ht back resize - cdn.thomasnet.comcdn.thomasnet.com/ccp/01300068/37325.pdf · hot tapping phone:...
Post on 18-Oct-2020
4 Views
Preview:
TRANSCRIPT
The BasicsHot Tapping is the ability to safely tie into a pressurized system while it is on stream and under pressure.
Typical connections consist of a tapping fitting, isolation valve, and hot tapping machine. The hole saw is
advanced through the valve, to the pipe. The machine is engaged and the cut begins. When the cut is
finished, the machine is disengaged and retracted beyond the gate of the valve. The valve is closed and the
machine is removed.
Coupon retention is made possible by a
few different methods. The most reliable
and most common is the double-wired
pilot drill. A catch wire is placed at the end
of the pilot drill. When wall penetration is
complete, the wire drops into position and
retains the coupon.
Why Hot Tap?• New Connection
• Product Sampling Point /
Product Determination
• Installing Instrumentation Equipment
• Draining of a Piping System
• Internal Pipeline Inspection
Hot taps can be performed on most any type of pipe, ranging from carbon steel to PVC. Taps are done on
lines containing water, oil, gases, fuels, steam, and many other chemicals.
1 2 3
The ability to safely tie-in to a pressurized system while under full operating conditions.
Koppl Pipeline Services, Inc.1228 Date Street
Montebello, CA 90640Phone: (323) 888-2211Fax: (323) 888-2232
The ability to safely tie-in to a pressurized system
Hot Tapping
Phone: (323) 888-2211 Fax: (323) 888-2232 www.koppl.com
Angled Hot Tap
Valveless Connections
Koppl can perform hot taps in almost any situation. From tight locations in buildings to open trenches in the field, we have the right equipment for your application.
These fittings are used when valves are not required at the point
of connection. A temporary valve is used to make the hot tap,
then removed. All this accomplished is with no interruption of
service. Can also be used for purging and bypassing.
Koppl has the ability to tie into your system in many different ways. Angle taps, valveless connections, long travel taps, and other methods are available to complete your connection in the most efficient manner possible.
Mueller® Flanged Tee Mueller® Save-a-Valve® Drilling NippleMueller® and Save-a-Valve® are registered trademarks of Mueller Co.
TappingMachine
Catch Wire
Coupon
Pilot Drill
Pipe IsolationValve
TappingFittingTypical Hot Tap
Confi guration
Pipe TappingTappingTFittingTypical Hot Tap
Hot TappingKoppl Pipeline Services, Inc.
1228 Date StreetMontebello, CA 90640Phone: (323) 888-2211Fax: (323) 888-2232
Phone: (323) 888-2211 Fax: (323) 888-2232 www.koppl.com
top related