instruction manual for next level racing wheel stand racer

INSTRUCTION MANUAL FORNEXT LEVEL RACING®WHEEL STAND RACER

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

®

Thank-you for purchasing a

WHEEL STAND RACER

If you require any support with your product please contact our friendly team at:

support@nextlevelracing.com for a prompt response.

WARNING-Please do not use power tools for assembly as over

tightening can damage your frame.-During assembly please be sure to have a washer positioned

at the front of every bolt as pictured below.

WARNINGCHOKING HAZARD - Small parts not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths

WHEEL STAND RACER

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

What’s In The Box:

WHEEL STAND RACER FRAME

4 X ADJUSTABLE FEET

1 X M8 ALLEN KEY

1 X WRENCH

6 X M6 15MM

6 X M6 WASHERS

4 X M6 NUTS

2 X CABLE MANAGEMENT CLIPS

1 X M6 ALLEN KEY

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

WHEEL STAND RACER

Step 1:

Unpack and unfold the wheel stand. Clip on the U-bolt to secure wheel support.

U boltPedal Bar

Wheel Plate

WHEEL STAND RACER

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

PEDAL ADJUSTMENT:

Tip – For quick pedal distance adjustment just loosen the 8 bolts pictured and then slide pedal bars further or closer.

Then tighten the 8 bolts to lock in position

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

WHEEL STAND RACER

ADJUSTABILITY

4 X ADJUSTABLE FEET

WHEEL STAND RACER

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

ADJUSTABILITY

Before use and for rigidity, ensure that all nuts and bolts tightened. All nuts and bolts should be checked regularly and tightened if necessary. If not checked regularly, bolts

can loosen and components may become detached and cause injuries.

1. WHEEL ANGLE

2. HEIGHT ADJUSTMENT

3. PEDAL BAR DISTANCE ADJUSTMENT

2. HEIGHT ADJUSTMENT

WHEN ADJUSTING WHEEL PLATE ANGLE,ONLY USE 1 BOLT.

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

WHEEL STAND RACER

If you require any support with your product please contact our friendly team at:

support@nextlevelracing.com

for a prompt response.

NEED ASSISTANCE?

ASSEMBLY VIDEO:

SHOP THE RANGE

For assistance please contact: support@nextlevelracing.comwww.nextlevelracing.com

WHEEL STAND DD SINGLE FREE STANDING MONITOR STAND

GTULTIMATE COCKPIT FLIGHT COCKPIT

TRIPLE FREE STANDING MONITOR STAND

GTTRACK COCKPIT

F-GT COCKPIT MOTION PLATFORM V3 TRACTION PLUS MOTION

For assistance please contact: support@nextlevelracing.com

®