how to do flash firmware acrowhoop v2 - furious fpv to do flash... · how to do flash firmware...

How to do Flash Firmware Acrowhoop v2

Prepare:

- BetaFilght app on Google chrome: Click Here

- Firmware Betaflight 3.1.0s for Acrowhoop V2 : Click Here

Let’s go:

Step 1: Open Betaflight and plug USB connect Acrowhoop with PC.

When you plug USB, at the Com Port number will appear or auto change Com number.

If PC don’t detect Acrowhoop please install driver for your PC.

Latest CP210x Driver can be downloaded from here

Lastet STM USB VCP Driver can be downloaded from here.

Step 2: Click Firmware Flasher tab to go to Flash FC interface

Step 3. Load Firmware and Flash Acrowhoop.

- First, click Load Firmware [Load], Windows appear a Windows Explorer, at this Windows

Explorer you go to folder have file Firmware Acrowhoop V2 and open file firmware.

- After click Open file, you will come back Betaflight Firmware Flasher interface and you can see

Flash Firmware isn’t hidden and click it to begin flash.

When you click Flash Firmware, interface of processing flash firmware same as below picture.

Note: While Flashing, please don’t un-plug USB.

When you see like as this picture, that mean you flash firmware succeseful.

Your firmware should now be loaded and you are ready to bind your craft and fly.

.