harley davidson 94~03 sportster installation instructions ... · harley davidson 94~03 sportster...

Harley Davidson 94~03 SPORTSTER

#H3533 Bobber Style Rear Fender TypeII kitInstallation Instructions

Before installation, thoroughly familiarize yourself with the instructions and illustrations. After installation, make sure all components fit and function correctly before use.

Bobber Style Rear TypeII

Side Support

Spacer for Grommet

Grommet

Button Head Screw M8 x 35

Flunge Nut

Wiring Sticker

*required drilling hole on proper portion when put any taillight or double seat

OEM Bolt

OEM Bolt, Washer, Nut

OEM Washer

OEM Washer

Step1. Remove seat and turn signals and taillight wiring.

Step2. Remove right and left struts and rear fender.

Step3. Install (3)Spacer, (4)Grommet on (1)Bobber rear fender, and install Wiring Box using OEM Bolt.

Step4. Refer to the drawing above, install (1)fender using (2)Side Supports, (5)Bolts, (6)Nuts, and OEM hardware.

*Be careful not to interfare fender and any wirings. Use (7) Wiring Sticker for proper portions.

Step5. Install seat, check fastened bolts, nuts and every hardware, lighting turn signals and taillight.

WEST-EAGLEMOTORCYCLE PRODUCTS