how to install pool pumps | installation of swimming pool pumps - pumpkart.com

Post on 17-Aug-2015

152 Views

Category:

Technology

5 Downloads

Preview:

Click to see full reader

TRANSCRIPT

How To Install A Pool Pump

Welcome To www.pumpkart.com

Get A Professional Advice For Pool Pump Installation & MaintenanceThis is an Easy way To Install the

Pump !

So to help you get

started with saving on

installation, we’ve come

up with this guide on

HOW TO INSTALL YOUR

POOL PUMP TO WORK

SMOOTHLY!

First, let’s start by taking a look at the following diagram to get an idea of how your pool pump and filter can look after Installation

A POOL PUMP is an important part of the overall filtration system and requires correct sizing and installation to be effective.

Too large will prevent good water flow during filtering and backwashing.

Too small will not handle the power of the pump.

Consider A Correct Size Filter To Accompany The Pump

For Above Ground pools up to and including a 24-foot round, a 1 HP Motor Pump is a correct size.

For a Larger pool 1 ½-HP Pumps.

Consider Correct Size Water Pump

Pipe Assembly

Electrical Connection

Controls Prior to Initial Start-up

SWIMMING POOL PUMPS INSTALLATION INITIATED BY SETTING UP

1

2

3

Correct installation is very important for Draining, Cleaning & Refilling Of A Swimming PoolBy following the given instructions all these tasks can be done easily

Draining Cleaning Refilling

DRAINING AND REFILLING OF YOUR POOL

Skimmer

Use a submersible sump pump to empty your pool easily.

Set up the sump pump and discharge hoses correctly to a clean out the water from pool.

Draining Pump

Where to drain the water is a very important concern. You can use it to irrigate the plants in your home lawn and other shrubbery area.

Lower the pump into the pool and plug it in power supply.

Make sure the hose is properly attached.

Make sure to lodge it in properly.

Cleaning Swimming POOL

After draining splashing around is important to clean out any obstruction that may slow down swimming pool drainage system.

Take a certified electrician help to finalize the location with a Ground Fault Interrupt Circuit.

The location of the pump be close to the pool, but not underneath a deck.

The pump should have ample ventilation to prevent overheating.

Safety Concerns

Place the pump correctly to make sure it is vibration free.

Attach the pump to the pump base

It should be accessible for servicing as well.

Recheck all connections and power if it is not working.

Safety Concerns

To Buy Best Priced Pumps For Various Use In A Swimming POOL

Visit at Pumpkart.com

Why To Shop Swimming POOL Pumps Online

Cycling of your pool’s water once per day is considered sufficient. It is a great way to saving energy and money around your home.

THE PUMP SHOULD NEVER OPERATE DRY

WE CAREFUL FOR START-UP OPERATION

MAINTENANCE AND CLEANLINESS

top related