installation manual for control4 driver of zodiac aqualink...

Kvicaapps.com support@kvicaapps.com

Installation Manual for Control4 driver of

ZODIAC Aqualink RS serial adapter

Kvicaapps.com support@kvicaapps.com

POOL  CONTROLLER  SETUP  INSTRUCTIONS  ..............................................................................................................  3  

SUPPORTED  CONTROL4  VERSIONS  ..........................................................................................................................  4  

DOWNLOADING  DRIVER  ..........................................................................................................................................  4  

INSTALLING  DRIVER  ................................................................................................................................................  4  

LOADING  DRIVER  TO  YOUR  PROJECT  .......................................................................................................................  5  

LIGHT  DRIVER  ........................................................................................................................................................  10  

TROUBLESHOOTING  ..............................................................................................................................................  11  

Kvicaapps.com support@kvicaapps.com

Pool controller setup instructions Connect ZODIAC Aqualink RS adapter to RS232 port on Control4 system.

Make sure that pool controller is set to 9600 bps.

Kvicaapps.com support@kvicaapps.com

Supported Control4 versions Driver is written for Control4 OS version 2.6 and higher. (*.c4z) Downloading driver You can purchase and download ZODIAC Aqualink RS driver from kvicaapps.com in few simple steps:

1. Create account when you visit our website 2. Log-in and purchase driver, you will receive licence code via email 3. Download driver

Installing driver Copy all c4z files to drivers folder on your PC, My Documents -> Control4 -> Drivers Driver can be found by filtering devices by manufacturer.

Kvicaapps.com support@kvicaapps.com

Loading driver to your project Add ZODIAC Aqualink RS driver to your project.

Kvicaapps.com support@kvicaapps.com

Set correct number of AUX outputs, driver will poll their status so do not add more than you need, you will be able to add more later if you need to do so. You may need to refresh properties page (click on other driver and back on pool controller )in order to be able to add/define your auxiliary outputs.

Kvicaapps.com support@kvicaapps.com

Define your auxiliary outputs.

Kvicaapps.com support@kvicaapps.com

Activate licence, paste license key into the license key property and click set. License status will change to valid and Customer Name and email will update as well.

Kvicaapps.com support@kvicaapps.com

Connect driver to correct RS232 port on Control4 system.

Driver is ready for use.

Kvicaapps.com support@kvicaapps.com

Light driver Add ZODIAC light driver to your project.

Kvicaapps.com support@kvicaapps.com

Connect light driver to correct auxiliary output.

Troubleshooting If driver pool controller doesn’t respond to Control4 system:

1. Check RS232 connection between Control4 system and pool controller 2. Check that driver is connected to correct RS232 port on Control4 system 3. Check that “License status” shows valid license