hard clad silica (low oh) technical data description · technical data hard clad silica (low oh)...

Technical Data

Hard Clad Silica (Low OH)

Anhydroguide™ APCH

THE FIBER OPTIC SOLUTIONS COMPANY

�berguideindustries

SM

DESCRIPTIONWith numerical aperature (N.A.) of 0.39 and a hard polymer cladding that allows a high core-to-clad ratio, theAnhydroguide™ APCH is the low cost �ber of choice. The pure fused silica (SiO2) used in the core ofAnhydroguide™ �ber is made by reacting silicon tetrachloride (SiCl4) with oxygen (O2) using a plasma arc ratherthan an oxy-hydrogen �ame. This ensures that the residual hydroxyl concentration (OH) will be low in the corematerial resulting in superior infrared transmission as compared with �ame prepared silica that is used in the companion product, Superguide™, which has superior ultraviolet (UV) transmission.

Fiberguide Industries

Fiberguide Industries, Inc., 1 Bay Street, Stirling, NJ 07980 Phone: 908-647-6601 Fax: 908-647-8464 info@�berguide.com www.�berguide.com

Form No: REF 723 DS025, Rev. 5/15/2008, Printed in the U.S.A. © Copyright 2007 Fiberguide Industries, Inc., Speci�cations subject to change without notice.

FIBER CROSS SECTION

FEATURES• Protects the �ber during bu�er stripping to prevent �ber breakage.• Provides e�cient light coupling and superior transmission in tight bends due to high numerical aperture.• Strong bonding of the hard polymer to silica prevents relative movement of these materials in the �ber structure

as the ambient temperature changes. This movement is sometimes referred to as “pistoning” and it can cause serious problems at connectors and other types of �ber terminations if not properly dealt with.

• High concentricity and core-to-clad ratio.• Allows for excellent connection alignment, �ber core positioning and high transmission bundles.• Hard polymer cladding is removable, with acetone, enabling low-cost, highly reliable, custom end designs.• Broad operating wavelength range from 550nm to 2100nm.• Excellent for Holmium (2100nm) and Erbium (1540nm) laser delivery.• All dielectric non-magnetic construction.• The core, clad and bu�er materials have been certi�ed to USP Class VI for non-toxicity and biocompatibility.• Optical �bers and assemblies can be sterilized by ETO and gamma.• Radiation resistant.

1

Radius

Inde

x

REFERENCE SUMMARY

Product Category:Fiber

Mode:Step Index, Multimode

Type:Hard Clad Silica (Low OH)

Trade Name:Anhydroguide™ APCHVIS-IR

Technical Data

Tefzel Bu�er

Hard Clad

Silica Core

Bu�er - Available in clear or blue Tefzel® and clear nylon.

APPLICATIONSSensors/IndustrialControls/Illumination• Make/Break• Distance• Temperature• Liquid level• Proximity• Chemical analysis• BiotechnologyIndustrial/Scienti�c DiagnosticInstrumentation/Devices• Spectrophotometer• Gas/liquid chromatography• Flame pyrometer• Cytometry

• DNA sequencingMedical/Dental• HO:YAG

- Orthopedics for arthroscopy- Urology for lithotripsy- ENT for endoscopic

sinus surgery- Spine surgery for

endoscopic disc removal- Prostate removal (TURP)

• ER:YAG Laser- Dental- Tissue ablation

• Nd:YAG Laser- Hair removal

• Diode Laser- Hair removal- Periodontal surgery- Treatment of leg and

facial veins• Variable Pulse YAG Laser

- Skin resurfacing- Surgery and treatment of

benign, pre-malignant and multiple pathologic skin conditions.

Short-haul Data Transmission• In-plant systemsOrdnance Initiation• Carries signal for launch/detonation

435 Route 206Newton, NJ 07860(973) 579-7227www.thorlabs.com

This fiber is supplied to you by...

Technical Data

Hard Clad Silica (Low OH)

Anhydroguide™ APCH

THE FIBER OPTIC SOLUTIONS COMPANY

�berguideindustries

SM

SPECTRAL ATTENUATION(Typical)

Fiberguide Industries

Fiberguide Industries, Inc., 1 Bay Street, Stirling, NJ 07980 Phone: 908-647-6601 Fax: 908-647-8464 info@�berguide.com www.�berguide.com

Form No: REF 723 DS025, Rev. 5/15/2008, Printed in the U.S.A. © Copyright 2007 Fiberguide Industries, Inc., Speci�cations subject to change without notice.

2

Anhydroguide™ APCH Attenuation

90%95%

97.7%

99%

99.8%

Tran

smis

sion

/m

Att

enua

tion

(dB/

km)

1000

100

10

1

Wavelength (nm)

0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400

FIBER SPECIFICATIONS• Standard Secondary Bu�er

Coating1: Tefzel® 750 Clear• Operating Temperature:

-60°C to +125°C• Numerical Aperture 2:

0.39 ± 0.02 (Full Acceptance Angle 46°)

• Certi�ed To: 100kpsi• Maximum Attenuation:

5 dB/km @ 810nm / 6 dB/km @ 1062nm

Note: The �bers in the followingtable carry a designation “APCH”standing for “Anhydrous PolymerClad Hard”, followed by the coreand cladding diameters (in microns)and concluding with the su�x “Z”that designated clear Tefzel® bu�er.See note below for other bu�er colors and material options.

Technical DataREFERENCE SUMMARY

Product Category:Fiber

Mode:Step Index, Multimode

Type:Hard Clad Silica (Low OH)

Trade Name:Anhydroguide™ APCHVIS-IR

435 Route 206Newton, NJ 07860(973) 579-7227www.thorlabs.com

This fiber is supplied to you by...

Hard Clad Silica (Low OH)

Anhydroguide™ APCH

THE FIBER OPTIC SOLUTIONS COMPANY

�berguideindustries

SM

FIBER SPECIFICATIONS

Fiberguide Industries

Fiberguide Industries, Inc., 1 Bay Street, Stirling, NJ 07980 Phone: 908-647-6601 Fax: 908-647-8464 info@�berguide.com www.�berguide.com

Form No: REF 723 DS025, Rev. 5/15/2008, Printed in the U.S.A. © Copyright 2007 Fiberguide Industries, Inc., Speci�cations subject to change without notice.

Fiberguide Industries Customization ProgramFiberguide Industries is a full service custom �ber and value-added assembly provider. If you have unique requirements, please contact us to discuss tailoring a product or design to optimize optical performance for your speci�c application.

3

Technical Data

Low OH Product Code APCH200/230Z APCH300/330Z APCH400/430Z APCH600/630Z

Core Diameter 200µm ± 5µm 300µm ± 6µm 400µm ± 8µm 600µm ± 12µmClad Diameter 230µm ± 5µm 330µm ± 10µm 430µm ± 10µm 630µm ± 10µmBu�er Diameter 500µm ± 30µm 650µm ± 30µm 730µm ± 30µm 1040µm ± 50µmBandwidth-Length Product

@ 820nm 20MHz-km 15MHz-km 13MHz-km 9MHz-kmMaximum Core/Clad O�set 5µm 5µm 7µm 9µmMaximum Power Capability

-CW2 0.2kW 0.5kW 0.8kW 1.8kW-Pulsed3 1.0MW 2.3MW 4.0MW 9.0MW

Minimum Bend Radius-Recommended Short Term4 20mm 30mm 40mm 60mm-Recommended Long Term5 40mm 60mm 80mm 120mmTypical Standard Length 1100m 500m 300m 100m

Low OH Product Code APCH800/830Z APCH1000/1035Z APCH1500/1550Z

Core Diameter 800µm ± 16µm 1000µm ± 20µm 1500µm ± 35µmClad Diameter 830µm ± 10µm 1035µm ± 15µm 1550µm ± 31µmBu�er Diameter 1040µm ± 62µm 1400µm ± 70µm 2000µm ± 100µmBandwidth-Length Product

@ 820nm - - -Maximum Core/Clad O�set 9µm 10µm 15µmMaximum Power Capability

-CW2 3.2kW 5.0kW 11.3kW-Pulsed3 16.0MW 25.0MW 56.6MW

Minimum Bend Radius-Recommended Short Term 4 80mm 100mm 150mm-Recommended Long Term 5 160mm 200mm 300mmTypical Standard Length 50m 10m 2m

NOTES1 - Bu�er also available in Blue Tefzel®(su�x “C”) and Clear Nylon (su�x “N”) Certi�ed to 100kpsi.2 - 2 meters, 50% intensity: uncoated and mode stripped.3 - Based on 1 MW/cm2 for 1064nm ND:YAG laser and input spot size equal to 80% of the core diameter.4 - Based on 5 GW/cm2 for 1064nm ND:YAG laser with 10nsec. pulse length and input spot size equal to

80% of the core diameter.5 - Recommended geometric strain is 50% of proof test level, based on statistical analysis of �ber failures.

REFERENCE SUMMARY

Product Category:Fiber

Mode:Step Index, Multimode

Type:Hard Clad Silica (Low OH)

Trade Name:Anhydroguide™ APCHVIS-IR

435 Route 206Newton, NJ 07860(973) 579-7227www.thorlabs.com

This fiber is supplied to you by...