how to apply adhesive hook

GUANGZHOU PRODIGY DAILY-PRODUCTION CO., LTDNO.62, BOAI ROAD, TANZHOU, DAGANG TOWN, NANSHA, GUANGZHOU, CHINA

To Apply Hook：

1. Ensure the surface is clean, dry, and free from dust.

2. Mark exactly where the hook will be placed, as repositioning will cause the adhesive to weaken.

3. Peel off the release paper from one side – do not touch adhesive.

4. Place on the back surface of the hook, arrows pointing down, pressing firmly to ensure good contact.

5. Peel off the other release paper – do not touch adhesive.

6. Place in the required position and press firmly to ensure good contact, leaving for 12 hours before use.

7. Hang the items.

NOTE

The hook is not suitable for applications to surface over 40℃.

To apply to surface of less than 10℃, warm up the tape and the surface with a hair dryer. Apply while

warm.

Do not use on delicate wallpaper, antiques, or valuable items.

http://www.gzprodigy.com ATTN: SASA EMAIL: SASA@GZPRODIGY.COM.CN SKYPE: sasa.cn TEL: 0086 20 3493 4376

Clean surface Peel off the release backing tape

Position the hook, press firmly for 60 seconds to ensure good contact Leave for 12 hours before use

GUANGZHOU PRODIGY DAILY-PRODUCTION CO., LTDNO.62, BOAI ROAD, TANZHOU, DAGANG TOWN, NANSHA, GUANGZHOU, CHINA

Removable Adhesive Hook

Permanent Adhesive Hook

http://www.gzprodigy.com ATTN: SASA EMAIL: SASA@GZPRODIGY.COM.CN SKYPE: sasa.cn TEL: 0086 20 3493 4376