ideas made to move · 2020. 7. 30. · ford transit connect. mobility van . w/flexflat ramp....

Features

• ADA and FMVSS compliant • Fits a single wheelchair plus five passengers• Ideal for group homes, senior living, hospitality, and more• Holds up to five ambulatory (incl. driver) and one wheelchair passenger • Exclusive FlexFlat ramp comes standard with Transit Connect • Folds flat to create usable deck when not in use, providing cargo room for luggage and other passenger items • Middle-row 60/40 OEM seats kept intact for ideal multi-use capacity• Fold-down, tumble forward middle row seats provides for open space and driver interaction with wheelchair passengers • Auto-retracting wheelchair securement system• Best-in-Class 26 MPG average combined driving• Ford pool account savings

Key Specifications • 58.5” door opening height• 52” door opening width• 31.5” ramp width; 58.5” length• 9 degree ramp angle• 800 lbs ramp capacity• 48” width between wheelbox • 51” lowered floor length

FORD TRANSIT CONNECTMOBILITY VAN w/FLEXFLAT RAMP

Ideas made to move

Driverge Vehicle InnovationsPh. 844-629-5238 • Driverge.com

Middle-row OEM seats are kept intact.

A Wheelchair Ramp that Folds Flat When Not in Use!

VerticalVertical

FlatFlat

Our exclusive FlexFlat design creates a usable deck like a standard minivan. Perfect for luggage, boxes, cargo, golf clubs and more.

Ramp is shown in vertical upright position when a wheelchair passenger is in the vehicle.

Driverge Vehicle Innovations • Ph. 844-629-5238 • Driverge.com

FORD TRANSIT CONNECTMOBILITY VAN w/FLEXFLAT RAMP

Driverge is one of the country’s leading builders of commercial shuttles, wheelchair accessible vans, transporters and taxis. With more than 140,000 square feet of production space in Ohio, Kansas, and South Carolina, Driverge is building and shipping innovative transit vehicles throughout North America.

We are a Ford Qualified Vehicle Modifier (QVM) and Ford’s largest mobility pool for more than 15 years. All of our vehicles meet or exceed FMVSS and NHTSA standards. We are members of TLPA, NTEA MVP, and NAFA, with sales and service supported by a national network of more then 200 affiliated dealer locations.

About Driverge

Specifications

VEHICLE SPECIFICATIONSRear door opening height 58-1/2”

Rear door opening width 52”

Interior height (mid-section) 56-1/2”

Max. interior width @ at B-pillar 58-1/2”

Lowered floor length 51”

Width between wheelbox 48”

Ramp width 31-1/2”

Ramp length 58-1/2”

Ramp capacity 800 lbs.

Ramp angle 9 degrees

Wheelbase 120.6”

60/40 rear seats tumble forward and fold into floor

Retractor wheelchair anchoring system in front

Fixed securement anchors in rear

Spare tire with cover mounted on drivers side wall

Ramp will lay flat for cargo storage when not transporting a wheelchair occupant