instruction package pendant pendant.pdf · pendant “helios” step 1 step 2 swarovski elements...
Post on 23-Aug-2020
3 Views
Preview:
TRANSCRIPT
INSTRUCTION PACKAGE
“HELIOS”PENDANT
2 /7 WWW.CREATE-YOUR-STYLE.COM
Step 2
INSTRUCTION PACKAGE
PENDANT “HELIOS”
STEP 1
STEP 2
SWAROVSKI ELEMENTS Supplies & Tools
Article Product Group Article No. Amount Size Color Color Code
Crystal Pearls 5810 2 pcs. 4 mm Crystal Dark Grey Pearl 001 617
Crystal Pearls 5821 1 pc. 11 x 8 mm Crystal Dark Grey Pearl 001 617
Pendants 6040 1 pc. 40 mm Indicolite 379
Supplies
Chain, silver, 1 mCord, grey, 1 mm, 2 m3x Head pin, silver1x Jump ring, silver, 12 mmSatin ribbon (fl at), grey with white dots,
8 mm, 30 cm
Tools
Flat nose pliersRound nose pliersScissorsSide cutterTape
Level of design: BEGINNERS
Have also a look at the text instruction at the last page!
Wiring
Knotting
3 /7 WWW.CREATE-YOUR-STYLE.COM
30 cm
2.5 cm
2.5 cm
1m x21 m 1mm
p
STEP 3
STEP 4
Repeat
5 cm
Repeat
4 /7 WWW.CREATE-YOUR-STYLE.COM
2 cm
Step 5
Step 6
Repeat step x1
STEP 5
STEP 6
Repeat step x1
5 /7 WWW.CREATE-YOUR-STYLE.COM
STEP 7
Step 7
6 /7 WWW.CREATE-YOUR-STYLE.COM
Step 7
7 /7 WWW.CREATE-YOUR-STYLE.COM
STEP 1: Slide one Swarovski Crystal Pearl article 5821 11 x 8 mm Crystal Dark Grey Pearl onto a head pin and form
a loop. Cut off excess wire.
STEP 2: Open a 12 mm jump ring and slide on the Crystal Pearl headpin and one Swarovski Pendant article 6040
40 mm Indicolite as shown in the illustrations.
STEP 3: Cut a fl at 30 cm ribbon and tie a bow around the Pendant. Trim both ends to 2.5 cm as shown.
STEP 4: Cut a 1 m chain and two 1 m cords, place them together and attach one side with tape. Begin braiding them
together leaving 5 cm at the top and bottom upbraided.
STEP 5: Tie a knot with both ends as indicated in the illustrations and cut off the cords and the chain using a side
cutter and scissors leaving 2 cm on ends.
STEP 6: Slide one Swarovski Crystal Pearl article 5810 4 mm Crystal Dark Grey Pearl onto a head pin and form a loop.
Repeat this step once. Attach both Crystal Pearls headpins onto the chain ends as shown.
STEP 7: Open the 12 mm jump ring that is attached to the Swarovski Pendant with the bow and attach it onto center
of braided cord and chain as shown in the illustrations.
INSTRUCTION PACKAGE
PENDANT “HELIOS”
top related