intro adamscar fsae
Post on 10-Oct-2014
136 Views
Preview:
TRANSCRIPT
Introduction to Adams/Car for Formula SAE
Joseph Little, MSC Technical Support
April 14, 2011
2
MSC Software Corporation
Agenda
• Getting Access to the Software and Resources
• Running simulations with the FSAE database
• Modifying the template to represent your Car
• Conducting a Design Study
• Questions
3
MSC Software Corporation
Suggested Strategy for Getting Started
4
MSC Software Corporation
Getting Started Tutorials
Select Adams Help from the Help menu then navigate to the getting started
section. Though the demo vehicle appear much more elaborate than the
FSAE model, they are actually very similar, and the Getting Started tutorials
are directly applicable to the FSAE template for the most part.
5
MSC Software Corporation
Using the FSAE Database
• Register on mscsoftware.com to get access to SimCompanion
• Visit the article “Using the special FSAE database with MD Adams/Car 2010” at
http://simcompanion.mscsoftware.com/infocenter/index?page=content&id=KB8019488
• Download the template files follow the instructional .pdf
6
MSC Software Corporation
How to Get Help
• Help Docs• Start at the TOC and work down to your topics
(Remember PostProcessor is under Adams Basic Package)
• Use Context Help (F1 in appropriate text boxes)
• Text Search/Index
• SimCompanion• Search SimCompanion for Keywords
• VPD Forums• Search for posts for similar issues
• Post in Adams University Section
• Technical Support• Have your Designated Contact email Technical Support at
support@mscsoftware.com
7
MSC Software Corporation
Types of Simulations
Suspension Testrig
Full Vehicle Simulation
8
MSC Software Corporation
Suspension Testrig
• Kinematic Analysis
• Bump (Parallel)
• Roll (Opposite)
• Steering (None, Fixed,
Free, Controlled)
• Dynamics Analysis
9
MSC Software Corporation
Suspension Results Analysis
• Analyze Results
• Display Animations
• Graph Results
10
MSC Software Corporation
Full Vehicle Simulation
• Predefined Analysis
• Basic Maneuvers
• Acceleration
• Braking
• Maintain Steer Angle
• Some Combination of
Above
• Closed Loop
• Maintain Specified
Radius
• Achieved Specified
Acceleration
11
MSC Software Corporation
Full Vehicle Simulation (cnt’d)
• User Defined Simulations
• Event Builder - Define
maneuvers with open
loop constants/functions
or closed loop objectives
• Road Builder – Define
Custom roads for path
optimization and
SmartDriver
12
MSC Software Corporation
Modifying Your Vehicle
• Hardpoints
• Masses
• Property Files
• Tires
• Shocks
• Powertrain
• Aero Forces
• Adding/ Removing /Modifying Parts, Joints, etc.
• Swapping Subsystems
• Modifying Templates
13
MSC Software Corporation
Hardpoints
• Most Define the Center or Axis of a Rotational Joint
• Defines Geometries
• Mirrored
• Edit in table editor
• Listed in .sub file
14
MSC Software Corporation
Property Files
• Tires
• PAC2002 FSAE property files available from TTC
http://www.millikenresearch.com/
• Springs/Dampers
• Curve Editor
• Property Files
• Drivetrain/Powertrain
• Engine Torque Curve
• Differential Property File
• Engine/Transmission Parameters
15
MSC Software Corporation
Mass and Setup Parameters
• Right Click >> Modify to Change Mass
• Mass can be calculated using geometry and
custom density
• Suspension Setup Parameters used for certain
Analysis/Results
16
MSC Software Corporation
Suspension Modeling Tutorial
An in-depth suspension modeling tutorial can be found in SimCompanion:
http://simcompanion.mscsoftware.com/infocenter/index?page=content&id=KB8019810
Thank you for your attendance!
top related