ion de cable para inversores mitsubishi
Post on 07-Apr-2015
27 Views
Preview:
TRANSCRIPT
Información de cable para inversores Mitsubishi
There is a cable available from Mits, SC-FRPC. This cables allows you to plug the cable
from PC to VFD directly. It has a 9 pin female connector with built-in RS232/RS485
converter and a RJ45 connector.
If someone has more info about this cable, then it would be useful to post it here. All
info I have now is the following pinouts on the RJ45 plug.
1 -> SG
2 -> P5S
3 -> RDA
4 -> SDB
5 -> SDA
6 -> RDB
7 -> SG
8 -> P5S
P5S is the supply to the PU unit.
Also, it appears that the default
comms parameters are:
Adress: 0
Baud: 19200
Data: 8 bits
Stop: 2 bits
Parity: Even
To easily verify the integrity of your cable, use the Mits drive setup software:
FR-SW1-SETUP-WE.
top related