 2.550 to 450 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 450 mm PN -12.520 to 450 mm PN - 16

DELETED

PE -100

18M/s. Rungta Irrigation

Ltd., Ghaziabad

C-165, Bulandshahar Road, Industrial Area, Ghaziabad (U.P.)

Works@rungtairrigation.ininfo@rungtairrigation.in

31-12-2017

PE-100

17M/s. Kriti Industries (India) Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP

pparmar@kritiindia.com

PE- 80

2 yrs)-

PE-100

16M/s. Meghdoot Polypipes, Jaipur

G-1-198, Road No. 10, Bindayaka Industrial Area, Phase-II, Jaipur-302012

meghdootjaipur@gmail.com

PE- 8012/31/2019

(Renewed for 2 yrs)

15M/s. Kisan Irrigation &

Infrastructure ltd., Mumbai

Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 775rajesh.sharma@kisanirrigation.com

rajsharma_kisan@yahoo.comcustomercare@kisanirrigation.com

PE- 80

2 yrs)-

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 400 mm PN -12.520 to 315 mm PN - 1650 to 630 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 400 mm PN -12.520 to 315 mm PN - 1640 to 315 mm PN - 6

125 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

90 to 180 mm PN - 2.5

50 to 180 mm PN - 4

40 to 180 mm PN - 6

32 to 180 mm PN -8

32 to 180 mm PN -10

50 to 180 mm PN - 6

40 to 180 mm PN -8

32 to 180 mm PN -10

90 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1063 to 110 mm PN - 2.563 to 110 mm PN - 463 to 125 mm PN - 6

125 mm PN -8125 mm PN -10

20 to 125 mm PN -12.520 to 125 mm PN - 1663 to 125 mm PN - 6

125 mm PN -8125 mm PN -10

20 to 125 mm PN -12.520 to 125 mm PN - 1690 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 180 mm PN -12.550 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 180 mm PN -12.5

22M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,

Talod, Sabarkanthavinayakpolypipes@gmail.com

PE-8031/12/2020

(Renewed for 2 yrs)

PE-100

23M/s. Vishakha Irrigation

Pvt. Ltd., Ahmedabad

Block No. 792, Nr. Monik Ind. Sadaspur Road, Village:- Moti Bhoyan, Kalol,

Gandhinagarrajivraval@vishakhairrigation.com

prdn@vishakhairrigation.com

31/12/2018 -

PE-100

20M/s. Elegant Polymers,

Rajkot

Elegant Polymers, At-Navagam (Bamanbore), Taluka:- Chotila,

Surendranagar.jkpatelkisan@hotmail.com

PE- 8031/12/2020

(Renewed for 2 yrs)

PE-100

21M/s. Signet Industries

Ltd., Dhar (MP)

Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar,

Madhya Pradeshumesh@groupsignet.com

ashish.butani@groupsignet.com

PE-8031/12/2020

(Renewed for 2 yrs)

Vendor Approval

19M/s. Noble Polymers,

Silvassa

Sr. No. 132/1/1/4, 96/2/2 & 95/1/2, B/H. Prince Pipes, Village :- Athal,

Silvassa-396230, UT of Dadra & Nagar Haveli.

noblepolymers@gmail.com

2 yrs)-

PE-100

30-6-2021(Renewed for

2 yrs)-

PE-100

PE-80 Survey no.3, Plot no. 76-79, B/h Kisan Dhydration, NH-27, Village-Bhojpara,

Taluka- Gondal, Rajkot-360311info@capitalpolyplast.com

M/s. Capital Polyplast (Guj.) Pvt. Ltd., Rajkot

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

40 to 315 mm PN - 632 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN -1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

125 to 315 mm PN - 2.5125 to 315 mm PN - 6125 to 315 mm PN -8125 to 315 mm PN -1020 to 315 mm PN -12.520 to 315 mm PN -16200 to 315 mm PN - 6200 to 315 mm PN -8200 to 315 mm PN -10125 to 315 mm PN -12.520 to 315 mm PN -1690 to 400 mm PN - 2.550 to 315 mm PN - 440 to 400 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 400 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

125 to 450 mm PN - 2.550 to 450 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 450 mm PN -12.520 to 400 mm PN - 1690 to 180 mm PN - 2.540 to 180 mm PN - 432 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -10

50 to 110 mm & 200 to 400 mm

PN - 6

40 to 110 mm & 200 to 400 mm

32 to 110 mm & 200 to 400 mm

PN -10

20 to 50 mm PN -12.520 to 50 mm PN - 16

90 to 315 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

30/11/2019(Approval for

3 years)

PE-8030/11/2019

(Approval for 3 years)

PE-100

30M/s. Mohit Polytech Pvt.

Ltd., Jaipur

F-139, Road no. 6, RIICO Industrial Area, Bindayaka, Jaipur-302012mohitpolytech112@yahoo.comsharwank@mohitpolytech.commarketing@mohitpolytech.com

3 years)

27M/s. Jet Fibre India Pvt.

Ltd., Ahmedabad

Shed No. 658, Suvey No. 909/1 & 2, Pursottam farm, (Bhudarpura) Mahij,

Kheda-387 120jetfibre@hotmail.com,contact@jetfibre.com

PE-8030/11/2019

PE-100

M/s. Kataria Plastics Pvt. Ltd., Ratlam

PE-100

29M/s. Miraj Pipes &

Fittings Pvt. Ltd., Udaipur

Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan

jitender.singhal@mirajgroup.in

26M/s Krishna Plastics,

Rajkot

Rajkotsumopoly@rediffmail.comkrishna_mit5@yahoo.co.in

2 yrs)-

PE-100

2 yrs)-

PE-100

Plot no. G-922, Lodhika GIDC, Gate no.3, Kishan Gate Main Road, Kalavad

Road, Metoda, Rajkot-360 021

khyatipolymers@rediffmail.com

M/s. Khyati Polymers, Rajkot

PE-100

39-44 A, Industrial Area, Ratlam-457001, Madhya Pradeshjeetan.kipl@gmail.com

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 500 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 180 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 6

125 to 200 mm PN -8125 to 200 mm PN -10125 to 200 mm PN -12.5125 to 200 mm PN - 1650 to 315 mm PN - 6

125 to 200 mm PN -8125 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16

125 to 180 mm PN - 2.540 to 110 mm PN - 632 to 180 mm PN -825 to 110 mm PN -1020 to 110 mm PN -12.5

PE-100

3 years)

98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331

vijay.prasad@texmopipe.com

M/s. Texmo Pipes & Products Ltd., Burhanpur

(MP)34

PE-100

3 years)

Debarred for 3 years from works of

GWSSB vide letter NO.

Mat.Cell/C/HDPE

Pipe/4172/38 dtd. 23-1-2020

SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., Jaipur-302022

shravan@tijaria-pipes.cominfo@tijaria-pipes.com

vikash@tijaria-pipes.com

M/s. Tijaria Polypipes Limited, Jaipur

33M/s. Sagar Polytechnik

Ltd., Chotila (Surendranagar)

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,

Surendranagarbalbhadra.jadeja@sagarpolymers.com

denish@sagarpolymers.com

PE-100

3 years)

PE-100

3 years)31

M/s. Dinesh Irrigation Pvt. Ltd., Jaipur

86B & 86B-II, Jhotwara Industrial Area, Jaipur-302012

dineshirrigation@gmail.comsales@dineshirrigation.com

PE-100

R.S. No. 13/2P1, Plot no. 4, NH 27, Opp. Sadak Pipaliya Gate, Village:- Sadak Pipaliya, Ta. Gondal, Rajkotbalsonpolyplastfac@yahoo.co.in

M/s. Balson Polyplast Pvt. Ltd., Rajkot

3506/03/2021

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 450 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 800 mm PN - 2.550 to 800 mm PN - 440 to 800 mm PN - 6

32 to 500 mm & 630 mm

25 to 500 mm PN -1020 to 315 mm PN -12.550 to 800 mm PN - 640 to 800 mm PN -8

32 to 500 mm, 630 mm & 710

mmPN -10

25 to 315 mm PN -12.520 to 315 mm PN - 16

110 mm PN - 2.5110 mm PN - 4

40 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1090 to 315 mm PN - 2.550 to 315 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1640 to 315 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1025 to 110 mm PN -12.520 to 110 mm PN - 16

M/s. Tufropes Private Limited, Silvassa

(Formerly known as M/s. Polysil Irrigation Systems

Pvt. Ltd., Silvassa)

Survey No. 137/1, Madhuban Road, Village:- Karad, Silvassa-396 230,

D & NHjjain@turfropes.com

polysilgujarat@polysilpipes.comramkumar_silvpipe@yahoo.com

3 years)

Name chanded vide letter

no.89 dtd.7-3-2019

PE-100

3 years)

PE-100

Survey no. 146/P2, Behind Raymond Ltd., At & Po. Motiwada, Taluka:-

Killapardi, District:- Valsad -396125, Gujarat

bipin.modi@sangir.comproduction2@sangir.in

M/s. Sangir Plastics Pvt. Ltd., Valsad

PE-100

UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli,

Maharshtrainfo@parvatiudyog.com

M/s. Parvati Agro Plast, Sangli (Maharashtra)

3606/03/2021

3 years)

PE-100

40M/s. Sarovar Polymers

Pvt. Ltd., Rajkot

27/28, Atul Industrial Estate, Opp. Jyoti CNC & Pathak School, B/h. Akshar

Weight Bridge, Kalawad Road, Metoda GIDC, Rajkot-360021

info@sarovarpolymers.com

PE-8006/03/2021

PE-100

38M/s. Duke Pipes Pvt. Ltd.,

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,

Banaskanthadkpatel@dukeplasto.comprojects@dukepipes.com

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -832 to 110 mm PN -1032 to 110 mm PN -12.532 to 110 mm PN - 1650 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1032 to 110 mm PN -12.532 to 110 mm PN - 16

Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.

PE-100

Survey No. 156/157. Ribda Lodhika Road, Near Makhawad Chokdi,

Makhavad, Rajkot-360035natrajpolyplast@yahoo.com

dhaval@natarajpolyplast.com

M/s. Nataraj Polyplast Pvt. Ltd., Rajkot

4111/02/2022

PE-100

3 years)

Near Murakhda's Patiya, At- Murakhda, Tal.:- Upleta, Rajkot

shrinathjipolyplast@gmail.com

M/s. Shrinathji Polyplast, Rajkot

Size (mm) Class1 2 3 5 6 7 8

75 to 500 mm SN : 4 & 8

600 to 1000 mm SN: 2, 4, 6 & 8

2M/s. Prince Pipes &

Fittings Ltd., Haridwar (Uttarakhand)

Khasra No. 1548/49- 4 & 5, Salempur. Mehdood, 2, Bahadrabad, Haridwar-

249 402, Uttarakhand

75 to 500 mm(Except 225 mm)

SN : 4 & 811/02/2022

1M/s. Alom Poly

Extrusions Ltd., Kolkata

Banganagar, Falta, 24 Parganas (South), West Bengal

mktg@alom.inalom@alom.in

dwc.admin@alom.in

3 years)

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of DWC (HDPE) Pipes (IS-16098 Part -2) with ISI mark as per

Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)Sr. No.

Valid up to Remarks

Size (mm) Class1 2 3 4 5 6 7

63 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 110 mm Class IV- 8.0 kg/cm2

63 to 315 mm Class V- 10.0 kg/cm2

63 to 110 mm Class II- 4.0 kg/cm263 to 250 mm Class III- 6.0 kg/cm263 to 250 mm Class IV- 8.0 kg/cm263 to 250 mm Class V- 10.0 kg/cm2

M/s. Parixit Irrigation Limited, Sanand

(Formerly known as M/s. Emtelle India Limited,

Sanand)

Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,

Ahmedabad - 382 170ho@emtelleindia.com

joshi@emtelleindia.com

63 to 315 mm Class III- 6.0 kg/cm2

31/01/2019(5 yrs

Approval over)

Name changed vide letter no. 369

dtd.30-8-2018Vendor Approval

Application received, shop

survey carried out & vendor approval

is under process

63 to 315 mm Class II- 4.0 kg/cm2

25 to 315 mm Class IV- 8.0 kg/cm2

6M/s. Jain Irrigation Systems

Ltd., Jalgaon

pemktgws@jains.com

63 to 630 mm Class II to VI

( 4.0 to 12.5 kg/cm2)

31/01/2019(5 yrs

Approval over)

Vendor Approval Application

received, shop survey carried out & vendor approval

is under process

90 to 250 mm (Except 125

mm)Class II- 4.0 kg/cm2

mm)Class III- 6.0 kg/cm2

mm)Class V- 10.0 kg/cm2

M/s. The Supreme Industries Ltd., Jalgaon

4 M/s. Polysil Pipes, Silvassa

Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi,

Silvassa, D & N.H.rohit@turfropes.comqcpp@tufropes.com

31/01/2019(5 yrs

Approval over)

is under process

2M/s. Super Industrial Corp.,

PatialaC-67, Focal Point, Patiala-147004

super67@ymail.com

31/01/2019(5 yrs

Approval over)

5 M/s Sumo Polyplast Pvt.Ltd.

Rajkotsumopoly@rediffmail.com

31/01/2019(5 yrs

Approval over)

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Ringfit UPVC Pipes (IS-4985) with ISI mark as per Vendor

Selection Report submitted by Different TPI (As on dt. 23-1-2020)Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval

Valid up to Remarks

1The supreme Industries Ltd.,

At: Gadegaon, PO: Neri. Dist: Jalgaongk_saxena@supreme.co.in

31/01/2019(5 yrs

Approval over)

7M/s. Mayfair Polymers Pvt.

Ltd., Himmatnagar

Mayfair Compound, N.H.No.8, Himmatnagar - 383 001

smayfair50@yahoo.comsmayfair50@gmail.com

31/12/2019(Renewed for 2 yrs)

8M/s. Kisan Moulding Ltd.,

Silavasa

108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli,

Silvassa-396230kapil.thaker@kisangroup.com

kapil.pvc@gmail.comajit.dandekar@kisangroup.com

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

9M/s. Dutron Polymers Ltd.,

sales@dutronindia.com63 to 315 mm Class III- 6.0 kg/cm2

mm)Class I- 2.5 kg/cm2

63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm

(Except 125 mm)

Class IV- 8.0 kg/cm2

40 to 315 mm Class III- 6.0 kg/cm263 to 315 mm

(Except 125 mm)

Class IV- 8.0 kg/cm2

63 to 315 mm Class V- 10.0 kg/cm2140 to 315 mm Class VI- 12.5 kg/cm2

13M/s. AKG Extrusion Pvt. Ltd.,

B-39, Sector-80, Noida, Uttar Pradesh-201305

akgextrusiions@gmail.com40 to 315 mm Class III- 6.0 kg/cm2 31-12-2017 DELETED

14M/s. Stuti Pipes Pvt. Ltd.,

Sabarkantha

Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij,

Dist.:- Sabarkantha-383205stutipipes@gmail.com

mm) Class III- 6.0 kg/cm2

16M/s. Vinayak Polypipes Pvt.

Ltd., Himmatnagar

12M/s. Kriti Industries (India)

Ltd., Indore

10M/s. Kothari Agritech Pvt.

Ltd., Solapur

Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-413 213, Maharastra

ujwal@kotharipipes.co.insales@kotharipipes.co.in

Infrastructure ltd., Mumbai

Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 775rajesh.sharma@kisanirrigation.com

15M/s. Signet Industries Ltd.,

Dhar (MP)

Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar,

Madhya Pradeshumesh@groupsignet.com

ashish.butani@groupsignet.com

is under process

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

17M/s. Swastik Krushi Polypipes Pvt. LTD.,

Dahegam

Plot No. 314, Zak Industrial Area, Vahelal Road, Village- Zak, Post-

Paradhol, Dahegam, Gandhingar-382330

swastikpipe@yahoo.commail@swastikkrushi.com

63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2

90 to 315 mm Class I- 2.5 kg/cm2125 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm2

125 to 180 mm Class IV- 8.0 kg/cm290 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2

27M/s. Prince Pipes & Fittings

Pvt. Ltd., Dadra & Nagar Haveli

Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra,

Silvassa, D & N.H. - 396 191hrp@princepipes.cominfo@princepipes.comrjs@truborepipes.com

30/06/2020(Approval

for 3 years)

30/06/2020(Approval

for 3 years)28

M/s. Elegant Polymers, Rajkot

6, Rajputpara, Lohana Boarding, Rajkot-360 001

jkpatelkisan@hotmail.comamipatel.mit@gmail.com

N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat

pppatel@dukeplasto.com

30/06/2020(Approval

for 3 years)DELETED

30/06/2020(Approval

for 3 years)

Rajkot Ahmedabad N.H. No. 8-B, Wankaner Chowkdi, Survey no.552,

Opp. Kuvadava High School, Kuvadava, Rajkot-360 023

info@idolpipe.com

M/s. Idol Plasto Pvt. Ltd., Rajkot

30/06/2020(Approval

for 3 years)26 M/s. Kamdhenu Pipe, Rajkot

Near Murakhda's Patiya, At- Murakhda, Taluka:- Upleta, Rajkotkamdhenupipe2011@gmail.com

info@kamdhenupipe.com

30-6-2021(Renewed for 2 yrs)

Survey No.149/1, Dholka-Kheda Road, Opp. GIDC Estate, Dholka-

382225, Dist. Ahmedabadabdul.navaz@astralpipes.com

info@astralcpvc.comshailesh.thakker@astralpipes.com

M/s. Astral Polytechnik Ltd., Ahmedabad

19M/s. Godavari Pipes Pvt.

Ltd., Rajkot

Survey No. 26 & 27, Plot no.6 To 10, N.H.8-B, Shapar (Veraval), Dist.

Rajkot.godavari@waterflo.in

30/11/2019(Approval

for 3 years)23

M/s. Borana Industries, Jodhpur

E-39, M.I.A. Basni 2nd Phase, Jodhpur, Rajasthan

sales@boranaindustries.com

30/11/2019(Approval

for 3 years)

24M/s. Duke Plasto Tech.Pvt.

Ltd., Palanpur

21M/s. Kataria Plastics Pvt.

Ltd., Ratlam

39-44 A, Industrial Area, Ratlam-457001, Madhya Pradeshjeetan.kipl@gmail.com

30/11/2019(Approval

for 3 years)

M/s. Miraj Pipes & Fittings Pvt. Ltd., Udaipur

Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan

jitender.singhal@mirajgroup.in

Survey no.257, Plot No.23 to 28, NH-27, Shapar (Veraval), Rajkot

info@captainpipes.com

M/s. Captain Pipes Ltd., Rajkot

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

25 to 180 mm Class VI- 12.5 kg/cm2

90 to 180 mm Class I- 2.5 kg/cm263 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm2

90 to 315 mm Class I- 2.5 kg/cm2

35M/s. Apollo Pipes Ltd., Uttar

Pradesh

Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar, Uttar Pradesh

jyotikaul@apollopipes.com

63 to 315 mm Class III- 6.0 kg/cm206/03/2021

mm)Class IV- 8.0 kg/cm2

mm)Class VI- 12.5 kg/cm2

30/06/2020(Approval

for 3 years)29

M/s. Skipper Limited, Ahmedabad

Survey No. 823, Village: Rajoda, Ahmedabad-Rajkot Highway, Taluka:

Bavla, Ahmedabad-382220pvcgujarat@skipperlimited.comvishal.shah@skipperlimited.com

32M/s. Aron Pipes Pvt. Ltd.,

Block No. 187, Plot No. 1 to 21, Kim-Mandvi Highway, Kim, Surat-394110

purchase.aron@gmail.cominfo@aronpipes.com

30/06/2020(Approval

for 3 years)

30M/s. Tijaria Polypipes

Limited, Jaipur

SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., Jaipur-

302022shravan@tijaria-pipes.com

info@tijaria-pipes.comvikash@tijaria-pipes.com

30/06/2020(Approval

for 3 years)

Debarred for 3 years from works

of GWSSB vide letter NO.

Mat.Cell/C/HDPE Pipe/4172/38 dtd.

23-1-2020

31M/s. Texmo Pipes &

Products Ltd., Burhanpur (MP)

30/06/2020(Approval

for 3 years)

36M/s. Parvati Agro Plast,

Sangli (Maharashtra)

UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli,

Maharshtrainfo@parvatiudyog.com

06/03/2021(Approval

for 3 years)

06/03/2021(Approval

for 3 years)

06/03/2021(Approval

for 3 years)

Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27 (Old-8B), Bhunava, Gondal, Rajkot-

360311mail@kelvinpipe.com

M/s kelvin Plastics Private Ltd.,Rajkot

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-

385001, Banaskanthadkpatel@dukeplasto.comprojects@dukepipes.com

06/03/2021(Approval

for 3 years)

Block No. 792, Near Monik Industries, Sadaspur road, Vill. Moti

Bhoyan, Tal. Kalol, Dist. Gandhinagar.

info@vishakhairrigation.comprdn@vishakhairrigation.com

M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad

M/s. Guru Polyplast, 4/11 & 4/12, GIDC Chandisar, 06/03/2021

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

90 to 200 mm (Excluding 180

125 to 400 mm Class I- 2.5 kg/cm2

20 to 400 mm Class VI- 12.5 kg/cm2

M/s. Godavari Pipes Pvt. Ltd., Rajkot

Survey No. 137/1, Plot no.8 & 9, Veraval Padvala Main Road, Ta.;-

Kotda Sangani, Dist.:- Rajkot- 360024godavari@waterflo.in

11/02/2022(Approval

for 3 years)42

06/03/2021(Approval

for 3 years)

Surendranagarbalbhadra.jadeja@sagarpolymers.c

M/s. Sagar Polytechnik Ltd., Rajkot

38M/s. Guru Polyplast,

Palanpur

4/11 & 4/12, GIDC Chandisar, Palanpur, Banaskantha-385510

sahebpipe@gmail.com

06/03/2021(Approval

for 3 years)

40M/s. Active Pipe Industries,

Dhoraji

Nr. Railway crossing, Junagadh Road, Dhoraji-360410

activepipe@gmail.com

11/02/2022(Approval

for 3 years)

41M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)

Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-

383215

project@vasanipolymers.com

11/02/2022(Approval

for 3 years)

Size (mm) (NM) Class

1 2 3 4 5 6 740 to 200 mm RMS40 to 200 mm CM

150 to 200 mm CS200 to 400 mm CD

40 to 250 mm CM

150 to 250 mm CS

150 to 400 mm CS

40 to 400 mm CM

40 to 400 mm RMS

250 to 400 mm PMS

115 to 400 mm CD

115 to 175 mm RDS

125, 175, 200, 250 mm

175, 200, 250 mm CS

100 to 150 mm , 175 mm & 200 mm

150 mm, 175 mm & 200 mm

125 mm, 150 mm & 200 mm

125, 150, 175, 200 mm

150, 175, 200, 250 mm

100, 115, 125, 150, 175, 200, 250 mm

150, 175, 200, 250 mm

150 mm to 250 mm CS40 mm to 300 mm CM

100 mm to 300 mm CD40 mm to 200 mm RMS

150 mm to 400 mm CS

40 mm to 400 mm CM

7M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar

8M/s. Skipper Limited,

Kolkata

Ububeria Unit, N.H. No.-6, Village:- Madhabpur, PO:- Mahishrekha, PS:-

Uluberia, Howrah-711 303ujjal.bhattacharyya@skipperlimite

30/06/2019(Approval

for 3 years)-

Survey no.257, Plot No.23 to 28, NH-27, Shapar (Veraval), Rajkot

info@captainpipes.com

M/s. Captain Pipes Ltd., Rajkot

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR

List of Approved Vendors of GWSSB for supply of uPVC Screen & Casing Pipes (IS-12818) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail Address

Approved Size & Class Approval Valid up to

Date Remarks

2M/s. Polysil Pipes,

Silvassa

Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi,

Silvassa, D & N.H.rohit@turfropes.com

31/01/2019(5 yrs

Approval over)

Vendor Approval

Application received &

shop survey order has been

placed

1M/s. Super Industrial

Corp., PatialaC-67, Focal Point, Patiala-147004

super67@ymail.com

31/01/2019(5 yrs

Approval over)

3M/s. Jain Irrigation

Systems Ltd., Jalgaon

pemktgws@jains.com

31/01/2019(5 yrs

Approval over)

Vendor Approval

4M/s. Dutron Polymers

Ltd., Kheda

sales@dutronindia.com

5M/s. Kriti Industries (India) Ltd., Indore

6M/s. Stuti Pipes Pvt. Ltd.,

Sabarkantha

Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij,

Dist.:- Sabarkantha-383205stutipipes@gmail.com

1 2 3 4 5 6 7

Sr. No.

Date Remarks

150 to 350 mm CS

100 to 350 mm CM

150 to 300 mm CS40 to 300 mm CM

100 to 400 mm CD250 to 300 mm PMS100 to 300 mm RMS

40 to 250 mm CM

150 to 250 mm CS

40 to 250 mm RS

150 to 200 mm CS

100 to 250 mm CM

100 to 250 mm RS

150 to 250 mm CS

40 to 250 mm CM

175 to 300 mm CS100 to 300 mm CM100 to 300 mm CD200 to 300 mm PMS200 to 300 mm PDS100 to 175 mm RMS100 to 175 mm RDS150 to 250 mm CS40 to 250 mm

(Except 115 mm)CM

150 to 200 mm CS

100 to 200 mm CM

Infrastructure Ltd., Dhar (MP)

Factory:- Unit II, Plot No. 91-110, Sector no. 3, Pithampur, Dhar,

Madhya Pradeshrajesh.sharma@kisanirrigation.com

30/06/2020(Approval

for 3 years)

M/s. Texmo Pipes & Products Ltd., Burhanpur

30/06/2020(Approval

for 3 years)13

M/s. Prince Pipes & Fittings Pvt. Ltd., Dadra &

Nagar Haveli

Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra,

Silvassa, D & N.H. - 396 191hrp@princepipes.cominfo@princepipes.com

30/06/2020(Approval

for 3 years)12

11M/s. Duke Plasto

Tech.Pvt. Ltd., Palanpur

N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat

pppatel@dukeplasto.com

30/06/2020(Approval

for 3 years)DELETED

10M/s. Sagar Polytechnik

Ltd., Rajkot

Surendranagarbalbhadra.jadeja@sagarpolymers.c

omdenish@sagarpolymers.com

30/11/2019(Approval

for 3 years)

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-

385001, Banaskanthadkpatel@dukeplasto.comprojects@dukepipes.com

06/03/2021(Approval

for 3 years)

16M/s. Apollo Pipes Ltd.,

Uttar Pradesh

Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar, Uttar Pradesh

jyotikaul@apollopipes.com

06/03/2021(Approval

for 3 years)

17M/s. C.R.I. Pumps Pvt.

Ltd., Kalol

Block NO. 56, B/H Jhonson Screen, Khatraj-Kalol Road, Khatraj, Kalol,

Gandhinagarsunil.patel@cripumps.com

senthil@cripumps.com

11/02/2022(Approval

for 3 years)

1 2 3 4 5 6 7

Sr. No.

Date Remarks

150, 175, 200 & 250 mm

100, 125, 150, 175, 200 & 250 mm

18M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)

Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-

383215vasanipvc@yahoo.com

11/02/2022(Approval

for 3 years)

1 2 3 4 5 6

1M/s. Samshi Pipe

Industries Ltd., Vadodara

Plot No. E-9, Savli GIDC Estate, Manjusar, Savli, Vadodara-391165

hitesh patel@samshico.com

MS Helical Seam Submerge Arc Welded Pipe :-Size range 18' (457 mm) to 100" (2540 mm) and thickness 5 mm to 20 mm in length 6 mtr to 12 mtr.

31/01/2017 DELETED

2M/s. Bhushan Steel Ltd.,

Raigadh

Nigan-savroli, Isamba Phata khopoli, Tal;- Khalapur, Dist:- Raigad,

Maharastra-410203kumar.ajit@bhusansteel.com

ERW Pipes of range:- Dia- 3" to 8" (80 NB to 200 NB), 8" to 24" maximum thickness up to 12.7 mm.

31/01/2019(5 yrs

Approval over)

3M/s. Ratnamani Metals &

Tubes Ltd., Chhatral

Plot no. 3306 to 3309, GIDC Estate, Chhatral Phase IV, Ahmedabad-

Mehasana Highway, Chhatral, kadi, Mehasana-382729

info.sp@ratnamani.com

OD:- 355.6 mm to 1219 mm (14" to 48" N.B.)Wall thickness:- 5 mm to 28 mm

31/01/2019(5 yrs

Approval over)

4M/s. Ratnamani Metals &

Tubes Ltd., Kutch

Survey No. 474, Bhimasar road, Vill. Bhimasar, Tal. Anjar, Dist. Kutch -370201

info.kutch@ratnamani.com

OD:- 457 mm to 2540 mm (18" to 100" )Wall thickness:- 5 mm to 20 mm

31/01/2019(5 yrs

Approval over)

received & shop survey order has

been placed

5M/s. Jindal Saw Limited,

Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-

Mandvi Road, Tal: Mundra, Dist: Kutch-370415

jayesh.thakkar@jindalsaw.comsanjeev.chaudhary@jindalsaw.com

OD:- 457.2 mm to 2540 mm (18" to 100" )Wall thickness:- 6 mm to 25 mm

31/01/2019(5 yrs

Approval over)

received, shop survey carried out

& vendor approval is under

process

6M/s. Asian Mills Pvt. Ltd.,

Ahmedabad

Asian Mills PVt. Ltd., Plot NO. 1, Phase-1, GIDC Chhatral, Kalol,

Mehsana info@asiansteels.com

(1) IS: 1239 (Part-1)2004:- 15 mm to 80 mm Nominal Bore, Light, Medium, Heavy Class and 100 mm to 150 mm Nominal Bore Medium & Heavy Class, 100 mm NB Light Class Black plain end and screwed & socketed pipes.(2) IS : 3589-2001:- 168.3 mm OD to 508 mm OD (Except 244.5 mm OD) Blakc plain end and Beveled end Pipes Gr.Fe:330 & Fe:410(3) IS:4270-2001: 100 mm NB to 400 mm NB (Except 225 mm NB) Black Beveled End pipes Gr. Fe:410

31/01/2019(5 yrs

Approval over)

7M/s. Welspun corp ltd.,

Dahej (Bharuch)

Unit-I (Dahej Plant), Welspun Corp. Ltd., Village: Jolva & vadadla, Tal:

Vagra, Dahej Road, Bharuch, Gujarat-392 130

sourav_das@welspun.com

(1) M.S. Pipe from size :-457 mm to 1930 mm & thickness 5 mm to 14 mm(2) 3LPE/LPP coating for pipe size:- 4 inch to 64 inch OD(3) External coating FBE/CFBE for pipe size:- 4 inch to 64 inch OD(4) Internal liquid Epoxy for pipe size:- 20 inch to 64 inch ID

31/01/2019(5 yrs

Approval over)

process

Approved Size & Thickness

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of MILD STEEL (M.S.) Pipes (IS 3589) with ISI mark as per Vendor

Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail AddressApproval

Valid up to Date

Remarks

1 2 3 4 5 6

Approved Size & Thickness Sr. No.

Valid up to Date

Remarks

8 M/s. PSL Ltd., Anjar

Village varsana, Survey no. 39,40,42, Bhachau - Bhimasha road/ Nr.

Gandhidham Varsana, taluka- Anjar, Kutch-370240

pslvarsana2@pslltd.co.in

(1) Helical Seam Submerged Arc Welded Pipes:- ( IS 3589; Grade 330 & 410 IS 5504);-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 5 mm to 25 mm(2) 3LPE, 3LPP, CWC, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, ICP, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 2 mm to 50 mm

31/01/2019(5 yrs

Approval over)

process

9M/s. Welspun Corp Ltd, Anjar

Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar,

Kutch-370110(1) sourav_das@welspun.com

(2) Sanjay_raghavan @ welspun.com

(1) Helical Seam Submerged Arc Welded Pipes:- (a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 4 mm to 25 mm(2) 3LPE, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 0.1 mm to 50 mm

31/01/2019(5 yrs

Approval over)

process

10M/s. Essar Steel India Ltd.,

Hazira

Essar Steel India Ltd., (pipe mill Division), 27th Kms Surat Hazira

road, Surat, Gujarat-394270ameher@essar.com

gaurav.sharma1@essar.com

406 mm to 2540 mm in thickness 6 to 25.4 mm WT.

M/s. Surya Roshni Limited, Kutch

(Formerly Known as M/s. Surya Global steel tubes

Survey No.188, Anjar-Mundra highway, Village:-Bhuvad, Kutch-

370130rajeshmittal@ho.surya.in

surya_roshni@satyam.comsuryaglobalpipes@gmail.com

(A) MS ERW pipe:- 15 to 400 mm NB, up to 12.70 mm WT, Grade Fe 330 & 410 (B) MS Spiral Welded pipe:- From 457.2 mm to 2540 mm OD, up to 25 mm WT, Grade Fe 330 & 410

Name Changed vide letter No.218

dtd. 4-4-2018

12 M/s. SAIL Bokaro Steel City, Bokaro, Jharkhand

M.S. pipe of IS 3589:-2001 (ISI mark) 406 mm to 1626mm in thickness 6 to 25.4 mm WT.

Recommended by TCEL

13M/s. Riddhi Steel &

Tubes (P) Ltd., Ahmedabad

83-84, Village- Piplaj, Pirana Road, Ahmedabad-382 427info@riddhitubes.org

(1) M.S. ERW Steel Pipe conforms IS :1239: Part-1:2004- (Black & Galvanised) With ISI Mark - Size :- 15 to 150 mm NB(2) M.S. ERW Steel Pipe conforms IS :3589:2001- (Black ) With ISI Mark - Size :- 150 to 300 mm NB

1 2 3 4 5 6

Approved Size & Thickness Sr. No.

Valid up to Date

Remarks

14M/s. Surindra Engineering Company Limited, Gandhinagar

Factory;- Block No.1517, Village;- Moti Bhoyan, Kalol-Khatraj Road,

Kalol, Gandhinagar-383721surindra@vsnl.com

Secoahd@yahoo.com

M.S. Pipe as per IS 3589-2001(1) Spiral Saw Pipes:- OD 16 inch to 100 inch with pipe thickness from 5 mm to 16 mm(2) L Saw Pipes:- OD 36 inch to 100 inch with pipe thickness from 6 mm to 16 mm

30/06/2020(Approval

for 3 years)

1 2 3 4 5 6

1M/s. Welspun Corp Ltd, Anjar

Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar, Kutch-370110 sourav_das@welspun.comSanjay_raghavan @ welspun.com

(1) Hot Rolled Plates:- 8 mm to 140 mm thickness in all national & international Grades.(2) Hot Rolled Coils:- 6 mm to 25 mm thickness in all national & international Grades

31/01/2019(5 yrs

Approval over)

received, shop survey carried out & vendor

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Mild Steel Hot Rolled Plates & Coils as per Vendor Selection

Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & Thickness Approval

Valid up to date

Remarks

Size (mm) Class

1 2 3 4 5 6 7

1M/s. Jai Balaji Industries,

Burdwan (W.B)

Unit-3, Vill. Banskopa, P.O. Rajbandh, Dist. Bardwan, West Bengal-713212info@jaibalajigroup.com

80 to 1200 mm (Except 125 & 750

mm)K-7 & K-9

31/01/2019(5 yrs Approval

been placed

2M/s. Jindal Saw Limited,

Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road, Tal: Mundra, Dist: Kutch-370415jayesh.thakkar@jindalsaw.comsanjeev.chaudhary@jindalsaw.com

80 to 1000 mm K-7 & K-931/01/2019

(5 yrs Approval over)

Vendor Approval Application for 80 to 1200 mm dia

size received, shop survey carried out & vendor approval

is under process

M/s. Srikalahasthi Pipes Ltd., A.P.

( Formerly known as M/s. Lanco Industries

Ltd., AP)

Rachagunneri-517641, Srikalahasthi Mandal, Chittor District, APsplamd@srikalahasthipipes.comhomarketing@srikalahasthipipes.com

100 to 1100 mm ( Except 125 mm)

K-7 & K-931/01/2019

(5 yrs Approval over)

Name changed vide letter no. 299 dtd.17-10-2015Vendor Approval Application for 100 to 1100 mm dia size received, shop survey carried out & vendor approval is under process

4M/s. Electrotherm (I) Ltd.,

Survey no. 325, 310 KM Stone, Nr. Tollnaka, Village:- Samakhiyali, Ta:-

Bhachau, Kutch-370140ho@electrotherm.com

pipe@electrotherm.com

80 to 1200 mm K-7 & K-931/12/2019

(Renewed for 2 years)

been placed

80 to 1000 mmK-7 , K-8, K-10 &

80 to 1100 mm K-9

List of Approved Vendors of GWSSB for supply of DI Pipes (IS 8329) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval Valid

up to DateRemarks

5M/s. Electrosteel Castings

Ltd., Kolakatta

30, B.T. Road, Khardah, P.O. Sukchar, Dist. 24 Parganas (North)

jayesh.shah@electrosteel.comdpswaminarayan@electrosteel.com

2 years)-

Size (mm) Class

1 2 3 4 5 6 7

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval Valid

up to DateRemarks

M/s. Tata Metaliks Limited, Medinapur

(WB)(Formerly known as Tata Metaliks DI Pipes Ltd.,)

P.O.- Samraipur, Kharagpur, Dist.: Medinapur(West) -721301, West

Bengaljitendra.mishra@tmdipl.com

80 mm to 800 mm (Except 125 & 750

mm) K-7 & K-9

2 years)

Name changed vide letter no. 217 dtd.4-4-2018Vendor Approval Application received & shop survey order has been placed

7M/s. Rashmi Metaliks Ltd., Medinipore (WB)

Village:- Gokulpur, P.O. Shyamraipur, Dist. Paschim Medinipore, Pin-721 304, West Bengaldrk.prasad@rashmigroup.comsanjay.jolly@rashmigroup.com

80 to 1000 mm (Except 125 & 750

mm) K-7 & K-9

31/12/2019(Renewed for 2 years)

Size (mm) Class

1 2 3 4 5 6 780 to 150 mm

(Except 125 mm)Class-10

Class-15

80 to 150 mm (Except 125 mm) & 200 to 600 mm &

700 mm

Class-20

80 to 150 mm (Except 125 mm) & 200 to 350 mm, 400 to 600 mm & 700

Class-25

80 to 150 mm , Class -1080 to 700 mm, & 800mm, 900mm,

1000 mmClass -15

80 to 700 mm & 900mm,

Class -20

80 to 700 mm & 800mm

Class -25

List of Approved Vendors of GWSSB for supply of A.C. Pressure Pipes (IS 1592-2003) with ISI mark (Mazza Process) as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Valid up to Date

Remarks

1M/s. Apurva Vinimaya Pvt.

Ltd., Ahmedabad

P.O. Digvijay nagar, Ranip, Ahmedabad-382470

avplmazza.sales@gmail.com

2 years)-

2A Infrastructure Ltd., Bhilwara (Rajsthan)

P.O. Hamirgarh-311025, Dist:- Bhilwara, Rajasthan

ail_ahd@yahoo.co.injaipur@kanoria.org

2 years)-

Size (mm) Class Type

1 2 3 4 5 6 7 8

1M/s. Navkar Builders Ltd.,

Village- Sandhana, Block C.K.no:- 1160 & 1161A, Taluka-Matar, Kheda

nblrcchumepipe@gmail.com

300, 450, 500, 600, 900, 1000, 1200 &

1400 mmNP-3 & NP-4

Vertical Vibrated cast

31-12-2017 DELETED

List of Approved Vendors of GWSSB for supply of RCC pipe (IS:- 458:1989) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Valid up to Date

Remarks

Sr. No.

Name of Agency Adress/E-mail Address Type GradeApproval

Valid up to Date

Remarks

1 2 3 4 6 7

Ordinary Portland cement

53 grade

Portland Pozzolana cement

53 grade

Portland Pozzolana cement (Fly ash

based -15 to 35%)-

53 grade

43 GradeAs per IS 8112-

2013With ISI mark

based -15 to 35%)-

53 grade

Portland Slag cement -As per IS 455:1989

With ISI mark

6M/s. Gujarat Sidhee Cement Ltd., Veraval

Gujarat Sidhee cement ltd., opp. Veraval Kodinar Highway, Veraval,

Junagadhmanishsarupria@mehtagroup.com

2 years)

7M/s. Hi-Bond Cement (India) Pvt. Ltd., Rajkot

Survey no. 315,316,317, Patidad Gomta Chowkdi, Village Patidad,

Taluka:- Gondal, Rajkotmgjadeja@hibondcement.commanager@hibondcement.comdymgr.bd@hibondcement.com

info@hibondcement.com

2 years)

5M/s. J. K. Laxmi Cement

Ltd., Kalol

Village:- Moti Bhoyan, Taluka:- Kalol, Gandhinagar-382721

lakshmi_cement@lc.jkmail.com

2 yrs)-

List of Approved Vendors of GWSSB for supply of Cement (as per IS 269-2015) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

1M/s. Saurastra Cement

Ltd., Porbandar

Saurashtra Cement Ltd., Nr. Railway Station, Ranavav- 360 560, Porbandarmanishsarupria@mehtagroup.com

dbjagetiya@mehtagroup.com

2 years)-

4 M/s. Ultratech Ultratech cement, B-wing, 2nd floor, Ahura centre, Mahakali Caves road,

Andheri east, Mumbai-400093

2 years)

Recommended by TCEL

2 M/s. ACC Ltd. ACC ltd., Cement House, 121,

Maharishi karve road, Mumbai-400020

2 years)

3 M/s. AmbujaElegant Business park, MIDC Cross

road-B, Off Andheri-Kurla road, Andheri East , Mumbai-400059

2 years)

Sr. No.

Name of Agency Adress/E-mail Address Type GradeApproval

Valid up to Date

Remarks

1 2 3 4 6 7Ordinary Portland

cement 53 grade

43 Grade

9M/s. Tata Chemicals Limited, Devbhumi

DwarkaMithapur, Devbhumi Dwarka-361345

53 Grade06/03/2021

43 & 53 Grade

Portland Slag cement -

Based)-

3 years)8

M/s. Wonder Cement Ltd., Chittorgarh (Rajasthan)

R.K. Nagar, Taluka- Nimbahera, District;- Chittorgarh, Rajasthanplant.nbh@wondecement.com

10M/s. Sanghi Industries

Ltd., Kutch

P.O. Sanghipuram-370511, Taluka- Abdasa, Kutch

sanghicmo@sanghicement.comsanghicmo@sanghicement.com

info@sanghicement.com

3 years)

Approved Size & Class

Size (mm)

1 2 3 4 6 7

1M/s. Aashiana Rolling Mills

Ltd., Ahmedabad

Survey No.136, Nr. Friends Ispat, Kerala GIDC, Bavla, Ahmedabad-

382220friendstmt@gmail.com

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm 31/12/2019

List of Approved Vendors of GWSSB for supply of TMT/HSD Bars (IS 1786:2008) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail Address Material GradeApproval

Valid up to Date

Remarks

2M/s. Electrotherm (I) Ltd.,

Survey No. 325, N.H.No. 8A, 310 KM stone, Nr. Toll Naka, Village:-

Samakhiyali, Ta.: Bhachchau, Kutch-370140

kush.paliwal@electrotherm.com

Fe 415, Fe 500 & Fe 550

8 mm to 36 mm 31/12/2019

3M/s. Vinayak TMT bars Pvt. Ltd., Dahegam

Survey No. 25/1, 25/2, 24/P, Barot na Mosampur, Bayad Road, Post. Sampa,

Dahegam-382305, Gandhinagarvinayak.tmtbars@gmail.com

Fe 415 & Fe 500 8 mm to 36 mm 31/12/2019(Renewed for 2 years)

4M/s. Shree Parmeshwar

Steel Pvt. Ltd., Ahmedabad

220/E, Gujarat Vepari Maha Mandal, A.V. Ltd., Odhav, Ahmedabadsahil@parmeshwarsteel.com

Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,

Fe 550 D

8 mm to 32 mm 31/12/2019

5 M/s. TATA Steel Tata nagar, Jamshedpur, JharkhandFe 415, Fe 500 & Fe

5508 mm to 36 mm

2 years)

31/12/20196 M/s. ESSAR

Fe 415, Fe 500 & Fe 550

8 mm to 36 mm 31/12/2019

7 M/s. SAIL Bokaro Steel City, Bokaro, JharkhandFe 415, Fe 500 & Fe

5508 mm to 36 mm

2 years)

8 M/s. JINDALFe 415, Fe 500 & Fe

5508 mm to 36 mm

2 years)

9M/s. Utkarsh Bars Pvt.

Ltd., Surendranagar

Plot no. 725, Bamanbore GIDC, Bamanbore, Taluka:- Chotila, Dist.

Surendranagarmarketing@aryagroup.co.innawal.m@aryagroup.co.in

Fe 415, Fe 500 8 mm to 32 mm (Except 22 mm)

2 yrs)-

10M/s. Gallantt Metal

Limited, Kutch

Nr. Toll Gate, Village:- Samakhyali, Bhachau, Kutch.

gml@gallantt.com

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm (Except 18 mm & 22

2 yrs)-

Block No. 158, Nr. GEB Sub-Station,

Recommended by

11M/s. Akshar Ispat Ltd.,

Himmatnagar

Block No. 158, Nr. GEB Sub-Station, Nikoda Chokdi, At PO Bavsar,

Himmatnagarakshar_ispat@yahoo.in

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm 30-6-2021

(Renewed for 2 yrs)

Approved Size & Class

Size (mm)

1 2 3 4 6 7

Sr. No.

Name of Agency Adress/E-mail Address Material GradeApproval

Valid up to Date

Remarks

Fe 415, Fe 500 8 mm to 32 mm

Fe 415D, Fe 500D & Fe 550 D

8 mm to 32 mm (Except 18 mm )

M/s. Rudra Global Infra Products Ltd.,

survey no.144, Paiki 1 & 2, Nesada, Fe 415, Fe 415 D, Fe 30/06/2020

Name Changed

12M/s. Shreeyam Power and

Steel Industries ltd., Gandhidham (Kutch)

Plot no. 332, GIDC, Industrial Estate, Phase-2, Village;- Mithirahar, Taluka:-

Gandhidham, Kutch-370201ak_singh@spsil.in

3 Years)

13Products Ltd., (Formerly M/s. M.D. Inducto Cast Ltd.) , Bhavnagar

Sihor, Bhavnagarinfo@rudratmx.com

vivek.tyagi@rudratmx.com

415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,

Fe 550 D, Fe 600

8 mm to 32 mm 30/06/2020

(Approval for 3 Years)

vide letter No.4119/

39 dtd. 23-1-2020

14M/s. Diamond TMT & Procon Pvt. Ltd., Bhavnagar

468 & 469-1/2, Village:- Sanodar, Talaja highway, Taluka"- Ghogha,

Bhavnagarmarketing@diamondgroup.co.in

info@diamondgroup.co.in

Fe 415, Fe 500 8 mm to 32 mm 30/06/2020

(Approval for 3 Years)

15 M/s. Vishal Ispat, Valsad

Survey No.39/4P1, 39/5P1, 39/6, 4/1P, 2 & 3, Vatar Road, Village:- Morai,

Taluka;- Pardi, Valsad-396191 visco.vapi@gmail.com

Fe 415, Fe 415D, Fe 500, Fe 500D, Fe 500S, Fe 550, Fe

8 mm to 32 mm 11/02/2022

16M/s. Nilkanth Concast Pvt. Ltd., Kutch

Survey No. 221, Vadala, Mundra, Kutchinfo@nilkanthsteels.com

Fe 500 & Fe 500D 8 mm to 32 mm 11/02/2022

38/2P, 39/4 & 5 4/1, Morai Vatar Fe 415, Fe 415D, Fe 11/02/2022

17M/s. Balbir Rolling Mills Pvt. Ltd., Vapi (Unit-II)

38/2P, 39/4 & 5 4/1, Morai Vatar Road, Village- Morai, Taluka: Pardi,

Vapi, Valsad-396191brml@balbir.in

Fe 415, Fe 415D, Fe 500, Fe 500D, Fe 550,

Fe 550D8 mm to 32 mm

3 years)

Fe 415 & Fe 5008, 10, 12, 16, 20, 28,

Fe 415D, Fe 500D 8, 10, 12, 16, 20, 25,

28, 32 mmFusion Bonded Epoxy

Coated8 to 32 mm IS 1620

3 years)

Plot no. 59, 60 & 61, Light Industrial Area, Bhilai, Chhattisgarh-490026

hariomtmt@gmail.com

M/s. Hariom Ingots & Power Pvt. Ltd.,

Chhattisgarh18

Size (mm) Class

1 2 3 4 5 6 7 8

1M/s. Kartar Valves Pvt.

Ltd., Jalandhar

Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013

rsj@kartarvalves.comtilak@kartarvalves.com

50 to 600 mmPN 1.0 &

1.6With ISI mark

31/01/2019(5 Years Approval

Vendor Approval

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

50 to 1000 mm (SGI)

PN 1.0

50 to 600 mm (SGI)

PN 1.6

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

4M/s. Bharat Engineering

Works, Dhrangadhra

Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station,

Halvad Road, Dhrangadhra-363310, Gujarat

bharatengiworks@yahoo.com

50 to 600 mmPN 1.0 &

1.6With ISI mark

Vendor Approval

5M/s. VAG Valves India Pvt. Ltd., Hyderabad

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru

Mandal, Medak District-502307saleshyderabad@vag-

group.com

50 to 600 mm (DI)

PN 1.0 & 1.6

Without ISI Mark

6M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,

Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,

Gujarat.rdmulpardi@gmail.com

50 to 1600 mmPN 0.6 to

3.0Without ISI

31/12/2019(Renewed

for 2 years)-

Balitikuri, Bakultala, via Dasnagar, Howrah-711113

hsblt09@gmail.com

M/s. H.Sarker & Company, Howrah

3 With ISI mark

2M/s. Sachdeva Metal

works, Jalandhar

C-33, Focal Point Extension, Jalandhar City-144001

smw@rgindustriessachdeva.com

Vendor Approval

With ISI mark

List of Approved Vendors of GWSSB for supply of C.I. Sluice Valves (IS-14846) as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Valid up to Date

RemarksISI Mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

7M/s. Hawa Engineering

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, Ahmedabad

hawaengineers@gmail.com25 to 1200 mm

PN 1.0, 1.6, 2.0 &

Without ISI mark

31/12/2019(Renewed

for 2 years)

Cast steel/S.G. Iron/ DI

(Without ISI Mark)

Vendor Approval

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

Up to 600 mm PN 1.0 Up to 300 mm PN 1.6Up to 1200 mm PN 0.6Up to 1500 mm PN 1.0 Up to 1300 mm PN 1.6

Up to 500 mm PN 2.0

50 to 900 mm PN 1.0

50 to 600 mm PN 1.6

11M/s. Bikaner Engineering

Works , Jaipur

F-445, Road No. 12, V.K.I. Area, Jaipur-302013

bewfoundries@hotmail.com50 to 300 mm 1.0 & 1.6

With ISI Mark

50 to 600 mmPN 1.0 &

1.6With ISI

700 mmPN 1.0 &

1.6Without ISI

30/06/2020(Approved for 3 years)

PD type Short Body (D/F)

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

9M/s. Kirloskar Brothers

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist.

Pune, Maharastradevansu.makwana@kbl.co.in

kblin@kbl.co.inrajesh.nair@kbl.co.in

With ISI Mark

31/12/2019(Renewed

for 2 years)

SG Iron/ Cast steel (without

ISI Mark)Without ISI

8M/s. Calsens Pvt. Ltd.,

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-

711101ho@calsens.com

With ISI Mark

31/12/2019(Renewed

for 2 years)

13M/s. G.M. Engineering

Pvt. Ltd., Rajkot

Plot No. 2632, GIDC Lodhika, Metoda, Rajkot-360021

valve@gmengg.com

With ISI Mark

31/12/2019(Renewed

for 2 years)

Vendor Approval

Application received & shop survey order has

been placed

10M/s. Upadhaya Valves

Manufacturers Pvt. Ltd., Kolkatta

P 280 Benaras road, Howrah-711108

upadhayavalvesworks@gmail.com

sales@upadhayavalves.netinfo@upadhayavalves.net

With ISI Mark

31/12/2019(Renewed

for 2 years)

12M/s. Shiva Industries,

Jaipur

Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo,

Niwaroo Road, Jhotawara, Jaipur-302012

navinebus@yahoo.co.in

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

14M/s. Zoloto Industries,

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road,

Jalandhar-144026mktg@zolotovalves.com

50 to 400 mm - With ISI mark31/12/2020(Renewed for 2 yrs)

15M/s. Joshijampala

Engineering Pvt. Ltd., Satara

M-64, Additional M.I.D.C., Satara-415 004, Maharashtra

sales@joshijampala.comup to 400 mm

up to PN 1.6

Without ISI mark

31/12/2018 DELETED

16M/s. Perfect valves Pvt.

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-

144013jasbir@perfectvalve.com

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

Pressure Rating ammended vide

letter no. 301 dt. 19-10-2015

17M/s. Fouress Engineering

(I) Ltd., Aurangabad

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad-

431148ssk@fouressindia.com

feilbaroda@fouressind.com

Up to 750 mmUp to PN

1.6Without ISI

Mark31/12/2018 DELETED

18M/s. S & M Industrial Valves Ltd., Kolkata

Sadananda Industrial Estate, Balitikuri, Bakultala,

Howrah-711 113info@steammining.com

Up to 1000 mmup to PN

1.6Without ISI

19M/s. Sondhi

Industries,Jalandhar

C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab

sirvalve@gmail.com50 to 600 mm

up to PN 1.6

With ISI Mark

20M/s. Shree Krishna Industries, Howrah

P-261/1, Benaras Road, Belgachia, Howrah-711 108

skivalves@gmail.com50 to 1200 mm

PN 1.0 & PN 1.6

With ISI mark30/11/2019

Ltd., Ahmedabad

hawaengineers@gmail.comzafar@hawaengltd.com

1300 to 1600 mm

PN 0.6, PN 1.0, PN 1.6, PN 2.0, PN

2.5 & PN 3.0

Without ISI Mark

30/11/2019(Approval

for 3 years)-

Up to 900 mm PN 1.0 With ISI mark

Up to 1200 mm PN 1.0Without ISI

Up to 600 mm PN 1.6Without ISI

22M/s. Kalpana valves

Manufacturing co. (P) Ltd., Howrah

Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113

kalpanavalves@yahoo.co.in

30/06/2020(Approval

for 3 years)D/F

23M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105balajivalveskol@gmail.com

30/06/2020(Approval

for 3 years)D/F

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

2.5Without ISI

50 to 300 mmPN 1.0 &

PN 1.6 With ISI mark

06/03/2021(Approval

for 3 years)

300 to 1200 mm PN 1.0 &

PN 1.6 Without ISI

06/03/2021(Approval

for 3 years)

50 to 300 mmUp to PN

1.6With ISI mark

1.6Without ISI

50 to 1200 mmPN 1.0 &

2.0Without ISI

up to 800 mmUp to PN

1.6Without ISI

MarkResilient Seated

50 to 1200 mm PN 1.050 to 600 mm PN 1.6

1.6Without ISI

MarkResilient Seated

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

1.6Without ISI

30M/s. McWane Services Pvt. Ltd., Coimbatore

143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062

Sales@mcwaneservices.comUp to 1000 mm

PN 1.0 & PN 1.6

Without ISI Mark

06/03/2021(Approval

for 3 years)DI

1.6With ISI mark

1.6Without ISI

1.6With ISI mark

1.0Without ISI

50 to 300 mmPN 1.0 &

350 to 600 mmPN 1.0 &

PN 1.6 Without ISI

06/03/2021(Approval

for 3 years)

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-

144004info@nvrfittings.com

marketing@nvrfittings.com

M/s. Mac International, Jalandhar

30/06/2020(Approval

for 3 years)

Kashi pur, Das nagar, Howrah-711105 (WB)

jupitervalve@gmail.com,

M/s. Jupiter Engineering Co., Howrah

24 C.I /D.I.

With ISI Mark

M/s. Sigma Flow Control India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-

711 403stcworks@sigmaflow.in

MH-6 Chamrail, Near Kona Express Highway, Howrah-

711323info@kejriwalcastings.com

M/s. Kejriwal Castings Ltd., Howrah

06/03/2021(Approval

for 3 years)

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-

711402 nkdalui@gmail.com

nkdalui@cal2.vsnl.net.indaluisuman@gmail.com,

M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah

06/03/2021(Approval

for 3 years)

69A, Balitikuri Industrial Estate, Howrah-711113

sales@ivivalves.com

M/s. Indian Valve International, Howrah

With ISI mark 06/03/2021(Approval

for 3 years)

Ichhapur road, Canal Side, Santragachi, Howrah-711 104,

West Bengalkolkata@durgavalves.com,

info@durgavalves.com

M/s. Durga Valves PVt. Ltd., Howrah

06/03/2021(Approval

for 3 years)

G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008

industries.bir@gmail.com

M/s. Bir Industries, Jalandhar

06/03/2021(Approval

for 3 years)

41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal

kamalavalves@rediffmail.comkamala1@vsnl.net

M/s. Kamala Valves & Engineering Pvt. Ltd.,

Howrah32

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

50 to 1200 mm PN 1.0 With ISI mark

600 mm Up to PN

2.5Without ISI

50 to 600 mmPN 1.0 &

1.6Without ISI

36M/s. V-Tork Controls,

Coimbatore

SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,

Kurichi, Coimbatore-641021, Tamilnadu

sales@vtorkcontrols.comvtorkcontrols@gmail.com

1.6Without ISI

11/02/2022(Approval

for 3 years)

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

37M/s. Kamala Valves

Manufacturing Concern, Howrah

31/2, Y road, Belgachia, Kazipara, Howrah-711108

kamalkvmc@gmail.com

11/02/2022(Approval

for 3 years)With ISI mark

06/03/2021(Approval

for 3 years)

P-261/1, Benaras Road, Belgachia, Howrah-711108

skivalves@gmail.com

M/s. Shree Krishna Industries, Howrah

35M/s. Aarko

Manufacturing co., Jalandhar

75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -

144012info@aarko.insales@aarko.in

11/02/2022(Approval

for 3 years)

Size (mm) Class

1 2 3 4 5 6 7 8

Ltd., Jalandhar

50 to 600 mmPN 1.0 &

1.6With ISI Mark

31/01/2019(5 years

approval over)

works, Jalandhar

smw@rgindustriessachdeva.com50 to 350 mm

PN 1.0 & 1.6

Without ISI Mark

31/01/2019(5 years

approval over)

3M/s. H.Sarker &

Company, Howrah

Balitikuri, Bakultala, via Dasnagar, Howrah-711113

hsblt09@gmail.com50 to 600 mm

PN 1.0 & 1.6

With ISI Mark31/01/2019

(5 years approval over)

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal, Medak District-502307saleshyderabad@vag-group.com

50 to 1000 mm (DI)

PN 1.0 & 1.6

Without ISI Mark

2 years)

Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.

rdmulpardi@gmail.com50 to 600 mm

PN 0.6 to 3.0

Without ISI Mark

2 years)

As per IS 5312 (part 1 )

Ltd., Ahmedabad

hawaengineers@gmail.com50 to 600 mm

PN 1.0 & 1.6

Cast steel/S.G. Iron/ DI

(without ISI Mark)

50 to 300 mm PN 1.0

50 to 600 mm PN 1.6

Upto 800 mm PN 0.6

Upto 1500 mm PN 1.0

Upto 1500 mm PN 1.6

Upto 900 mm PN 2.0

Upto 1200 mm PN 3.0

Works, Jaipur

bewfoundries@hotmail.com50 to 300 mm

PN 1.0 & 1.6

Without ISI mark31/12/2019(Renewed for 2 years)

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Non Return (Reflux) Valves (IS:5312) as per Vendor Selection

Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Valid up to Date

RemarksISI Mark

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,

Taluka-Shirpur, Dist. Pune, Maharastradevansu.makwana@kbl.co.in

Without ISI Mark

2 years)

S.G. Iron/ Cast Iron

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-711101

ho@calsens.comWith ISI Mark

2 years)

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

50 to 300 mmPN 1.0 &

1.6Without ISI mark

350 to 600 mmPN 1.0 &

1.6Without ISI mark

30/06/2020 (Approval for

3 years)

Pvt. Ltd., Rajkot

valve@gmengg.com50 to 600 mm

PN 1.0 & PN 1.6

Without ISI mark31/12/2019(Renewed for 2 years)

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026

mktg@zolotovalves.com50 to 300 mm

Without ISI Mark

2 yrs)

13M/s. Joshijampala

sales@joshijampala.comUp to 250 mm

up to PN 1.6

Without ISI Mark

31/12/2018 DELETED

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-144013jasbir@perfectvalve.com

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark

2 yrs)-

15M/s. Fouress

Engineering (I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-560058info@fouressindia.com

mohanram@fouressindia.com

450 to 1800 mm

Up to PN 16 (16 bar)

Without ISI Mark

2 yrs)

Single Door & Multi door

16M/s. Flownix valves Pvt.

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114

flownixvalves@gmail.comUp to 600 mm

up to 24 kg/sqcm

Without ISI Mark

up to 1200 mm

up to PN 1.6

Without ISI Mark

Dual plate check valve

up to 500 mmup to PN

1.6Without ISI

MarkSwing Type check valve

2 yrs)17

M/s. S & M Industrial Valves Ltd., Kolkata

Jaipur

Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo

Road, Jhotawara, Jaipur-302012navinebus@yahoo.co.in

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

150 to 300 mm PN 1.0

50 to 125 mm PN 1.6

350 to 400 mm Up to PN

1.6 Without ISI

PN 1.0 & PN 1.6

Without ISI Mark

3 years)

Ltd., Ahmedabad

650 to 1200 mm

PN 2.0, PN 2.5 & PN

Without ISI Mark

3 years)

1.6With ISI Mark

CI D/F Swing Check

Up o 1000 mm PN 1.0Without ISI

CI D/F Multi door Swing

22M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105

balajivalveskol@gmail.comUp to 600 mm

Up to PN 1.6

CI D/F Swing Check

Up to 600 mm PN 1.0 &

PN 1.6With ISI Mark

up to 1200 mm

PN 1.6Without ISI

50 to 900 mmPN 1.0 &

PN 1.6Without ISI

40 to 300 mm -Without ISI

MarkDI Resilient

Seated

1.6With ISI Mark

1.6Without ISI

Up to 600 mm As per IS 5312

(part 1 ) Up to 1400

mm As per IS 5312

(part 2)

50 to 600 mm PN 1.0 &

PN 1.6With ISI Mark Single Door

Up to 1500 mm

UP to PN 1.6

Without ISI markSingle/ Multi

Up to 600 mm PN 1.0 With ISI Mark

1.6Without ISI mark

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark

350 to 500 mmPN 1.0 &

PN 1.6Without ISI mark

50 to 600 mm UP to PN

1.6With ISI Mark

500 to 1000 mm

UP to PN 1.6

Without ISI mark

With ISI MarkSwing Check

sirvalve@gmail.com

M/s. Sondhi Industries,Jalandhar

1830-6-2021

(Renewed for 2 yrs)

Swing Check 06/03/2021

Swing Check type

3 years)

23M/s. Jupiter Engineering

Co., Howrah

3 years)

M/s. Sigma Flow Control India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403

stcworks@sigmaflow.in24

3 years)

M/s. Mac International, Jalandhar

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004

info@nvrfittings.commarketing@nvrfittings.com

Swing Check06/03/2021

MH-6 Chamrail, Near Kona Express Highway, Howrah-711323

info@kejriwalcastings.com27

3 years)

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402

nkdalui@gmail.comnkdalui@cal2.vsnl.net.in

Up to PN 1.6

Without ISI Mark

3 years)

Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal

kolkata@durgavalves.com, info@durgavalves.com

Sales@mcwaneservices.com

3 years)

DISwing Check

sales@ivivalves.com

3 years)Swing Check

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

31M/s. Kamala Valves & Engineering Pvt. Ltd.,

Howrah

50 to 800 mmUP to PN

1.6Without ISI mark

3 years)Swing Check

32M/s. Bir Industries,

Jalandhar

industries.bir@gmail.com50 to 300 mm

PN 1.0 & PN 1.6

Swing Check

50 to 600 mm PN 1.0 &

PN 1.6With ISI Mark

Up to 700 mm PN 1.0 Without ISI mark

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark

Up to 600 mm Up to PN

1.6Without ISI mark

Coimbatore

SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-641021, Tamilnadu

2.5without ISI mark

3 years)Swing Check

kamalkvmc@gmail.com50 to 600 mm

PN 1.0 & PN 1.6

34M/s. Aarko

75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -144012

info@aarko.insales@aarko.in

3 years)

3 years)33

skivalves@gmail.com

Size (mm) Class

1 2 3 4 5 6 7 8

40 to 600 mm PN 1.0

40 to 300 mm PN 1.6

works, Jalandhar

smw@rgindustriessachdeva.com40 to 450 mm

PN 1.0 & 1.6

Without ISI mark

31/01/2019(5 years approval

40 to 2600 mm 150#Without ISI

Class as per API Standard

40 to 2000 mmPN 1.0 &

PN 1.6With ISI Mark

31/12/2019(Renewed

for 2 years)-

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,

Medak District-502307saleshyderabad@vag-group.com

200 to 4000 mm (DI)

PN 1.0 & 1.6

Without ISI mark

5M/s. Delval Flow

Controls Pvt. Ltd., Pune

GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka Khandala, District-

Satara-412801salesindia@deltechcontrols.com

apatil@deltechcontrols.com

80 to 2200 mm PN 10

Without ISI mark

(As per BS EN 593/API 609

Specification)

31/12/2019(Renewed

for 2 years)-

Valsad (Plant-I)

Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, Gujarat

rdmulpardi@gmail.comrdmultiples@gmail.com

50 to 1000 mmPN 0.6 to

3.0Without ISI

31/12/2019(Renewed

for 2 years)

As per IS 13095/ BS 5155-593 / AWWA C 504

Valsad (Plant -2)

rdmulpardi@gmail.com1000 to 2400 mm

PN 0.6 to 3.0

Without ISI Mark

31/12/2019(Renewed

for 2 years)

As per IS 13095/ BS 5155-593 / AWWA C 504

List of Approved Vendors of GWSSB for supply of Butterfly Valves (IS 13095) as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Valid up to Date

RemarksISI Mark

Ltd., Jalandhar

With ISI mark

3M/s. GM Engineering ,

Rajkot

Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-360021

valve@gmengg.com

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

40 to 600 mm PN 1.0 With ISI Mark

Wafer Short, Double flangedCS/S.G. Iron/M.S. Fabricated/DI

40 to 300 mm PN 1.6 With ISI Mark

CS/S.G. Iron/M.S. Fabricated/DI Wafer Short

650 to 2000 mmPN 1.0 &

PN 1.6

Without ISI Mark

2100 to 2600 mmPN 1.0 &

PN 1.6

Without ISI Mark

( As per AWWA C504 )

40 to 300 mmPN 1.0 &

1.6Wafer Type

40 to 1200 mmPN 1.0 &

1.6Double Flange

upto 3800 mm PN 0.6

upto 3000 mm PN 1.0

upto 2700 mm PN 1.6

upto 2600 mm PN 2.0

upto 800 mm PN 2.5

upto 1200 mm PN 3.0

upto 650 mm PN 4.0

50 to 300 mmPN 1.0 to

Wafer Short (resilient Seated)

200 to 1200 mmPN 1.0 to

Double flange short, (resilient

Seated)

12M/s. Intervalve (India)

Ltd., Pune

94/1 Manjari, Off Soli, Poonawalla Road, Pune-412307

baroda@poonawallagroup.com40 to 2400 mm

PN 0.6, PN 1.0, PN 1.6

Without ISI mark

(As per IS 13095/ BSEN

593/API -609 / AWWA C 504)

CI, SGI (DI), M.S. Fabricated

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026

mktg@zolotovalves.com40 to 600 mm -

Without ISI Mark

14M/s. Joshijampala

sales@joshijampala.comup to 2800 mm

up to PN 1.6

Without ISI Mark

31/12/2018 DELETED

CS/S.G. Iron/M.S.

Fabricated/DI Double flange

With ISI Mark

With ISI Mark31/12/2019(Renewed

for 2 years)

Ltd., Ahmedabad

hawaengineers@gmail.com

31/12/2019(Renewed

for 2 years)

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-

711101ho@calsens.com

Without ISI Mark

31/12/2019(Renewed

for 2 years)

11M/s. Upadhaya valves

P 280 Benaras road, Howrah-711108upadhayavalvesworks@gmail.com

Ltd., Pune

31/12/2019(Renewed

for 2 years)

SG Iron/ Cast steel

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-144013jasbir@perfectvalve.com

40 to 300 mm & 350 to 600 mm

PN 1.0 & PN 1.6

With ISI Mark31/12/2020(Renewed for 2 yrs)

(I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-560058info@fouressindia.com

40 (40 Bar)

Without ISI Mark

up to 900 mmup to PN

1.6Without ISI

40 to 300 mmup to PN

1.6With ISI Mark

350 to 700 mmup to PN

1.6Without ISI

19M/s. Dynamic Valves Pvt.

Ltd., Mumbai

R-353, Rabale MIDC, Navi Mumbai-400701

info@dynamicvalves.comUp to 1800 mm

up to PN 1.6

Without ISI Mark

PN 1.0 & PN 1.6

Without ISI Mark

3 years)-

350 to 600 mm PN 1.6

40 to 1200 mmPN 2.0, PN 2.5 & PN

2700 to 3000 mmPN 1.0 &

PN 1.6

Jaipur

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,

Jaipur-302012navinebus@yahoo.co.in

50 to 700 mmPN 1.0 &

PN 1.6Without ISI

3 years)

2.5Without ISI

1.6With ISI mark

1.6Without ISI

M/s. Rotex Manufacturers &

Engineering Pvt. Ltd., Thane (Maharashtra)

Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra

sales-bby@rotexindia.comrotexdbl@rotexindia.com

16Without ISI

3 years)

40 to 1200 mm PN 1.040 to 2000 mm PN 1.6

2.5Without ISI

27M/s. Sigma Flow Control

India Ltd., Kolkata

stcworks@sigmaflow.in50 to 1500 mm

PN 1.0 & PN 1.6

Without ISI mark

3 years)

Ltd., Ahmedabad

sirvalve@gmail.com

C.I./ D.I.30/06/2020(Approval for

3 years)

3 years)24

M/s. Shree Balaji Industries, Howrah

balajivalveskol@gmail.com

M/s. Kalpana valves Manufacturing co. (P)

Ltd., Howrah

kalpanavalves@yahoo.co.in23

Without ISI mark

-30/11/2019

M/s. Sondhi Industries, Jalandhar

Co., Howrah

With ISI mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

1.6With ISI mark

1.6Without ISI

350 to 2000 mm PN 1.0 &

PN 1.6 With ISI mark CL-125/ CL-150

2.0Without ISI

80 to 1200 mmPN 1.0 &

PN 1.6With ISI mark

1.6Without ISI

markDouble Flange

40 to 1200 mmPN 1.0 &

PN 1.6

1400 to 2000 mm PN 1.6

2.0Without ISI

40 to 600 mmPN 1.0 &

700 to 2000 mmPN 1.0, PN 1.6 & PN

Without ISI mark

1.6With ISI mark

1.6Without ISI

1.6With ISI mark

1.6Without ISI

Jalandhar

PN 1.0 & PN 1.6

Without ISI mark

3 years)

50 to 1200 mm PN 1.0 With ISI mark50 to 600 mm PN 1.6 With ISI mark

2.5Without ISI

1.6without ISI

Coimbatore

SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-641021, Tamilnadu

Up to 1000 mmup to PN

1.0Without ISI

3 years)

kamalkvmc@gmail.com40 to 1200 mm

PN 1.0 & PN 1.6

37M/s. Aarko

3 years)

28M/s. Mac International,

Jalandhar

3 years)

nkdalui@gmail.comnkdalui@cal2.vsnl.net.indaluisuman@gmail.com,

3 years)29

sales@ivivalves.com33

3 years)

M/s. McWane Services Pvt. Ltd., Coimbatore

32143/2A, Anna Nagar Road, Neelambur,

Coimbatore-641062Sales@mcwaneservices.com

3 years)DI

info@kejriwalcastings.com

Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West

Bengalkolkata@durgavalves.com,

3 years)

With ISI mark 06/03/2021(Approval for

3 years)

skivalves@gmail.com36

Howrah

3 years)34

Size (mm) Class

1 2 3 4 5 6 7 8 9

15 to 50 mmPN 1.0 &

1.6With ISI mark

50 to 200 mmPN 1.0 &

1.6Kinetic Air

valveWithout ISI

15 to 50 mmPN 1.0 &

1.6Without ISI

50 to 200 mmPN 1.0 &

1.6Kinetic Air

valveWithout ISI

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,

Medak District-502307saleshyderabad@vag-group.com

32 to 200 mm (D.I.)

PN 1.0 & 1.6

Without ISI mark

31/01/2019(5 years Approval

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

25 to 50 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

20 to 200 mmPN 0.6 to

Without ISI mark

20 to 300 mmPN 0.6 to

3.0Kinetic

Without ISI mark

As per AWWA C-

Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra-

363310, Gujaratbharatengiworks@yahoo.com

M/s. Bharat Engineering Works, Dhrangadhra

Valsad (Plant -2)

rdmulpardi@gmail.com

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Air Valves (IS 14845) as per Vendor Selection Report submitted by

Different TPI (As on dt. 23-1-2020)

Sr. No.

Valid up to Date

RemarksISI MarkType

Ltd., Jalandhar

smw@rgindustriessachdeva.com

M/s. Sachdeva Metal works, Jalandhar

31/12/2019(renewed for

2 years)

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

15 to 50 mmPN 1.0,

1.6, 2.0 & 2.5

S-1 & S-2Without ISI

markCS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

DS-2 Without ISI

markCS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

Double Acting

Kinetic DK Type

Without ISI mark

CS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

Double Acting

Temper Proof

Without ISI mark

As per AWWA C-

512-92CS/S.G. Iron/DI

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-711101

ho@calsens.com40 to 200 mm

PN 1.0 & 1.6

DS1, DS2 & DK

Without ISI mark

2 years)-

upto 200 mmPN 16, PN

20 , PN 30

upto 250 mm PN 10

upto 200 mm PN 4.0

upto 40 mmPN 1.0 &

upto 50 mmPN 1.0 &

50 to 200 mmPN 1.0 &

1.6DS2 & DK

15 to 80 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

As per AWWA C -

Ltd., Ahmedabad

hawaengineers@gmail.com

2 years)

Resilient Seated

SG iron/ Cast steel

9M/s. Upadhaya valves

P 280 Benaras road, Howrah-711108upadhayavalvesworks@gmail.com

With ISI mark

2 years)

Works, Jaipur

bewfoundries@hotmail.com

2 years)

Ltd., Pune

KineticWithout ISI

2 years)

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

15 to 80 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

As per AWWA C -

25 to 50 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Kinetic

Without ISI mark

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148

ssk@fouressindia.comfeilbaroda@fouressind.com

up to 300 mmUp to PN

Without ISI mark

31/12/2018 DELETED

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114

flownixvalves@gmail.comup to 400 mm

Up to 24 kg/sqcm

-Without ISI

2 yrs)-

Without ISI mark

2 yrs)-

16M/s. Sondhi

sirvalve@gmail.comUp to 200 mm

Up to PN 1.6

-Without ISI

2 yrs)-

skivalves@gmail.com25 to 200 mm - -

Without ISI mark

3 years)-

15 to 40 mmPN 1.0 &

PN 1.6S1

25 to 50 mmPN 1.0 &

PN 1.6S2

40 to 200 mmPN 1.0 &

PN 1.6DK Type

40 to 200 mmPN 1.0 &

PN 1.6DS1

40 to 200 mmPN 1.0 &

PN 1.6DS2

15 to 200 mmPN 2.0 &

PN 2.5-

Without ISI mark

kalpanavalves@yahoo.co.inUp to 150 mm PN 1.0 -

Without ISI mark

3 years)

20M/s. Shree Balaji

Industries, Howrah

balajivalveskol@gmail.comUp to 200 mm

Up to PN 1.6

- With ISI mark30/06/2020

-With ISI mark

Ltd., Ahmedabad

Jaipur

valve@gmengg.com

2 years)

3 years)

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,

Jaipur-302012navinebus@yahoo.co.in

2 years)

Pvt. Ltd., Rajkot

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra

sales-bby@rotexindia.comrotexdbl@rotexindia.com

Without ISI mark

3 years)

40 to 200 mmPN 1.0 &

PN 1.6S1, S2, DS1, DS2 & DK

With ISI mark -

2.5Temper

ProofWithout ISI

As per AWWA C -

India Ltd., Kolkata

stcworks@sigmaflow.in40 to 200 mm -

Temper Proof

Without ISI mark

3 years)

As per AWWA C -

Jalandhar

Without ISI mark

3 years)

50 to 200 mmPN 1.0 &

PN 1.6- With ISI Mark

25 to 40 mmPN 1.0 &

PN 1.6-

Without ISI mark

50 to 200 mmPN 1.0 &

PN 1.6Temper

ProofWithout ISI

As per AWWA C -512

15 to 40 mmPN 1.0 &

PN 1.6S-1

25 to 50 mmPN 1.0 &

PN 1.6S-2

40 to 200 mmPN 1.0 &

PN 1.6DS-1, DS-2 ,

Temper Proof

(Kinetic Type)

Without ISI mark

As per AWWA C -

40 to 200 mmPN 1.0 &

PN 1.6DK Type With ISI mark

Without ISI mark

40 to 300 mm PN 1.0Temper

ProofWithout ISI

As per AWWA C -

Up to 200 mmPN 1.0 &

PN 1.6-

Without ISI mark

Up to 200 mmPN 1.0 &

PN 1.6Temper

ProofWithout ISI

DI (As per AWWA C -

15 to 25 mm PN 1.0 Single ActingWithout ISI

1.6DS1, DS2 &

KineticWithout ISI

Temper Proof

(kinetic)

Without ISI mark

26M/s. Kejriwal Castings

Ltd., Howrah

info@kejriwalcastings.com

3 years)

With ISI mark

3 years)

nkdalui@gmail.comnkdalui@cal2.vsnl.net.indaluisuman@gmail.com,

3 years)22

M/s. Jupiter Engineering Co., Howrah

Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal

kolkata@durgavalves.com, info@durgavalves.com

2706/03/2021

-69A, Balitikuri Industrial Estate, Howrah-

711113sales@ivivalves.com

3 years)

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

1.6DS 1, DS 2 &

DKWith ISI mark

1.6Single & Double

Without ISI mark

1.6Temper

Proof Without ISI

Jalandhar

PN 1.0 & PN 1.6

Temper Proof

Without ISI mark

3 years)

As per AWWA C -

15 to 200 mmPN 1.0 &

PN 1.6- With ISI mark

3 years)

2.5Temper

Proof Without ISI

3 years)

As per AWWA C -

Up to 50 mmUp to PN

1.6Screwed

SingleWithout ISI

1.6Flanged Double

Without ISI mark

Coimbatore

SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-

641021, Tamilnadusales@vtorkcontrols.comvtorkcontrols@gmail.com

Without ISI mark

3 years)

15 to 200 mmPN 1.0 &

PN 1.6- With ISI mark

Up to 200 mm -Temper

proofWithout ISI

33M/s. Aarko

3 years)

skivalves@gmail.com32

kamalkvmc@gmail.com

3 years)

As per AWWA C -

Howrah

Size (mm) Class1 2 3 4 5 6 7 8 9

15 mm to 600 mm

150# to 2500#

SluiceWithout ISI

15 mm to 600 mm

150# to 2500#

ConduitWithout ISI

upto 700 mm 150# -

Up to 500 mm

300# & 600#

Up to 100 mm

900# -

Jalandhar

50 to 300 mm

- SluiceWithout ISI

2 yrs)-

4M/s. Fouress

Engineering (I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-

560058info@fouressindia.com

50 to 3600 mm

Up to PN 16 (16

bar)Knife Edge

Without ISI mark

2 yrs)-

Up to 300 mm

Up To PN 1.6

Knife EdgeWithout ISI

2 yrs)-

6M/s. Orbinox India Pvt.

Ltd., Coimbatore

S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641

021india@orbinox.com

bonsae.india@orbinox.commarketingmanager.india@orbi

nox.com

50 to 1200 mm

- Knife EdgeWithout ISI

2 yrs)-

Ltd., Ahmedabad

40 to 1000 mm

PN 1.0 & PN 1.6

3 years)-

Co., Howrah

Up to 800 mm

PN 1.0 Knife EdgeWithout ISI

3 years)

as per MSS SP -81 / AWWA C520

Class AS per API Standard1

M/s. GM Engineering , Rajkot

valve@gmengg.com

2 years)

As per API 600(SG Iron/ Cast

steel)2

M/s. Kirloskar Brothers Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no.

252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune, Maharastradevansu.makwana@kbl.co.in

Without ISI mark

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Gate Valves as per Vendor Selection Report submitted by

Different TPI (As on dt. 23-1-2020)Sr. No.

Valid up to RemarksType ISI Mark

Size (mm) Class1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to RemarksType ISI Mark

India Ltd., Kolkata

40 to 1000 mm

-Resilient Seated

Without ISI mark

3 years)-

Ltd., Howrah

50 to 1200 mm

Up to PN 1.6

3 years)-

11M/s. Durga Valves PVt.

Ltd., Howrah

Up to 900 mm

PN 1.6 Knife EdgeWithout ISI

3 years)as per MSS SP -81

12M/s. Aarko

Up to 1000 mm

Up to PN 1.6

Resilient Seated

Without ISI mark

3 years)as per BS 5163

Coimbatore

up to 1200 mm

Up to PN 2.5

3 years)

As per AWWa C520-10 & MSS

31/2, Y road, Belgachia, Kazipara, Howrah-711108kamalkvmc@gmail.com

up to 1200 mm

- -Without ISI

3 years)

Size Class1 2 3 4 5 6 7 8 9

Valsad (Plant -2)

Up to 1500 x 1500 mm

PN 0.6 to 3.0

Sluice (Single faced

circular/Rectangular

Without ISI mark

2 years)

As per BS 5155-593/ AWWA C

2M/s. Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo

Hospital, sanwer Road, Indore-453111 (MP)

info@jashindia.com

150 x 150 mm to 3000 x 5000 mm

- -Without ISI

As per IS 13349

Up to 1200 x 1200 mm

- Sluice Without ISI

4M/s. Bharat Industrial corporation, Ghaziabad (UP)

D-131, Industrial Area, Bulandshahr Road, Ghaziabad-

201 009, Uttar Pradeshbicghaziabad@gmail.com

Up to 2500 x 3000 mm

- SluiceWithout ISI

As per IS 13349

Co., Howrah

Up to 2000 mm

III SluiceWithout ISI

30/06/2020(Approval for 3 years)

As per IS 13349

Ltd., Howrah

150 x 150 mm to 1500 x 1500 mm

Up to PN 1.6

SluiceWithout ISI

Ltd., Howrah

2400 mm x 2800 mm

- SluiceWithout ISI

As per IS 13349

8M/s. Indian Valve

International, Howrah

sales@ivivalves.com

Up to 1200 mm x 1200

mm- Sluice

Without ISI mark

As per IS 13349

Howrah

800 mm x 800 mm

- SluiceWithout ISI

As per IS 13349

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Sluice Gate as per Vendor Selection Report submitted by TPI (As

on dt. 23-1-2020)Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class

Type ISI MarkApproval Valid

up to Date Remarks

Size Class1 2 3 4 5 6 7 8 9

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class

Type ISI MarkApproval Valid

up to Date Remarks

Coimbatore

Up to 1800 x 1900 mm

Up to PN 1.0

SluiceWithout ISI

As per IS 13349

Size (mm) Class

1 2 3 4 5 6 7 8

6 mm to 700 mm

150# to 900#

Without ISI mark

Class AS per API Standard

50 to 1500 mm

PN 1.6Without ISI

31/12/2019(Renewed

for 2 years)

Dual plateAs per API 594

Valsad (Plant-I)

Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, Gujaratrdmulpardi@gmail.comrdmultiples@gmail.com

50 to 1000 mm

PN 0.6 to 3.0

Without ISI mark

1000 to 2400 mm

PN 0.6 to 3.0

Without ISI mark

600 to 1200 mm

PN 0.6 to 3.0

Without ISI mark

Multi Door

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, Ahmedabadhawaengineers@gmail.com

50 to 2000 mm

PN 1.0, 1.6, 2.0 &

Without ISI mark

Dual plate (Double Flange)As per API 594

upto 1500 mm

upto 1100 mm

upto 1500 mm

upto 900 mm

upto 600 mm

upto 750 mm

150# & 300#

upto 300 mm

upto 100 mm

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Check Valves as per Vendor Selection Report

submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Approval

Valid up to Date

RemarksISI Mark

31/12/2019(Renewed

for 2 years)

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist.

Pune, Maharastradevansu.makwana@kbl.co.in

Without ISI mark

31/12/2019(Renewed

for 2 years)

Rajkot

valve@gmengg.com

Valsad (Plant -2)

Dual plateAs per API 594 (SG Iron/ Cast

steel)

Without ISI mark

Check valveBS:-1868

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

50 to 500 mm

PN 1.0 & PN 1.6

Without ISI mark

31/12/2019(Renewed

for 2 years)

Dual PlateAs per API 594

600 to 700 mm

PN 1.0 & PN 1.6

Without ISI mark

30/06/2020(Approval

for 3 years)

up to 800 mm

up to PN 1.6

Without ISI mark

up to 1300 mm

up to PN 1.6

Without ISI mark

Jalandhar

15 to 100 mm

-with ISI

As per IS 778

9M/s. Sondhi

C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-

144004, Punjabsirvalve@gmail.com

Up to 400 mm

-Without ISI

Dual Plate AS per API 594 &

10M/s. Orbinox India Pvt.

Ltd., Coimbatore

S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641

021india@orbinox.com

bonsae.india@orbinox.commarketingmanager.india@orbin

ox.com

50 to 800 mm

-Without ISI

skivalves@gmail.com

50 to 700 mm

-Without ISI

30/11/2019(Approval

for 3 years)

Dual Plate AS per API 594

Ltd., Ahmedabad

2100 to 2400 mm

PN 1.0 & PN 1.6

Without ISI mark

30/11/2019(Approval

for 3 years)

Dual Plate

Up to 600 mm

up to PN 1.6

Without ISI mark

30/06/2020(Approval

for 3 years)

14M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105balajivalveskol@gmail.com

Up to 600 mm

up to PN 1.6

Without ISI mark

30/06/2020(Approval

for 3 years)

Co., Howrah

Up to 1400 mm

Up to PN 2.5

Without ISI mark

30/06/2020(Approval

for 3 years)

India Ltd., Kolkata

50 to 300 mm

-Without ISI

06/03/2021(Approval

for 3 years)

Jalandhar

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-

144004info@nvrfittings.com

marketing@nvrfittings.com

50 to 450 mm

Up to PN 1.6

Without ISI mark

06/03/2021(Approval

for 3 years)

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad-

431148ssk@fouressindia.com

31/12/2018 DELETED

Jaipur

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara, Jaipur-302012navinebus@yahoo.co.in

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

18M/s. G.M. Dalui & Sons

(Pvt.) Ltd., Howrah

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-

711402 nkdalui@gmail.com

nkdalui@cal2.vsnl.net.indaluisuman@gmail.com,

Up to 3000 mm

Up to PN 1.6

Without ISI mark

06/03/2021(Approval

for 3 years)

Ltd., Howrah

50 to 1200 mm

Up to PN 1.6

Without ISI mark

06/03/2021(Approval

for 3 years)

Ltd., Howrah

50 to 1400 mm

Up to PN 2.0

Without ISI mark

06/03/2021(Approval

for 3 years)

50 to 700 mm

PN 1.0, PN 1.6 &

PN 2.5

Without ISI mark

06/03/2021(Approval

for 3 years)

DI Dual Plate AS per API 594

22M/s. Indian Valve

International, Howrah

sales@ivivalves.com

50 to 1200 mm

Up to PN 1.6

Without ISI mark

06/03/2021(Approval

for 3 years)

Howrah

50 to 800 mm

Up to PN 1.6

Without ISI mark

06/03/2021(Approval

for 3 years)

skivalves@gmail.com

Up to 900 mm

Up to PN 2.5

Without ISI mark

06/03/2021(Approval

for 3 years)

25M/s. Aarko

up to 300 mm

Up to PN 1.6

Without ISI mark

11/02/2022(Approval

for 3 years)

Coimbatore

Up to 80 mm

Up to PN 1.6

Without ISI mark

11/02/2022(Approval

for 3 years)

Up to 1000 mm

Without ISI mark

11/02/2022(Approval

for 3 years)Dual Plate

Approved Size

Size (mm)

1 2 3 4 5 7 8 9

Zero Velocity100 mm to 2400

Air cushion valve 100 to 300 mm -

Zero velocity valve (PSLC)

500 to 2350 mm -

Air Cushion valves (QRDA)

100 to 400 mm -

Zero Velocity Up to 2700 mmup to 30 kg./sqcm

Air cushion valve up to 400 mmup to 30 kg./sqcm

Zero Velocity Up to 1000 mm up to 2.5

Air cushion valve up to 300 mm up to 1.6

Zero Velocity Up to 1400 mm up to PN 1.6

Air cushion valve up to 300 mm up to PN 1.6

Zero Velocity Up to 1000 mm up to PN 2.5

Air cushion valve up to 200 mm up to PN 2.5

List of Approved Vendors of GWSSB for supply of Water Hammer Devices (Zero Velocity Valves & Air cushion valves) as per Vendor Selection Report submitted by TPI (As on dt. 23-1-2020)

Sr. No.

Name of Agency Adress/E-mail Address Type of Valves ISI MarkApproval

Valid up to Date

Remarks

1M/s Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo

Hospital, sanwer Road, Indore-453111 (MP)

info@jashindia.com

31/12/2019(Renewed

for 2 years)-

2M/s. Megha Engineering

& Infrastructure Ltd., Hyderabad

Plot No. 34/B, IDA Jeedimetla, Hyderabad-500055, AP

rajgopal@meilgroup.cominfo@meil.in

31-12-2017 DELETED

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade,

Pune-412114flownixvalves@gmail.com

Co., Howrah

3 years)

3 years)5

3 years)6

skivalves@gmail.com

Approved Size

Size (mm)

1 2 3 4 5 7 8 9

Sr. No.

Name of Agency Adress/E-mail Address Type of Valves ISI MarkApproval

Valid up to Date

Remarks

7M/s. Kamala Valves

Zero Velocity Valve

Up to 900 mm -11/02/2022

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & ClassApproval

Valid up to Date

Remarks

1 2 3 4 5 6

1M/s. Cair Euromatic

Automation Pvt. Ltd., Ahmedabad

Plot No. 178/179, Shiv Shakti Estate, Nr. V-Trans, Narol Road, Ahmedabad-

382 405info@cairindia.in

cairvalve@gmail.com

(A) Rotary Electrical Actuators:- Rotary Electrical Actuator for AWWA Butterfly Valve Double flanged, High-Performance Butterfly valve, Ball vale, 2-way ball valve, 3-way ball valve, and rotary Electrical Actuator for 4-way ball valve, fire safe design ball valve, fabricated butterfly valve

(B) Multi-turn Electrical Actuators:- Multi turn actuator operated sluice valve double flanged, gate valve double flanged, knife-gate valve, globe valve, control valve

Item Range:- (i) Three phase, single phase electrical actuators quarter turn (WP & Ex proof) Torque range:- 35 NM to 5000 NM (ii) Multi turn electrical actuators (WP & Flame proof) torque range;- 100 NM to 24000 NM(iii) Single phase electrical actuators (Linear) torque range:-150 kgf to 2500 kgf

31-1-2019(5 years

Approval over)

Vendor Approval

Application received &

shop survey order has

been placed

2M/s. Rotork Control (I)

Pvt. Ltd., Chennai

28-B, Ambattur Industrial Estate (North) Chennai-

600098amit.galphade@rotork.co

mkumar.mahalingam@rotor

(A) Single Phase Actuator with electrically operated and remotely controlled quarter turn & multi turnCapacity:- 30 Nm to 300 Nm (3 kgm to 30 kgm)(B) Three Phase Actuators with electrically operated and remotely controlled quarter turn & multi turn Capacity:- 30 Nm to 1000 Nm (3 kgm to 102 kgm)

31-12-2019(Renewed for 2 years)

3M/s. Auma India Pvt.

Ltd., Banglore

Plot no. 39-B Phase, Pennya Industrial Area,

Banglore-560058balachandramn@auma.co.i

nncpatil@aumaindia.com

Electric Actuators:-(a) Range From 30 Nm to 1000 Nm(b) 2000 Nm to 16000 Nm with electronic control. (Optional)

4M/s. Marsh Automation

Pvt. Ltd., Pune

98A/25A, Hadapsar Industrial Estate, Pune-411

013rsdeshpande@marshauto

mation.commarshautomation@gmail.c

omvikrant.sec@hotmail.com

Three Phase Electrical Actuators of Torque Output Upto:- 1000 NM

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Motorized Valve Actuators as per Vendor Selection Report

submitted by Different TPI (As on dt. 23-1-2020)

Size (mm) Class

1 2 3 4 5 6 7 8 9

Ltd., Jalandhar

Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-

144013rsj@kartarvalves.com

tilak@kartarvalves.com

Ball Valve15 to 100

mmCL-125 &

CL-250With ISI mark

Ball Valve6 mm to 300

mm150# to 2500#

Ball Valve6 mm to 600

mm150# to

Globe Valve15 mm to 300 mm

150# to 900#

Strainer Valve15 mm to 300 mm

Plug valve15 mm to 200 mm

Needle Valve6 mm to 50

mm150# to

Floating Ball Valve 15 to 300

mm600#

Without ISI mark

AS per API 609

Trunnion Mounted Ball

up to 400 mm

600#Without ISI

AS per API 609

upto 600 mm

PN 0.2

up to 400 mm

PN 1.0

upto 200 mm125#

upto 500 mm150#

upto 200 mm300#

Rajkot

Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-

360021valve@gmengg.com

AS per API Standard

Without ISI mark

3M/s. Delval Flow

Controls Pvt. Ltd., Pune

GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka

Khandala, District-Satara-412801

salesindia@deltechcontrols.com

apatil@deltechcontrols.com

31/12/2019(Renewed

for 2 years)

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune,

Maharastradevansu.makwana@kbl.co.i

nkblin@kbl.co.in

rajesh.nair@kbl.co.in

Foot valveWithout ISI

List of Approved Vendors of GWSSB for supply of Other Valves as per Vendor Selection Report submitted by Different TPI (As on dt. 23-1-2020)

Sr. No.

Date Remarks Type of Valves ISI Mark

CI/ S.G. Iron / Cast steel As per IS:

Globe valveWithout ISI

As per BS: 1873 ( CI/ SG Iron /

Cast Steel)

31/12/2019(Renewed

for 2 years)

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Pressure Relief valves/ Safety

Valves

Up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Pressure Reducing valve

up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Float Valvesup to 600

mmPN 0.6 to

PN 3.0Without ISI

Pressure Sustaining Valves

up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Ball valve15 to 100

mmWithout ISI

Gun metal Gate valve, Globe valve

15 to 100 mm

With ISI markAs per IS

7M/s. Perfect Valves PVt.

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex,

Jalandhar-144013jasbir@perfectvalve.com

Ball valve 1/2" to 4" Class 125 With ISI mark31/12/2020(Renewed for 2 yrs)

AS per IS 9890:1981

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, Ahmedabadhawaengineers@gmail.com

zafar@hawaengltd.com

Foot valve15 to 600

PN 1.0. PN 1.6 &

PN 2.0

Without ISI mark

30/11/2019(Approval

for 3 years)-

Manpada Road, Near Bhopar Village, Dombivli (E),

Dist. Thane, Maharshtrasales-bby@rotexindia.comrotexdbl@rotexindia.com

Ball ValveUp to 600

mmUp to PN

21Without ISI

30/06/2020(Approval

for 3 years)-

Ltd., Howrah

Foot valve50 to 1200

mmup to PN

1.6Without ISI

06/03/2021(Approval

for 3 years)

Pressure RElief valves

up to 200 mm

up to PN 1.6

Without ISI mark

Float Valvesup to 200

Without ISI mark

06/03/2021(Approval

for 3 years)11

5M/s. Aira Euro

Automation Pvt. Ltd., Ahmedabad

Plot no. 123-124, Aira Estate, B/h. Security Estate, Nr. Kashiram Textile Mills, Narol Road, Ahmedabad-

380 028airaeuroautomation@gmail

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar

Road, Jalandhar-144026mktg@zolotovalves.com

Ichhapur road, Canal Side, Santragachi, Howrah-711

104, West Bengalkolkata@durgavalves.com,

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

143/2A, Anna Nagar Road, Neelambur, Coimbatore-

641062Sales@mcwaneservices.co

Pressure RElief valves (Flow

Control Valve)

Up to 300 mm

PN 1.0 & PN 1.6

Without ISI mark

06/03/2021(Approval

for 3 years)DI

Howrah

41/2. "Q" Road, Belgachia, Howrah-711108, West

Bengalkamalavalves@rediffmail.c

omkamala1@vsnl.net

Float ValvesUp to 300

Without ISI mark

06/03/2021(Approval

for 3 years)

Flow Control valveup to 400

mm150# &

300#Without ISI

Altitude Control valve

up to 400 mm

150# & 300#

Without ISI mark

Altitude cum Flow Control Valve

up to 400 mm

150# & 300#

Without ISI mark

Flow Cum Pressure Control

up to 400 mm

150# & 300#

Without ISI mark

Pressure reducing Valve

up to 400 mm

150# & 300#

Without ISI mark

Liquid Service Relief Valve

up to 400 mm

150# & 300#

Without ISI mark

Ball ValveS/E

15 to 100 mm

150 & 250 With ISI mark

Ball ValveF/E

15 to 150 mm

150 & 250 With ISI mark

Foot valveScrewed

Up to 150 mm

Up to PN 1.0

Without ISI mark

Foot Valve Flanged

Up to 300 mm

Up to PN 1.0

Without ISI mark

Pressure reducing Valve

50 to 300 mm

-Without ISI

11/02/2022(Approval

for 3 years)

14M/s. Darling Muesco

(India) Pvt. Ltd., Ahmedabad

Plot no. 97/A, Phase-1, GIDC, Vatva, Ahmedabad-

382445sales@darlingmuesco.com

11/02/2022(Approval

for 3 years)

IS 989075, Industrial Estate Extention, Behind Sharp

Chucks, Jalandhar -144012info@aarko.insales@aarko.in

M/s. Aarko Manufacturing co.,

Jalandhar15

11/02/2022(Approval

for 3 years)

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & ClassApproval

Valid up to Date

Remarks

1 2 3 4 5 6

1M/s Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind

Aurobindo Hospital, sanwer Road, Indore-453111 (MP)

info@jashindia.com

Screens:- (i) Fine & Course Multi Rake Course Bar: 1 to 100 MLD(ii) Track rack screen

31-12-2019(Renewed

for 2 years)

M/s. Gardner Denver Engineered Products India pvt. Ltd., Ahmedabad

Plot No.878, Opp. Gallops Industrial Park, Sarkhej-Bavla Road, Village;- Rajoda, Bavla, Ahmedabad-382220krutesh,shah@gardenerdenver.cominfo.ahm@gardnerdenver.com

Air Blower:- Screw Type And Tri-Lobe Type11/02/2022(Approval for 3 years)

3M/s. Jash Engineering Ltd., Indore

Survey No. 74, Gram Bardari, Near Sanwer Road, Sanwer, Indore-452015

info@jashindia.com

(1) Grit Seperator (Detritor):- 10.5 m dia x 10.5 m x 1.5 m depth(2) Thickener (Sludge Thickener):- 26 m dia x 3.5 m depth

4M/s. Micro

Transmission Systems, Uttar Pradesh

C-23, Sector 85, Noida, Gautam Budh Nagar-201305, Uttar Pradeshinfo@microtransmissionsystems.com

(1) Screens:- Coarse Mechanical upto 1.600 m width x 10.8 m deep & fine up to 1.6 m x 3.6 m deep(2) Detritor/Grit Seperator:- upto 10.0 m x 10.0m x 1.0 m deep(3) Thickener (sludge Thickener):- upto 42 m dia x 4.0 m depth(4) Sludge Dewatering machine:- upto 60 meter cube per hour

5M/s. Triveni

Engineering & Industries Ltd., Noida

Water Business Group, A-44, Hosiery Complex, Phase-II Extn., Noida-201305,

Uttar Pradeshgeeta@ho.trivenigroup.com

wbg@projects.trivenigroup.com

(1) Screens:- Coarse Mechanical upto 4.1 m width x 2.3 m deep (2) Detritor/Grit Seperator:- upto 13.0 m x 10.0 m x 1.0 m deep(3) Thickener (Sludge Thickener) :- upto 20.3 m dia x 4.0 m depth

6M/s. Apollo Screens PVt. LTd., Chhatral (Gandhinagar)

Plot No. B-8 & 9, Dharti Apollo Ind Park, Chhatral- Kadi Road, Chhatral, Gandhinagar-382729rbgosain@apolloscreen.comamsheth@apolloscreens.com

(1) Screens:(i)Fine mechanical screen step type(ii)) Fine mechanical screen multi rack bar type(iii) Fine manual screen(iv) Multi rack bar screen for deep chaneel(v) Coarse manual screen(vi) Rotary drum screen(vii) Static Screen(viii) MBBR Screen for media retention(2) sludge thickener(3) Grit Seperator/ Detritor

7M/s. Aqseptence Group (I) Pvt. Ltd., Ahmedabad

Plot No. E-540, GIDC, Sanand -II Industrial Estate, Village:- Bol, Sanand, Ahmedabad-382170tirthankar.roy@aqseptence.com

(A) Screens:-(i) Coarse screen Mechanical & Manual(ii) Fine screen Mechanical & Manual(B) Vortex grit Separator

8M/s. Purchure

Engineers Pvt. Ltd., Pune

Plot no. C 4-23 MIDC Jejuri, Village:- Jejuri, Taluka:- Purandar, Pune,

Maharashtraanand@peplgroup.com

parchureengineers@gmail.com

(A) Sluice Gate: 2.4 m x 2.6 m(B) Screens:-(i) Mechanical Fine Screen:- 3.6 m x 1.55 m(ii) Mechanical Coarse screen :- 9.5 m x 0.5 m(iii) Manual Bar Screen: 3.6 m x 1.5 m(C) Thickener:- 6.5 m dia x 2.5 m depth(D) Grit Seperator:- 0.4 m dia Screw x 10 m (L)

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Different STP items as per Vendor Selection Report submitted by Different TPI

(As on dt. 23-1-2020)

gujarat water supply sewerage board psus as approved ... · approval over) 4 m/s. reliance...

Documents

reliance digital

professional reliance review submission - govtogetherbc ·...

33997946 reliance reliance comm employee welfare

reliance future income - reliance life insurance...

reliance industries_ar0607

38136743 reliance

reliance infratel limited - cmlinks.com · reliance...

what is an · 2019-01-23 · •reliance etf hang seng bees...

prospectus reliance one reliance insurance mutual fund

baldor reliance

reliance retail finance limited - reliance industries

reliance polymers 360o partnership. delivering...

reliance communications

reliance industries and reliance petroleum merger-t

77 - reliance jio info comm pte. ltd. - reliance industries

breaking news: reliance tunes into network18!...

how to request a reliance agreement requesting reliance …

iim-i telecom reliance communications (reliance...

reliance reliance comm. employee welfare

reliance manual for r8 r12 r128s4697+s4133+reliance... ·...